Number of collect calls per day

is there a limit of collect calls you can recieve per day? my boyfriends has tried to call and he gets a messge sayin the call can not go thru due to a limit?

Hi,
This you can get by running the below query on the ICM DB.
select count (*) as amt,ANI from Route_Call_Detail
where DateTime > '2013-02-28 00:00:00.000'
and DateTime < '2013-02-28 23:59:59.000'
group by ANI
Regards
Sandeep

Similar Messages

Logic to calculate average number of employees per day...

Hi,
In an internal table, i have employee number, start date, end date.
This table shows employee's start and end dates for a cost center.
Now, the requirement is to calculate the average number of employees available per day for a given period...
Lets asume that we would like to calculate average number of employees per day for a given period of 30 days (01.01..2009 to 30.01.2009)....
The above table will have around 20 employees with their start and end date.
Among these 20, some may be present between 1st to 10th Jan only..
In such case, How to calculate average number of employees per day in such case?
Can anyone help me out with a rough sketch of logic for this calculation?
Thanks in Advance,
Pavan

My Logic:
1) First choose dates from which date to which date you are planning to calculate. [Here i am trying to calculate from Jan 1st 2008 to till date - March 3rd 2009 = So total days = 427 days]
2) First try to count number of days worked in organization by each employee. [Lets take employee a = 10 days, b = 182 days, c = 427 days].
3) Then total all the number of days. [abc = 10182427 = 619 days].
4) Total number days / Total number of days worked = 619 / 427 = 1.44 employees per day.
Employee     Emp-Start Date     Emp-End Date     No. of days
a             Jan 1st 2008     Jan 10th 2008     10
b             Jun 1st 2008     Jun 30th 2008     182
c            Jan 1st 2008     3rd March 2009     427
          Total No. of days                     619
     From Jan1st 2008 to Till date 3rd March 09          427
          619 / 427 =     1.449648712
I tried take simple example to recheck the above scenario is correct or not. If 'n' number of employees worked for an organization in a year (365 days) is 730. then per day = 730 / 365 = 2 employees per day worked for organization.
I am not sure my logic is correct or not ... just tried like above.
Regards,
~Satya

How to limit number of logins per day?

We have a custom web application (WebAS 6.20) used by people and automated systems. Each user has his own login, and some of these automated systems sometimes produce heavy load because they log into system too often.
Is there an easy way to:
1) limit number of logins to, say, 1000 per day and when this limit is reached - do not allow this user to login till midnight
OR
2) dedicate one of the processes to the specific user
thanks in advance

extend PlainDocument class to restrict the number of characters per line.
Set this class as model to TextArea.
Below is a class which does this. May be its useful
import javax.swing.*;
import javax.swing.text.*;
import java.awt.*;
public class FixedNumericDocument extends PlainDocument {
private int maxLength = 9999;
private String max="";
public FixedNumericDocument(int maxLength) {
super();
this.maxLength = maxLength;
//this is where we'll control all input to our document.
//If the text that is being entered passes our criteria, then we'll just call
//super.insertString(...)
public void insertString(int offset, String str, AttributeSet attr)
throws BadLocationException {
if (getLength() + str.length() > maxLength) {
return;
else {
try {
//check if str is numeric only
int value = Integer.parseInt(str);
//if we get here then str contains only numbers
//chk if it is less than 65535 so that it can be inserted
super.insertString(offset, str, attr);
catch(NumberFormatException exp) {
return;
return;

I bought my iPhone 4s in the Uk and then brought to Cyprus where I live. I used Siri to call my husband 2 days ago without problem but now when I try to use Siri it won't call any local Cypriot number but will call my Uk contacts. Help please

I bought my iPhone 4s in the Uk and then brought to Cyprus where I live. I used Siri to call my husband 2 days ago without problem but now when I try to use Siri it won't call any local Cypriot number but will call my Uk contacts. I can call the same numbers manually so it's not my network. Any help would be appreciated.

