Numeric keypad starts page search I cant use googleplugin VOIP

I am using Zorin OS with firefox - added Google 'call phone' - now, when I go to use the phone a search bar pops up at the bottom of my page and I can no longer continue dialling a number.... where should I start looking for a fix? Is this Zorin or Firefox ? My previous setup was Ubuntu with FF and it worked just fine - but dumped Ubuntu because of a 'disk full' glitch. Is there a way to turn off the "search" unless the Ctrl is used? I have multiple numeric codes I enter at work daily, if I cant free hand the numbers in it takes FOREVER to mouse click them in please help!

I couldn't wait, sorry.... installed chrome and it works fine now... but another PC is having issues that the plugin is asking to be downloaded even though I've BEEN using it and thats Win7 so will point to the plugin as the issue.
Thanks for your input! :)

Similar Messages

  • What is the URL for Nightly Start Page i want to use that in my Open a new tab?

    How can i find the URL for the new Nightly start page as i want to use it in the new tab so it is the same as the home page . i use the nightly start page as home page too

    hello caseyvan, "about:home" is the url for the default firefox/nightly start page. you can set that as a new tab page when you can enter '''about:config''' into the firefox location bar (confirm the info message in case it shows up) and search for the preference named '''browser.newtab.url'''. double-click the entry & change it to any site you want to show up on a new tab.

  • "Mozilla Firefox Start Page" Search Don't Work

    Start-page in Firefox 4-4.01, Where the search provider should be shown it's blank, search don't function.
    I tried Safemode and same issue.
    I have already tried the "DOM storage fix" as described here http://support.mozilla.com/en-US/questions/793424
    FF 4.01, Win.7 x86.

    The "Search Settings Plugin" extension may have been added by another extension like PDF Creator.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How can I stop when the first character I type into start page search matches my thunderbird password the whole password is revealed.

    Typing into the Mozilla start page my thunderbird/gmail password is revealed as a suggestion pop-up when the first character is typed.

    See:
    * http://kb.mozillazine.org/Deleting_autocomplete_entries

  • Firefox 4.01. I wish to have "Mozila Firefox S tart Page" as Start Page. I have used "How to set the home page" (tools, options, general, restory to default) but no result.

    # Numbered list item

    The part you are probably missing is
    When Firefox starts: "Start my Home page" (in the dropdown)
    the installed default home page is about:home in Firefox 4, but simply choose the "Restore to Default",
    then click on the "OK".
    see [https://support.mozilla.com/kb/How%20to%20set%20the%20home%20page How to set the home page | How to | Firefox Help]
    If that is not working then try instructions , and following the instructions suggest taking a picture of your toolbars first, so that you will be able to recustomize your toolbars afterwards, see [http://kb.mozillazine.org/Corrupt_localstore.rdf Corrupt localstore.rdf - MozillaZine Knowledge Base]
    After resetting, continue with [http://kb.mozillazine.org/Toolbar_customization Toolbar customization - MozillaZine Knowledge Base] and if you used small icons -- don't forget the checkmark for that in the dialog.

  • How do I change the default search engine on the Mozill Start Page?

    Yahoo has hijacked my start page search bar.
    I followed the advice in the answers to other yahoo related question, and now the start page search bar doesn't function at all and the upper search bar still default to yahoo.

    you can use this add-on [https://addons.mozilla.org/en-us/firefox/addon/searchreset/ searchreset]

  • Numeric keypad on wireless keyboard

    Is there a way to activate a numeric keypad on the Apple Wireless Keyboard using such keys as JKL etc?
    Cheers,
    Travis

    Hi Travis, possibly with one of these...
    http://www.shadowlab.org/Software/spark.php
    http://www.maketecheasier.com/spark-easily-create-hot-keys-for-almost-any-applic ation-in-mac/2010/09/24
    http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
    http://doublecommand.sourceforge.net/

  • The Mozilla WHITE start page is blocking the upper left Firefox to Print to Print Preview, so i can not see what is on the Printer Glass

