Number of rows inside a cell in table

Hie all,
I have a requirement in that I have to create the number of rows inside the cell of table. I did it using the subforms as a body page of a row.
but facing problems when you have number of rows such as data truncation and overlapping of rows..
Please help.

Hi,
You can also create table inside the cell of the column by following steps:
1.Select the Cell of the Column in table.
2.Go to Table -->Insert-->and choose as per your requirement(You can adjust the row ans column as per your requirement).
3. Go to Pallette-->Border and hide the border if not required.
This is will not create problem of overlapping or truncation.
Regards,
Shweta

Similar Messages

Number of rows in all of your tables.

Hello,
If I want to discover the number of rows in all of my tables (e.g. I own 20 tables and each table has 50 rows), why is the following code not providing the answer:
SELECT count(*)
FROM (SELECT table_name
FROM all_tables
WHERE owner = 'SHIRISH');
Thanks in advance,
Shirish

Yes, EXTEND, FIRST and LAST are related to using collections. Actually, I think you're wrong about using 0 to indx. Looking at his code, I believe that would need to be 1 to indx. Which of course, demonstrates the reason to use FIRST and LAST. That way you don't have to make assumptions about the index range. I wouldn't have kept the index separately. I would have use the COUNT attribute when adding elements to the collection. Actually, I probably wouldn't have used the extra collection at all given what that code does ...
declare
    type ttab_table_name is table of user_tables.table_name%type;
    tab_table_name ttab_table_name;
    vint_cnt integer;
begin
    select table_name
    bulk collect into tab_table_name
    from user_tables;
    for i in tab_table_name.first .. tab_table_name.last loop
        execute immediate 'SELECT COUNT (*) FROM '
            || tab_table_name(i) into vint_cnt;
        dbms_output.put_line(rpad(tab_table_name(i), 35, ' ')
            || '- ' || to_char(vint_cnt, '999,999,999'));
    end loop;
end;
/

Row strokes in cell type tables

The problem is the following:
when I select the whole table and go to strokes and fills to put a stroke at the bottom of ALL rows, I select the bottom rule of the "matrix" in the center of the window and put 0.3 points. What that does is put a stroke at the bottom of the whole table, i.e. just the last row, and the other rows are unaffected.
How do I do this in one step for the whole table?

Oh yes, the proxy changes, didn't really notice that!
Valuable info!
Thank you.
Is this how I should call the "matrix" (couldn't find another word) from now on, proxy?
Is this official Adobe lingo?