This sounds like an international issue? Although I can not see why? I brought my phone in Australia and operating it in Indonesia, I have the same issues.... Otherwise Siri works fine, even texting (SMS) to local numbers siri works well, but dialing local number it just wont work...! I will try using my Australian SIM card and see if that is the reason.. I tried changing the number in the contacts and took out the international prefix, I turned the international assist on and off still nothing.. How frustrating. I called apple, the technican had know idea and we to his supervisor, had to wait fro 40 miuntes and then I hung up..
PLEASE HELP..!

Since yesterday I'm unable to send emails alleging I have exceeded the maximum number of emails per day, but I had only sent out 24 and NO bulk emailing - (much less than 1000 as per the website) and I'm STILL not able to send emails.Any advice?

Since yesterday I'm unable to send emails on any of my Apple devices. The revert is that I have exceeded the maximum number of emails per day, but I had only sent out 24 with no bulk emailing - (much less than 1000 recipients as per the website) and I'm STILL not able to send emails. Any advice on how to solve this?

I have asked a moderator to provide assistance, they will post an invite on this thread.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Query for log Parser to get number of hits in a day or week for particular web applications or site collection

Hi All,
Want to get the number of hits in a day for a web application with IIS logs. so need to know Query for log Parser to get number hits in a day or week for particular web applications or site collection. Kindly help
Regards,
Naveen

I'm trying to get this from WSS 3.0, Hence using the Log Parser

A computerized calling service has been calling my cel all day about acquiring a car loan. They use a different A/C and phone number for each call. Where do I report this harassment?

How do I block harassment from one nuisance computerized advertising company?

Dealing with harrassment can be frustrating, DickA! I can help you stop these calls. Just go to My Verizon, and use the "block calls & messages" feature to block this number for free for 90 days! http://bit.ly/xB4iTc
Thanks,
MichelleH_VZW
Follow us on Twitter @VZWSupport

SCCM 2012 client agent migration - number of machine per day

Hi,
Need some help here as I working out client migration plan. Try to search around but no luck. Any recommendation number of clients can be migrate per day assuming network speed not a concern? I do have 3 primary site
servers connected to CAS. What are factor need to consider?
Regards,
ytlaw

These guys did 9000 PC's and 450 servers in one night. LOL.
http://myitforum.com/myitforumwp/2012/08/06/sccm-task-sequence-blew-up-australias-commbank/
I've heard other stories where someone did like 40,000 in one night. Of course that too was not intentional.
John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

Get avg prices per day, in Excel, when each day has a different number of prices

There is an average formula 'average' that will do just this
Do you have an example spreadsheet?

I have a CSV file that has dates and prices for a stock.
The stock is not traded every day (so dates are not contiguous). Each day may have only one price, or it may have several prices for the day (one price per trade).
I need to find the avg price per day for the stock for each day.
Is there a formula that I could use in Excel 2013 to get the avg price per day, considering this data set?
This topic first appeared in the Spiceworks Community

How many mails i can send at a time per day using APEX mail system?

HI,
I am working on application, when i have written a process to send mail, i have a project where i have to send mail at a time for all the email id's
given list there are upto 5000 email id's where text body also include certain set of data from a report. thinking at a time 3000 its difficult i divided
it region wise, but still each region have 2000 odd email id's. during testing when i run the process just 950 mails i could send then i got a error
saying "ORA-20001: You have exceeded the maximum number of email messages per workspace. Please contact your administrator." so please
can any one help me to know How many mails i can send at a time per day using APEX mail system?
Thanks in advance
Gowthami

Hi jfosteroracle,
You are getting the error may be the following reason,
Check the following,
Login as ADMIN and Goto -->Manage Instance-->Instance Settings--> Mail-->Maximum Emails per workspace
Actually this number denotes the Number of mails can be sent per 24 hour for the workspace,It may exceeded.
It may be the reason.
Thank you.
Regards,
Gurujothi
Edited by: Gurujothi on Jun 27, 2012 5:54 AM

Home Fusion disconnecting dozens of times per day. Is there a fix?

