NW 7.3 and roles from backend instances

Hi
I'm trying to find out more information about roles from backend instances in NW 7.3. In particular how the roles are synchronised with changes that may occur to the roles in the backend (ie role changes or users allocated to the role).
I haven't been able to find this kind of details in SAP Help or SMP.
Thanks
Doug

Hi,
I did face the same problem when i first configured AS JAVA system and really struggle and grease my elbow to get it working.
I would advise your to upgrade to latest SP level, SP03 and also the CIM and CR Content for SLD to eliminate all possible bugs.
However you can try as below:
1) go to SMSY -> search for the SID instance
2) Highlight the SID and click "Change"
3) Technical system editor will prompt out, and you'll see no Product Version and Product System assigned.
4) Next, navigate to software component and click on "Software Component Versions" and assigned the correct product instance by click the fitting SC proposal. SAVE and leave the page.
5) Now, go to SOLMAN TX: LVSM and webdynpro will display
6) Ensure the Landscape verification job is full sync and completed. Else, you can trigger using LVSM_LOAD.
7) Go to tab "Errors Warnings" and look for the SID, and you'll see that product instance SID is not assign to a product system.
8) on the same page, click "Add product system" and select the correct product and product version. For eg: Your product is Netweaver EHP2 you should first assign product as SAP Netweaver, and Version is EHP1.
9) Select the correct SID and correct Product Instance on the next screen, click Finish and SAVE once done. Remember, you can only select ONE PRODUCT INSTANCE HERE!!
10) Now, go back to Technical System Editor and change the entry for the particular SID.
11) Here, you can see the Product Versions and Product System is filled on the main object. Check all your entry and save is everything is correct.
12) Go back to SMSY, and you should able to see the SID is populated under the correct Product and Product Version.
13) Now in SMSY, you should able to change the data for Product System such as assign Installation no, read system number, sync with SAP and etc.
Hope it helps,
Cheers,
Nicholas Chang

Similar Messages

Move users and schemas from one instance to another

Hi, I'm starting out in a DBA position.
My task at the moment is to move users and schemas from one instance to another.
We're using 9.2.0.7.
I have concluded that the following steps are necessary to move users and schemas from one instance to another :
1. Create the needed tablespaces.
2. Create the users that exist in the source instance
3. Use exp to do a full export
4. Use imp to re-create the schemas from the output file created by exp in step 3
Am I missing anything ?
Thanks,
Gabriel

3. Use exp to do a full exportInstead of doing a FULL export just export the users you want to move and imp that in other database using FROMUSER & TOUSER parameter.
Daljit Singh

How to make upgrade from application server and not from central instance?

Hello SAP Gurus!
I have SAP ECC release 6.0, and I´m gonna make upgrade to enhancement package 6.06, do you know if Can I make upgrade from application server, but not from central instance?
Thanks.

Hi Victor,
Upgrade process has to execute from the server where message server is running.
So I guess it is not possible to initiate the SAP upgrade from application server.
Regards,
Deepak Kori

UWL slow and disconnects from backend

Hi guys,
The UWL is sometimes slow, it takes awhile to load the workflow items but after a portal bounce it is fine for awhile, the portal itself is fast it is just UWL. It sometimes tells you there are no items to retrieve, even if there are and if you look at the connection statuses of the connectors some fail and you can go to the UWL admin screen and reregister then, it does help sometimes but not always, the connectors show a failed status on the "actioninbox" and "adhocsystem" connectors as well, a deactivate/activate them doesn't help only a portal bounce.
Any assistance will be much appreciated!
We are on 2004s portal 7 sp12
Thanks
Theo

Hi,
you cannot use tcode RMPS_SET_SUBSTITUTE from backend when using UWL?
From what I can see, they both update table hrus_d2. But there may be other implications that I do not see?
I think if you use tcode in backend for substituatiion,user should do in backend only and it may not be available in portal.If you do substitution directly in portal,it will reflect correctly in both portal and backend,
You can try both options with tes workflow and see difference.
Regards,
Koti Reddy

Run-time reading of roles from backend system

EP5 unification provided the ability of displaying an end-user's backend system roles in the iPanel. This did not require importing the backend role to EP5. This greatly reduces the maintenance of roles in EP (especially with BW!

