Number of New/Blocked Vendors

Hi All,
I need to do a query where i have to show just the number of new vendors and the number of blocked vendors whithin a certain period selected in the selection screen.
A vendor is considered as new if it has a creation date betwwen the dates selected on the selection criteria; a vendor is blocked if it as a blocked date between the dates in the selection criteria.
The creation date and block date are informed in the vendor master data infoobject.
Does anyone knows how to do this counters at query? To ssummarize , i need to count the number of vendors that have creation date and blocked date between the dates entered in the selection criteria.
Any hint would be welcome.
Thanks in advance.
Nuno

Hi Sam,
I tried your suggestion, but i cannot execute the query without a KF. Then i tried to add a counter i have previous added to Vendor master data, but it doesn't work too...!
What i have made now was to add a counter always populated with 1 in the update rules of 0Vendor. In the query i made 2 Restricted KF's, for new and blocked vendors. The 1st with the counter KF and the creation date restricted to the dates in the selection screen and the 2nd with the counter and the blocked date restricted by the dayes in the selection criteria ( via user-exit).
The counter of new vendors works well but for blocked vendors not!!
What do you think about this scenario? I don't know what i'm missing,,,!
Thanks for your help,
Nuno

Similar Messages

Abt blocked Vendor!

Hi,
How will find out which user has blocked vendor master record of any vendor?
Regards
Ashish K

Hello,
Check in XK05 transaction.
Enter vendor, company code and pur. org.
on the output screen you can see the tick mark agaist one of the follwoing options
All company codes
Selected Co. code
All pur. org.
Selected pur. org.
Now keep the curson the line where the check box is ticked and go to envorment >> Field changes
you will get infomation like
Date Field New Old
11/03/08 Pur. block POrg X
Docubel click on the line it will give you the user detail.
Or check in CDPOS table
Enter vendor name in = OBJECTID
TABNAME = LFA1
filed name = SPERM , SPERR
Get the CHANGENR and enter in CDHDR table
OBJECTID = vendor number
CHANGENR = change number from CDPOS table
USERNAME will be the person who has blocked the vendor master.
Regards,
Shailesh

Error in BDC program for Block vendor in SAP R/3

Hello friends,
I wrote a BDC program to block vendor using FK02.
When I debug the program in <b>No screen</b> mode
the program gives a error 'No batch input data for screen SAPMSSY3 0131.
But the screen name and screen number is not available in the program.
When I execute without debugging in No screen mode, the program works correctly.
When I run in ALL screen mode, the program works correctly and the program does not prompt for SAPMSSY3 0131 screen.
Is there any solution for this problem.

check this
... MODE mode
Effect
The processing mode can take the following values:
'A' Display screen
'E' Display only if an error occurs
'N' Do not display
<b>'P' Do not display; debugging possible</b>
If the MODE addition is omitted, then the processing mode is 'A'.
If a screen is displayed in processing mode 'E' because the system reached the end of the BDC data, the system automatically switches to processing mode 'A'.
If breakpoints are set in a transaction tcod called using the CALL TRANSACTION tcod USING itab variant, these are not actually reached in 'N' mode. The system tries to insert data in the Debugger screen; the call ends with SY-SUBRC = 1001 and the message "Batch input data is not available for screen SAPMSSY3 0131" (S 00 344).
Conversely, in 'P' mode, transaction screens are processed in the background (as in 'N' mode) and debugging is possible.
Regards
Prabhu

PAN number for one time vendor

Hi,
At the time of transaction against one time vendor with deduction of tds at the time of document saving
system are giving error "PAN number not available'"
Can any body infm me where we should update the PAN number for one time vendor as if we update the PAN number in one time venodr cin tab then for every one time vendor system is showing the same number ,
So pl suggest where we should maintain PAN number of one time vendor
I am in ECC6
Regards
Vijay

Hi,
In the Creation of Vendor master data, CIN Tab shows onthe menu bar ther you will assign the PAN number .
If the TAB is not shown , assigned in the t code OMT3E select user screen reference and select New Entries and maintain the user and the counry.
May I hope this will helpfull
Regards,
Kanike

Purchase order is creating even for blocked vendors

Dear Friends,
FI guys have blocked the vendor for some reason.
But when we select the blocked vendor in PO creation screen (ME21n), it allows us to create the PO without showing any error message. Based on that, even it is allowing to create service entry sheet/GRN document number. Only during MIR7/MIRO invoice entering stage, it is showing the error message.
Could you please let me know how to resolve this issue at the PO creation stage itself - any sap note number/workaround procedure/providing any error message etc.,
Regards,
Dwarak.

