Notification(Mail) when an Idoc is sent or received

Hello,
My scenarios,
1. Whenever an Idoc say MATMAS05 fails in the ECC a mail should be triggered to a user.
2. Similarly when an Idoc is successful, a mail should be triggered to a user.
Kindly help me getting the configuration steps done.
Regards,
Abhishek

Hello,
In WE42, for inbound process code, we have these details
Function Module                               Idoc_input_matmas01
Maximum Number of Repeats           0
Object Type                         IDPKMATMAS
End Event                           MASSINPUTFINISHED
Object Type                         IDOCMATMAS
Start Event                         INPUTERROROCCURRED
End event                           INPUTFINISHED
Success Event
Object Type                         BUS1001006
Start event <blank>
so is there an workflow associated with this BOR object
or will i have to create an workflow.
And the details you mentioned a complete bouncer
Regards,
Abhishek

Similar Messages

I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. Help!

I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. In one case, a message someone had sent to me wound up in the mailbox of a third person, who was not included in the address list!! I have only two accounts, and have checked everything; only one account is showing the repeats Now, that account is my professional account, and it resides in three places: I use it on the laptop described here, I use it through Apple Mail on the much newer desktop Mac in my office, and I can run it through Web mail on my employer's server, which is where the professional account resides (I have a mailbox there, etc.) That program is called Zimbra.
My personal account is with Earthlink and is not doing the repeats. I access it either through my MacBook's Apple Mail or the Web; the Apple Mail on my office Mac is not configured to access the Earthlink server.
What IS going on here?? My friends, colleagues, and students (I teach college) are mystified by these ancient messages.
Thanks for any help!!

I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. In one case, a message someone had sent to me wound up in the mailbox of a third person, who was not included in the address list!! I have only two accounts, and have checked everything; only one account is showing the repeats Now, that account is my professional account, and it resides in three places: I use it on the laptop described here, I use it through Apple Mail on the much newer desktop Mac in my office, and I can run it through Web mail on my employer's server, which is where the professional account resides (I have a mailbox there, etc.) That program is called Zimbra.
My personal account is with Earthlink and is not doing the repeats. I access it either through my MacBook's Apple Mail or the Web; the Apple Mail on my office Mac is not configured to access the Earthlink server.
What IS going on here?? My friends, colleagues, and students (I teach college) are mystified by these ancient messages.
Thanks for any help!!

Time out when seinding Idocs from XI to receiving system

Hi All,
we have implemented a file to Idoc scenario in our XI test environment.
When sending more than one file at a time (containing one record -> 1 Idoc after conversion) XI creates the Idocs but gets a time out when passing the Idocs to the receiving SAP 4.6C system. We find the messages blocked in transaction SM58 with the status message "Transaction recorded" and on the XI system short dumps are created with the time out error message.
Does anyone know this problem and can give us some hints how to resolve it ?
Thanks in advance,
Christiane

Christiane,
Check your partner profiles in the target R/3 system. Use Tcode WE20 and check the inbound parameters option to see if the radio button 'Process Immediately' is switched on. If yes, change this to 'Process by background program'.
This way, the IDOC will be created in your system with status 64. You can then use program RBDAPP01 in the R/3 system to post these IDOCs to application.
The reason I say this is, sometimes, posting applicaitons may take a long time thereby resulting in timeout. If this is not the actual reason, atleast this will lead you to the correct problem.
Try this and let me know what's happening.
KK

ON MY IPHONE 3GS, IS THERE A WAY TO SEE WHEN OLD TEXTS WERE SENT OR RECEIVED

I have a bunch of old texts on my iphone and i want find out when i sent them or they were sent to me. It shows time and date for the last couple texts but not the old ones. Is there a way of showing the old times and dates?

If you don't see it on your phone, you might be able to get a detailed printout of your phone bill.

