[nQSError: 43126]Authentication failed:invalid user/password, how to avoid?

Hi,
I encountered following error: [nQSError: 43126] Authentication failed: invalid user/password.
when I was starting weblogic server, and server used to shutdown.
After snooping around on net, came across this blog: http://obiee11gqna.blogspot.com/2011/09/obiee-11g-errors-nqserror-43113.html
Found that password for MDS & BIPLATFORM was 'expired', was able to solve my problem and my Presentation Services were up & running.
My question is, how to avoid password of MDS & BIPLATFORM from getting expired in future??
Regards,
Jitendra

Dpka,
Thanx for the link, it shows the way to avoid expiry of password.
I also found another link, in comment section which is equally useful: http://www.artofbi.com/index.php/2011/03/mds-or-biplatform-schema-password-change-considerations/
PS: Thanx to Deva as well for replying to my query.
Regards,
Jitendra

Similar Messages

Authentication failed: invalid user/password.

After uploading a new RPD in obiee( 11.1.1.5), my obiee has started failing with following error in nqserver.log. I have verified that BISystemUser password is the same in console and EM. I have also verified that I am entering correct RPD password while uploading it through EM. What else may be wrong ?
[2011-08-23T03:52:39.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 004emGWVmAQAtHd5Tf^Ayc0000K2000000] [tid: b38396d0] [36007] Loading repository /product/obiee_11.1.1.5/instances/instance1/bifoundation/OracleBIServerComponent/coreapplication_obis1/repository/iipreports_BI0038.rpd.
[2011-08-23T03:52:40.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 004emGWVmAQAtHd5Tf^Ayc0000K2000000] [tid: b0923b90] [14055] Loading subject area: AIP ...
[2011-08-23T03:52:40.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 004emGWVmAQAtHd5Tf^Ayc0000K2000000] [tid: b0923b90] [14056] Finished loading subject area: AIP.
[2011-08-23T03:52:40.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 004emGWVmAQAtHd5Tf^Ayc0000K2000000] [tid: b38396d0] [85003] MDX Member Name Cache subsystem started successfully.
[2011-08-23T03:52:40.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 004emGWVmAQAtHd5Tf^Ayc0000K2000000] [tid: b38396d0] [85004] MDX Member Name Cache subsystem recovered entries: 0, size: 0 bytes.
[2011-08-23T03:52:40.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 004emGWVmAQAtHd5Tf^Ayc0000K2000000] [tid: b38396d0] [13026] Error in getting roles from BI Security Service: 'Error Message From BI Security Service: [nQSError: 46164] HTTP Server returned 404 (Not Found) for URL .'
[2011-08-23T03:52:40.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 004emGWVmAQAtHd5Tf^Ayc0000K2000000] [tid: b38396d0] nqsserver:     Clustered Oracle BI Server started. Version: 11.1.1.5.0.110427.0846.000.
[2011-08-23T03:52:44.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 004emGWVmAQAtHd5Tf^Ayc0000K2000000] [tid: b0923b90] [43071] A connection with Cluster Controller xxx.us.oracle.com:9706 was established.
[2011-08-23T03:52:46.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 004emGWtbaWAtHd5Tf^Ayc0000K3000001] [tid: b00beb90] Error Message From BI Security Service: [nQSError: 46164] HTTP Server returned 404 (Not Found) for URL .
[2011-08-23T03:52:46.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 004emGWtbaWAtHd5Tf^Ayc0000K3000001] [tid: b00beb90] [nQSError: 43126] Authentication failed: invalid user/password.
If I run opmnctl status then BIServer is up but the presentation services is down.
Following error is observed in sawlog0.log
[2011-08-22T22:52:46.000-05:00] [OBIPS] [ERROR:10] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 43126] Authentication failed: invalid user/password. (08004)[[
File:odbcuserpoploaderimpl.cpp
Line:292
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2011-08-22T22:52:46.000-05:00] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services are shutting down.[[
File:sawserver.cpp
Line:712
Location:
     saw.sawserver
ecid:

Hi,
I have upgraded a existing OBIEE 10G file EBSAnalyticMaster.rpd to 11G using ua (upgrade assistant) and getting the same error while upgrading the catalog.
Presentation service is not starting. Do you have a solution yet.

