Number of bpms in pi

Is there any limitations on the number of bpms that can be created in PI at one time?
We have a idoc to file scenario (bpm). The peak volume could be say 5000 idocs at one time. and each will create its own bpm instance.

No limitations for the number of instances.

Similar Messages

Set maximum number of BPM nodes

Hy all,
can someone tell me how can i set the maximum number of bpm node in XI.(Transaktion for example)
Thank's a lot.
Mat

Hi Jürgen,
You can try changing this with TCODE: SWPA
"Maximum node number" parameter
By default the value is 10.000 (at least on my DEV XI)
maybe this will help you
Regards,
michal

How to save IDOC number in BPM to use in ALEAUD

Hi Experts,
I am doing IDOC - BPM - sync SOAP scenario, i am using async to sync bridge in BPM, how can i get original IDOC number so that i can use it in webservice response message to ALEAUD mapping??

hi
you have to use Configurable Parameters in the ccBPM. in runtimeyou assign the IDOCNUM field value to the parameter and then use it in the response mapping (WSDL-ALEAUD). you have to define the parameter in the Message Mapping under the Signature Tab.
Also you have to bind the parameter in the Operation Mapping. to do this,define a new parameter in the Operation mapping and then bind it with the parameter defined in the message mapping.
see this blog to know how:
SAP PI 7.1 Mapping Enhancements Series: Parameterized Message Mappings
rgds
RP
Edited by: Rodrigo Alejandro Pertierra on Nov 3, 2011 3:49 PM

IDOC Number in BPM (Bhavesh & Michal Help)

Hi ,
I tried the using the concepts from the blog (/people/mitesh.parekh/blog/2008/12/01/receiving-aleaud-as-acknowledgment-in-ccbpm)where i have the Message ID which entered into BPM
but not the message Id which triggered the IDoc send . I think i m missing some small detail where i need to capture the send step MSG Id
i'm aware that its not possible to get the Msg id in BPM . How is that ABAP Mapping in the above blog captures the message id ?
TRY.
l_msgid_ref = param->get(
IF_MAPPING_PARAM=>MESSAGE_ID ).
catch CX_SY_REF_IS_INITIAL into oref.
endtry.
Alternatively one more thread has some info
if someone can let me know where you can get this SourceDocNum would be great in this RFC Look up . in the thread Re: Idoc Acknowledgements and BPM.
"<?xml version=\"1.0\" encoding=\"UTF-8\"?><ns0:RFC_READ_TABLE xmlns:ns0=\"urn:sap-com:document:sap:rfc:functions\"><DELIMITER/><NO_DATA/><QUERY_TABLE>IDXRCVPOR</QUERY_TABLE><ROWCOUNT/><ROWSKIPS/><DATA><item><WA/></item></DATA><FIELDS><item><FIELDNAME>SNDLAD</FIELDNAME><OFFSET/><LENGTH/><TYPE/><FIELDTEXT/></item></FIELDS><OPTIONS><item><TEXT>IDOCNUMBER EQ '"
+ SourceDocNum
+ "'</TEXT></item></OPTIONS></ns0:RFC_READ_TABLE>";
Since i do not have the Message ID it just creates the below payload from my mapping
This is the request being sent out using the ABAP Mapping as the Messgae ID is null .
<?xml version="1.0" ?>
- <ns0:ZALEAUDIT4XI xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
<S_DOCNUM>0000000000000000</S_DOCNUM>
<S_MESTYP />
<S_SNDSYS />
<S_UPDDAT>00000000</S_UPDDAT>
</ns0:ZALEAUDIT4XI>
Looking forward for Help .

hi
you have to use Configurable Parameters in the ccBPM. in runtimeyou assign the IDOCNUM field value to the parameter and then use it in the response mapping (WSDL-ALEAUD). you have to define the parameter in the Message Mapping under the Signature Tab.
Also you have to bind the parameter in the Operation Mapping. to do this,define a new parameter in the Operation mapping and then bind it with the parameter defined in the message mapping.
see this blog to know how:
SAP PI 7.1 Mapping Enhancements Series: Parameterized Message Mappings
rgds
RP
Edited by: Rodrigo Alejandro Pertierra on Nov 3, 2011 3:49 PM

How to handle parked message in BPM?