Count number of rows in a table

Hi,
I have a requirement. I want to frame a SQL, which takes schema name as input and returns tables owned by that schema and number of rows inside a particular table.
A Sample output:
===========
Table            No. of Rows
~~~~          ~~~~~~~~
A                    123
B                    126
C                    234
.Can somebody help me in framing a query for the same.
Regards,

hoek wrote:
But you could use this script:
http://laurentschneider.com/wordpress/2007/04/how-do-i-store-the-counts-of-all-tables.html
Laurent's solution most likely was published before IOT. Anyway, IOT ovwerflow tables must be excluded. Otherwise:
SQL> select table_name,
2          to_number(
3                    extractvalue(
4                                 xmltype(
5                                         dbms_xmlgen.getxml('select count(*) c from '||owner || '.' || table_name)),'/ROWSET/ROW/C')) cou
6    from dba_tables
7    where owner = 'OE'
8 /
ERROR:
ORA-19202: Error occurred in XML processing
ORA-25191: cannot reference overflow table of an index-organized table
ORA-06512: at "SYS.DBMS_XMLGEN", line 176
ORA-06512: at line 1
no rows selected
SQL> select table_name,
2          to_number(
3                    extractvalue(
4                                 xmltype(
5                                         dbms_xmlgen.getxml('select count(*) c from '||owner || '.' || table_name)),'/ROWSET/ROW/C')) count
6    from dba_tables
7    where owner = 'OE'
8      and nvl(iot_type,'X') != 'IOT_OVERFLOW'
9 /
TABLE_NAME                          COUNT
CUSTOMERS                             319
WAREHOUSES                              9
ORDER_ITEMS                           665
ORDERS                                105
INVENTORIES                          1112
PRODUCT_INFORMATION                   288
PRODUCT_DESCRIPTIONS                 8640
PROMOTIONS                              2
PRODUCT_REF_LIST_NESTEDTAB            288
SUBCATEGORY_REF_LIST_NESTEDTAB         21
10 rows selected.
SQL> SY.

How to make a control table with the same number of rows of its itab

I'm creating a control table, but it always have the maximum number of lines possible.
How can I make it so that it has only the same number of rows of it's internal table?

solved partialy with this:
MODULE locka_lin OUTPUT.
DATA: lin TYPE i.
DESCRIBE TABLE t_obj LINES lin.
table_con-lines = lin.
ENDMODULE. " OUTPUT
but it still doent work when lin = 0
any simple way to solve it on that case?
Edited by: RagnaRock on May 5, 2010 6:00 PM

How to control the number of rows selected from a sybase database table?

Hi, JDBC guru,
I'm working on project using Sybase 11.9.x database.We need to process a record in a table,first select it from the table,then do some computing,finally write it to a dbf file, if the above steps succeed,remove the original row in the table.Quite evidently, all these operation should be put into one transaction. But how can I select just a number of rows from the sybase database table?
Any hints?
Thank you in advance.
Regards,
Jusitne

Statement stmt...
stmt.setMaxRows(20);

Can we find the number of rows in table from the dump file

Hi All,
Can we find the number of rows in table from the dump file with out importing the table in to the database?
Please let me know ,if any option is there.
Thanks,
Kumar.

<s>Try to import with option SHOW=Y, that should skip the number of rows which are into a table from a dump file.</s> 
 
Nicolas. 
Oops, sorry, that doesn't show the number of lines... 
Message was edited by: 
N. Gasparotto

More Table Blocks in 11g with same number of rows as in 9i

I was using SQL performance analyzer to compare performance difference between 9i and 11g databases.
For this purpose I generated a trace file in 9i database and used it to build STS in 11g database.
After runing two trials and comparison the report showed performance regression (comparing "buffer gets") while using following SQL statement
*"SELECT * FROM EMP";*
There were total 14 rows in emp table in both databases( i.e 9i and 11g)
There was no plan change for above SQL statement in 11g database but still there was performance regression in 11g.
After querying dba_tables view for number of blocks in emp table on both sides i found that EMP table in 9i database had 1 block where as in 11g emp table had 5 blocks (Even after using alter table emp move;)
I am unable to understand why emp table has more number of blocks in 11g with same number of rows as in 9i emp table?

user8916506 wrote:
Below query was executed in 9i database.
SQL> select extent_management,initial_extent,allocation_type from dba_tablespaces where tablespace_name='SYSTEM';
EXTENT_MAN INITIAL_EXTENT ALLOCATIO
LOCAL 65536 SYSTEM
Results shows that SYSTEM tablespace in 9i database is locally managed.
Where as results of below query from 11g database is indicating that users tablespace in 11g is also locally managed.
SQL> select extent_management,initial_extent,allocation_type from dba_tablespaces where tablespace_name='USERS';
EXTENT_MAN INITIAL_EXTENT ALLOCATIO
LOCAL 65536 SYSTEMGood to see that you also picked up the allocation_type at the same time.
