Now T420 wont sleep due to srvnet????????

So last night my laptop wouldn't sleep when I shut the lid. I fixed that issue today, and now when I shut the lid or use Fn+F4 the sleep option works like a charm.
Now, I have another problem today. I found out that my computer is not going to sleep, stopping the hard disks or hibernating on it's own while it's idle. I can manually shut the lid or use the Fn+F4 but if I just leave it sitting on my desk, with or without AC power, it will not sleep or hibernate. Only thing that happens in the screen dims and shuts off as per my settings.
I ran some type of system scan with powercfg -energy and found this result:
System Availability Requestsystem Required Request
The device or driver has made a request to prevent the system from automatically entering sleep.
Driver Name \filesystem\srvnet
Does any one know what this is or how I can stop this so my computer will sleep on it's own? I'm running Windows 7 Pro if that helps.

hey andyems10,
launch Task Manager and see if there is any program/software called "srvnet", if there is; check the description and see which program owns it.
if you have the installer file for that program, try reinstalling and see how it goes from there.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Similar Messages

  • Powermac G5 wont sleep, and weird squares show up where mouse is

    I just reinstalled for the third time Tiger on my Dual 2gb G5 with a 30" Cinema, Was working great till I reinstalled to OS to make a new user account. Now it wont sleep, When I manually put it to sleep, the mouse dissapears, and nothing else happens. It also gets these 1/16" squares and weird anolmolys on the screen when the mouse sits, especially when I scroll wheel, It makes a line of squares. I have tried resetting the PMU, (opening the case and pushing the little button on the Mother board).
    I am at a loss, Can you reset the pram on the G5? or is it even nessesary?
    when it goes to the screen saver the screen just freezes, and then wakes up from the screen saver fine.

    Stumbled upon the answer, I didnt remember ever installing the drivers for the ATI Video card, but had a brain **** and installed them from the web, Solced the problem, Thanks. Your last line was inspired!

  • Just reinstalled itunes due to need to fix msvcr80.dll error; now itunes wont run because itunes library.itl cant be read created by newer version itunes.  how do i resolve this ?

    just reinstalled itunes due to need to fix msvcr80.dll error;
    now itunes wont run because itunes library.itl cant be read created by newer version itunes. 
    how do i resolve this ?

    By way of experiment, let's first try specifically choosing a library for iTunes to open.
    Quit iTunes if that error message is showing. Now hold down your Shift key, and then open iTunes. (Keep holding down the shift key while iTunes is opening.)
    You should see a dialog asking you if you want to choose or create a library, as per the following screenshot:
    Click "Choose Library ..."
    You should now see a screen like the following screenshot:
    Select the "iTunes Library.itl" file (shown circled in the screenshot) and click "Open".
    Does your iTunes library open without the error?

  • I just restored my Iphone 5 due to IOS7 screwing it up, now it wont activate becasue my server cant be reached and my itunes is not working. Help?

    I just restored my Iphone 5 due to IOS7 screwing it up, now it wont activate becasue my server cant be reached and my itunes is not working. Help?

    Endless countless millions of people are trying to authenticate AFTER downloading the new IOS.
    Download servers and Authentication / Activation servers are slammed right now.
    Give it some time.   
    download servers VS. authentication servers
    You can wait till later and Activate your Iphone (or Ipad also) without any worries

  • The new itunes update will not install properly and now itunes wont work at all

    k, so I tried installing the new update for itunes and now it wont work at all. it says that the mobile device isnt installed. i have uninstalled and reinstalled itunes 4 times now.

    My issue is it wont even reinstall onto my computer
    Yes I'm aware of that. The procedures are also for trying in cases where iTunes can't be reinstalled due to a "Could not start Apple Mobile Device service" message.
    If you're getting a different error message relating to the Apple Mobile Device Service (or Apple Mobile Device Support) when you try to reinstall iTunes, post back to let us know what that error message says. (Precise text, please.)