Sending Human Task notification mail to a assignee not found in LDAP

Hi All,
I have 2 requirements:
1. Suppose i have a HumanTask which sends a notification mail to the assignee when the task is assigned to him/her.
    In our process we are first checking if the assignee's email address is present in LDAP using the BPEL variable that holds the assigneeID.
    If it is not present in LDAP, then we are getting the email address from database before the invocation of the HumanTask.
    Now, as the emailaddress is not found in LDAP, so when the HumanTask is invoked the notification mail will not be sent to the assignee.
    So, we have used a separate email activity after the invocation of HumanTask to send the notification mail to the assignee using his emailaddress that we fetched from the database.
    I don't want to use this separate email activity and wanted to know if there is any other alternative to send the notification mail during invocation of the HumanTask using the emailaddress that
    we fetched from the database?
   Basically i want to know if there is any other way to send the notification mail when a task is assigned and the assignee's email address is not found in LDAP?
2. Is it possible to send a Human Task's outcomes as links in an email activity body?
   Actually, i am sending a mail to a user using the email activity. Before that a HumanTask is present in my BPEL process.
   I want to send the HumanTask's outcomes as links in the email that i am sending to the user using the email activity just as they get displayed in the notification mail when HumanTask's "Make
   notification actionable" feature is selected.
Please help me with the above requirements.
Regards,
Suman

AnilB,
Assigning a task to a user that is not in the directory will likely result in the BPM flow going into suspended state. To avoid this, assign the task to a pre-created group, you should not get an error even if the group is empty. You can then add and remove the users to that group to control access to the task.
Phil

Automated error email notification when outbound IDOC fails

Hi,
The requirement is that whenever the outbound IDOC of message type PAYEXT, basic type PEXR2002, fails, then email has to be trigerred to a group id.
I had suggested to write a report program that runs as a job. If the IDOC goes to error status then mail will be sent from this report. Client prefers it to be done through workflow.
There is a standard process code for outbound IDOC failure handling EDIO (we40). standard task 7989 has been assigned to this process code. I dont want to modify this standard task as I am not sure of impact.
Terminating event for this task is 'ERRORPROCESSCOMPLETD'.
I have developed the workflow that has trigerring event 'ERRORPROCESSCOMPLETD' and bound with the IDOC number. This will send mail to the group id with the IDOC details
Now issue is that, I am not sure if standard process EDIO will be trigerred automatically, or should we configure anywhere. Since this is standard outbound IDOC, I am not able to add the process code in partner profile.
Please give your inputs or any other alternate solution to send mail through workflow when outbound IDOC fails.
Thanks in advance.

Hi,
I guess in your outbound partner profile for PAYEXT. you need to add process code EDIO in message control TAb. WHich will cause to trigger the workflow which will send the notification.

Workflow Notification Mails Are Not Being Sent

Hi
we are running 11.5.10.2 version , some times Workflow Notification Mails Are Not Being Sent , so how should i start diagnose this issue.
Regards

Dear Hussein
thanks for your reply, below are the log messages from the todays file FNDCPGSC6854.txt
[May 12, 2009 1:21:12 PM AST]:1242123672450:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPOutboundProces
sor.send(Message)]:Problem encountered when sending to {[[=?UTF-8?B?2LXZhNin2K0g2LXYp9mE2K0g2LnYrNmE2Kf
Zhg==?= <[email protected]>]]} -> javax.mail.MessagingException: 451 Timeout waiting for client input
[May 12, 2009 1:21:12 PM AST]:1242123672451:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPMessageHandler
.sendMessages(String)]:MessagingException -> javax.mail.MessagingException: 451 Timeout waiting for cli
ent input
[May 12, 2009 2:03:48 PM AST]:1242126228129:Thread[inboundThreadGroup1,5,inboundThreadGroup]:0:-1:DAREB
S:172.30.2.45:-1:-1:UNEXPECTED:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.IMAPInboundProc
essor.moveMessage(Message, String)]:Unable to move message {null} -> javax.mail.StoreClosedException: *
BYE Microsoft Exchange Server 2003 IMAP4rev1 server version 6.5.7638.1 closing connection due to timeo
ut.
[May 12, 2009 2:17:01 PM AST]:1242127021657:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPOutboundProces
sor.send(Message)]:Problem encountered when sending to {[[=?UTF-8?B?2YXYp9ix2KrZhiDZgdmG2YrYsg==?= <mvi
[email protected]>]]} -> javax.mail.MessagingException: 451 Timeout waiting for client input
[May 12, 2009 2:17:01 PM AST]:1242127021658:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPMessageHandler
.sendMessages(String)]:MessagingException -> javax.mail.MessagingException: 451 Timeout waiting for cli
ent input
[May 12, 2009 3:49:02 PM AST]:1242132542705:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPOutboundProces
sor.send(Message)]:Problem encountered when sending to {[[=?UTF-8?B?2KfYtNix2YEg2KfZhNiz2YrYryDYp9it2YX
YryDYtNio2YQ=?= <[email protected]>]]} -> javax.mail.MessagingException: 451 Timeout waiting for clie
nt input
[May 12, 2009 3:49:02 PM AST]:1242132542705:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPMessageHandler
.sendMessages(String)]:MessagingException -> javax.mail.MessagingException: 451 Timeout waiting for cli
ent input
[May 12, 2009 4:03:08 PM AST]:1242133388437:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:UNEXPECTED:[fnd.wf.mailer.URLMIMETagListener]:oracle.apps.fnd.wf.mailer.URLMIMETa
gListener.editStyleRef(HTMLTagEvent, String) Making a connection to {http://oracle.kannon.com:8000/OA_
HTML/cabo/images/cache/cmbts.gif)} returned {404 - Not Found}. Leaving as a reference

