Number of Seats when inviting multiple users to team

I attempted to invite ~40 users to my team and utilize existing (unused) seats. Instead, more seats were added to my contract. How do I correct this?

Hi,
If you already bought the 40 users,you must only invite them from your admin consol .
If you added a new users to your team subscription ,you must contact your regional customer service to cancel them .
Regards,

Similar Messages

Autologin to an account when using multiple users

Is there a way to have a mac running Mac OS 9 set up with multiple users autologin to one of the accounts?
Ok, since I know people will ask why do you want to do that. I have an old mac and found my old XTension home automation software. I want to make this machine a dedicated home lighting controller. (I have a new mac mini doing this in my house, but I wanted to play with the old machine for fun). Now, I have multiple users set up and one account for home automation that has the panel version of the finder and the only application visible is XTension. This all works great.
If the power goes out, I want the machine to reboot into this home automation account automatically. I also want to have the machine power cycle once a week just to keep from any memory problems etc.

Hi, Mark -
I know of no way that could be set up, since nothing usable runs until an account is logged into.
I assume that you want to retain the ability to switch to a full OS whenever needed; otherwise, the solution would be to turn Multiple Users off, and set the OS up the way you want it for automation purposes.
Two possible solutions allowing the retention of the ability to have a fully-operational OS available -
• Partition the hard drive, then install OS 9 on both (it can be installed on one, then copied via drag-and-drop to get it on the other partition also). Set one up as a fully-functional OS, and the other as a limited-to-automation one. Once you set the startup disk selection to the partition with the automation version, whenever the machine is restarted it will continue to use that one. You can use Startup Disk control panel to switch booting to the other OS when needed. Note - partitioning a drive will erase its entire contents, so you would need to first back up anything you do not want to lose.
• Similar to the preceding, but, provided your machine has the capability to accept a second internal drive, add a hard drive to provide the second volume.
The advantage of the first one is that there is no additional cost. The advantage of the second is that you need not erase the original drive.

HT4539 When having multiple user accounts on a mac can only one of you use the automatic downloads in iTunes?

Why is it that in itunes on a mac, if you have multiple users, that only one apple id can be used for automatic downloads?

See if this helps: iTunes: How to share music between different accounts on a single computer

"user must change password at next logon" flag for multiple users

2008 R2 domain with a couple of 2012 R2 DCs.
john.user is in the Users OU. if I right-click john.user, choose properties, go to the account tab, and check "user must change password at next logon," the next time john.user tries to log in, he gets prompted to change his password. also the
powershell command
get-aduser -filter * -Properties * | ? name -like "*john.user*" | select name,pwdlastset
shows that john.user's pwdlastset is 0. all of this is as expected.
but if I highlight every account in the Users OU, right-click, properties, Account, "user must change password at next logon," it appears that nothing whatsoever happens. john.user doesn't get prompted to change his password at his next
logon, and his pwdlastset is something like 130622757432306111.
is this the expected behavior? why are the Account tab and/or the "change password at next logon" box available to me when selecting multiple users if they aren't meant to work?

ah. thank you sir. *two* checkboxes. *two.* of course.
I had enough OUs under my Users OU that I just used powershell to catch them all at once:
$enabledusers = get-aduser -filter * -SearchBase "ou=users,dc=domain,dc=local" -Properties distinguishedname,pwdlastset |
    where {$_.enabled -eq "true" -and $_.distinguishedname -notlike "*ou=service accounts*"}
foreach($enableduser in $enabledusers) {
    $enableduser.pwdlastset = 0
    Set-ADUser -instance $enableduser

I need to host a Shared PDF on SharePoint. If it is on SharePoint can only one person comment at a time? I know documents have to be checked out when using SharePoint. I need multiple users to be able to comment in real time and see comments in real time.

I need to host a Shared PDF on SharePoint 2010. If it is on SharePoint can only one person comment at a time? I know documents have to be checked out when using SharePoint. I need multiple users to be able to comment in real time and see comments in real time. Is this possible?

try here:
http://www.bbb.org
File a complaint with them. Verizon will call you to fix the blunder.
But remember it is always up to the customer to insure what they are getting and what it costs. Don't trust the word of a sales person who makes their living on getting that sale. Lies, deceit or false promises will be and have been used by sales people for thousands of years.
Good Luck

Multiple users identified when only one on the machine - me

I am experiencing very slow internet communication and when trying to download latest App from Apple the guidance tells me that I need to shut down 'multiple users' when I am the only user shown on our machine. We did suffer a power cut a few days ago when the computer was being used. Would this 'upset' the system into thinking that it is still in use by the 'other user(s)' - is it possible to 'reset' to in effect clear this - I am using TimeMachine.
Normally I get good but not brilliant internet response but since the power cut we do seem to be running very slow - well that's out anaylis so far but any other suggestions as to how to get back to normal would be welcome.
I have run MacKeeper to see if it can find anything untoward.
Rodney