Hi Daniel,
You have a possibility to upload the whole Role from R/3 to EP6 Portal. You do it the following way:
Create system in Portal for your R/3.
Navigation to System Administration->Transport->Role Upload. Select system that you wish to upload Role from, search for your role.
That's it!
All objects in uploaded role become iViews.
Best Regards,
Julia

Move OAF personalizations and extensions from one instance to anothe

Please
tell me steps how to move Personlizations from one Instance to another Instance
Regards,
Vivek Gautam

Hi I am make changes at bean level making a field Read only by personalization.But that is not getting migrated or even shown in the XML file generated please help
DECLARE
BEGIN
jdr_utils.listcustomizations(p_document => '/oracle/apps/ar/cusstd/srch/webui/ArPrtySrchPG');
END;
/oracle/apps/ar/cusstd/srch/webui/customizations/function/AR_ARXCUDCI_QUICK_VIEW/ArPrtySrchPG
/oracle/apps/ar/cusstd/srch/webui/customizations/function/AR_ARXCUDCI_GATEWAY_VIEW/ArPrtySrchPG
/oracle/apps/ar/cusstd/srch/webui/customizations/function/AR_ARXCUDCI_STD_VIEW/ArPrtySrchPG
/oracle/apps/ar/cusstd/srch/webui/customizations/responsibility/67606/ArPrtySrchPG
/oracle/apps/ar/cusstd/srch/webui/customizations/site/0/ArPrtySrchPG
/oracle/apps/ar/cusstd/srch/webui/customizations/org/229/ArPrtySrchPG
/oracle/apps/ar/cusstd/srch/webui/customizations/responsibility/57647/ArPrtySrchPG
BEGIN
jdr_utils.printdocument(p_document => '/oracle/apps/ar/cusstd/srch/webui/customizations/responsibility/57647/ArPrtySrchPG');
END;
<?xml version='1.0' encoding='UTF-8'?>
<customization xmlns="http://xmlns.oracle.com/jrad" version="9.0.6.0.0_35" xml:lang="en-US" customizes="/oracle/apps/ar/cusstd/srch/webui/ArPrtySrchPG" xmlns:user="http://xmlns.oracle.com/jrad/user" user:responsibilityKey="cl cz_com_czk coll agent"
               user:responsibilityAppId="695">
   <modifications>
      <modify element="pageLayoutRN" controllerClass="oracle.apps.ar.cusstd.srch.webui.xxArPrtySrchCO2"/>
   </modifications>
</customization>

How to pull Roles and Policies from backend using SQL query in OIA

Hello,
I have Roles and Policies defined in OIA with mapping each other and there is no direct extract report from OIA Web console.
Is there any oracle SQL query by which we can get the data and filter the Policies based on the role ?
Note: We have one Role having more than one Polcies defined in OIA.
Appreciate your help.
Thanks

I am quoting this from MOS Doc Id "Why would multiple session records be present in the User Sessions screen in P6 Web, and why might some of them have different IP addresses? (Doc ID 1600172.1)"
Multiple sessions show up for users since different sections of P6 Web have their own sessions associated with them. If a user is authorized to use multiple areas of the software they will have multiple sessions each time they log in. Additionally, if users are closing their browsers before logging out of P6 Web Access you might see some past sessions still appearing in the list. These will eventually be cleared out by background jobs, however you can also reset the sessions in the software by clicking the "Reset User" link (Administer > User Sessions > Manage User Sessions), or by choosing the "Reset All Users" link (Administer > User Sessions > Manage User Sessions) to do this for all past sessions.
Multiple IP addresses for sessions can happen when a user logs in from different machines. For example, a person may login at their desk, but then go to a colleagues workstation to discuss a project, and log in from there. Doing so will leave them with multiple IP addresses in the session records.
Hope this helps
Regards,
Sachin Gupta