SUS - MM Scenario: notification mail not sent to all Supplier Users

Hi,
we're in a SUS-MM scenario and we publish Purchasing documents (PO and/or SAR) to SUS portal.
The notification mail for new published documents are sent only to the e-mail address of the Supplier (imported from SAP to SUS) which is in the SAP Supplier Master data. But if the Admin supplier creates other users for the supplier (F1 / F2 / F3), the notification mail for new published PO/SAR are not sent to the mail address of F1 / F2 / F3 users. Is it the standard behavior or is there some missing customizing setting missing?
Our customer wants that notification mail are sent to all the mail addresses of the Supplier Users.
Has someone had this kind of requirement? and, if it is not achievable via standard customizing, which could be the right solution to meet this requirement?
Thanks in advance

Hi,
This is a standard SAP process which SAP has provided,
The other way is to develop a custom program,
1) Select the Supplier.
2) Check the available contact persons of the Supplier.
3) When a document is created in ECC (Hope you are in MM-SUS), select the list of contact persons for Supplier. (I assume need a RFC FM to develop to SUS)
4) Send a e-mail to all users linked with this Supplier.
You can find the linked Contact persons in BP transaction and Table BUT000.
Please change the Status of the Issue once your problem solved, other will get benefitted. If possible post the soulution.
Thank you,
Anil

How to send e-mail notification automatically when a record is inserted?

Dear All,
Could anyone kindly tell me how to send e-mail notification automatically when a record is inserted through a form in Oracle Portal Release 2?
Regards,
Ridwan.

Hi,
If you are writing a form on a table then you can call the mail API from a database trigger on the table. If it is a form on a procedure, you can make the email call from the procedure. To know more about sending mails from plsql go to
http://www.quest-pipelines.com/newsletter-v2/smtp.htm
Thanks,
Sharmila

Getting job name to notification e-mail when monitoring runtime limits

Hello,
In CPS version M33.49-55614 the requirement is to notify users via e-mail when a certain job exceedes the defined maximum runtime limit.
We have defined the limit in "Runtime Limits" tab of Job definition and have defined an event to be raised in the same tab.
The event is used as an Wait event for a Job chain consisting of 1 step only with System_Mail_Send. The mail Subject text is using an expression '=waitEvents.<event_name>.raiserComment'.
After this we are receiving notification e-mails with Subject: Maximum Runtime Limit breached. Raising an event for job 1460806.
But the Job name is not passed through the '=waitEvents.<event_name>.raiserComment' expression.
We use the same scenario for notification e-mails for Error or Killed jobs, and in these cases the same expression '=waitEvents.<event_name>.raiserComment' results to notification e-mail subject: Event raised by Job:1460826 (JOBNAME) going to status Killed.
The question is how to get the JOBNAME also to e-mail notification for exceeded maximum runtime?
2 attempts did not help:
- Add the $ substitution variable to Event Raise comment
- use =waitEvents.<event_name>.raiserJobName in notification mail Subject
Thanks and Regards,
Ernest Liczki

Hi Biswarup,
From the official documentation http://help.sap.com/saphelp_nw04s/helpdata/en/e8/a9a76828b8dc469969ff450ec81ced/content.htm this definitely should work out of the box.
Anyhow, what kind of subscription do you have chosen, immediate subscription or regular (daily, weekly, ...)?! If you are talking about an immediate subscription, try to alter this to a regular subscription. <i>Maybe</i> the change event which triggeres immediate subscriptions isn't thrown correctly by the TBP.
But even in this case, please open an OSS message, as this should be considered as a bug (or at least as a lack of documentation on help.sap.com).
Hope it helps
Detlev

Emails get sent in Mail when pressing the space bar whilst spell checking

Why do emails get sent in Mail when pressing the space bar whilst spell checking ?? This is beyond annoying. It's been happening for ages on my MBP. I have seen others complain and I can't understadn why this simple bug has not been fixed. Any help on this would be very much appreciated. thank you.