Hi Rodney
Let me address your issues in reverse order.
First, Mackeeper is extremely bad software, and is very often the cause of slow Macs. My recommendation is that you uninstall it immediately, and see if that improves your speed.
http://help.mackeeper.zeobit.com/Manual/GettingStarted/UninstallingMacKeeper.htm l
Next, can you describe what "app" you are downloading from Apple? Is it a software update?
How much hard drive space do you have available? Click cmd-i on your Macintosh HD shortcut and look at the "available" value.
It would be helpful if you could include your version of OS X in your profile. You say "iOS 7" which is iPhone/iPad software, not Mac software.
Matt

Data in the table changes when multiple users try to submit data

I have a dynamic table. The table is created in the wdDoModifyView. The user can load data into the table from an excel file. So I have a "Load" button that loads the data from the selected excel file to the table. I also have a "Submit" button. This "Submit" button converts the data to an xml file and make a call to an oracle stored procedure for validation check. If there's an error it will be returned and displayed to the user. If none, a summary of data for posting will be displayed to the user. If the data is correct and the user hit the ok button, the same data will be return to oracle sp for loading in the table.
The problem we encountered is when multiple users are loading and submitting at the same time, the data displayed in the dynamic tables changes after clicking the ok button. It is as if, the table displays the data being loaded by other user.
This is an error that is difficult to recreate. This doesn't happen all the time. I hope you somebody could enlighten me why this is happening. I'm not sure if it has something to do with multithreading or session.
Edited by: Marlyn Agco on Apr 14, 2009 3:57 PM

Hi Armin,
Did you mean storing view instances in static references and accessing them outside the wdDoModifyView is not a good idea? In wdDoInit the nodes are dynamically created according to the xml file being returned by the database. This node is stored in a static variable which is also used in wdDoModifyView to create the dynamic table.
What do you suggest? We're still encountering same issue when multiple users are uploading data.

One number/account, multiple users answering

Here's what I would like to set up for my business:
- A button on my business website that says "contact us now on Skype"
- Clicking that button activates a call or a chat session to a Skype account for my business
- That call or chat will be answered by whichever of my three colleagues are online at the time
I have searched high and low across the Skype website and forums, but haven't found anything like this. Did I miss it?
I realize I could just link it to one single Skype username, but what happens when that person is offline? It would be great if it could go to a single account that is accessed by multiple users, any of which could pick up the call/chat.

keinkohle wrote:
Thanks for the suggestion! Pretty May looks pretty good.
However, they unfortunately don't support Skype messaging. It would be great if customers could just type a quick message, that could be received then answered by one of three staff members.
Anyone heard of anything that can do that?
I am assuming you are expecting these end-users to send these messages to you via Skype?
While this can be done, it would require that you have a computer somewhere dedicated to be running a Skype client and another 3rd party program at all times.
The 3rd party program is a free program I created that does call transfer automatically, called SCTE ("Skype Call Transfer Example").
Inside the Lower text box named "Or Enter "ONE" Skype name or Phone #, you can actually enter as many Skype names and/or phone numbers as you wish, seperating them by a comma.
Example: SkypeName1,+13125551212,SkypeName2,SkypeName3,+16125551212
NOTE: Any phone numbers must have a leading (+) sign.
By checking the checkbox "Auto Transfer" any inbound call will be attempted to be transfered to ALL of the Skype Names and/or phone numbers listed above. The first one that answers, gets that call.
It's important to define "First One that Answers" by saying, if for example SkypeName2 was offline, but had Skype voicemail activated, then it is possible that the call could end up going to Skype voicemail even when the other Skype names are online or the other phone numbers are ringing if those others don't answer the call quickly. So, that's important to remember.
That said, you can remove phone numbers and Skype names at anytime to avoid any Skype names that are not currently online or any phone numbers where say that office is closed ("Say it's a weekend and nobody will answer the phone or it's a different timezone and that phone won't be answered at this time.").
Many use SCTE for example, for hotlines and on-call methods, as shifts change or offices are closed due to timezone difference, the Skype names and phone numbers are changed and inbound callers are redirected to the current support at that time.
SCTE can even be used by those that answered the call, and they can quickly re-transfer the call to members in custom Skype qroups you can create, or contacts in their contact list because SCTE shows the online status of who is currently available, for example, for questions that maybe the original person who had the call transferred to, can't answer. So they in turn, again transfer the called transferred to them, to someone else.
If the people answering the call are also using SCTE, they can quickly place a call on hold, answer another call, resume a call, end a call and transfer a call again, by simply selecting that call in progress from the SCTE active call window.
SCTE can also be placed in your system startup folder and if the Skype name is set to auto-logon SCTE will start Skype when SCTE starts so that Skype and SCTE are always available as soon as your Windows system starts.
SCTE retains any settings from the last time it was used, so it will always startup with any settings you have set from the last time it was stopped.
More information on SCTE and how it works can be found here:
http://saveontelephoneservices.com/modules.php?name=News&file=article&sid=11
The above takes care of calls so now lets deal with Skype Chat options.
Since there is no single entity, for example 1 Skype name that will always be around to answer all Skype Chat message at all times, you could create a Skype Group chat link that can be posted on web pages and in emails, but this would mean everyone can see everyones recent messages ("There are methods to disable prior older Skype Group Chat history, when new people join").
So if for example 2 people are asking questions in the Skype Group Chat, at that same moment in time, then both will see the others questions as well as the responses to those questions.
Once their questions are answered someone given what's known as master privilege abilility specifically to manage this Skype Group Chat can then, kick that person from the Skype chat ("They can always re-join later if needed") to keep the people in the Skype Group Chat, just the ones that have current questions, if needed.
The Skype Group Chat method is the best method for this because then there is no need to have you or the other Skype name(s) add each other as contacts before you can exchange Skype chat messages.
If you did a 1 to 1 Skype chat instead, for example, if that persons Skype name asking the questions had their privacy settings set to ("Contacts Only") you/they would need to exchange/approve contact details before communicating via Skype Chat messages.
Not sure if that's bad or good in your case?
So, you would need to respond, before I go into more details on how to deal with chats because my response will be based on your needs.
About Me You can also use a IP Camera as your camera for Skype video Example Instructions

