Number/Keypad comes up when trying to view picture messages

I'm new to using iPhones, I just got mine today, and I went all out and got the iPhone 5s. Sadly I am already having this problem. When I send, or someone sends me a picture, and I try to view it in full the keypad/number pad always comes up which obstructs me from viewing the lower half of the photo. It is really rather annoying, and if anyone else has had this problem and knows how to fix it, would be greatly appreciated! I just wanna see my pictures!!! Please.

If you tap on the picture in the text message, it will open in a new window, so you can view the entire picture.

Similar Messages

  • Network authentication failed error message when trying to send picture messages

    I have a family member who is trying to send picture messages from Dubois, WY.  Verizon's map shows that Dubois is in the extended enhanced services area.  I am guessing that this may be one of those instances where the coverage map is not 100% accurate.  Please let me know if you have any other ideas or suggestions as to what the problem might be or how to resolve it.

    Customers have the ability to take pictures / videos anywhere. However, messages can only be sent, received, or uploaded, while in the Verizon Wireless National Enhanced Services Rate and Extended Network Coverage Area.
    Try dialing *228 send and option 2 to update the PRL on the phone.  Updating the PRL or Preferred Roaming List, ensures the phone is getting the best service possible.  
    You can also check the coverage area at the link below:
    http://www.verizonwireless.com/b2c/CoverageLocatorController?market=all

  • Email is lagging when trying to view new message

    Hi, I am an AT&T product pro for the Iphone 3G but I am not a total supper genius. I have a customer coming in that is having some problems with his yahoo mail on the Iphone. He just got the phone about 3 days ago. From what he has explained to me is as follows:
    The email messages will come in fine and he can send messages. But when he goes to view the new message the phone lags and shows that it is loading the message but it never gets any farther than this. My question is... could this be due to the edge network? Or is there some type of trouble shooting or poor connection on yahoo's end? As far as I know his internet on the edge network is working just fine. If any one has an answer for me please respond asap.
    Thanks,
    Dani

    I was able to find the solution it was simply due to the number of service bars the customer had in his home that was making it lag.

  • Album app crashes when trying to view pictures on Xperia Ion runing 4.0.4

    I have been using Firefox 20.0.1 on my Sony Xperia Ion and I have noticed that when I download a picture using firefox, it crashes my album app. I have tried this on chrome and the stock browser and it doesn't cause my app to crash, however, firefox is very speedy on my phone compared to the others and i would like to keep it that way.
    I have also noticed that after said pictures have been downloaded, if I try to set them as a wallpaper either for Xperia home or my lock screen, it causes my lock screen AND the album app to crash altogether.
    Has anyone else encountered these problems? I would really like to solve this problem.

    Check whether your firefox is uptodated!
    Firefox Menu > Quit
    Restart your mobile and try again..
    if your facing same problem, try with beta version
    *https://play.google.com/store/apps/details?id=org.mozilla.firefox_beta&hl=en

  • IPhoto crashes when trying to view pictures.

    Everytime I click on a thumbnail to view the picture, iPhoto crashes. Prior to this I had the problem of the endless loop of "Loading photos...". I thought I had it fixed when I trashed the AppleAppSupport.framework folder, but not entirely. Hope someone can help me with this.
    Powermac G4 Quicksilver   Mac OS X (10.4.2)  

    Hi Ernie,
    That folder and the contents within it it are needed by iPhoto. You need to reinstall iPhoto or copy that folder to your computer from another computer running the same version of iPhoto.
    check out this thread
    http://discussions.apple.com/thread.jspa?threadID=193522&tstart=0
    Lori

  • ERROR (0×0107, 0×0000) WHEN TRYING TO VIEW A VM CONSOLE

    Hi,
    Getting error (0×0107, 0×0000) when trying to view  vm console via vmm installed on a machine registered to different domain.
    When tried  to connect to the VM it will be asked to authenticate against the host and then we will see a warning about an un trusted certificate
    and once we click OK we will receive the (0×0107, 0×0000) message.
    Tried importing certificate of the hosts to the Trusted Root still seeing the same error. Can anyone please help?

    Hi sathish777,
    Because each domain has its secure boundary ,domain trust is needed for comunication between different domain .
    As a workaround , you may try to logon the "client" locally to be a workgroup machine then use hvremote.swf to manage the hyper-v server remotely :
    https://code.msdn.microsoft.com/Hyper-V-Remote-Management-26d127c6
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • When trying to view a pdf from IE10 I get a small square with an X and not the document.