OBIA 7.9.5 EBS Integration Not Logged On nQSError 43001 Authentication Fail

Hi,
I'm attempting to get Oracle Business Intelligence Applications 7.9.5 / OBIEE 10.1.3.3.2 integrated into the eBusiness Suite 11.5.10.2 per Metalink Note 552735.1. At the moment not an action link, just menu option to SA Administrator.
I've run into and worked around a number of problems with the Initialization block variables setup in OracleBIAnalyticsApps.rpd and now no longer get errors in the NQServer.log after disabling Initialization Blocks for Siebel/Peoplesoft and disabling 2 EBS specific Init blocks that were erroring; 'Inventory Organizations' and 'Ledgers' I'll fix those later.
However, now I get an error in the sawlog0.log file as follows:
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 371
Properties: ConnId-6,6;ThreadID-1145072560
Location:
saw.odbc.connection.open
saw.connectionPool.getConnection
saw.threadPool
saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. NQODBC [SQL_STATE: 08004|http://forums.oracle.com/forums/] [nQSError: 10018|http://forums.oracle.com/forums/] Access for the requested connection is refused.
[nQSError: 43001|http://forums.oracle.com/forums/] Authentication failed for in repository Star: invalid user/password. (08004)
Type: Error
Severity: 42
Time: Wed Dec 3 07:13:16 2008
File: project/webconnect/connection.cpp Line: 276
Properties: ThreadID-1145072560
Location:
saw.connectionPool.getConnection
saw.threadPool
saw.threads
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
Can anyone point me in the right direction here?
Thanks,
Gareth

The strange thing is both Gareth and I have configured OBIA/OBIEE on a Linux server and local authentication works fine. Once we enable external EBS authentication, we get the error listed above.
Does anyone who has done the OBIA EBS integration with OBIEE running on Linux have an example of the odbc.ini file. It appears that even though we have reconfigured OracleBIAnalyticsApps.rpd to use OCI everywhere, that there is still some hard coded ODBC references for external authentication.
We are configuring instanceconfig.xml as directed:
Integrating Oracle Business Intelligence Applications with Oracle E-Business Suite
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=552735.1
Configuring InstanceConfig.xml for External Authentication
1. Modify the instanceconfig.xml file for the Oracle BI Presentation Services as shown below:
<?xml version="1.0"?>
<WebConfig>
<ServerInstance>
<CatalogPath>c:\temp\default</CatalogPath>
<DSN>AnalyticsWeb</DSN>
<Auth>
<ExternalLogon enabled="true">
<ParamList>
<Param name="NQ_SESSION.ICX_SESSION_COOKIE"
source="cookie"
nameInSource="EBSAppsDatabaseSID"/>
<Param name="NQ_SESSION.ACF"
source="url"
nameInSource="ACF"/>
</ParamList>
</ExternalLogon>
</Auth>

</ServerInstance>
</WebConfig>
2. The nameInSource for the cookie should be the same as the Oracle E-Business Suite application database SID name. To verify the name of the cookie, using Firefox, check the name of the cookie created under the us.oracle.com domain (or the domain where your Oracle E-Business Suite Application server is running). Please note that the cookie name is case sensitive.