Hi
In composing I have Check Spelling "when I click send" selected. I tried on my iMac, my Mail account is sync'd via iCloud etc.. I got the same thing, when you hit send and review your spelling, I need to do that a lot, as well as insert missing words. As soon as you hit the space bar off goes the email. I have seen others complain of this on the google. I have now switched to check as I type but when i make a typo Mail just puts a red line under the word, it doesn't open up the Spell Checker dialog.
Is there away of resetting my Mail Apps database ? MAybe something is corrupt.
thanks.

Sending an email notification when an IDOC get failed

Hi Experts,
Can anybody tell how i can send an email notification when my Idoc fails.
Regards,
Ratheesh

report zalv10.
type-pools: slis.
data: g_repid like sy-repid,
gs_print type slis_print_alv,
gt_list_top_of_page type slis_t_listheader,
gt_events type slis_t_event,
gt_sort type slis_t_sortinfo_alv,
gs_layout type slis_layout_alv,
gt_fieldcat type slis_t_fieldcat_alv,
fieldcat_ln like line of gt_fieldcat,
col_pos type i.
data: begin of itab,
field1(5) type c,
field2(5) type c,
field3(5) type p decimals 2,
end of itab.
data: begin of itab1 occurs 0.
include structure itab.
data: end of itab1.
data: begin of itab_fieldcat occurs 0.
include structure itab.
data: end of itab_fieldcat.
Print Parameters
parameters:
p_print as checkbox default ' ', "PRINT IMMEDIATE
p_nosinf as checkbox default 'X', "NO SELECTION INFO
p_nocove as checkbox default ' ', "NO COVER PAGE
p_nonewp as checkbox default ' ', "NO NEW PAGE
p_nolinf as checkbox default 'X', "NO PRINT LIST INFO
p_reserv type i. "NO OF FOOTER LINE
initialization.
g_repid = sy-repid.
perform print_build using gs_print. "Print PARAMETERS
start-of-selection.
TEST DATA
move 'TEST1' to itab1-field1.
move 'TEST1' to itab1-field2.
move '10.00' to itab1-field3.
append itab1.
move 'TEST2' to itab1-field1.
move 'TEST2' to itab1-field2.
move '20.00' to itab1-field3.
append itab1.
do 50 times.
append itab1.
enddo.
end-of-selection.
perform build.
perform eventtab_build changing gt_events.
perform comment_build changing gt_list_top_of_page.
perform call_alv.
form build.
DATA FIELD CATALOG
Explain Field Description to ALV
data: fieldcat_in type slis_fieldcat_alv.
clear fieldcat_in.
fieldcat_ln-fieldname = 'FIELD1'.
fieldcat_ln-tabname = 'ITAB1'.
*FIELDCAT_LN-NO_OUT = 'X'. "FIELD NOT DISPLAY, CHOOSE FROM LAYOUT
fieldcat_ln-key = ' '. "SUBTOTAL KEY
fieldcat_ln-no_out = ' '.
fieldcat_ln-seltext_l = 'HEAD1'.
append fieldcat_ln to gt_fieldcat.
clear fieldcat_in.
fieldcat_ln-fieldname = 'FIELD2'.
fieldcat_ln-tabname = 'ITAB1'.
fieldcat_ln-no_out = 'X'.
fieldcat_ln-seltext_l = 'HEAD2'.
append fieldcat_ln to gt_fieldcat.
clear fieldcat_in.
fieldcat_ln-fieldname = 'FIELD3'.
fieldcat_ln-tabname = 'ITAB1'.
fieldcat_ln-ref_fieldname = 'MENGE'. "<- REF FIELD IN THE DICTIONNARY
fieldcat_ln-ref_tabname = 'MSEG'. "<- REF TABLE IN THE DICTIONNARY
fieldcat_ln-no_out = ' '.
fieldcat_ln-do_sum = 'X'. "SUM UPON DISPLAY
append fieldcat_ln to gt_fieldcat.
DATA SORTING AND SUBTOTAL
data: gs_sort type slis_sortinfo_alv.
clear gs_sort.
gs_sort-fieldname = 'FIELD1'.
gs_sort-spos = 1.
gs_sort-up = 'X'.
gs_sort-subtot = 'X'. ***CRUCIAL STATEMENT****
append gs_sort to gt_sort.
clear gs_sort.
gs_sort-fieldname = 'FIELD2'.
gs_sort-spos = 2.
gs_sort-up = 'X'.
*GS_SORT-SUBTOT = 'X'. **THIS SHOULD NOT BE UNCOMENTED*
append gs_sort to gt_sort.
endform.
form call_alv.
ABAP List Viewer
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = g_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
i_structure_name = 'ITAB1'
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort[]
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = gt_events[]
IT_EVENT_EXIT =
is_print = gs_print
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = itab1
exceptions
program_error = 1
others = 2.
endform.
HEADER FORM
form eventtab_build changing lt_events type slis_t_event.
constants:
gc_formname_top_of_page type slis_formname value 'TOP_OF_PAGE'.
*GC_FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE'.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = lt_events.
read table lt_events with key name = slis_ev_top_of_page
into ls_event.
if sy-subrc = 0.
move gc_formname_top_of_page to ls_event-form.
append ls_event to lt_events.
endif.
define END_OF_PAGE event
READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_END_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO LT_EVENTS.
ENDIF.
endform.
form comment_build changing gt_top_of_page type slis_t_listheader.
data: gs_line type slis_listheader.
clear gs_line.
gs_line-typ = 'H'.
gs_line-info = 'HEADER 1'.
append gs_line to gt_top_of_page.
clear gs_line.
gs_line-typ = 'S'.
gs_line-key = 'STATUS 1'.
gs_line-info = 'INFO 1'.
append gs_line to gt_top_of_page.
gs_line-key = 'STATUS 2'.
gs_line-info = 'INFO 2'.
append gs_line to gt_top_of_page.
CLEAR GS_LINE.
GS_LINE-TYP = 'A'.
GS_LINE-INFO = 'ACTION'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
endform.
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = gt_list_top_of_page.
write: sy-datum, 'Page No', sy-pagno left-justified.
endform.
form end_of_page.
write at (sy-linsz) sy-pagno centered.
endform.
PRINT SETTINGS
form print_build using ls_print type slis_print_alv.
ls_print-print = p_print. "PRINT IMMEDIATE
ls_print-no_print_selinfos = p_nosinf. "NO SELECTION INFO
ls_print-no_coverpage = p_nocove. "NO COVER PAGE
ls_print-no_new_page = p_nonewp.
ls_print-no_print_listinfos = p_nolinf. "NO PRINT LIST INFO
ls_print-reserve_lines = p_reserv.
endform.deepakb
Posts: 3
Joined: Mon Nov 17, 2003 8:18 am
Location: Mumbai