    The BIG WHITE MOSTLY BLANK , MOZILLA START PAGE was blocking my use of PRINT PREVIEW, from the orange "Firefox" in the upper left corner.
    I was told i was using an out of date version of Firefox.
    But no "click here to update".
    So i downloaded the new edition of Firefox.
    And still, i can not see PRINT PREVIEW, because the large white screen of the MOZILLA START PAGE is blocking it.
    I have selected a background wallpaper, so would rather not see ANY of the BIG WHITE START PAGE, at all !!
    HEEEELP,,,,,,

    Hi,
    Can you please post a [https://en.wikipedia.org/wiki/Screenshot screenshot] of the start page when it is blocking the print preview. Please note that you may have to change to the tab of the site to be printed to see the print preview of the page. If the problem persists, please also check in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

  • I want to change the new tab page - it currently is a list of recent site - i share the computer and find this annoying. would like all tab pages to be same as start page

    i want my new tab pages to look the same as my starter page.

    Firefox by default uses a blank page for a new tab. Something you installed has changed that action to what you are complaining about. You need to figure out which add-on made that change and disable that add-on or change the preference in that add-on.
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Numeric keypad no longer works with 10.9

    Since updating to OS 10.9 I no longer have any input from the numeric keypad on any extended keyboard.  Using those number keys produces no input.

    This is not a solution at all, but a test.
    Since you are under snow and you don't want to go back I suppose...
    Download the leaked beta version of Blackberry Desktop Manager for Mac (see crackberry.com).
    Just test the connection (do nothing else).
    If the connection works (your pin is retrieved by the soft) you have a question on your desk : going back to Leopard or waiting for a maybe upgrade of the DM that today sync only with iCal and not with Entourage.
    Y. 

  • Control flow case to return from any page to start page!

    I need to use a Image Link at Master Page for go to "Start page". but when i use control flow case don't work.
    How can i assign a control flow case in a master page?
    My djeveloper version is 11.1.2.3

    You have to define what you mean by master page and start page. Are both pages are on the same talk flow?
    What do you mean by 'the navigation doesn't work'? Do you get an error?
    Normally you implement a wild card navigation which points to the start page. This navigation you use as target for the image link.
    Please post the code of your image link.
    Timo

  • Variable Start Page for iViews

    Hello,
    we are running a NW2004S (BW 7.0) portal.
    We have created a lot of iViews. In most of the iViews we have maintained a fix URL for the start page:
    for example:
    https://pbi.xxx-xxxx.de:443/sap/bc/bsp/sap/zfcplbalance/guv_freigabe_1.htm
    Now we have done a system copy to our development system. In the development system we have to use another URL:
    for example:
    https://ebi.xxxx-xxxxx.de:443/sap/bc/bsp/sap/zfcplbalance/guv_freigabe_1.htm
    Now, our iViews do not work in the development system, because the iViews still have the URL pbi instead of ebi.
    Is there a possiblity to maintain the start page flexible (instead of using the fix "pbi")?
    As system we use already SAP_BW.
    Thanks for your answer!
    XmchX

    Hi Praveen,
    Please check these threads
    [Change Portal URL;
    [Change portal URL;
    Wiki Link,
    [https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/change%2bportal%2burl]
    Reward Points for Helpful answers
    Thanks,
    Vamshi

  • E- Rec - Hiding links - Create / copy requisistions in Recruiter start page

    I use a MSS view for creating Requisitions and hence want to hide Create / Copy requisitions link in Recruiter start page --> maintain requisitions.
    Cn it be done with context changes. If yes, Can some one provide some info on the steps required.
    Thanks
    G Raj