SSO + OBIEE + Impersonation :: Invalid user/password

I am running the following setup:
OBIEE
Oracle Business Intelligence Product Version 10.1.3.3.2 (Build 071217.1900)
Physical Presentation Catalog Path /apps/installs/OracleBIData/web/catalog/paint/root
Oracle BI Server Data Source AnalyticsWeb
Analytics WebApp
Turned off OC4J, and deployed Analytics.war file on its own Apache-Tomcat instance
The Tomcat instance listens on port 9090
Siteminder (SSO) / Proxy Tier
I am running an Apache Web Server instance protected by CA Siteminder's SSO policy
AWS is listening on port 80, and acting as a proxy to redirect requests for Analytics.
Example:
Tomcat Analytics: http://localhost:9090/analytics/
AWS: http://localhost:80/obiee/ ==> http://localhost:9090/analytics/
I am doing testing with the out of the box PAIN repository & set of dashboards. My goal is to:
1. Protect OBIEE behind SSO
2. Allow ANY SSO authenticated user to gain access to OBIEE Analytics
3. Remove OBIEE's own authentication / login screen
Effectively:
1. Browse to http://localhost/obiee/
2. Get redirected to SSO login landing page
3. Authenticate via SSO
4. Upon successful SSO authentication, get redirected to the default OBIEE dashboard
So far, so good. I followed the guide for SSO integration found here: http://download.oracle.com/docs/cd/E12096_01/books/AnyDeploy/AnyDeploySSO.html
I've added the necessary entries on my instanceconfig.xml ($ORACLEBIDATA_HOME/web/config/instanceconfig.xml) as follows
<Auth>
<SSO enabled="true">
<ParamList>
<Param name="IMPERSONATE" source="httpHeader" nameInSource="eid"/>
</ParamList>
</SSO>
</Auth>
<CredentialStore>
<CredentialStorage type="file" path="/apps/installs/OracleBIData/web/config/credentialstore.xml" passphrase="***********"/>
</CredentialStore>
I've created an Impersonator user and impersonation alias on my credentialstore.xml file using:
cryptotools credstore -add -infile $ORACLEBIDATA_HOME/web/config/credentialstore.xml
Credential Alias: impersonation
Username: Impersonator
Password: ***********
Do you want to encrypt the password? y/n (y):
Passphrase for encryption: ***********
Do you want to write the passphrase to the xml? y/n (n):
File "<OracleBIData>/web/config/credentialstore.xml" exists. Do you want tooverwrite it? y/n (y):
I've also added the Impersonator user to the repository using BI Administrator. I opened the respository online and added Impersonator as a user, with the same password I defined when I user cryptotools. I included the Impersonator user on the same groups as the default Administrator (Administrators & XMLP_ADMIN) and subsequently checked my changes back into the server. After everything was done, I bounced presentation and BI servers through:
$run-sa.sh stop
$run-saw.sh stop
$run-sa.sh start
$run-saw.sh start
Presentation services starts up fine, BI server starts up fine as well. When I browse to the Apache Web Server site, I get redirected to SSO, I pass my credentials, and the wind up on the /saw.dll?Dashboard URI but I get the following message:
You are not currently logged in to the Oracle BI Server.
If you have already logged in, your connection might have timed out, or a communications or server error may have occurred.
Here are the relevant log entries from $ORACLEBIDATA_HOME/web/log
sawlog0.log -I replaced the actual username with <SSOUID>. <SSOUID> is the actual SSO header I need.
Oracle BI Presentation Services have started successfully.
Type: Error
Severity: 40
Time: Fri Jul 23 12:02:57 2010
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 371
Properties: ConnId-1,1;ThreadID-4096981904
Location:
saw.odbc.connection.open
saw.connectionPool.getConnection
saw.threadPool
saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43001] Authentication failed for <SSOUID> in repository Star: invalid user/password. (08004)
Type: Error
Severity: 42
Time: Fri Jul 23 12:02:57 2010
File: project/webconnect/connection.cpp Line: 276
Properties: ThreadID-4096981904
Location:
saw.connectionPool.getConnection
saw.threadPool
saw.threads
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
I am at a total loss with this. If I am understanding the OBIEE stack correctly, this would seem to indicate:
a. The impersonation credentials on the credentialstore.xml file are not being decrypted correctly, or the password actually doesn't match. But I've triple checked this.
b. The impersonation alias is not being recognized by presentation services.
I would really appreciate any input here. If I've left out any relevant items, please ask questions and I'll try to be as thorough as possible.
Thanks in advance!
Miguel.-
Edited by: user11343977 on Jul 23, 2010 11:49 AM

Changes made. Here are the log entries:
sawlog0.log
Type: Error
Severity: 40
Time: Mon Jul 26 12:27:59 2010
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 371
Properties: ConnId-13,13;ThreadID-4091849616
Location:
saw.odbc.connection.open
saw.connectionPool.getConnection
saw.threadPool
saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43001] Authentication failed for 7880429329 in repository Star: invalid user/password. (08004)
Type: Error
Severity: 42
Time: Mon Jul 26 12:27:59 2010
File: project/webconnect/connection.cpp Line: 276
Properties: ThreadID-4091849616
Location:
saw.connectionPool.getConnection
saw.threadPool
saw.threads
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
And here is the relevant entry from the NQQuery.log -which is enlightening if I should say:
--------- Oracle BI Version: 10.1.3.3.2.071217.1900 : New Session Timestamp: 2010/07/26 12:34:33
+++Impersonator:fffe0000:fffe0004:----2010/07/26 12:34:59
-------------------- An initialization block named 'Authorization', on behalf of a Session Variable, issued the following SQL query:
SELECT ':USERID','Administrators','GuestAccount' from dual
Returned 0 rows. Query status: Failure

Authentication Fault: Invalid User Session Token

Hi,
I am trying to protect a call to third party webservices using OWSM and OAM. I followed the steps mentioned in Oracle Web Services Manager
Deployment Guide to integrate OAM in OWSM, but not able to make any break through. I am getting following error if I test my web service using OWSM's inbuilt test tool:
<SOAP-ENV:Envelope
xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Body>
<SOAP-ENV:Fault>
<faultcode
xmlns:p="http://schemas.oblix.com/ws/2003/08/Faults">p:Client.AuthorizationFault</faultcode>
<faultstring>Authentication Fault: Invalid User Session Token</faultstring>
null</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
In gateway.log file, I get following oneliner message:
security.SimpleXMLCredsExtractor - SimpleXMLCredsExtractor failed to Extract creds.
I am using standalone OWSM installation.
Installed OAM SDK on the same machine of OWSM.
Added OAM SDK libraries into OWSM's path.
Please advise as I have already wasted 3-4 weeks into it.
.. Paresh
Edited by: user10301925 on Sep 29, 2009 2:24 AM
Edited by: user10301925 on Sep 29, 2009 2:24 AM

Hi,
Yes, I have registered the service in OWSM and calling that service through OWSM testing tool only...
Following is the request message:
<?xml version="1.0" encoding="UTF-8" ?>
- <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
- <soap:Header>
- <wsse:Security env:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
- <wsse:UsernameToken xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:Username>owsmuser</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">welcome11</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soap:Header>
- <soap:Body xmlns:ns1="http://service/">
<ns1:getDateTime />
</soap:Body>
</soap:Envelope>
Please advise.
.. Paresh

"Authentication failed. User is already authenticated as a different user."