How do i get mail notifications -sounds when using hotmail

Hey everyone, I know theres a way to do it but haven't figured it out yet. How do I get a sound notification when I get new mail - currently using hotmail on my ipad. Thanks

This is a general setting for all mail.
Settings > Notifications > Mail
Configure it the way you want..........

I cannot view the family sharing invitation. My wife has sent it multiple times Via email and text yet I haven't had a notification, but when I attempt to send to her she receives the notification. Help please?

I cannot view the family sharing invitation. My wife has sent it multiple times Via email and text yet I haven't had a notification, but when I attempt to send to her she receives the notification. Help please?

There are a lot of posts in the forums today with people having problems with iMessage. There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
I would just wait it out - I'm sure it will be sorted out soon.

Hi I have this problem that when I send a mail to someone mails that I have already sent out end up on this email sometimes two or even twenty different mails end up going to the person I'm send ding a mail too please help

Hi I have this problem that when I send a mail to someone mails that I have already sent out end up on this email sometimes two or even twenty different mails end up going to the person I'm send ding a mail too please help

I have been doing some test now and have found out that my mails are being merged according to subject eg, so if I use cleaning goods as a subject and send out a new mail all mails with this subject are sent to the one person

Notification(Mail) when an Idoc is sent or received

Similar Messages

Maybe you are looking for