    When trying to view a pdf from IE10 I get a small square with an X and not the document. I have removed reader completely from the control panel and reinstalled version 11.0.4. I have IE 10 10.0.9200.16721. Need assitance in getting Reader XI setup.

    Hi,
    We have heard few users having similar issue as yours and found out the problem for one of the users is this: http://support.microsoft.com/kb/2716529 .
    I was able to reporduce this problem(square with a 'X') by changing the TabProcGrowth registry entry to 0.
    This tool provided by Microsoft is for Win 8, to run this on Win 7 you can manually change the registry setting : please see " Let me fix it myself" in above url.
    Before running these steps please make sure yours indeed is the same problem.
    Please be very careful as some registry settings (not this one) can create serious problems on a Windows system including causing it to no longer boo
    Let me know how it goes.
    Thank You.

  • Error when trying to view YouTube videos

    I get the following error when trying to view YouTube videos in some wireless hotspots; "The server is not correctly configured".  It used to work fine at these locations.

    Maybe not as many people reply as you think should because this site doesn't freaking work either!
    Took me ten minutes to log in! Kept getting stupid error messages telling me this site is undergoing maintenance. Whatever.
    Same exact problem here, but Chrome DOES NOT work. Changing DNS servers DOES NOT work either. It doesn't work for a lot of people.
    https://productforums.google.com/forum/#!topic/youtube/axsb7XPieK0
    EDIT**
    WTF this site is more broken than youtube! Constant errors and constantly unresponsive with "greyed out" buttons!
    Is there any competent people left on the planet to fix this crap!?

  • How can we correct a blocked plug in when trying to view internet videos?

    My son's computer suddenly started stating "Blocked plug in" when trying to view any videos on the internet.  We followed the instructions to upgrade Adobe Flashplayer but have been unsuccessful on many attempts and we have no leads to follow to correct the problem.
    Can anyone help or suggest something?  Thanks.

    Try this, uninstalling and then reinstalling Adobe Flash:
    Uninstall flash:
    http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
    Reinstall Flash:
    http://get.adobe.com/flashplayer/otherversions/
    Select the OSX for you run the .dmg installer (you can go to Safari Preferences/General "Save doenloaded file to:" select other and then select desktop from the left column.
    Run the installer pkg.
    When it has completed, reboot your computer to finish the install.
    Hope this helps

  • Powerpoint crashes when trying to view the drawing toolbar

    Powerpoint crashes when trying to view the drawing toolbar (spinning wheel). Only option is to force quit.
    I've already tried resetting the toolbar and using the disk utility to repair permissions.
    I set up a new User Account on the Mac to test it, and everything works fine on the new account.
    How can I get it to work on my main user account (and also the guest account that's already set up)?
    Checking Microsoft's forum says if it works on a new test account to contact Apple Support.
    Thanks,
    Kevin

    Application corruption problems:
    You need to look in your user Library/Preferences for the .plist.
    Hold down the option key while using the Finder "Go To Folder" command. Enter ~/Library. Delete the .plist(s) for the application.
    If you prefer to make your user library permanently visible, use the Terminal command found below. It does work with Mountain Lion:
    http://osxdaily.com/2011/07/22/access-user-library-folder-in-os-x-lion/
    You might want to bookmark the command. I had to use it again after I installed 10.8.2. I have also been informed that if you drag the user library to Finder it will remain visible.

  • When trying to view the Paul McCartney live concert, I received an error that this computer does not support live streaming

    When trying to view the Paul McCartney live concert, I received an error that this computer does not support live streaming

    If you're referring to streaming via itv.com, the minimum system requirements can be found here.

  • Chuckwagons post - error when trying to view

    In trying to view chuckwagons post, "just received my new iMac 2.1" (http://discussions.apple.com/thread.jspa?threadID=319765&tstart=0), I keep getting an error. It just says an error has occurred and we apologize for the inconvenience. However, I notice that new posts are being added so some folks are able to read and post. Is anyone else getting an error when trying to view this post? I've tried Safari, Firefox and IE. I'm trying to make up my mind as to which iMac I want - G5 or Core Duo. Right now I'm leaning towards the G5 and it would be nice to be able to see what chuckwagon has to say.
    Eric S.
    Mini 1.25, 512MB RAM, 80GB HD   Mac OS X (10.4.4)   G4 DA 533MHz DP w/Giga dual 1.8GHz upgrade, 1.25GB RAM, Radeon 9600 Pro