Hello,
Initially I was not able to log into the Visual Admin. When I logged into the Visual Admin, I got authenication failed. I reset the password of Administrator in the User Administration on the portal. Now I can log into the Visual Admin using the password I just changed on the portal .
I am not able to logon to the portal using "Administrator". I get this message: "Authentication failed. User is already authenticated as a different user."
The URL is somewhat different as this is a production portal: "http://host.com/sld" (/irj/portal)
Does any one have a clue.
Thanks
Srinivas

There were no relevant roles assigned.

NoMachine(freenx) Authentication failed for user (MYUSERNAME)

Hi all,
I have quite a few experience with freenx on other linux distributions, but this is my first time setting up freenx on archlinux. After following the instructions in the wiki, authentication keeps failing no matter what I do.
Stuff I've done from the wiki:
1. install freenx
2. add RSAAuthentication yes AllowUsers someuser nx to sshd_config
3. add md5sum to node.conf
4. pacman -S xdialog xterm
5. run "/usr/bin/nxsetup --install --setup-nomachine-key"
6. modify /etc/nxserver/node.conf so that "USER_X_STARTUP_SCRIPT=.xinitrc"
7. pick the right configurations when connecting to my server
I have "exec startxfce4" in .xinitrc.
It always goes up to "Waiting for authentication" and then "Authentication failed for user (MYUSERNAME)" pops up. I think it should not be a XFCE issue since authentication itself didn't even pass. I assume if it is a X window problem, what I would get is something like a blank screen.
I'm using public key, so I didn't really copy anything from the server to my client.
I couldn't think of a second reason why this wouldn't work. Is there any thing obvious that I missed? (If so, please move this thread to the newbie corner. lol)
Any thoughts would be highly appreciated.
Thanks
Aweather

Hi,
I did update the password in the properties file but still I get the error
BUILD FAILED
C:\product\10.1.3.1\OracleAS_1\bpel\samples\utils\CreditRatingService\build.xml:
79: Authentication failed for user "oc4jadmin" on host
I am able to deploy from JDEV. and could configure as per documentation
Thanks in advance,
Anand
I had to update the <OH>/bpel/utilities/ant-orabpel.properties file for the password and now I can deploy successfully...information was there in the readme file...
Anand
Message was edited by:
AnandP

Essbase Error 1051440 - Authentication fails for user admin

We are facing a very unique problem...
The application is up & running.. even I can login into the application, can perform member addition, editing & mamage database from planning.... but I get this error while retreiving from excel addin or running scripts.
What I analysed is that this problem is Actually coming when a particular set of members are called anywhere either in scripts or during retreival thru Addin.
Recently we had added one dimension in one of the database of our application. After that that this problem started.
There were fewer Xref functions used to pull data from other cubes.... The problem is cominng with only those set of members where this Xref function has been used.
Even I had changed the formulas & incorporated member of new dimension in the formulas to point to target members....
Can you guys ever had faced such kind of issue....
Please help in resolving....
Complete Error is: msg fromremote site[date n time] Local////Error(1051440) Essbase user[admin] Authentication fails against shared services serverwith Error[30:1005:Authentication failed for user admin. Enter valid credentials.]]

Hi,
are you sure that user "admin" has all necessary rights to run your scripts? I have to ask because we sometimes had problems with our admin user... There is an "native essbase server admin" and the admin user in shared services.
We dont had any idea how this could happen but sometimes our admin user changed to the mentioned "native essbase server admin" - you can see it if you are connected as "admin (internal)".
If you are logged in as "admin (internal)" you have to "externalize" this user.
Hope this helps and my bad english is not so much confusing... :-)
Kind regards
André

Cisco ISE (Authentication failed: 24415 User authentication against Active Directory failed since user's account is locked out)

Hi,
I have a setup ISE 1.1.1. Users are getting authenticate against AD. Everything is working fine except some users report disconnection. I see in the ISE that (Authentication failed: 24415 User authentication against Active Directory failed since user's account is locked out). Users are using Windows 7 OS.
Error is enclosed & here is the port configuration.
Port Configuration.
interface GigabitEthernet0/2
switchport access vlan 120
switchport mode access
switchport voice vlan 121
authentication event fail action next-method
authentication event server dead action reinitialize vlan 120
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication order mab dot1x
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
mab
dot1x pae authenticator
dot1x timeout tx-period 60
spanning-tree portfast
ip dhcp snooping limit rate 30 interface GigabitEthernet0/2
switchport access vlan 120
switchport mode access
switchport voice vlan 121
authentication event fail action next-method
authentication event server dead action reinitialize vlan 120
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication order mab dot1x
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
mab
dot1x pae authenticator
dot1x timeout tx-period 60
spanning-tree portfast
ip dhcp snooping limit rate 30
Please help.