So you have shown that the discrepancy between 9i and 11g isn't down to the difference in extent management.
Are there any other differences between the tablespaces when you compare 9i system with non-system, and 9i system with 11g non-system ? (Hint - we have an anomaly with space allocation.)
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
Author: Oracle Core

Setting number of rows and columns

How do I set the number of rows and columns of a table, say 2348 rows by 3 columns?
Then how do I quickly select the last row?
Also, if I enter a formula in row 1 column 2, how do I quickly copy that formula down to row 1435, or to the end of the column? Dragging seems slow and awkward.

I wish to add a few words to Jerrold responce.
gjf12 wrote:
How do I set the number of rows and columns of a table, say 2348 rows by 3 columns?
Then how do I quickly select the last row?
Also, if I enter a formula in row 1 column 2, how do I quickly copy that formula down to row 1435, or to the end of the column? Dragging seems slow and awkward.
The process that you describe is inefficient.
The efficient one is :
create a table
enter the formulas in a single row
delete the rows below.
Now, each newly inserted row will contain the formulas.
From my point of view, it's when this is done that it will be interesting to apply a script adding rows.
Here is a script inserting rows.
--[SCRIPT insertRows]
Enregistrer le script en tant que Script : insertRows.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule au-dessous de laquelle vous voulez insérer des lignes.
menu Scripts > Numbers > insertRows
Le script vous demande le nombre de lignes désiré puit insère celles-ci.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
--=====
Save the script as a Script: insertRows.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell below which you want to insert rows.
menu Scripts > Numbers > insertRows
The script ask you the number of rows to insert then it does the required insertion.
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
Save this script as a … Script in the "Folder Actions Scripts" folder
<startupVolume>:Library:Scripts:Folder Action Scripts:
--=====
Yvan KOENIG (VALLAURIS, France)
2010/01/13
--=====
on run
set defaultValue to 100
if my parleAnglais() then
set myInteger to my askAnumber("Insert how many rows ?", defaultValue, "i")
else
set myInteger to my askAnumber("Combien de lignes voulez-vous insérer ?", defaultValue, "i")
end if
set {dName, sName, tName, rname, rowNum1, colNum1, rowNum2, colNum2} to my getSelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
repeat myInteger times
add row below row rowNum2
end repeat
end tell
end run
--=====
on getSelParams()
local r_Name, t_Name, s_Name, d_Name, col_Num1, row_Num1, col_Num2, row_Num2
set {d_Name, s_Name, t_Name, r_Name} to my getSelection()
if r_Name is missing value then
if my parleAnglais() then
error "No selected cells"
else
error "Il n'y a pas de cellule sélectionnée !"
end if
end if
set two_Names to my decoupe(r_Name, ":")
set {row_Num1, col_Num1} to my decipher(item 1 of two_Names, d_Name, s_Name, t_Name)
if item 2 of two_Names = item 1 of two_Names then
set {row_Num2, col_Num2} to {row_Num1, col_Num1}
else
set {row_Num2, col_Num2} to my decipher(item 2 of two_Names, d_Name, s_Name, t_Name)
end if
return {d_Name, s_Name, t_Name, r_Name, row_Num1, col_Num1, row_Num2, col_Num2}
end getSelParams
--=====
set {rowNumber, columnNumber} to my decipher(cellRef,docName,sheetName,tableName)
apply to named row or named column !
on decipher(n, d, s, t)
tell application "Numbers" to tell document d to tell sheet s to tell table t to return {address of row of cell n, address of column of cell n}
end decipher
--=====
set { d_Name, s_Name, t_Name, r_Name} to my getSelection()
on getSelection()
local _, theRange, theTable, theSheet, theDoc, errMsg, errNum
tell application "Numbers" to tell document 1
repeat with i from 1 to the count of sheets
tell sheet i
set x to the count of tables
if x > 0 then
repeat with y from 1 to x
try
(selection range of table y) as text
on error errMsg number errNum
set {_, theRange, _, theTable, _, theSheet, _, theDoc} to my decoupe(errMsg, quote)
return {theDoc, theSheet, theTable, theRange}
end try
end repeat -- y
end if -- x>0
end tell -- sheet
end repeat -- i
end tell -- document
return {missing value, missing value, missing value, missing value}
end getSelection
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to ""
return l
end decoupe
--=====
Asks for an entry and checks that it is an floating number
set myInteger to my askAnumber(Prompt, DefaultValue, "i")
set myFloating to my askAnumber(Prompt, DefaultValue, "f")
on askAnumber(lPrompt, lDefault, ForI)
local lPrompt, lDefault, n
tell application (path to frontmost application as string)
if ForI is "f" then
set n to text returned of (display dialog lPrompt & " (" & (1.2 as text) & ")" default answer lDefault as text)
try
set n to n as number (* try to convert the value as an number *)
return n
on error
if my parleAnglais() then
display alert "The value needs to be a floating number." & return & "Please try again."
else
display alert "La valeur saisie doit être un nombre décimal." & return & "Veuillez recommencer."
