Number of 1s or 0s from a boolean array

How to find the number of 1s or 0s from a boolean array. e.g. in 101011, there are four 1s and two 0s.
Solved!
Go to Solution.

ABBPAK ha scritto:
Hi,
When you talk about the value change, how to predefine the first value and the last value. e.g. 1100011. here just twice a time value changes but there are four 1s and three 0s.
thanks
Did you focus on the word "sort"?
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Similar Messages

Assigning a number value to a line from file without array

How do you assign a number value to a line from a file? I want to use the assigned number so that the i can use random number to randomly select a line
Example. i have the lines A,B,C,D,E
A
B
C
D
E
i know that a is line 1 b is line 2 so on so on
(1) A
(2)B
(3)C
(4)D
(5)E
so from here i would use the random number generator so that i could randomly select one of these. I already know how to code for the number generator but how would i make it so that i can access each individual line as a number?

ya that's what im using but reguarding the code i dont think it does what im looking for. yes it does provide a random line but wen i run it multiple times it gives me the same line repeatedly. also i need to be able to refer to that line in the future so in the code the String line gets replaced each time
BufferedReader bF = new BufferedReader(new FileReader("someFilePath"));
          String line;
          int someRandomNumber = 9;
          int counter = 0;
          while ((line = bF.readLine()) != null){
               if (counter == someRandomNumber){
                    break;
               counter++;
          System.out.println(line); //line at #someRandomNumber in the file

Wait icon showing in boolean array to number

Hi,
Can anyone shed a little light on an extra little chunk of icon that I'm getting on a 'boolean array to number' function?
I seem to be getting a small 'wait' icon superimposed in the corner. The context help entry seems the same and the functionality seems the same (as far as I can tell).
The piece of code I'm using was converted from a newer version to V8.5 but other than that should have nothing unusual about it.
The image below shows the offending icon with another that is fresh off the palette next to it.
Am I missing something?
Thanks in advance for any tips.
All the best,
Ian
Solved!
Go to Solution.

Hello Ian,
This is the first time I have seen this icon adaptationion in LabVIEW. I have started trying to reproduce the issue by creating a simple VI in LabVIEW 2009 and converting it for LabVIEW 8.5. The icon has not appeared.
The 'Boolean array to number.vi' has properties associated with it. You can right click on the VI in the Block Diagram and select 'Properties'. Some options are activated depending your prefered representation. For example, when using Fixed Point (FXP) you have the option to select a 'Desired Delta'. Desired Delta could imply a time function.
Which version of LabVIEW did you convert down from?
Is the VI running on a Windows target? Which version?
What number data type are you converting the boolean array to?
Regards,
George T.
Applications Engineering Specialist
National Instruments UK and Ireland

Use boolean array to perform set operations

I am currently taking a computer science class that uses Java as the language of choice. I have no prior experience with Java. We have a homework assignment in which we are supposed to use a boolean array to implement set operations. We have to create a method that inserts an integer into the array, another that deletes an integer element, and several others. I am confused as how to do this with integers, as it is a boolean array. The datr for this class is:
private boolean base[];The constructor is:
public largeset(int size){ }We then have to create a method that inserts an integer into the array:
public void insert(int i){ }And one that deletes the element:
public void delete(int i) { }I am unsure how to do this using a boolean array. If it were an integer array I would not have any trouble, but I get an error when trying to insert/delete an integer from the boolean array. Can anyone help point me in the right direction? I would prefer advice only, not the actual code, as this is a homework assignment, and I would like to create the code myself so I actually know what I am doing. Thanks.

This is the assignment exactly as posted on the course website:
In this homework, we will use a boolean array to implement various set operations. Please create a class called largeset that supports set operations of any number of elements. The data of this class is
private boolean[] base;The constructor of the class is
public largeset(int size); // create a boolean array of size "size" and store it in "base"The methods of the class are:
public void insert(int i); // insert number i into the current set, where 0 <= i < base.length
public void delete(int i); // delete number i from the current set, where 0 <= i < base.length
public boolean member(int i); // test if i is in the set
public largeset union(largeset B); // return the union of two sets
public largeset interset(largeset B); // return the intersection of two sets
public largeset subtract(largeset B); // return the subtraction of two sets
public largeset complement(); // return the complement of the current set
public boolean subset(largeset B); // test if the current set is a subset of set B
public int cardinality(); // return the number of elements in the current set
public String toString(); // return a string which is a printing of the current setThen create another class called testset that uses the largeset class. At first, please create the following two sets:
X = { 1, 3, 5, 7, ..., 999 };
Y = { 9, 18, 27, 36, ..., 999 };
Please perform the following tests:
1. display the cardinalities of X and Y, respectively.
2. display the content of substraction of Y by X.
3. display the square root of the sum of all the elements of X (Math.sqrt(x) will return the square root of x in double type).
4. For every pair of distinct elements x and y in Y, compute the sum of (Math.max(x, y) - Math.min(x, y)) (or equivalently, Math.abs(x - y)), and report this sum.