The error message means that Active Directory server Reject the authentication attempt
as for some reasons the user account got locked.I guess, You should ask your AD Team to check in the AD
Event Logs why did the user account got locked.
Under Even Viewers, You can find it out
Regards
Minakshi (Do rate the helpful posts)

41439 Login Error / Invalidation User password

Portal Login Error 41439:
I have Infrastructure and App Server (BI installation) on the same Win2K server. While trying to Login to Oracle10gAS Portal, I get following error.
WWV-41439 - You cannot login because there is no configuration information stored in the enabler configuration table.
Cause:
The default domain is not set in the Apache configuration. When this occurs, only the hostname is shown in the login link and the domain is not included.
Action:
Include the domain in the ServerName paramenter.
Where should this ServerName be modified? (Which file? in which OracleHome?)
Invalidation User Password:
On a different note, what should be the password of 'Invalidator' in 'Web Cache Settingst'? (I tried invalidator). For any change in config, currently it gives ORA-00017 error.
"Error in getting the Portal version INSTALL_ERROR : Could not obtain Portal version : ORA-01017: invalid username/password; logon denied"
Any suggestion will be appreciated.
Thanks,
Jay

Regarding Invalidator password, it might be worth trying you OEM middle tier password (for ias_admin)

700p suddenly gives invalid user/password message when trying to get new mail

My Yahoo Mail Plus account is working fine. When I use versamail on the Palm Treo 700p to retrieve emails from my active Yahoo account, I get "-ERR(Auth)invalid user/password" message. I can access my Yahoo Mail account from the "Web" app on my treo.
So it is definitely a VersaMail issue. This happened after it had been getting new mail (and sending) successfully.
Can anyone help?
Post relates to: Treo 700p (Verizon)

unfortunately Yahoo and their Branded contracts just don't work as advertised and neither the ISPs Nor Yahoo appear in the slightest bit interested.
If you delete the popstate.dat file in the profile folder in the yahoo server directory, it will restart the download again from the top (Everything)
You might also find that disabling email scanning in your anti virus program may be beneficial. (Could it be McAfee?)
The majority of RETR complaints here are from ATT and BT users, both of whom get McAfee given in by their ISP.

HT4811 i forgotten my user password how to retrieve new PW?

i forgotten my user password how to retrieve new PW?

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.

OBIEE 11.1.1.7 external database authentication fails with hashed passwords.

Hi .
I use an external database ( Oracle database 11g release 11.2.0.1.0) to authenticate user with OBIEE 11.1.1.7.
I configured SQL Authentication provider as my provider ,It works OK with :enabled Plaintext Passwords Enabled option and password is stored as plain text.
But It fails when I disable this option and want to authenticate with hashed passwords.It gives Authenticate Denied error.
In Provider Specific tab there are some parameters which might need changes:
1-Password Algorithm:??
2-Password Style:??
3-SQL Get Users Password:SELECT U_PASSWORD FROM USERS WHERE U_NAME = ?
How can I find correct values for options 1 and 2 form my external database?
And Is it need to rewrite query in option 3 ?
Please find attach files.

Hi,
I too faced same issue when I was installing OBIEE 11.1.1.7.0 on windows7 64bit.
Please refer the below links.
http://satyaobieesolutions.blogspot.in/2013/05/configuration-action-creating-domain.html
http://satyaobieesolutions.blogspot.in/2013/05/obiee-111170-simplesoftware-installation.html
http://satyaobieesolutions.blogspot.in/2012/06/obiee-11.html
Hope this help's
Thanks,
Satya

Signing up for fon Fails (invalid user name or pas...

Hello, We've been trying to sign up for fon and it keeps giving us the same error message! Invalid user name or password. The user name is the one on our contract also our email address. [email protected] this is working ok for emails etc. The password is likely the problem!! We've tried the original password provided on the contract (a bunch of letters and numbers) We've have changed our password to something specific to us! This does not work! Whilst having problems with email online support suggested we change our password again, so we did change password about a month ago! This also fails to work? So our email address and current working password for email access does not work! Can anyone tell s which password we should use or how we can get to sign up for fon! Chris

Crizdee wrote:
Hi, Thanks for the replies. The password provided when we signed I have tried many times and nada! I've read the FAQs and they say you can change your password so think this is the confusion? The fact we have changed passwords a few times! I'll see what support comes up with. Chris
If you cannot opt in using the FON page, then there must be an issue somewhere.
You have to use your full [email protected], which I expect that you are doing.
You will have to try the BT Openzone/FON helpdesk, and see if they can see what the issue is.
This is the signup page
https://www.bt.com/wifi/secure/optin.do
Just to confirm, this is the page you should be using to login.
https://www.bt.com/wifi/secure/status.do?s_cid=con_FURL_btfon/status
All new users are opted in by default, so you may find that that is the case for you, and the reason it is failing.
Have you tried the normal login page ?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Capturing the Message on the Login Page (Invalid user/password expired etc.