end if
end try
else
set n to text returned of (display dialog lPrompt default answer lDefault as text)
try
set n to n as integer (* try to convert the value as an integer *)
return n
on error
if my parleAnglais() then
display alert "The value needs to be an integer." & return & "Please try again."
else
display alert "La valeur saisie doit être un nombre entier." & return & "Veuillez recommencer."
end if
end try -- 1st attempt
end if -- ForI…
end tell -- application
Here if the first entry was not of the wanted class
second attempt *)
tell application (path to frontmost application as string)
if ForI is "f" then
set n to text returned of (display dialog lPrompt & " (" & (1.2 as text) & ")" default answer lDefault as text)
try
set n to n as number (* try to convert the value as an number *)
return n
on error
end try
else
set n to text returned of (display dialog lPrompt default answer lDefault as text)
try
set n to n as integer (* try to convert the value as an integer *)
return n
on error
end try -- 1st attempt
end if -- ForI…
end tell -- application
if my parleAnglais() then
error "The value you entered was not numerical !" & return & "Goodbye !"
else
error "La valeur saisie n’est pas numérique !" & return & "Au revoir !"
end if
end askAnumber
--=====
on parleAnglais()
local z
try
tell application "Numbers" to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
Yvan KOENIG (VALLAURIS, France) mercredi 13 janvier 2010 12:43:34

Number of rows in DB

To know the number of rows in a table, count(*) is used.
It is fast to get the result if you directly type the command into MYSQL, but not in servlet.
The codes I often used look like this way:
ResultSet resultSet =
stmt1.executeQuery("SELECT COUNT(*) FROM CONTENT");
resultSet.next();
rowcount = resultSet.getInt(1);
Please tell me if there is a better and faster way to get the same result as what the codes do above!
Please help if you could!

To know the number of rows in a table, count(*) is
used.
It is fast to get the result if you directly typethe
command into MYSQL, but not in servlet.It will do it just as fast as MYSQL did it. If you're
seeing a lag time it's more likely because of other
code, such as establishing the JDBC connection as
well. Are you using connection pools like you should?In the company i work for I once red an artical saying the using
count(1) // or any literal in this case
instead of count(*) is faster.
becouse when you call count with column names or * in it the dbms fetch the values of actual column and count that row only if any of those columns has a not null value but if you are calling count(1) it does not fetch any column values just keep counting rows.
But you do not notice any different unless you got large number of rows and columns in the table.

How display number of row in select statement

How can I display number of row in select statement?
Table
data1 data2
xxx ccd
wss qwe
qws uij
I need get from SELECT statement:
1 xxx ccd
2 wss qwe
3 qws uij

user13734495 wrote:
Thank you from answer.
Statement
select rownum rn, data1, data2 from table
is good.
And what have I do went I use
select rownum rn, data1, data2 from table order by data1
and I get
3 qws uij
2 wss qwe
1 xxx ccd
I need
1 qws uij
2 wss qwe
3 xxx ccdhence the importance of describing the complete problem.
select
rownum,
data1,
data2
from(
select
    data1,
    data2
from
    table
order by
    data1)

Getting the count of rows present in the oracle table

Hi all,
i want to get the total number of rows present in the sql table to the appmodule.
After applying the some view criteria to the view object. if it try with getallrowsinrange it was giving count of rows present in the viewobject but i want total number of rows present in the sql table.
How can i get that
I am using jdev 11.1.1.5
Thanks in advance

I threw something together, quick and dirty, feel free to optimize.
Assuming that you want the table count, I put the code into a EntityDefImpl subclass since this is what represents a table in the middle-tier.
public class EmpDefImpl
      extends EntityDefImpl {
   * This is the default constructor (do not remove).
public EmpDefImpl( ) {}
//~ Methods ****************************************************************************
public long getTableRowCount( DBTransaction transaction ) {
    String query = getQuery( );
    String countQuery = String.format( "SELECT COUNT(*) FROM (%s)", query );
    long count = 0;
    ViewObject vo = transaction.createViewObjectFromQueryStmt( countQuery );
    try {
      vo.executeQuery( );
      Row row = vo.first( );
      Number number = (Number)row.getAttribute( 0 );
      count = number.longValue( );
    } finally {
      vo.remove( );
    return count;
}Depending on your type map, you might not get a oracle.jbo.domain.Number, but something else, so the cast might need correction.
Usage example:
public class EmpEditViewImpl extends ViewObjectImpl {
public EmpEditViewImpl() {
protected void executeQueryForCollection( Object object, Object[] object2, int i ) {
    super.executeQueryForCollection( object, object2, i );
    EmpDefImpl def = ( EmpDefImpl )getEntityDef( 0 );
    long tableRowCount = def.getTableRowCount( getDBTransaction() ) );