Problem with uploading the role from backend R3 ECC 5.0 system

hi all gurus,
         i have created one role in the back end sustem and then assigned it to one user.
         Now i have created one system to connect that backend system and mapped one portal user to that backend system user then i tried fro uploading the role problem.
         Now after prosessing the role upload it will show the report with error for "PROCESSING ATTRIBUTES" as follow:
15:31:18.452 Error Click for Details   Processing attributes
Then after click8ing on it it shows following thing
Time Stamp Severity Severity Text Details Stack Trace Message Text Message Long Text
15:31:18.593 Error   Click for Stack Trace Target undefined for type '0', system 'VR1CLNT800', key '* unknown *', subKey 'null'. SEVERE: getObject(portal_content/com.sap.portal.migrated/SAPComponentSystems/com.vcerp.ZTEST_UPLOAD1), entry '[RoleMenu, 00001034, , , 00000525, * unknown *, * unknown *, * unknown *, , VR1CLNT800, 00139842, 00000234]'.
15:31:19.93 Error   Click for Stack Trace Target undefined for type '0', system 'VR1CLNT800', key '* unknown *', subKey 'null'. SEVERE: getObject(portal_content/com.sap.portal.migrated/SAPComponentSystems/com.vcerp.ZTEST_UPLOAD1), entry '[RoleMenu, 00000387, , , 00000155, * unknown *, * unknown *, * unknown *, , VR1CLNT800, 00141548, 00001073]'.
15:31:19.218 Error   Click for Stack Trace Target undefined for type '0', system 'VR1CLNT800', key '* unknown *', subKey 'null'. SEVERE: getObject(portal_content/com.sap.portal.migrated/SAPComponentSystems/com.vcerp.ZTEST_UPLOAD1), entry '[RoleMenu, 00000922, , , 00000469, * unknown *, * unknown *, * unknown *, , VR1CLNT800, 00142382, 00001486]'.
and after clicking on one of the row on "Click for stack strace" It shows the following thing in "Stack trace for exception " window.
com.sap.portal.pcd.rolemigration.RoleMigrationException: Target undefined for type '0', system 'VR1CLNT800', key '* unknown *', subKey 'null'. at com.sap.portal.pcd.rolemigration.RoleMigration.getTargetUrl(RoleMigration.java:780) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.attrsRoleMenuItem(RoleMigrationObject.java:2999) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.addRoleAttibutes(RoleMigrationObject.java:3584) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:1719) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:769) at com.sap.portal.pcd.rolemigration.RoleMigrationThread.run(RoleMigrationThread.java:484)
So please help me to sort out this problem.
for further attachments
my email id is [email protected]
thanks in advance,
regards,
Hardik.

OPEN DATASET i_dsn IN LEGACY TEXT MODE FOR INPUT
for this statement add ENCODING DEFAULT
Reward if useful
Naveen

How to read ssas cube and role from Excel vba

Hi,
I want to read all roles and cubes in SSAS Db from Excel Vba.
1. First i want to read all the roles which was assigned to me
2. based on the role, i have to read all cube name
Please help me to
accomplish this task.

Hi Jack,
In Analysis Services, Each role contains members, by Windows username or by Windows group, and permissions (read, process, administrator). If the user has the permission to access SSAS database, then the account was contained in one or more roles. When connect
to SSAS database, we need to use an account to log on it, and SSAS will list all the cubes' name based on the role automatically.
Reference
Using Excel to interact with a SSAS cube
Regards,
Charlie Liao
TechNet Community Support

Help with copying permissions and roles from one user to another. Issue with RoleDefinitions

I need help please.
I’m trying to copy a role definition/name in SharePoint 2010 Powershell.
The below is only a piece of my script, but I have to find '$SearchUser" and wherever it lives (webs, lists, groups), I need to add "$account" and copy permissions
from '$SearchUser" . We are doing this to limit certain users from access our farm (by adding a new AD domain that does not contain these users, then deleting the old domain).
Every time I run it, it seems to mess up on this line:
$role = $web.RoleDefinitions.[$newRoleDef].
It is acting like the $newRoleDef is null, but it is not.
When I outputfile the $newRoleDef, it has values, such as Read, Contribute.
foreach($Web in $Site.AllWebs)
if($Web.HasUniqueRoleAssignments -eq $True)
foreach($WebRoleAssignment in $Web.RoleAssignments )
if($WebRoleAssignment.Member.userlogin)
if($WebRoleAssignment.Member.LoginName -eq $SearchUser)
$WebUserPermissions=@()
foreach ($RoleDefinition in $WebRoleAssignment.RoleDefinitionBindings)
$newRoleDef = $RoleDefinition.Name
$assignment = New-Object Microsoft.SharePoint.SPRoleAssignment($account)
$role = $web.RoleDefinitions.[$newRoleDef]
$assignment.RoleDefinitionBindings.Add($role)
$_.RoleAssignments.Add($assignment)