    Hi,
    if you want to change the the appearance (grouping, links, texts) of a startpage this is completely done in customizing or better said you can define your own startpages and use some parts of the sap delivery if you like. The customizing for sartpages can be found in the IMG (T-Code SPRO) under SAP E-Recruiting -> Technical Settings -> User Interfaces -> (Settings for User Interfaces with Business Server Pages (BSP)) -> Start Pages.
    We usually define customer startpages in every project, this is really no big deal.
    If you want to remove a link from a page you should start by analysing the standard startpage as you will have to "rebuild" it. The standard startpage for the recruiter is 0003. Important to know is that IMG only contains customer customizing. The sap standard delivery is stored in own tables which can only be accessed using table tools e.g. SE11 or SE16.
    The tables for startpage customizing are named T77RCF_SP*:
    T77RCF_SP_ID(C) - Startpages
    T77RCF_SP_ID(C)T - Startpages texttable
    T77RCF_SP_GROUP(C) - Startpage groups (the blocks with a number of links)
    T77RCF_SP_GROUPT/GRPCT - Startpage groups texttable
    T77RCF_SP_LINK(C) - Links
    T77RCF_SP_LINK(C)T - Links texttable
    T77RCF_SP_ASID(C) - assignment of groups to startpages
    T77RCF_SP_ASGRP(C) - assignments of links to groups
    The table without C is the standard delivery, the one with C is the one for customer customizing.
    Just take a sheet of paper and start by getting all groups to the startpage 0003. This should be 1005, 1000, 1001, 2000, 1002, 1004, 1003 but could differ depending on release and support package. As you only want to change the 2nd group you will be able to reuse the others. Next get the links to the group you want to change. In my system it's group 1000 which contains links 1000, 1001, 1003 and 1004 according to T77RCF_SP_ASGRP.
    When you have this info you can start customizing your own startpage. you will need to create a new group in the IMG node -> Define Start Page Groups. Just use the information you find in the standard delivery and assign the 3 links you want to keep. Then create your startpage and assign the standard groups and instead of 1000 your own.
    Althought it is possible to use the same numbers for IDs like SAP I prefere using 9NNN for the ids so you always know if its standard or customer. furthermore do not forget to udate your authorization roles and add the new startpage.
    Best Regards
    Roman Weise  
    PS: of course it is your decision to hide links. But even if the managers create the requisitions using MSS the recruiters will work with their startpage only and they will have to be able to create and maintain requisitions so i am not sure if hiding the link is a good idea.

  • Numeric keypad not recognized by Window 7

    I have installed Windows 7 on my iMac using Boot Camp.
    Everything is working as it should except the numeric keypad. The numbers across the top of the keyboard work, but I really want the numeric keypad to be functional.
    Thanks

    Usually using the 'Clear'-key (the one directly above the '7'-key in the Numeric Pad) activates the Numeric Pad.
    http://support.apple.com/kb/HT1216
    Stefan

  • How do I in page search on atomic web browser

    I can't seem to figure out how to in page search when I use atomic web browser.

    When you select the search box, one of the options in the popup below it should be Search Current Webpage - highlight that, type in your text, and then press the 'search' button on the keyboard. You should then get Next, Previous, and Close buttons at the top of the screen

Maybe you are looking for

  • Error Message when trying to sign into account

    So I just got some itunes giftcards for xmas and when I go onto the itunes store and try to log into my account and message comes up that has a red "x" and it says "We could not complete your itunes store request. An unknown error has occured(-9812).

  • Open contracts

    Hi Friends, Is there any std trcode for getting the open contracts (SD)...or ABAP query is required to generate the report for the same. Thanks Ivy

  • Can't start xbmc.service since upgrade to xbmc 12.3-10

    Hi, I normally start xbmc via a service file and do not use a login manager, and have done successfully for some time now, I can no longer start xbmc.service since upgrading to xbmc 12.3-10 The errors I receive in the journal are: Feb 27 10:52:20 wol

  • [JS CS5] ScriptUI: changing position of cursor in EditText control

    Is there a way to change the position of the cursor in an EditText control? I've played around with the textselection property, but with no luck in getting the cursor between the right characters.

  • Depreciation run not posted for 2006/2007 and 2008.

    Hi, I have a situation where depreciation has not been posted for 2006,2007 and 2008. Now since there are 2 fiscal years already open the system does not allow to post to the 2008. since only 2 fiscal years can be open at a time. Old periods cannot b