As of a approximately a month ago, my Home Fusion systems disconnects dozens of times per day. I'm not exaggerating! I have logs to prove it. There's a 50-50 chance it will reconnect on it's own after a few minutes. Then again there's also a 50-50 chance it will not reconnect, at which point I have to (pick one):
     a) reboot the cantenna from the router pages;
     b) unplug the cantenna and plug it back in;
     c) unplug the cantenna and the router, wait 30 seconds, plug in the cantenna, wait 30 seconds, plug in the router. (This was recommended by tech support on the phone as the best way to get back the connection);
      d) reset the cantenna to the factory settings;
     e) reset the router to the factory settings.
None of these makes any difference. I have to do one of the above at least 12 times a day. There are many more times when it disconnects, then reconnects on it's own. The system will usually reconnect after 5 minutes, sometimes not. I've had multiple phone calls to tech support, only to hear the same thing, do one of the above. A few times a day the system will reconnect after doing one of the above, only to disconnect again after 3-5 minutes. It is bad all hours of the day, but worst in the late afternoons, evenings, and night.   This is absolutely horrid.
It's not my computers either. The 'diagnostics' for the router and cantenna (which allow you to ping addresses) fail as well when the system isn't working.
My wife and I both work from home, both engineers. I need a stable connection to work. My kids have online homework (worksheets, drills, etc) most nights. How do you deal with a elementary schooler in tears because he can't finish his homework because the connection goes down three times in a half hour while he's trying to get a target math drill score?
One support tech told me a fix would be coming out by the end of February, or early March. That's weeks away! Very stressful. Another told me there was a firmware fix, but it's being rolled out incrementally. Can't Verizon get that to those who are affected most? Can we roll back to an earlier version of the cantenna firmware that was stable? I was told no.

I have the same problem. My Home Fusion set up works great sometimes and then other times, nothing. I can usually reboot the cantenna and router (usually have to do a few times) to get everything working. Usually have to do this 2-3 times a week (sometimes more.)
My Method:
1. Sign into router (192.168.1.1)
2. Go to the Advanced tab
3. Reboot the cantenna (HBA)
4. Wait 1 minute
5. Reboot the router (HBR)
6. Take a walk, fingers crossed
7. Test to see if system working
8. If not working, repeat these steps (may take 3-4 tries!)
Good luck and let me know if this works for you!

In Lookout, how can I make the equivalent of a "4 changes per day" set-back thermostat?

Ok... I need some help here....
I have a Pot_TSP (Temperature setpoint) that uses a PLC register as its remote source. I added a night-time temperature setback feature by adding a "DAYTIME" expression as a permissive, and tying two new Pots (Pot_SP1 and Pot_SP2) to Pot_TSP's "reset value" : NIF(Expression_Daytime, Pot_SP1, Pot_SP2).
Client now wants this increased to 4 optional temp changes per day, just like a household 7-day programmable T-stat. Adding the additional conditions to the "reset" parameter was easy; one extra TimeOfDay timer for each temperature Setpoint change, arranged as "OR" functions. Each time the clock hits one of these TOD targets, Pot_TSP gets "reset" and the "reset value" gets written to it. Here's where I start to bog down... How do you arrange this so that when one of the 4 TOD targets goes "true", its corresponding SP value gets written to Pot_TSP? The closest I've been able to get is this: make a new Pot (Pot_X) with a min of 1 and a max of 4 and use a NCHOOSE to select which of the 4 Temp setpoint Pots Pot_X will use as the (next) SP. If I rotate Pot_X and the clock hits a TOD target, a value corresponding to the selected Pot gets written to Pot_TSP.
So can someone please tell me how to get Pot_X to align itself with the TOD events? I can get a limping model if I slave the NCHOOSE function to a Counter object, but if the customer has Lookout turned off or disconnected long enough to miss one of the events, Pot_X will go out of sync. Same goes for incrementing the Pot object. Can't allow that...
Since the clock never stops and only hits each TOD once every 24 hours, there would never be more than one of the 4 TOD conditions true at one time... is there a way to build an expression object (or the like) to ultimately produce a numeric (the Pot_TSP value) using the following logic: If TOD1 is true, return Pot_SP_1; If TOD2 is true, return Pot_SP_2, If TOD3 is true, return Pot_SP_3; If TOD4 is true, return Pot_SP_4 ????
Thanks guys.
G