    This is really beginning to tick me off. There has been another post to chuckwagons message and a lot more views. However, I am still getting the same error that I've been getting since yesterday. And it doesn't matter which computer I'm using, the result is always the same.
    Arrghhh!!
    Eric s.
    Mini 1.25, 512MB RAM, 80GB HD   Mac OS X (10.4.4)   G4 DA 533MHz DP w/Giga dual 1.8GHz upgrade, 1.25GB RAM, Radeon 9600 Pro

  • Popup when trying to view documents with thumbnails

    Is there any standard method to avoid the popup in EasyDMS when trying to view a document with a thumbnail attached? When you double click the document to view it, a pop up appears asking you which file you want to view.

    This should not come. Have you configured thumbnails properly.Please check following.
    Do you have type THU in DC30 trxn?
    Is this type have values in "FileFormat" column with the mime types you use ?
    eg:- 
    .jpg,.jpeg,.tif,.bmp,*.ppt
    Is the field * MIME TYPE*  has  value image/jpeg ?

  • Error message when trying to view/print Crystal reports in B1

    I get the following Error message when trying to view/print crystal reports in SAP B1/Crystal Reports Integration Tool for SAP Business One:   
    " Could not load file or assembly 'Crystal Decisions Windows Forms, version=12.0.2000.0, Culture=neutral, Public Key Token=692fbea551e1304'  or one of its dependencies.  The system cannot find the file specified.  ????

    Hi
    Common issues for this :
    1. Once you install crystall add on ,you need to go to Crystal report Administration >Account setup .
    Put on the user name and password and click on creating ext tables
    Try then running the report .
    If not the case ,
    make sure you install runtime .
    You need :
    1.Crystal report basic from SAP download -(Not necessary if you want only report viewer >
    2.You need to have crystal integration addon (I think service pack is SP1)
    3.Make sure you have runtime install
    When you are installing ,make sure you restart your PC before you do or remove temporary file s
    Hope this solves your issue
    Bishal

  • Palm Desktop shuts down when trying to view calendar by month

    I'm using a Palm TX with the latest edition of Desktop installed (I think that's 6.2).  Everything is normal except, suddenly, I cannot view my calendar in monthly view.   Daily, weekly and yearly all work fine.  Desktop shuts down when trying to view in monthly view.  I did a system restart, a Desktop reinstallation, a download of the latest version and installation of that version and, finally, uninstallment of the existing Desktop, download of the newest version and installation of that version.  Nothing seems to enable me to view the calendar in monthly view.  This is a spontaneous event.  I've been running Desktop on a Vista Ultimate system since February without incident.  I have no idea about how to solve this.
    Thanks
    Post relates to: Palm TX

    Well, here's where we are now.  It's a good thing that I have desktop on my office computer because when I tried a Hotsynch with my home desktop, Hotsynch wiped out all the data on my handheld and then hung up both the handheld and desktop in the middle of the Hotsynch.  I'm going to overwrite the entire handheld with the office desktop file.  As for the home setup, I'm thinking the only thing I can do now is uninstall Palm and wipe out the entire directory of files.  Am I correct about this?  Do I need to do a clean uninstall?
    Post relates to: Palm TX

Maybe you are looking for

  • How to use Smart Card API's (OCF) in Web Application

    Hi frnds, For our new smart card based project, i have few queries, 1. Can we choose web based application for smart card based projects? 2. How servlet will communicate with opencard CTListener class? 3. While the card insertion and remove how the e

  • Inserting PDF file into Clob

    Hi, I tried inserting PDF file into a CLOB column , in the below example l_bfile is a bfile datatype. and I'm inserting l_bfile to CLOB column. l_bfile := bfilename('C:\test', 'test.pdf'); But It is throwing below error: ORA-06550: line 9, column 42:

  • Custom module template

    I've tried this out. The list template works, but how do I get the list-template to direct to my custom detail template?

  • Subtotal in Matrix reports at break groups - very urgent

    Hello, I have a matrix group with 2 break groups above. So I have Group 1 Group 2 G_Cross G_Column G_Row The wizard gave me the subtotal for Group2. I cannot figure how I can get subtotal for Group 1 which is the top break group. Please Please help.

  • User SAAPOS has no RFC authorization for function group SYST

    Dear Experts , I am facing this issue kindly help me to sort out this issue. User SAAPOS has no RFC authorization for function group SYST Thanks in advance Thanks & Regards, Srinivasan.V Moderator message: please search for available information and