Multiple users on same pc---how to differentiate when synching?

I doubt the subject line made any sense.
I bought the bride a NANO and I have an antique gen 1-
I am wondering how I can make certain that when synching her NANO, she does not get burdened with populating my playslists and vice versa...any advice is appreciated

When the iPods belong to different people, there are basically three ways of using multiple iPods on a computer and these involve:
a) Sharing a single iTunes library
b) Creating Multiple Libraries in a single Mac or Windows user account
c) Creating multiple Mac or Windows user accounts.
Note: When you are sharing an iTunes library, you don't have to set each iPod to update in the same manner, you can mix and match from the options below as each iPod has it's own update settings
Sharing a Library and/or User Account
If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish):
iPod - Syncing Music
Syncing Music to iPod shuffle
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose.
Or you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod and iPhone
Multiple Libraries
It's also possible to have multiple libraries in a single account. To create or access a second (or more) library, hold down the Shift key in Windows when launching iTunes. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. This can prove tricky when using multiple iPods, if you don't use the keyboard command you can risk syncing to the wrong library: Using multiple iTunes libraries -Windows
Separate User Accounts
Another option is to create a separate User account for each person on your PC. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists
I don't use Windows so I can't give you a step by step on that one, however I can point you to another web page which should help you out. You can read about Windows user accounts here: Create and customize user accounts in Windows XP

Read only / save problem when multiple user accessing PDF

When accessing a PDF-file from a network location (where multiple users might have the file open simultaneously) I have noticed a problem.
First of all you will not get notified when opening the file that it is open elsewhere, there is no "read only" mode in this case.
Secondly (and worse) is the fact that the person having opened the file first is prompted to save it under a new name when she/he is saving changes since "file is open elsewhere".
This works quite the opposite of what most Windows applications do.
Is it a problem in version 7 and 8 of Acrobat only?
I have heard from the support previously that it might be unsupported functionality to use network drives for editing. Is that true?
If you are doing updates after a review but want to share the outcomes of the review this quite annoying...

I agree, and I have seen the same points as well, but...
During the update process after the review many reviewers are looking at their comments and how they were handled during the review meeting and at the same time the authors (yes, for documents such as a requirement specification there will be more than one author) are doing the updates to the original document.
We are also updating the PDF with the changes made by adding new replies to the comments and also changing the status of the comments once more.
The logical approach when opening a file is not to display a text box, but to add the information in the title bar of the program. That way you do not add an extra step to the people who only want "read only" access.

One skype number for multiple users in Skype Manag...

Is it possible to get one Skype-in phone number and assign it to multiple members in Skype Manager?
If so, how do I go about it?
I also asked this here: http://community.skype.com/t5/Skype-Number/One-skype-number-for-multiple-users-in-Skype-Manager/m-p/...