FI team might have blocked at company code level.
However it will allow you to make PO's but you cant make the payment against that vendor.
If you block it at PORG level you ll not be able to do the Po's anymore.

Mail to be trigger for blocked vendors during F110 execution

Hi Experts,
We have blocked the vendors as per our requirement and while executing F110(4.6C version),it is ensuring that no payment is made to the respective vendors.Even we are able to see the blocked vendors in Exception log.
But as per my requirement there should be email to be trigerred picking up all the blocked vendors while executing the payment run F110.
We have created one variant to the program called "ZRFFOUS_C" by copying the "RFFOUS_C",and configured to one payment method called "I" at FBZP(country code level).
Details for variant are Company Code,Payment Method(A to Z),House Bank,Account ID,Check lot.
In that program at GET REGUH i am collecting all the vendor which comes for payment and seperating the blocked vendor in one table and trying to send mail
Now the mail is not triggered properly..
is it becoz we have done it a wrong way or some configurations needs to be done
we have tried sending email from SAP directly it is working fine
and more over we need to send the mail irrespective of bank account,lot number , account id considering we are about to create each and each variant for it. we have about 12 to 13 bank account so creating 12 programs will occupy lots of bytes is there any way to avoid this
please throw light on this
with regards
s.janagar

it is due to some configuration and not becoz of coding

Error in new block structure

Hi all,
For the Bulk storage type which is maintained for SUT active I have defined new Block Structure.
**Increased the SU 15 to 25.
But system giving Error while creating TO by LT06.
Error
"Storage unit type T01 not compatible with current block definition."
Message no. L3425
Diagnosis
The storage unit type of the first storage unit to be put away determines how many storage units can be put away in one storage bin. If a storage unit with a different storage unit type is put away in this storage bin and the maximum number of storage units per block is the same as the first unit, then the system allows this.
In this case, the storage unit type of the storage unit to be put away is not the same as the storage unit type of the existing storage unit. Therefore, the definition of the maximum number of storage units per block is different.
Procedure
Put this storage unit away in a different storage bin.
*the error comes even after defining the new st bin
Edited by: dev .. on Aug 7, 2008 2:27 PM

hi
See the hierachy version or hierachy levels in both sides.
Are they in same version and trying to upload data for the correct level
Hope this helps
Regards
Ganesh N

Installed an SSD in place of hard drive, DU reports that there is an invalid number of allocation blocks.

I recently installed a Mercury Extreme Pro SSD in my laptop in place of the hard drive. I used Carbon Copy Cloner to make the SSD a bootable disk and transfer all my files. Today (about a month later) while checking the old HD (now in an external case), I decided to run "Verify Disk" on the new SSD. When I run it on the disk volume, Disk Utility reports that there is an invalid number of allocation blocks - much to my surprise. When I run it on the drive itself there are no errors.
The new disk works fine as the startup drive. What's the meaning of the error and how do I fix it?

No, on both counts. FW800 will not support the speed of SSDs. It barely supports the speed of very fast hard drives. But it beats USB 2.0.

How to block vendor invoices when GR is made to stock type 2?

Hi,
I would like to get your advices on the following case:
- I need to be able to block vendor EDI invoices from payment when GR is made with 101 to stock type "2", Quality inspection. Manual blocking is not the case here but SAP should block invoices automatically in these cases. Is there any user exit available for this? Invoice blocking should be made also in the case when initial GR is made with 107 (in this case invoice is blocked by standard) and material is then released from valuated GR blocked stock with 109 to stock type "2", Quality inspection. In standard system vendor invoice is now unblocked but my customer needs to have an invoice still blocked as material is in quality inspection stock type.
Please advice.
Br,
Tapio

Hi,
Refer this post
http://forums.sdn.sap.com/thread.jspa?threadID=1488428
You will get the idea

How do I reduce the number of news links in Latest Headlines

How do I or can I set the number of news links shown in Latest Headlines

* LiveClick: https://addons.mozilla.org/firefox/addon/2499
Hidden pref: extensions.liveclick.maxFeedItems
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page.