  • My IPhone4 keeps buzzing randomly and now it wont even charge

    My IPhone4 keeps buzzing randomly and now it wont even charge !! Please "HELP"
    Info:
    IPhone 4
    Version : 5.1
    I was having this problem with the vibration IPhone keeps vibrating randomly with no notification don't know what's the problem with it !!
    And currently when I tried to charge it it wont charge I tried to do some research about this issue and have read some of the same problem
    here in the forum with same issue and done almost everything changed the cable , core , usb did the hard reset still nothing !!!
    Any idea would be appreciated . Thanks
    Updated:
    I discovered that its not a battery issue
    The reason is that it's chargeable while the phone is switched off completely !
    after a while you can see the battery charge is full 100%
    but when it's switched on the phone wont charge or recognized
    the cable from wall charger or usb so I the ITunes won't sync or see the device !
    I think its something with the software ! 
    I tried to update to IOS 5.1.1  but after downloading
    it wont install the new update I got this message;
    "Unable to Install Update"
    An error occurred installing IOS 5.1.1
    So that only chance which I think it might hwlp solving the problem is dead now
    I really have no idea what to do other than taking this phone to Apple 
    :If you have similar issue you can write here or you can check the following post
    https://plus.google.com/u/0/109937970144676369628/posts/Hrv43wnzREE
    keywords:
    IPhone keeps buzzing , IPhone4 keeps buzzing
    IPhone4 keeps vibrating , IPhone wont charge
    An error occurred installing , Unable to Install Update , 
    IPhone wont connect to iTunes .

    UPDATE: 2
    My IPhone4 keeps buzzing randomly and now it wont even charge !! Please "HELP"
    https://plus.google.com/u/0/109937970144676369628/posts/CrAi9u9PZz7
    https://plus.google.com/u/0/109937970144676369628/posts/Hrv43wnzREE
    https://plus.google.com/u/0/109937970144676369628/posts/a2TeUdCHoQs
    OK folks I started my deep research about this issue ( MY problem )
    Don't know if some one out there is even got similar issue
    The battery is charging well while my phone is switched off so last night
    my Iphone runs out of charge completely 0% so I plugged the cable
    and switch it on after a while and all the sudden it shows that the battery
    is charging while its switched on !!
    If you want to do this you have to plug the charging cable first then turn off
    your Iphone and wait for a while then  turn it back on ( sipmle off ) no need
    for the (Hard) Reset or recovery mode / DFU mode .
    Just as a normal way to of switching off your Iphone by
    Holding down the sleep/wake button at the top right-hand corner of the iPhone for a few seconds. 
    This will bring up a screen asking you to run the slider across the screen to turn off the iPhone.
    Wait few seconds and repeat that with holding that same sleep/wake button at the top right-hand corner for like a Sec and it will turn on , Then you can
    see that your phone is charging while its on !
    If you unplug your charging cable this will ruin the whole plan and if you
    you plug it again it wont show anything and will not be able to charge
    while its on and you have to repeat that procedure.
    Now we are sure that out Dock and Charging Port and battery are working fine , So whats the problem here and why my PC wont detect my Iphone ??
    Well I assume its from a part called ( PMU IC ) Power Management Unit IC
    http://www.buyforapple.com/product_images/j/iphone4_power_management_un__72870.j pg
    Check this out :
    http://youtu.be/MJPKuLy7XQQ
    So I think my main problem is from that tiny part that makes all that
    problem I have now so I have to replace it first just to make sure before
    replacing any other parts so this is the start I hope this was the problem
    that caused all this !!!
    If you have any similar issue to mine I really appreciate any advice ,
    suggestions regarding this matter .
    Thanks for reading
    Have a great time

  • TS3212 hi my iphone was updated to IOS6 and now it wont play my music it just scroles through all the titles please help

    my iphone was updated with IOS6 and now it wont play any of my music it just svroles through every song and wont stop i turned it off using the twin keys start and turn off but still no help please can some one halp me this apple softwear is crap

    Hi alicia243,
    Thanks for visiting Apple Support Communities.
    If your iPhone wont power on, I recommend going through these steps first:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Best,
    Jeremy

  • I was texting and locked my phone and now it wont turn back on and i tried charching it and everything.. any other ideas?

    i was texting and locked my phone and now it wont turn back on and i tried charching it and everything.. any other ideas?

    Try reseting. You may lose everything on phone though
    To reset
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
    'Home Button' is the Black depression in the Iphone that you can press
    'Sleep/Wake Button' is the black raised area at the top of the Iphone

  • Error when updating, now computer wont recognise.

    I was updating my iPod touch today, itunes downloaded the update for the ipod and when it went to install it apparently had an error and now it wont do squat. It doesnt show up under "my computer" nor iTunes (using usb cable of course).. i have a newer Dell with Windows 7, current update of itunes as well... I've tried to reset the ipod but to no avail.... it turns on but shows a picture of a usb cable with an arrow pointing up towards the "itunes" icon.... ALSO, this is a little older touch, its the 32gb, pre camera version with the sleep button on the top left... H E L P!

    Try here:
    iOS: Device not recognized in iTunes for Windows
    Also try on another computer to help determine if you have an iPod or computer problem.