You could always allocate a number to multiple business accounts in Skype Manager. Then re-direct the number via IP-PBX to go to different extensions.
Try the following here [If you look in the advanced section of this manual, you'll see an example of two accounts using one number]
http://download.skype.com/share/business/guides/skype-connect-user-guide.pdf
7.5 Online Numbers for incoming calls
You can use both business Skype accounts and Online Numbers simultaneously on a
single SIP Profile if you wish. In other words, you may have multiple business accounts
and Online Numbers added to one SIP Profile at the same time.
7.5.1 Adding an Online Number to your SIP Profile
Shows you how to setup such
Thanks,
Kent C.

Why does the Error: 500 SC_INTERNAL_SERVER_ERROR appear when multiple users access my JSPs but does not occur when only one user accesses my JSPs?

When multiple users run my JSP application, why do some users get an Error: 500 SC_INTERNAL_SERVER_ERROR for certain JSP pages with the error message No such file or directory. The JSP listed on the Error 500 page varies and is not always the same. When only one user runs my JSP application, the problem does not occur?
The database connection is held when the user logs in or accesses certain parts of the JSP and then is immediately released. No connections to the database are held.
We are using Solaris 8 with MU_6 plus recommended patches.
Enterprise Ultra 250
iAS 6 SP 3

Is anything showing up in the KXS or KJS logs?
It sounds like you might having some kind of thread safety issue with your code. Either that or your guess about running out of database connections.

Acrobat Reader Xi Crashes for Multiple users when they attempt to "Save As"

I have multiple users here running Windows 8 and Acrobat Reader Xi (11.0.05) and when they click 'save as' to save a PDF they are viewing, acrobat crashes every time.
Is there a resolution to this crashing probelm ?
I have tried uninstalling (using the cleanup tool as well) and reinstalling the program,
I have tried rolling back to an earlier version of Xi
So far nothing has worked.
Any insight or resolution would be greatly appreciated.

Uninstalled Reader 11.0.5
Ran the Acrobat cleanup tool v2
Installed Acrobat reader 11.0.6
Still have the same issue.
Narrowed this down to PDF files that are opened from a network drive.
If I copy the PDF to the local Drive of the PC I can open it and "save as" successfully.
If I open the PDF from the mapped network drive, and then "save as" Acrobat reader crashes every time.
Unfortunately we do all our work from the Shared Network Drives not from our local PC's

One skype number for multiple users in Skype Manager

Is it possible to get one Skype-in phone number and assign it to multiple members in Skype Manager? If so, how do I go about it? I also asked this here: http://community.skype.com/t5/Skype-Number/One-skype-number-for-multiple-users-in-Skype-Manager/m-p/3275656#M14366.

You could always allocate a number to multiple business accounts in Skype Manager. Then re-direct the number via IP-PBX to go to different extensions. Try the following here [If you look in the advanced section of this manual, you'll see an example of two accounts using one number]http://download.skype.com/share/business/guides/skype-connect-user-guide.pdf 7.5 Online Numbers for incoming callsYou can use both business Skype accounts and Online Numbers simultaneously on a
single SIP Profile if you wish. In other words, you may have multiple business accounts
and Online Numbers added to one SIP Profile at the same time. 7.5.1 Adding an Online Number to your SIP ProfileShows you how to setup such Thanks,Kent C.

WRT160n v3 has slow connection when multiple users are connected

As of last night my router has been producing slow connectivity when multiple users are connected to it, but it's perfectly fine when only one user is connected.
I am on a laptop myself, but we also have a second laptop and a desktop where the modem and router are set up.
I have upgraded the firmware so that is up to date.
We have Comcast Fiber Optics so my internet speed is normally quite fast even when all of my computers are connected.
Some settings that I have that might help resolve the issue:
I am using DHCP Configuration.
My Channel Width is set to 20 MHz and I am using Channel 11.
The Security Mode is set to WPA Personal. I had it on WPA2 Personal but I read that changing to WPA Personal might help and so far it doesn't seem to have done anything.
I set the Beacon Interval to 50, Fragmentation Threshold to 2304, and RTS Threshold to 2304.
Everything else is set to the default factory configuration.
Just today I received a notice that said "Windows has detected an IP Address Conflict", but ever since I reinstalled the Firmware it hasn't come back. I've rebooted both my laptop and the desktop to confirm it hasn't come back as well.
I consider myself to be computer savy, but I just can't figure out what the problem is as I've tried everything that I could think of including reconfiguring my router and restarting my modem as well. This problem has presented itself in the past before but unfortunately I cannot remember what I did to fix it.

Try using inSSIDer to help you find the best channel.
http://www.metageek.net/products/inssider/
If that doesn't help, you can try disabling WMM.
Edit: You should use WPA2 AES security for best performance.

Number of Seats when inviting multiple users to team

Similar Messages

Maybe you are looking for