Hi,
I have a scenario that buyer as R3 send PO(same PO number) change idoc multiple times into bpm without receiving PO change confirmation(from seller, non R3) yet, I have a loop in bpm to handle this case, the loop checks the condition whether confirmation matches change request, if not, potential loop repeats. However, if I have multiple change request(same PO number) sent from R3 to BPM, my BPM waiting for my order confirmation, then if the first order confirmation comes into BPM matches with the first change request, then I exit the loop, but I still have several change requests parked at processXXXXX yet to be processed, does anybody came into similar situations? Any good suggestions or examples?
Thanks,
Maggie

Hi there,
I need to correlate ChangeConfirmation to ChangeRequest with PO number, this is for the purpose of ChangeRequest waiting for Confirmation for the same PO number. However, I don't know how to handle multiple changes come into BPM without confirmation yet, my current design is that I immediately enter a loop in BPM, with condition confirmation Info doese not match change info, thus the change request is bundled with bpm process, once the porcess is finished(response match change request), the queue of my other change requests(the parked ones) now got deleted, does anybody have any good suggestions in handling multiple change request(for same PO number) in bpm? Is there a way I can force bpm to handle one request one response, throw some error message if multiple changes comes together without response yet? Anybody had encountered similar issues?
Thanks,
Magge

BPM messages stuck In Process - never get sent

Hi all,
We have had a number of BPM processes running successfully in our XI 3.0 DEV SP17 system for weeks now but suddenly, none are now working. Our BPMs wait a specified amount of time before creating a bundled outbound message. In SXMB_MONI, the Outbound Status is a timer status. The workflow logs mappings are all complete but the Block above is stuck in the status In Process. This never changes and no message is sent no matter how long you wait. There are no errors listed anywhere. To try and fix this, we have performed the following steps and then retried but to no avail:
1. Re-registered and re-activated queues in SXMB_ADM
2. Deleted all work items in SWWL
3. Checked for event problems in SWEQADM
4. Checked for errors (none given) but done a cache refresh anyway in SXI_CACHE
5. Checked in the Process Builder under Goto -> Basic Data -> Start Events tab that the workflow is active
6. Restarted the server
What else can I check to free up this blockage or reactivate whatever isn't running?!
Many thanks,
Stuart Richards

Hi Stuart Richards,
Similary I too faced the Problem, Try for SLD Cache refresh,
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Did you tried this option,
Transaction code : SXI_CACHE
Go to menu
XI Runtime Cache -> Start Complete Cache refresh.
Thanks & Regards
Agasthuri Doss

BPM Scenario Development

Hi
I am using BPM for the first time and have tried to reach at a certain stage. The process is
FIRST STEP
Legacy File(MQ Series)-------> SAP XI(Validation)
<------ Back to legacy if Error
SECOND STEP
SAP XI(Via Proxy)One record at a time -
> SAP R/3(Validation on Data)
<----
Back to XI with validated Data(Via Proxy)
THIRD STEP
SAP XI(Validated Data Posted via IDOC) -
> SAP R/3
The STEP 2 and 3 will be repeated for every record and 'N' Number of Idocs will be posted and finally the Error if any will be posted back to legacy system.
I have designed Interfaces(Abstract also) for every process, but dont know what all objects and process to put in BPM. The First receive step contains the abstract interface for receieving message in BPM. Need to understand how to proceed in building the above scenario.
If possible kindly notify the steps involved and how to build this one. When and where I need to use Transformation, Switch and block etc.
Best Regards
Swetank

Hi,
>>>When and where I need to use Transformation, Switch and block etc.
at first check read this - you have to know which steps are used in which case:
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
I think you can do it all in one integration process
(all of your three steps)
>>>The STEP 2 and 3 will be repeated for every record and 'N' Number of Idocs will be posted
you may try Anish's approach to cut your legacy file to a number of messsages (lines for instance)
take a look at his weblog:
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
but please first read the documentation on process steps to understand how BPM's are build
also there's a number of BPM weblogs which you can find on my XI FAQ page (question 3 - documents section):
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
it would be wise to read them too as they are very easy even for a "BPM begginer"
Regards,
michal

Why my BPM related job goes to sceduled state in sxmb_moni?