Hi,
Glad to hear that you solve this issue, thanks for your sharing.
Thanks,
Linda Li
Linda Li
TechNet Community Support

Importing master role from ECC into portal throws derived role exception

Hello,
While uploading master and derived role from backend system into the portal I am getting the following exception.
com.sap.portal.pcd.rolemigration.RoleMigrationException: Nested Exception. Failure to execute native function. Nested Exception. ROLE_IS_DERIVED
Does it imply that the derived role is already imported with the import of master role and there is no need to explicitly import the derived role?
The landscape uses role upload tool of portal for UME.
Regards
Pooja

Hi Pooja,
There is a limitation with the role upload tool that the derived roles cannot be uploaded.
The migration is only able to upload roles which have their own menus. Derived R/3 roles does not have menus themselves as they derive them from other roles. The purpose of the migration is to bring the R/3 navigation structures into the portal. Therefore you can only migrate the role from which your role is derived.
Regards
Anja

Extract Users and Roles

Hi,
I would like to move my users and roles from one system to another . Is there a way i can export and import the data back into the system.
I have already tried to export the repository schema and it did not give the necessary output.
I am working in 5.5 SP6 version
Regards,
Vignesh

Hi
You can do at Data base level using DML Queries, follow the below links.
How to Create Mass Users/Roles in SAP MDM Repository Running On Oracle Database
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0daad81-6a4b-2c10-9cb8-9586b0ebfb28?quicklink=index&overridelayout=true
How to Create Mass Users/Roles in SAP MDM Repository Running On SQL Database
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0224edf-bf37-2c10-228f-c16415815c5f?quicklink=index&overridelayout=true
regards
Sowseel

How to create AP payment terms and withholding tax from backend ?

Hi All,
I have a requirement to create the AP Payment terms and withholding tax from backend as the data is going to be uploaded into 15 different instances therefore for the convenience i am looking for any API or Interface to create these from backend.
Thanks & Regards,
Mayur

Hi Gurus,
Please give me some information on this.
Thanks,
Mayur

Synchornized automatically roles into CUP from Backend

Hi all,
We would like to synchronize the roles between backend and CUP both periodically and automatically.
We have only RAR and CUP modules in our GRC.
We can synchronize the roles between CUP and backend by executing regularly the import role job in CUP from Configuration->Roles ->Import Roles or roles could be loaded from backend.
But we are looking for a way to synchornized automatically a list of roles into CUP from backend. It is possible?
Thanks in advance
Marta

Hi Marta,
nope, unfortunately there is no feature to do so.
Best,
Frank

Hyper-v cannot be installed: A hypervisor is already running: VMware Workstation and Hyper-v are not compatible. Remove the Hyper-V role from the system before running Vmware Workstation

When I try to go to Control Panel\Programs and click on turn windows features on/off and , it shows ticks on hyper-v is removed.
Hyper-v platform Is grayed out and When i move the mouse point to Hyper-v platform it shows a message.
"Hyper-v cannot be installed: A hypervisor is already running"
When I try to install vmware it says..
VMware Workstation and Hyper-v are not compatible. Remove the Hyper-V role from the system before running Vmware Workstation..

I dont feel you can do this. I have also tried what you tried and ended up with a failure.. So had to stick with vmware in one instance and for other instance hyper v...
For further details raise your question here http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
and
https://communities.vmware.com/community/vmtn/developer/forums
Good luck..

NW 7.3 and roles from backend instances

Similar Messages

Maybe you are looking for