Hi, I have a requirment for capturing the error message on the Login page if the User's Account is expired or Account is Disabled or Invalid credentials, Password Lockout etc.
I am using the attached login page. Can any one please help me out on this.
<html><head><title>AARPLogin Page</title>
<script type="text/javascript" language="JavaScript" xml:space="preserve">
// This function automatically gets called for broswer detection
var isNav4 = false;
var isIE4 = false;
var isNS6 = false;
function obDetectBrowser()
if ( navigator.appVersion.charAt( 0 ) == "4" )
if ( navigator.appName == "Netscape" )
isNav4 = true;
} else {
isIE4 = true;
else
if ( navigator.appVersion.charAt( 0 ) >= 5 )
if ( navigator.appName == "Netscape" )
isNS6 = true;
obDetectBrowser ();
var HOSTNAME =
var COOKIE_OBREQUESTEDURL = "OBREQUESTEDURL";
var COOKIE_OBFORMLOGINCOOKIE = "ObFormLoginCookie";
var NCID_LANDING_PAGE_URL = "/landing/";
var QS_REDIR = "ReDir";
var keyChooser;
function checkPasswordEnterKey( event )
var form = document.forms[0];
if (isNav4 || isNS6) {
keyChooser = event.which ;
} else if (isIE4) {
keyChooser = window.event.keyCode;
if (keyChooser == 13) {
if (
form.userid.value
&& form.userid.value != ""
&& form.password
&& form.password.value != ""
form.submit();
return true;
else
alert('Please enter a UserId and Password');
return false;
function showHidePanel( panelID, displayValue )
var panelElement = document.getElementById( panelID );
if ( displayValue == 'show' )
panelElement.style.display = 'block';
else
panelElement.style.display = 'none';
function getQueryVariable( variable )
var query = window.location.search.substring( 1 );
var vars = query.split( "&" );
for ( var i=0; i < vars.length; i++)
var pair = vars[ i ].split( "=" );
if ( pair[ 0 ] == variable )
return unescape( pair[ 1 ] );
return "";
function Get_Cookie( name )
var nameEQ = name + "=";
var ca = document.cookie.split( ';' );
for( var i=0; i < ca.length; i++ )
var c = ca[ i ];
while ( c.charAt( 0 )==' ' )
c = c.substring( 1, c.length );
if ( c.indexOf( nameEQ ) == 0 )
return c.substring( nameEQ.length, c.length );
return null;
function Set_Cookie( name, value, expires, path, domain, secure)
document.cookie = name + "=" + escape( value ) +
( ( expires ) ? ";expires=" + expires.toGMTString() : "" ) +
( ( path ) ? ";path=" + path : "" ) +
( ( domain ) ? ";domain=" + domain : "" ) +
( ( secure ) ? ";secure" : "" );
function Delete_Cookie( name, path, domain )
if ( Get_Cookie( name ) )
document.cookie = name + "=" +
( (path) ? ";path=" + path : "" ) +
( (domain) ? ";domain=" + domain : "" ) +
";expires=Thu, 01-Jan-1970 00:00:01 GMT";
function lostPassword()
var CurrentLogin = document.forms[0].userid.value;
if ( CurrentLogin == "" ) {
alert ( "Please enter your eMail Address." );
document.forms[0].userid.focus();
else {
Set_Cookie( COOKIE_OBFORMLOGINCOOKIE, "done", 0, "/" );
var LOST_PWD_PAGE = "/identity/oblix/apps/lost_pwd_mgmt/bin/lost_pwd_mgmt.cgi?program=passwordChallengeResponse&login="+CurrentLogin+"&backUrl=http://oradev2.na.aarp.int/login/login.html&target=top";
window.location = LOST_PWD_PAGE;
function emailPassword()
document.passform.submit();
function onLoad()
if (getQueryVariable( "MSG" ) == 'LOGIN_FAILED' )
alert ("Login Failed, Please try again");
else if (getQueryVariable( "MSG" ) == 'PWD_EXP' )
alert ("Your Password Is About to Expire. Please Change it at your earliest convenience.");
var pwdExpUID = getQueryVariable( "login" );
var hostTarget = getQueryVariable( "hostTarget" );
var resURL = getQueryVariable( "resURL" );
var PWD_EXP_PAGE = "/identity/oblix/apps/lost_pwd_mgmt/bin/lost_pwd_mgmt.cgi?program=redirectforchangepwd&login="+pwdExpUID+"&backURL="+hostTarget+resURL+"&target=top";
window.location = PWD_EXP_PAGE;
else if (getQueryVariable( "MSG" ) == 'CHGPWD' )
alert ("You are required to change your password.");
var chgPwdUID = getQueryVariable( "login" );
var hostTarget = getQueryVariable( "hostTarget" );
var resURL = getQueryVariable( "resURL" );
var CHG_PWD_PAGE = "http://"+HOSTNAME+"/identity/oblix/apps/lost_pwd_mgmt/bin/lost_pwd_mgmt.cgi?program=redirectforchangepwd&login="+chgPwdUID+"&backURL="+hostTarget+resURL+"&target=top";
window.location = CHG_PWD_PAGE;
</script></head><body onload="onLoad();document.login.userid.focus();" alink="blue" bgcolor="#ffffff" link="blue" vlink="blue">
<p align="center">
<img alt="AARP Header Logo" src="login_files/aarpLogo.gif" border="0" height="91" width="219">
<br>
</p><form name="login" method="post" action="/access/oblix/apps/webgate/bin/webgate.so">
<div class="boldText" align="center">
<h2>Login</h2>
<div class="boldText" align="left">
<div id="LoginFailed" style="display: none;">
<table align="center" bgcolor="#ff0000" border="0" cellpadding="2" cellspacing="0" width="500">
<tbody><tr>
<td>
<table bgcolor="#e5e5e5" border="0" cellpadding="5" cellspacing="0" width="100%">
<tbody><tr bgcolor="#ffffff">
<td rowspan="3" height="40" nowrap="nowrap" valign="top">
<img src="login_files/error.gif" name="error" height="20" width="20">
</td>
<td rowspan="3" align="center">
<p>
<font color="#ff0000" size="-1">
<b>
<div id="TryAgain" style="display: none;">Login Failed! Invalid UserID and/or Password, Please try again.<br></div>
<div id="AccountLocked" style="display: none;">Your Account has been Locked!</div>
</b>
</font>
</p>
<p>
<font color="#ff0000">
