Numbers | Export to PDF | Cannot Print Exported PDF

I am having a heck of a time with being able to print PDFs exported out of Numbers. I have tried both the File>Export command and I have printed to PDF and printed to Adobe PDF. Once I open the exported / printed PDF files in Acrobat Reader and try to print them, Reader freezes after 30 seconds of ramping up its memory usage in excess of 300MB. The PDFs are less than a MB in size. I have been able to successfully print the exported / printed PDF files using Preview on a Mac, but the reason I need to be able to convert my spreadsheets to PDF is so that a colleague in another state can print them from a PC. Anyone run into this issue? Any help is greatly appreciated!!

Jared
You wrote:
Is there a way to automate it such that it doesn't repeat the last row or do I just need to manually delete the formula out of all of the cells in the rows after the last?
There sure is. I was in a rush and made a mistake in my formula. I've posted solutions to this problem at least a half a dozen times here in the past and for some reason I didn't recall the bit that you are having trouble with. It came to me overnight that I had led you astray.
Here's a solution for the expression in the reduced table that I've used before and I'm pretty sure you will have success with:
=IF(ROW()<(MAX(Data :: E)+1), INDEX(Data, MATCH(ROW(), Data :: $E), COLUMN()), "")
Here's how it works...
The auxiliary column in the table Data reports the count of important rows. The reduced table searches for the count number in the Data table matching the row number in the reduced table. The Index function then transfers the data for the matching row. The problem in my posted solution was with the condition that limits the copying of rows to the reduced table.
Rather than checking the total number of rows in the data table, with an offset, I should have just checked to see how many "'important" rows there are by looking at the max count. The "+1" offset in the test is to account for the Header Row.
Regards,
Jerry

Similar Messages

Cannot print a PDF file after upgrading to Windows 8.1

Cannot print a PDF file after upgrading to Windows 8.1
I can print anything else from either the Desktop or Start but not a PDF. No error message but just does not print.
Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

Cannot print a PDF file after upgrading to Windows 8.1
I can print anything else from either the Desktop or Start but not a PDF. No error message but just does not print.
Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

I cannot print a PDF from Adobe Acrobat Pro or Adobe Reader with Mavericks!

I cannot print a PDF from Adobe Acrobat Pro or Adobe Reader. I tried on both MacBook Pros we have here, both now with Mavericks. Error message says "Opening printer connection failed. Unable to open printer connection . . . " This is after it says sending data, printing, shows the percentages etc., but then at the end I get the error message above. I can print a PDF (same one) from Preview, but not from Acrobat! What's going on? Never had this issue before Mavericks . . . Please help.

This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.

I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated

I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated
I followed the FAQ troubleshooting and that didn't help

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Cannot print a pdf off my mac 10.6.x. I can print all other files Epson printer 'Cancelling'

Cannot print any pdf from my mac to Epson printer
I can print all other files except pdf
Using the most updated Adobe Reader XI
Using the latest driver for the printer from Epson
Using a USB cable
Whats up?

I have the same problem, I cannot print ANY PDF file from my Mac running 10.8.5 Mountain Lion and using Adobe ReaderXI 11.0.4 I have verified that all files print properly when printed from within Preview or within Libre office. There is no option in the Mac Adobe reader to reset the installation like there is on Windows. I have also tried deleting reader completely and re-installing and the same behavior.

Why I cannot print a PDF with markups?

We use Acrobat Standard 7.0.8 and cannot print a PDF document form with markups. We found a "quick fix" to print it, which was to select in the print dialogue to print Document and Markups.
Question:
Because we've sent the form to our clients, they several have reported this about the form. Do you know why this would happen? Is it that they are using a different version of Adobe? Or what is the problem?
Joe

That's the way the application works. If you think the default should be to print the markups send a feature request to Adobe, but I doubt it will happen. You just need to explain to your clients how to do it. It's quite simple.

Cannot print a pdf file when the pdf file is opened in another window

Running FF8.0 I cannot print a pdf file when the file is contained in a separate window opened by the appl (not just another tab). Options -> options -> applications all point to Use Adobe Applications in Firefox. I've had this problem in 7.0, 6.0, etc but I believe I was finally able to print these external browser/adobe windows somehow. Printing a pdf file shouldn't be that tough. When I run into this situation, file can be printed from the external window by IE.

Check the document properties (Security) for this file in Adobe Reader; perhaps printing is not allowed?

Recently bought new printer. All works fine with one OSX user. However, cannot print anything on other OSX user, including cannot print Adobe PDFs or to new printer. Puzzling!

computer = Mac PowerPC G5
OS = 10.4.11
Adobe Acrobat 7
HP laserjet M1212nf
I recently bought a new HP printer. I was on an admin user when I installed it. All works fine with this admin account/user. I can print to the HP, print to Adobe PDFs.
However, when I then go over to another user account, I cannot print *anything*. I cannot print to Adobe PDF, cannot print to the new HP. If I try to print an excel file, it says "cannot communicate with the printer" along with some useless suggestions. If I try to print a page on FireFox, nothing happens. That is, sure I get the usual dialog box, click the appropriate choice of printer, click the number of copies, then click the OK button ... and nothing happens. No pdf process is started. Nothing is sent to the HP printer.
The fact that both printer options are not working suggests it is some kind of OS problem, not specific to either printer "device".
Any assistance is appreciated! Thanks!