Hi Gurus,
I am facing a unique problem in a sample BPM scenario. When I run this scenario my corresponding request in sxmb_moni goes to sceduled state. I have to go to QRFC monitor to unlock it. After this my BPM request runs to success. I am not able to understand why this is happening. Why it does not run in one go without getting locked in QRFC?
My BPM scenario is like this: I am sending a customer number from a ABAP program from SAP R/3 system to XI system via outbound Async interface. This inturn sends customer number to BPM via abstract interface. The BPM then gets customer data from MSSQL server via JDBC adapter and inbound interface.
This scenario is Async-Sync type.
I don't see any problem with the mapping, interface etc.
The scenario runs successfully once I unlock the request in QRFC monitor.
Can somebody help me identify the reason why my BPM request goes to sceduled state in sxmb_moni?

Can you try activating/registering your queues .
sxmb_adm -> manage queues -> activate queues / SXMB_ADM -> Manage Queues -> Register Queues.
Also in SMQ2 activate individual queues if any.
ShabZ

How to query in bpm to generate next seq key

Hi,
I am working in 5.7 and DB2, I am able to insert a record in a table using Fuego.Sql.SqlObject.store() provided i assign the primary key value
prmary key needs to be generated using 'SELECT NEXT VALUE FOR BPMPR.BPM_KEY_SEQ FROM SYSIBM.SYSDUMMY1'
This query returns the next seq number outside bpm. but when i use it with in bpm, it complains : Unexpected value
Suggest me how to get the sequence key which is returned by 'SELECT NEXT VALUE FOR BPMPR.BPM_KEY_SEQ FROM SYSIBM.SYSDUMMY1' query.
I cannot use 'SELECT max(rqstKey) as nxtrqstKey FROM BPMPR.TABLE' to get the primary key value
Thanks!

Hi
The first thing you might want to try is to change your logic in ALBPM to use Dynamic SQL to run your query.
Here's the syntax that might work. The logic below assumes you named your database External Resouce "DbWithTheMostest".
nextId as String[]
query as String = "SELECT NEXT VALUE as nxtRqstKey FOR BPMPR.BPM_KEY_SEQ FROM SYSIBM.SYSDUMMY1"
externalResourceName as String = "DbWithTheMostest"
for each row in executeQuery(DynamicSQL, sentence : query, implname : externalResourceName) do
// keep adding customer names to the array until all the customers have been added
nextId[] = " " + row["nxtRqstKey "]
end
The second thing you might want to try is to catalog an SQL Query (vs. SQL). During the introspection, you'll be prompted to enter your sql.
Hope this helps,
Dan

BPM Modelling !

Hi XI Gurus.. I need advice in modelling a BPM.
We have a scenario
1.) ECC sends Async request to PI ( there are three actions Create, update and Modify we are using webservices)
2.) PI makes Sync call to External system( We are using webservices).
3.) PI updates the response from External System to ECC .(Async call)
An order request comes to PI from ECC (lets say Create order), at that point of time if the external system is down, PI has to retry the message. (This can be done using a blocks exception handler in BPM) . If a Modify request comes for the same order number then BPM should not send it unless the Create request for that order is not successful. Meanwhile if a new order comes in then BPM has to process it. I guess this is not exactly a EOIO scenario, may be correlation......... Inputs will be appreciated. !!!

Pramod,
Is there any field coming from ECC that decides you need to call Update or Modify webservice?
raj.

BPM SEND Steps

HI,
Can anyone tell Maximum number of BPM SEND steps we can have?
Regards;
Akshay.