Hi Ryan
Thanks again for your input! I'm more comfortable with the DataTable object (now that it's become more familiar), and thanks to you I now have a DataTable constructed for one zone (7 rows for the days-of-the-week, and 16 columns for the variables). Displaying of the cell data, cursor navigation, and reading/writing to the Pots' remote position source (in other words the actual GUI) work just fine. In order to expedite completion of the project for which this DataTable is intended, I am at a point where I am prepared to clone the DataTable 3 times to get 4 zones (that's one panel), then clone that result times the number of panels the site has....but I'd like to run this by you first:
Unless it's contrary to "best practices", should I do as above, or try to further multiplex the DataTable I already have by adding to it the other three zones? The Table I have now serves one zone; can it be expanded to serve (dare I suggest it) one panel (4 zones)? If you recall, I started out thinking I'd need one dedicated Pot for each variable in each zone (16) times 7 days = 96; using the DataTable, the cursor replaced the d-o-t-w so the number of Pots needed dropped to 16. My point: if I have to make separate DataTable objects for each zone, I also need to make 48 more Pots to serve them (which I'm obviously trying to avoid). Then I have to repeat this times the number of panels on site. I'm guessing that adding 3 more zones to the existing (one zone) DataTable is no problem since there's plenty of room left...
But would you add them as columns (to keep the cursor consistent across the zones) or add them as rows (to keep the columns consistent across the zones)?
If added as columns, can I avoid making those extra 48 Pots? Can I make my existing 16 Pots read/write to multiple columns, like change the Remote Source for Pot_Temp_SP_1 from "..\DataTable.B" to something like "nchoose(Pot_Zone_Selector,..\DataTable.B,..\DataTable.R)" where columns B and R contain Temperature setpoint values for Zones 1 and 2 respectively?
If added as rows, I'm guessing I don't have to make those extra 48 Pots. But what's the best way to deal with the cursor? Should I be looking at multiple cursors (one for each zone)?
I should also point out I've been using only L3 Pots since "normal" Pots won't accept an expression as a remote position source; if I change this to regular Pots coupled with SymbolicLinks, does it change the picture at all?
...and I'm using Ver 6.0.2
Thanks,
George

ORA-20001: Maximum number of email messages per workspace exceeded

Greetings. We are running APEX 4.1.1. I have an application where we have to send out email messages to a list of emails. Currently there are 2469 email addresses. Originally we put the email addresses in the BCC but we received an error that we had exceeded the size limit of the BCC. So we modified our procedure to send one email at a time, in a loop.
Now we are receiving the following error message:
"ORA-20001: You have exceeded the maximum number of email messages per workspace"
Has anyone else run into this issue? What is maximum number or email messages per workspace? Is it a limit per day, per session?
We have not added emails to this table since last year, so the maximum number of email messages allowed may have changed recently?
I did find this Forum post that addressed the issue but no one responded:
How many mails i can send at a time per day using APEX mail system?
Thanks,
John

Hi jfosteroracle,
You are getting the error may be the following reason,
Check the following,
Login as ADMIN and Goto -->Manage Instance-->Instance Settings--> Mail-->Maximum Emails per workspace
Actually this number denotes the Number of mails can be sent per 24 hour for the workspace,It may exceeded.
It may be the reason.
Thank you.
Regards,
Gurujothi
Edited by: Gurujothi on Jun 27, 2012 5:54 AM