Hi BDAqua,
Thanks for the suggestion. I'm a bit leery of trying that. I would think that if the driver was not installed, then none of my users could use the printer. However, both admin users can use the new printer. The list of available printers is:
Adobe PDF 7.0
New HP Printer
I also used to have Old HP Printer, which I removed. Before, Users A, B and C could use both the Adobe PDF and the Old HP printers. Then, after I added the New HP Printer, it showed up in the list of printers for all three users. However, after I added the new printer, only the two admin accounts, users A and C, can actually print anything. Both users A and C can use the Adobe PDF printer AND the New HP Printer. But I get error messages with user B, for both the Adobe PDF printer and the New HP Printer.

I cannot print adobe pdf documents as it is password protected. I forgot my password. How do I fix this problem?

I cannot print adobe pdf documents. Password protected. How do I fix this problem?

You'll need to remember it or recreate the PDF from the original file.
If there were an easy way to get around that, passwords wouldn't be worth much.

Uninstalled epson printer from control panel...installed new brother printer....now i cannot print anything .pdf old or newly downloaded

uninstalled epson printer from control panel...installed new brother printer....now i cannot print anything .pdf old or newly downloaded@

For starters, what exactly do you mean by "cannot print"?
Are you getting an error message? Are you trying to print from within Reader or are you opening these in the browser? What version of Reader. Even though it's a new printer, the drivers that came with it (or the ones that were already on your computer) may be old so, have you downloaded the most recent drivers from the Brother site?

Is there a difference between saving a word doc with images as a pdf or printing to pdf?

Is there a difference between saving a word doc with images as a pdf or printing to pdf. Images are sometimes missing when the document is saved as a pdf or they are visible to the document owner but seem to disappear when viewed after submission to grants.gov. and proposal Central.
Using Acrobat 9.5.5 and Office 2010 and Office 2011 Mac

Is there a difference between saving a word doc with images as a pdf or printing to pdf. Images are sometimes missing when the document is saved as a pdf or they are visible to the document owner but seem to disappear when viewed after submission to grants.gov. and proposal Central.
Using Acrobat 9.5.5 and Office 2010 and Office 2011 Mac

Cannot Print/Export to PDF in OBIEE 11G

Hello,
Since upgrading to OBIEE 11g (currently on 11.1.1.6) I have random occasions where I am unable to print a whole page or even export a single report to PDF. We experienced this when on 11.1.1.5 but all I get is an "Internet Explorer cannot dispaly this page" It is not related directly to IE as I am able to reproduce the error with Firefox as well.
Has anyone else seen and overcome this issue? I have been unsuccessful finding any information on this in Oracle's support KB. Any help or suggestions would be greatly appreciated.

It has been a while since I have checked this. Sorry for any delay. We have attempted to rearrange items however have had no luck.
On small break through we have is that we have a custom link setup using Microsoft IIS on our server so we can access the application from outside of our network rather than just internally. We have found that we only have the print/export issues when using this external link so there may be an issue with our IIS configuration. Just throwing that one out there in case anyone has had a similiar issue with IIS configuration and found a fix.

Export to pdf vs. print to pdf, from InDesign CS3

We are using Indesign CS3 on Windows XP. We are creating documents for offset printing, with 300dpi photos placed in the document. We are finding that when we "EXPORT" to pdf, and choose a "high quality print", the pdf is fine. However, if we 'print to pdf' and choose "high quality print", the photos in our pdf are more pixellated, and appear to be 150 dpi or lower resolution. Is this a problem with CS3? Does it make any difference how the tiff files have been placed, or sized, in InDesign? Has anyone else experienced this problem?

In the print dialog, when printing to PDF, under the graphics panel, make sure you change the default value of "Optimized Subsampling" to "all" for the "Send Image Data" field.
Peter

Exporting a PDF for print, the PDF does not show a shadow effect

I have a drop shadow effect on an EPS object and some type that does not appear when I export the file as a PDF for print. The settings I have it set to are: Adobe PDF Preset: "High Quality Print", Interactive Elements: "Include Appearance", and Color Conversion: "No Color Conversion".
If anyone could help me I would greatly appreciate it!

Will,
Yes, I set my transparency blending space to CMYK. It didn't work.
I don't have a particular reason I am using an EPS over AI other than that's the type of file this object (logo) was saved as. I can get an AI. Is there any particular reason you recommend not using an EPS?

Numbers | Export to PDF | Cannot Print Exported PDF

Similar Messages

Maybe you are looking for