1D Boolean Array to 1D Integer Array conversion for FPGA FIFO

Hello, I am using a PXI7813R card. I would like to pass some data between the target (FPGA) vi and the host vi using the FIFO. I have a FIFO setup to 1023 "32 bit integer" samples. I have a boolean array of 32000 samples which would be the same as 1000 32 bit integers, that I acquired using the PXI7813R card. I would like to convert the 1D boolean array to a 1D "32 bit intger" array. This seems like a more a difficult problem than I first thought as the labview functions are reduced when targetting a FPGA device. I have attached a jpg of how I would like to do it. I am getting a "Arrays must be fixed size in current target" error for the output from the array subset function. I know this is because one of the inputs is not exactly a constant, i.e. the index input for array subset, but regardless of the index, I will only ever be taking 32 bits from the boolean array at any time to convert to a 32 bit integer to then place in the FIFO. Any suggestions of how I may get around this problem would be gratefully recieved. Regards, Michael.
Message Edited by Michael_Limerick on 02-08-2008 04:54 AM
Attachments:
fifo_out1.JPG ‏52 KB

Hi Daniel,
Thanks for your reply.
I had a look at the thread that you suggested and I'm not sure if that would solve the problem I was having, the option box was checked as default. I think my issue has to do with the limitations of the different LV functions when targeting a FPGA device.
I have decided to take another route anyway, it seems that trying to compile a large array (even a 1D boolean array) for a FPGA target both takes a long time and also a lot of FPGA resources.
Thanks again for your reply,
Regards,
Michael.

How do I count the number of 1's in a Boolean Array??

I have a boolean array of 1000 0's or 1's and want to know the number of times this array is in the 1 position.
The array is repeated within a structure and i need a number for each iteration to be passed onto the next (using a shift register).
Never really used boolean arrays before so none of the standard things i use seem to work?
Thanks in Advance.
Ross

Ross,
The quick easy way is to convert the boolean array to a 0-1 array from the boolean menu, then sum the array using "sum array elements" from the numerical menu.
Bruce
Bruce Ammons
Ammons Engineering

Boolean array to number

I'm not sure if this has ever been brought up before, but if so, here it is again. Lets say I have a Boolean Array shown with 8 elements arranged horizontally. When I read it, I usually read left to right, meaning the MSB is on the left and the LSB is on the right. However, if I use the Boolean Array to Number funtion, this function reads right to left. Same for the Number to Boolean Array function, It will form the array from right to left. This goes against normal boolean reading habits. I know this isn't a bug because it was probably meant to operate as such. The VI shown below illustrates what I mean. Three questions:
Why is it done this way?
Why not make the functions configurable to read in either direction?
The term Big Endian / Little Endian applies to byte order in a 16-bit word broken into two bytes. Does it also apply to bit order in a U8?
Here is the VI:
- tbob
Inventor of the WORM Global
Solved!
Go to Solution.
Attachments:
BoolArrayToNumber.vi ‏10 KB

tbob wrote:
Why is it done this way?
Why not make the functions configurable to read in either direction?
The term Big Endian / Little Endian applies to byte order in a 16-bit word broken into two bytes. Does it also apply to bit order in a U8?
Bit ordering is (almost) always consistent. The lowest order bit is bit 0. In LabVIEW's array representation, index 0 is on the left, so you see it what you consider to be "backwards." If this were changed, or configurable, it would be confusing when you feed only a few bits of an array into boolean array to numeric. I expect that if I build two TRUE values into an array and then convert that to a numeric, that those two TRUE values will be in the low-order bits and the rest will be padded with zeros; anything else would puzzle me.

Selecting specific data from an array controlled by a boolean array

Hi!
I am trying to select specific data from a string array. The string data should be auto indexed to a string array indicator, but I just want specific values to be placed in the new array.
A boolean array controls when data should be auto indexed to the new string array. Every time a true appears in the for loop, the string data should be placed in the new string array, but I have a problem. I manage to pick the specific data to place in the new array, but i also get empty strings in the array when I am not supposed to write to the array. Instead of empty strings, I want my string data to be "compact". So when bool number 3 in the array is true, I want that string data to be in row 1, and not row 3.
Can you help me sort this one out?
Best regards
Is my avatar the dog from the fraggle rock?
Attachments:
testprogram_forum.vi ‏10 KB
Spørsmål lwforum.jpg ‏74 KB