  • I was updating to ios7 and my phone turned off and now it wont turn back on. it shows the apple sign but it slowly fades away and so on. Help!

    i was updating to ios7 and my phone turned off and now it wont turn back on. it shows the apple sign but it slowly fades away and so on. Help!

    Hello there, RFJA2211.
    The following Knowledge Base article offers up some great troubleshooting steps for unexpected power off of your iOS device:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My iphone 3g was freezing so i started to reset it and now it wont even turn on. any suggestions?

    my iphone 3g was freezing on the text message screen so i tried to reset it by holding the top button and the home button. now it wont even turn back on. the apple logo comes on then turns off 10sec lter. any suggestions?

    When the iPhone only shows the Apple logo and then turns off, it usually indicates an issue with the software that is preventing the phone from completing it's boot sequence. This can be remedied by putting the phone into DFU mode and restoring it. By restoring the phone, the software and firmware will be removed and replaced with a fresh set and the content will be removed from the phone and need to be resynced.
    To put the phone into DFU mode:
    1. Make sure the phone is connected to the computer
    2. Hold down the sleep/wake button and home button at the same time for 8 seconds
    3. Let go of the sleep/wake button and keep holding down the home button
    4. If you are successful, a dialog box will pop up in iTunes stating that iTunes has detected an iPod/iPhone in recovery mode and the phone's display will remain black.
    5. Click OK, then click the restore button in iTunes.
    Hopefully after that, the iPhone will be up and running so you can sync your content back.
    I hope this helps!

  • HT1430 When i connected my Iphone to Itunes it started to update the software, and then said it's unable to update and to please restore it, now it wont "activate" and keeps saying "try again"

    When i connected my Iphone to Itunes it started to update the software, and then said it's unable to update and to please restore it, now it wont "activate" and keeps saying "try again"

    What iPhone do you have? You can check in settings>>general>> about.
    If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
    If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears.

  • My ipod touch shut off and now it wont turn back on, how do i fix that?

    my ipod touch shut off and now it wont turn back on, how do i fix that?

    Hey lattifahfromny,
    Thanks for the question. Based on the information you have provided, the following resource may assist you:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    1. Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thanks,
    Matt M.

  • Hi i did an update on my iPod touch i took it uot i played on it for a few minutes i then licked the screen and i wanted to unlick it but it just flashed and now it wont turn on

    i am terribly confused i did an update on my ipod touch i took it out of my usb port i played on it 4 a bit i locked the screen and i wanted to unlock it when it flashed and now it wont turn on !!

    - See if resetting the iod helps.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next, connect the iPod to its syncing computer and if iTunes sees the iPod restore the iPo via iTunes.
    - If iTynes does not see the iPod, place the iPOd in recovery mode and then try restoring the iPOd.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • Ive just bought an ipad, and uodated to ios7..... now it wont charge..... any ideas?

    Ive just bought an ipad 2, updated to IOS7, now it wont charge. Anyone have any suggestions?

    Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
    http://support.apple.com/kb/TS2802
    http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain
    http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
    Poor battery life after installing iOS 7.1? Try these simple tips
    http://www.zdnet.com/poor-battery-life-after-installing-ios-7-1-try-these-simple -tips-7000027348/
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

Maybe you are looking for

  • Cannot hear E90 navigation speech when using BT ca...

    I have E90 and using Nokia Maps app for navigation (30 days to start). Also have a Nokia car kit using Bluetooth connection. Noticed, that when car kit bluetooth link is active, I cannot hear the speech helper of Nokia Maps navigation at all. No soun

  • Force run apps don't deploy on some machines causing zen icons toflash at intervals

    I'm having a problem lately, with new apps that I'm creating (for example Acrobat Reader 9.4) not deploying on some machines. I have them set to force run, user associated. They appear in application explorer, and if I manually launch them, they will

  • Hyperion Installaion 11.1.1.3(error during configuration)

    Hi All I am Installing hyperion 11.1.1.3 on windows server2003 R2.I installed all the components individually Hyperion fondation first,essbase planning , FR then workspace and I created one schema after installing oracle 11g but when I try to configu

  • LabVIEW 2009 build memory usage exceeds Windows limit

    We have a large application that builds without problems using 8.6.1, but failed to build using LabVIEW 2009 with the error "Not enough memory to build this application". We solved the problem by adding the parameter /3GB to the Windows XP boot.ini f

  • When can I buy a FirefoxSmatphone device in Portugal?

    I'm from Portugal and I want to buy a FirefoxOS device. Unfortunately, there is no devices for sale in Portugal at the moment. When it will became possible to buy in Portugal? It will be in a near future or not? Or do I need to buy from another count