Hi Ram,
Ok do one thing create a container variable. Dont use this container variable in any steps. now pt a condition at the point whr u want to check whehter the container variable in which u r receiveing the msg is not equal to this newly created container variable. If the condition is satisfed, u hv receive the msg i.e. ur container variable is not empty.
Regards,
Akshay
Message was edited by:
Akshay Salunke

Port number 8686

The port number of bpm admin of BPM for weblogic 10.3.1 and BPM standalone 10g is 8686.
I need to change it.
Does anyone how to change the port number?

How to redeploy the workspace?
Should I do the following steps?
1 stop BPM and weblogic domain
2 start BPM and BPM admin console
3 start weblogic domain
In step 3, will the workspace be redeployed to domain?
Or I should redeploy the workspace manually?

ITunes won't let me keep my album tracklists in the order that I want them

Here's what I mean. The other day, I imported The stone Roses into iTunes using my friends CD. I couldn't import song 9 because the disc is heavily scratched and it won't copy. I bought the song online and imported it into iTunes. The problem is, it's appearing in a duplicate album, all by itself. I now have two albums titled The Stone Roses in my library, one with just song 9 and the other with all the rest. The thing is, I CAN'T seem to be able to shift 9 into the other album. All the information is identikit to the other 10 songs. Same album name, genre, disc number information, track number information, BPM information, it's all the same. But 9 will not move. Why not?
Second, I have Trainspotting CD1 and imported it into iTunes. There are some songs off CD2 that I like so I want to put them with the CD1 songs. One was Heaven 17, Temptation, which I bought from the Music Store. I changed it's info and aligned it with the other Trainspotting songs. I had to change all the track number infos because there are no 15 songs in the album instead of 14. Yesterday, I bought another song, Dark and Long by Underworld, and tried to link it with Traisnspotting CD1. It will not link properly. It appears in the album, yes. But I can't get it to be song number 10 like I want. It just goes to 4 and to boot, pushes up song 8, Sing, to position 5 as well, for some strange reason.
Basically, why won't iTunes let me order songs THE WAY I WANT THEM ORDERED!?!?!? How do I correct this?????

Thing is, they can look identical but not be. When she said "_" she was highlighting an extra speca at the end of the name.
Do this:
Click on the first track.
Shift+Click on the last track. This should highlight all thetracks in between.
Right Click and choose Get Info.
Either the Artist field or the Album field will look blank. This is the one that needs adjusting. Enter the appropriate info and save.
If both fields are empty, enter the proper artist and album info. Save
Now you should have only one entry for that album.

Limitations on Using Human Task advance routing rules and stages

In one of our requirement we have used human task with different number of stages (14 stages ) and for all this we are using only one human task component and to route the task through different stages I am using advance routing rules (30 rules),we have exposed this through bpel .My code is working fine .
My question is:-
1- Do this kind of design contain flaws, is there is any restriction on using of number of stages and number of routing rules. Is there is any best practise which suggests that we cannot have more than certain number of stages or routing rules..??
2-Is it feasible to use different human task component for each of the human task stages and route the data using business rule, but that will be very exhausted and unnecessarily making bpel heavier, also the front end people will be having more number of bpm urls which will make their work tedious.
Please suggest .
Thank you

This doesn't sound good. That's an EJB internal to BPEL if I'm not mistaken. Did the install go ok? Has this ever worked before?
I'd check the logs on startup for any sign of an exception. This may be the symptom of a problem which will be logged on startup.
Also, search metalink and open an SR -- this EJB isn't something you need to configure in a normal install -- at least not that I'm familiar with.

Counting the number of IDocs in a package of IDocs in BPM

Hello All,
I need a solution where I need to count the number of EDI_DC40 segments (The IDoc Count) in a package of IDoc's. The following is the scenario
1) We are receiving a package of IDoc's in receive step using the XI File Adapter. I was wondering if there is a way that I can count the number of IDoc's in the BPM using a container operation or some other Method. I appreciate any help.
Thanks.

HI,
We have two ooptions,
one as explained above , yu can use standard count function and that can be used.
Second one is we have count option in file adapter to count the msgs.
see the below link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0b/9a50465ccf84479e39a6d50c90fb3f/content.htm
Regards
Chilla

Number of bpms in pi

Similar Messages

Maybe you are looking for