OS X freezes few times per day

Hello. I've a problem with my Macbook Pro Retina 15". Few times per day system freeze. After freeze and manual reboot (power button) sometimes system have a problem with boot (i need turn on and off few times). Now i check in logs when i open Diablo 3 and have something like this:
24.07.2014 17:56:59,158 WindowServer[135]: CGXMuxCapture: Starting
24.07.2014 17:56:59,158 WindowServer[135]: CGXMuxCapture: Acquired
24.07.2014 17:56:59,159 WindowServer[135]: Display 0x4280642 captured by conn 0x1cc8f
24.07.2014 17:56:59,202 Diablo III[28354]: *** WARNING: Method convertPointFromBase: in class NSView is deprecated on 10.7 and later. It should not be used in new applications.
24.07.2014 17:56:59,394 Diablo III[28354]: *** WARNING: Method convertRectToBase: in class NSView is deprecated on 10.7 and later. It should not be used in new applications.
24.07.2014 17:57:31,000 kernel[0]: NVDA(OpenGL): Channel exception! Exception type = 0x8 DMA Engine Error (FIFO Error 8)
24.07.2014 17:57:31,000 kernel[0]: 4443564e 00000118 88c93bc5 01f794e7 00000001 00000014 d3793533 46d3a4a6
24.07.2014 17:57:31,000 kernel[0]: 4614f297 e71edccf 00088301 000000e1 12f2500a 081d0a4d 1002a0ad 20001801
24.07.2014 17:57:31,000 kernel[0]: 30002800 02803800 0c828040 00500048 00601258 01080d22 808e8010 81042202
24.07.2014 17:57:31,000 kernel[0]: 22188093 1001080d 02808a84 9c820422 0e2268b4 84100108 22028180 80a6b805
24.07.2014 17:57:31,000 kernel[0]: 030a0880 0a00149a 1f138222 41100008 81200218 9b862808 5000480c 60015802
24.07.2014 17:57:31,000 kernel[0]: 78007064 01019000 0a000198 00138a03 13923d0a 24380a3a 0e000000 01000000
24.07.2014 17:57:31,000 kernel[0]: 490000e0 0100000f 49000000 0000000b 47000000 ff000304 ff000000 ff000000
24.07.2014 17:57:31,000 kernel[0]: ff000000 ff000000 ff000000 0a000000 1d13c220 00100008 e480a818 12200bf7
24.07.2014 17:57:31,000 kernel[0]: 03300828 a7a6a038 0dd7b0b6 48028040 00000000 4443564e
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to start of command buffer processing!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,000 kernel[0]: NVDA: Unable to make context resident prior to adding drawable to channel!
24.07.2014 17:57:31,000 kernel[0]: NVDA: Calling glrKillClient for task 0xffffff8044c190c0
24.07.2014 17:57:31,835 WindowServer[135]: CGXMuxCapture: Released
24.07.2014 17:57:31,835 WindowServer[135]: Display 0x4280642 released by conn 0x1cc8f
24.07.2014 17:58:18,000 bootlog[0]: BOOT_TIME 1406217498 0

The logic board is defective and must be replaced under warranty.

Sales Analysis PER DAY SALE

Hello Experts,
In Sales Analysis Report, I want to see the Per Day Sales and the Quantity. I checked it through Item wise, but actually in this Tab (Item), in Quantity Column system only shows open Quantity.
If a DO has been invoiced that Quantity will become Zero.
How do I see the Total sales quantity WISE ?
Thanks & Regards

There are two XL Reporter Reports called "Sales Register" and "Daily Stock Account".
These are under Indian Legal Reports and made specially for Indian Localization Format.
I think these reports can solve your requirement.

Number of collect calls per day

Similar Messages

Maybe you are looking for