Here is a different version that also changes the size of the array for the indicator when the value is changed. You could do as much as you want here.
Tim
Johnson Controls
Holland Michigan
Attachments:
testprogram_forum 2.vi ‏12 KB

I am trying to install Lightroom and I am OK until it asks for a serial number. I purchased Lightroom from B&H and the have entered the seal number on the the B&H invoice. Nothing happens, not all the entry boxes are filled with the serial number that was

I am trying to install Lightroom and I am OK until it asks for a serial number. I purchased Lightroom from B&H and the have entered the seal number on the the B&H invoice. Nothing happens, not all the entry boxes are filled with the serial number that was provided by B&H. I looked for a serial number on and in the box it came in, nada. Need a bit of help here, what can I do?
RJ@

Try to connect on Live chat one more time.
Still not connected , better to contact Adobe Phone Support
Click on Phone option and check once :
Contact Customer Care

What happens if i enter phone number while erssing ios device from icloud?

I want to remove my iphone4 device from find my iphone over the cloud. Because i forgot the passcode of my iphone. Now i want to restore it from a backup.
itunes wouldn't let me do it because "find my iphone" is enabled in iphone settings. Moreover i was able to remove device from icloud. But itunes still asking me to turn off "find my iphone" from iphone settings. What i am missing here? is it because I entered phone number while erasing ios device from icloud or something else?

If you force it into recovery mode as explained here: http://support.apple.com/kb/ht1808 you'll be able to restore it.

Hi I currently update my iPad 2 to iOS, I had a number of films that purchased from my iPad from itunes, which are no longer in my iTunes or on my computer. How do I go about retrieving theses films?

Hi I currently update my iPad 2 to iOS, I had a number of films that purchased from my iPad from itunes, which are no longer in my iTunes or on my computer. How do I go about retrieving theses films?

Movies are not re-downloadable anywhere but in the US at present, so unless you are indeed in the US, you'll need to restore the movies from your backup.
Regards.

How can you create a local variable from a boolean control?

I want to create a local variable from a boolean control, but it says that boolean latch actions are incompatible with local variables, but I need a way to check this boolean control in two differents loops, how can I do it?

"Graci" schrieb im Newsbeitrag
news:[email protected]..
> I want to create a local variable from a boolean control, but it says
> that boolean latch actions are incompatible with local variables, but
> I need a way to check this boolean control in two differents loops,
> how can I do it?
Use global variables.
Compare them with a constant Boolean like F or T.
The result is true or false and then you can use it in a Cae-Loop.
Martin

How to change the elements number in Number To Boolean Array Function VI

Hi, I'm working on using the DAQ digital output to control the digital input of a DAC, and I used the Number To Boolean Array Function. VI to convert the number to a Boolean array. The maximum number should be 4096, therefore it should consist of 12 elements.
For the description of the VI, it says Boolean array returns an array of 8, 16, 32, or 64 elements, depending on the number of bits in the integer. Therefore, I change the number of the channels in task to 16, but it still doesn't work. Any suggesitions are greatly appreciated.
Thanks!
Possible reason(s):
Write cannot be performed, because the number of channels in the data does not match the number of channels in the task.
When writing, supply data for all channels in the task. Alternatively, modify the task to contain the same number of channels as the data written.
Number of Channels in Task: 12
Number of Channels in Data&colon; 32
Task Name: _unnamedTask<1B>
Solved!
Go to Solution.
Attachments:
DAC test.vi ‏47 KB

Once you have the boolean array, you can resize it using array tools. For example you can use "reshape array" with a lenght of 12 to trim the array to 12 booleans elements (you can also use array subset).
LabVIEW Champion . Do more with less code and in less time .

Can we find the number of rows in table from the dump file

Hi All,
Can we find the number of rows in table from the dump file with out importing the table in to the database?
Please let me know ,if any option is there.
Thanks,
Kumar.

<s>Try to import with option SHOW=Y, that should skip the number of rows which are into a table from a dump file.</s> 
 
Nicolas. 
Oops, sorry, that doesn't show the number of lines... 
Message was edited by: 
N. Gasparotto

What is the max number of bits a boolean array can have?

Hello,
What is the maximum number of bit that a boolean array can have?
Regards,
Kaspar
Regards,
Kaspar

There is no real size limit. (except for the natural limits of arrays because the size is a 32bit integer, etc.)
... of course if you ever plan to convert it back to an integer using "boolean array to number", you better stay below 64 bits.
Can you explain what you want to do in a bit more detail?
Message Edited by altenbach on 05-23-2007 02:51 PM
LabVIEW Champion . Do more with less code and in less time .

Number of 1s or 0s from a boolean array

Similar Messages

Maybe you are looking for