<b>For
assistance call E-Services Help Line at (XXX) XXX-XXXX Monday through
Friday between the hours of 8:00 am and 5:00 pm eastern standard time.</b>
</font>
</p>
</td>
</tr>
<tr bgcolor="#ffffff">
</tr><tr bgcolor="#e5e5e5">
</tr></tbody></table>
</td>
</tr>
</tbody></table>
</div>
<br>
</div>
<table border="0" cellpadding="0" cellspacing="0" width="500">
<tbody><tr>
<td background="login_files/border_upper_left.gif" height="20" nowrap="nowrap" width="20"> </td>
<td background="login_files/border_top.gif" height="20" nowrap="nowrap"> </td>
<td background="login_files/border_upper_right.gif" height="20" nowrap="nowrap" width="20"> </td>
</tr>
<tr>
<td background="login_files/border_left.gif" nowrap="nowrap" width="20"> </td>
<td>
<table bgcolor="#ebebce" border="0" cellpadding="2" cellspacing="0" height="100%" width="100%">
<tbody><tr>
<td colspan="3" align="center">
<font color="darkred" face="Arial" size="3">
<b>
</b></font>
<b> </b></td>
</tr>
<tr valign="bottom">
<td colspan="3" width="100%">
<table bgcolor="#ebebce" border="0" cellpadding="5" cellspacing="0" width="100%">
<tbody><tr bgcolor="#e5e5e5">
<td rowspan="2" bgcolor="#ebebce" height="20" nowrap="nowrap" valign="top" width="4%">
<font color="#000000">
<span class="text">
<img src="login_files/arrow.gif" align="top" height="20" width="20">
</span>
</font>
<font color="#000000"> </font>
</td>
<td rowspan="2" bgcolor="#ebebce" width="96%">
<font color="#000000" size="-1">
<span class="text">Please enter your Email and Password. If you are a new user to AARP, please select First Time AARP User.
</span>
</font>
</td>
</tr>
<tr bgcolor="#e5e5e5">
</tr></tbody></table>
</td>
</tr>
<tr valign="bottom">
<td colspan="3">
<table align="center" border="0" width="349">
<tbody><tr>
<td nowrap="nowrap" width="74">
<font color="#000000" size="-1">
<div align="left">eMail:</div>
</font>
</td>
<td width="265">
<input name="userid" value="" size="32" maxlength="32" tabindex="2" type="text">
</td>
</tr>
<tr>
<td>
<font color="#000000" size="-1">
<div align="left">Password:</div>
</font>
</td>
<td>
<p>
<font color="#000000" size="-1">
<input name="password" size="32" maxlength="32" length="30" tabindex="3" type="password">
</font>
</p>
</td>
</tr>
</tbody></table>
</td>
</tr>
<tr>
<td>
<font color="#000000" size="-1">
<p align="center"><b>Forgot Your Password?</b></p>
</font>
</td></tr>
<tr>
<td align="center"> <font color="#000000" size="-1">
Email New Password
</font>
</td></tr>
<tr>
<td colspan="4">
<div class="boldText" align="center">
<br>
<input src="login_files/button_login.gif" name="Submit" value="" alt="login" type="image">
 <b class="boldText"><img src="login_files/button_clear.gif" name="img_clear" alt="clear" border="0" height="25" width="68"></b>
<b class="boldText"><img src="login_files/button_help.gif" name="img_help" alt="help" border="0" height="25" width="68"></b>
<b class="boldText"><img src="login_files/button_cancel.gif" name="img_cancel" alt="cancel" border="0" height="25" width="68"></b>
</div>
</td>
</tr>
</tbody></table>
</td>
<td background="login_files/border_right.gif" nowrap="nowrap" width="20"> </td>
</tr>
<tr>
<td background="login_files/border_lower_left.gif" height="20" nowrap="nowrap" width="20"> </td>
<td background="login_files/border_bottom.gif" height="20" nowrap="nowrap"> </td>
<td background="login_files/border_lower_right.gif" height="20" nowrap="nowrap" width="20"> </td>
</tr>
</tbody></table>
<p></p>
<span class="text"><br><br><b>NOTICE:
This system is the property of AARP and is for authorized use only.
Unauthorized access is a violation of federal and state law. All
software, data transactions, and electronic communications are subject
to monitoring.</b></span>
<div id="hr" style="position: absolute; width: 100%; height: 10px; z-index: 90; top: 657px; left: 10px;">
<hr>
</div>
<div id="footer" style="position: absolute; width: 700px; height: 55px; z-index: 115; top: 678px; left: 50px;">
<span class="subhead">
Privacy Policy
Disclaimer
Contact Us
</span>
<span class="bodytext">
</span></div>
<form name="passform" action="http://oradev2.na.aarp.int/wampassword/passwordReset.html" method="post">
<input name="login" value="" type="hidden">
<input name="backUrl" value="http://oradev2.na.aarp.int/login/login.html" type="hidden">
</form>
<script type="text/javascript" language="JavaScript" xml:space="preserve">
var undefined;
if (
document.login
&& document.login.password
function clearForm()
document.login.reset();
function navigate( linkName )
if ( 'login' == linkName )
if ( document.accountLogin.userID.value != '' && document.login.password.value != '' )
alert('Please click the Account Registration Setup link for now');
//document.location = 'userDataPersonal.htm';
else
alert('Please enter a UserId and Password');
function openHelp()
helpDoc = window.open( "http://www.aarp.org", "", "scrollbars=yes,resizable=yes,width=500,height=300" );
function cancel()
// open dialog
var initX = parseInt( window.screenX ) + parseInt( window.outerWidth ) / 2 - 100;
var initY = parseInt( window.screenY ) + parseInt( window.outerHeight ) / 2 - 50;
cancelDialog = window.open( "./cancelDialog.html", " cancelDialog", "resizable=yes,toolbar=no,menubar=no,width=200,height=150,screenX=" + initX +",screenY=" + initY );
</script>
</div></form></body>
<script type="text/javascript">
</script></html>