How to change number of new messages

Is there a way to change how iCloud shows the number of new messages from including the whole thread of messages?
ie - it shows the number of all old messages in a thread when there's just one new message.

The only way to do so with Tiger Mail is by using the Activity Viewer.
At the Mail.app menu bar, go to Window and select Activity Viewer or use the Apple/Command key - Command/number 0 key.
I've been using the Mail.app exclusively since Jaguar was introduced, thru Panther and now Tiger and I've always preferred keeping the Activity Viewer window open.
I keep the Activity Viewer window at the bottom right just below the bottom of the Mail.app window.

Bad magic number in super-block while trying to open /dev/sda2

hello,
So I've a linux partition, and then I wanted to install a Windows copy. I've only 1 HDD with differents partition into it:
sda5 (swap)
sda6 /user
sda7/var
sda8 / (which contain the boot and root of course)
sda3 /home
sda2 NTFS (windows xp)
So, as I had linux installed before windows, I had to make my sda2 NTFS (87) under my cfdisk. Then, I went to install windows, everything worked fine, windows booted with his boot system, but I had to restore grub with my archlinux live cd:
grub> find /boot/grub/stage1
grub>root (hd0,7)
grub>setup (hd0)
everything worked successfully, my grub loaded till while booting archlinux I got this error:
couldn't find ext2 superblock, trying backup blocks...
e2fsck: Bad magic number in super-block while trying to open /dev/sda2
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
What I tried is to run the e2fsck -b 8193 /dev/sda2 but right after that, I thought about it, this isn't linux partition so of course, the superblock isn't the same as they are ntfs type from widnows?
I've read on some forum but unfortunately didn't solve my problem, if anyone has any suggestion before I format the NTFS partition, I'd really appreciate it.
best regards, maz

what I think it happened, is that after installing windows your partitions numbers got twisted a bit. What you have to do is to edit /etc/fstab, and check out your linux and swap partitions mounting entries, I believe you just have to change the number of /dev/sda[number] coresponding to your linux partition in fstab
If you can't solve it, post the output of
fdisk -l
and
cat /etc/fstab
Last edited by I'mGeorge (2011-07-21 20:53:31)

Show the number of new podcasts with the dock icon

Hi community,
is it possible to show the number of new podcast-episodes in the dock (as like for the Mail.app
Otherwise this could be suggestion for a nice new feature in iTunes 8.x or 9.0
greetings,
Mario

Click here and fill out the form.
(35947)

A workflow for a new MM vendor invoice showing the error.

We have detected the following strange behaviour in our workflow runtime environment.
A workflow for a new MM vendor invoice is started as it should.When we see the workflow overview it shows status u201CIn Processu201D.
f the workflow shows the status u201CIn Processu201D for an hour or more, a new undesired workflow (same WF-task) is started automatically for the same invoice. Nobody has triggered this new undesired workflow.
Please let us know the what is the problem
Thanks
Sarin23

Hi,
Please see the below link and this will help you.
http://help.sap.com/printdocu/core/print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/saphelp_46c/helpdata/EN/c5/e4a930453d11d189430000e829fbbd/content.htm
Anil

Blocked vendor master (Ordering address) not considered in PO

Hi Team,
Recently we have upgraded our system to ECC6 from 4.6. After upgrade,
the system is not considering the vendor master (Ordering Address) during
Purchase Order creation if it is blocked at purchase org level under
alternate data. Whereas it was picking in 4.6 system.
Kindly provide the reason for such behavior and provide the solution if
at all we want those blocked vendor codes to be considered.
Thanks.

Hi,
Please try below SAP note for the same
Note 1609717 - Vendors with blocked purch orgs are not replicated correctly
Note 1607331 - Unassign a vendor from its Organizational unit
Regards,
Sandesh Sawant

Number of New/Blocked Vendors

Similar Messages

Maybe you are looking for