    // Do something with it
}As you can see, the code is pretty generic. You might also be able to put this into an ADF extension base class.
Sascha
Edited by: Sascha Herrmann on Jun 7, 2012 2:39 PM

DBMS Gather Stats using ESTIMATE, gives varying number of rows

I am a little intrigued by the gather_table_stats results for number of rows on user_tables.
A table with no maintenance on it, has 242115 rows.
When I gather stats COMPUTE, num_rows from user_tables = 242115.
However, when I ESTIMATE the figure changes, without apparent reason:
10% - 240710
25% - 240564
50% - 242904
99% - 242136
Using ESTAIMTE, I would expect the number of rows that are inspected to change, but not the resulting number of rows on User_tables!
I wonder, why is this?
Thanks

Thank you for that amusing analogy!
However, it would be interesting to know where it
gets this idea from. Why does it decide sometimes
more, sometimes less, what basis?Actually I'm not the person that knows the precise algorithm, I don't know also any links to docs handy that describes how it is done. But one scenario would be to enble trace and check what sql oracle is issuing to gather stats. Of course it won't be all the algorithm, but probably you'll get some insight.
I mean, If I knew I had not removed or added any
socks to the wardrobe or even if I was unsure anyone
else had, I would use the previous count as my
starting point.AFAIK Oracle doesn't have any previous knowledge i.e. to be more precise Oracle doesn't use it. Because you as a person probably know something more how the table was or wasn't changed, but Oracle doesn't know and/or use such information at least for stats gathering.
Gints Plivna
http://www.gplivna.eu

Is it possible to get a row to populate from a table on another page upon searching data entered in a cell?

Hey guys,
Could do with some assistance! I would like to create a document that allows me to enter a code in the first cell and then populate e row from the information contained in a table on a second page. Is it possible to do this with Numbers?

Hi John,
Sorry for the delay.
A VLOOKUP table is a rectangular array of cells, which may be a separate Table (preferred) or a block of cells on a larger Table. The column containing the search-for values (the codes, in your case) must be the leftmost column of the lookup table.
columns-range is the range of columns making up the lookup table. The range starts with the column containing the search-for values, and ends with the last column to the right containing data to be searched.
return-column is the column of the lookup table from which the data is to be returned. It is specified by a number. 1 is the search-for column, 2 the next column to the right, etc.
close-match determines whether the formula will accept a close match to the search term, or will accept only an exact match. A 'close match' is defined as 'the largest value less than or equal to the search-for value.'
For text values, 'less than' is read as 'alphabetically before' the search value.
Here's a small sample table set showing an example:
In practice, the data table (top) would be on a separate Sheet from the smaller Search table, and that sheet's name would be included in the cell range reference shown in the formula (unless the Data table's name, "Data" was used only for this table within the document).
There's a single formula, entered in the selected cell (B2) of the Search table, then filled right and down to all cells below and to the right of B2:
B2: =IFERROR(VLOOKUP($A2,Data :: $A:$F,COLUMN(),FALSE)," - ")
The FALSE value for close-match means only an exact match will be accepted. If no exact match is found, as in row 4 of the search table, VLOOKUP will return an error. The error is trapped by IFERROR, and the text string shown is inserted in the cell. Note that VLOOKUP is not case sensitive.
The COLUMN() function returns the number of the column containing the formula, and provides an automatic means of incrementing the return column as the formula is filled right.
Can't supply any details on how to enter a formula in Numbers for iOS, as I've not done that on an iOS device.
Regards,
Barry

Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)

Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)?
Exemple:
Table1
Cliente name:
John
Client number:
12345
Survay number of negative answers:
3
Table2
Questions and answers that were negative:
Question: How much time where you waiting
Avaluation: 3 (from 1 to 10)
Answer: They only called me 1 mouth later
Can you please help me?

Hi,
Based on the description, I understand that you want to add subreport in the main report. When previewing the main report, the subreport can be shown in detail. Please see the screenshots on my test:
In Reporting Services, we can create parameters and pass them from main report to subreport in order to control the data dynamically.
References:
Subreports (Report Builder and SSRS)
Add a Subreport and Parameters (Report Builder and SSRS)
If I have any misunderstanding, please feel free to contact me.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Number of rows inside a cell in table

Similar Messages

Maybe you are looking for