Is it not possible that someone fired the password expiration cmd ?
SQL> select limit
2 from   dba_profiles
3 where profile='DEFAULT'
4 and resource_name='PASSWORD_LIFE_TIME';
LIMIT
UNLIMITED
SQL> select profile from dba_users where username='MYUSER';
PROFILE
DEFAULT
SQL> conn myuser/myuser
Connected.
SQL> conn / as sysdba
Connected.
SQL> alter user myuser password expire;
User altered.
SQL> conn myuser/myuser
ERROR:
ORA-28001: the password has expired
Changing password for myuser
New password:
Password unchanged
Warning: You are no longer connected to ORACLE.
SQL> conn / as sysdba
Connected.
SQL> select name, astatus, TO_CHAR(ctime,'DD-MM-YYYY HH:MI') CTIME, TO_CHAR(ptime,'DD-MM-YYYY HH:MI') PTIME, TO_CHAR(EXPTIME,'DD-MM-YYYY HH:MI') EXPIRE
2 from sys.user$ where name ='MYUSER';
NAME
   ASTATUS CTIME
PTIME
EXPIRE
MYUSER
         1 23-11-2011 11:15
23-11-2011 11:15
23-11-2011 11:17
SQL>Nicolas.

[nQSError: 43126]Authentication failed:invalid user/password, how to avoid?

Similar Messages

Maybe you are looking for