NWCE components mentioned in the excercise

Hi,
I am referening an excercise from TechEd 08 contents. Is there any place from where I can get the solution contents for working the excercises?
For example the excercise "BPM360_Solution_Modeling a Business Process Using SAP NetWeaver BPM and SAP NetWeaver CE 7.1.1 EHP1" refers to a development component "bpm360_wd_sol" in page number 23. Where can I get these DCs mentioned in such excercises.
Thanking in advance.
Regards,
Ram.

Hello.
If you go to the global sitre found at www.sap.com/certification, you can find prep materials for a number of exams. In addition, there are competeny areas for the full range of certifications in order to guide your preparation.
Regards,
Richard Strattner

Similar Messages

Can not delete Twitter mentions from the Hub

Can not delete Twitter mentions from the Hub. When I delete, they reappear in a few minutes.

I had the same problem,so i just deleted Twitter altogethet. Like was said before it must be bug among many they seem to have,including password compromises

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

Questions on the Hardware requirement mention in the 12c installation guide

Hello experts,
I have a confusion on the Hardware requirements mentioned in the 12c installation guide where they mentioned as below.
RAM with ADP1, JVMD2 8 GB 12 GB 20 GB
1 ADP Manager is Application Dependency and Performance
2 JVMD is JVM Diagnostics
Question 1: what does this RAM with ADP or JVMD mean. is it just the additional RAM space required in the server or does is that special requirement ??
Oracle WebLogic Server JVM Heap 1.7 GB 4 GB 8 GB
Size
Question 2: What is this JVM Heap size ? how do we configure this in the server ??
Thanks in Advance for your Help.

Hi,
#1: It means if you also want to install ADP and JVMD, the total RAM required is a small (e.g. < 1000 targets), medium (e.g. > 1000 targets and < 10000 targets), large EM deployment (e.g. > 10000 targets) is 8 GB, 12 GB, 20 GB, respectively. That is the memory requirement for an OMS host.
#2: The heap size for the OMS java process. You can adjust the heap size by changing the -Xmx<heapsize> (see an example below) in the following file:
<middleware_home>/gc_inst/user_projects/domains/GCDomain/bin/startEMServer.sh
An example of OMS heap size setting of 2048 MB:
if [ "${SERVER_NAME}" != "EMGC_ADMINSERVER" ] ; then
USER_MEM_ARGS="-Xms256m -Xmx1740m -XX:MaxPermSize=768M -XX:-DoEscapeAnalysis -XX:+UseCodeCacheFlushing"
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
if [ "${PRODUCTION_MODE}" = "" ] ; then
USER_MEM_ARGS="-Xms256m -Xmx2048m -XX:MaxPermSize=768M -XX:-DoEscapeAnalysis -XX:+UseCodeCacheFlushing -XX:+UseConcMarkSweepGC -XX:+UseParNewGC -XX:+CMSClassUnloadingEnabled -XX:CompileThreshold=8000 -XX:PermSize=128m"
Regards,
- Loc

How can we prevent JTabbedPanes from transferring focus to components outside of the tabs during tab traversal?

Hi,
I noticed a strange focus traversal behavior of JTabbedPane.
During tab traversal (when the user's intention is just to switch between tabs), the focus is transferred to a component outside of the tabs (if there is a component after/below the JTabbedPane component), if using Java 6. For example, if using the SSCCE below...
import java.awt.BorderLayout;
import java.awt.event.FocusAdapter;
import java.awt.event.FocusEvent;
import java.awt.event.KeyEvent;
import javax.swing.Box;
import javax.swing.BoxLayout;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTabbedPane;
import javax.swing.JTextField;
import javax.swing.SwingUtilities;
public class TabbedPaneTest extends JPanel {
    public TabbedPaneTest() {
        super(new BorderLayout());
        JTabbedPane tabbedPane = new JTabbedPane();
        tabbedPane.addTab("Tab 1", buildPanelWithChildComponents());
        tabbedPane.setMnemonicAt(0, KeyEvent.VK_1);
        tabbedPane.addTab("Tab 2", buildPanelWithChildComponents());
        tabbedPane.setMnemonicAt(1, KeyEvent.VK_2);
        tabbedPane.addTab("Tab 3", buildPanelWithChildComponents());
        tabbedPane.setMnemonicAt(2, KeyEvent.VK_3);
        tabbedPane.addTab("Tab 4", buildPanelWithChildComponents());
        tabbedPane.setMnemonicAt(3, KeyEvent.VK_4);
        JPanel panel = new JPanel(new BorderLayout());
        panel.add(tabbedPane);
        JButton button = new JButton("Dummy component that gains focus when switching tabs");
        panel.add(button, BorderLayout.SOUTH);
         * To replicate the focus traversal issue, please follow these steps -
         * 1) Run this program in Java 6; and then
         * 2) Click on a child component inside any tab; and then
         * 3) Click on any other tab (or use the mnemonic keys ALT + 1 to ALT 4).
        button.addFocusListener(new FocusAdapter() {
            @Override
            public void focusGained(FocusEvent e) {
                System.err.println("Gained focus (not supposed to when just switching tabs).");
        add(new JScrollPane(panel));
    private JPanel buildPanelWithChildComponents() {
        JPanel panel = new JPanel();
        BoxLayout boxlayout = new BoxLayout(panel, BoxLayout.PAGE_AXIS);
        panel.setLayout(boxlayout);
        panel.add(Box.createVerticalStrut(3));
        for (int i = 0; i < 4; i++) {
            panel.add(new JTextField(10));
            panel.add(Box.createVerticalStrut(3));
        return panel;
    public static void main(String[] args) {
        SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                JFrame frame = new JFrame("Test for Java 6");
                frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
                frame.add(new TabbedPaneTest());
                frame.pack();
                frame.setVisible(true);
... Then we can replicate this behavior by following these steps:
1) Run the program in Java 6; and then
2) Click on a child component in any of the tabs; and then
3) Click on any other tab (or use the mnemonic keys 'ALT + 1' to 'ALT + 4').
At step 3 (upon selecting any other tab), the focus would go to the component below the JTabbedPane first (hence the printed message in the console), before actually going to the selected tab.
This does not occur in Java 7, so I'm assuming it is a bug that is fixed. And I know that Oracle suggests that we should use Java 7 nowadays.
The problem is: We need to stick to Java 6 for a certain application. So I'm looking for a way to fix this issue for all our JTabbedPane components while using Java 6.
So, is there a way to prevent JTabbedPanes from passing the focus to components outside of the tabs during tab traversal (e.g. when users are just switching between tabs), in Java 6?
Note: I've read the release notes between Java 6u45 to Java 7u15, but I was unable to find any changes related to the JTabbedPane component. So any pointers on this would be deeply appreciated.
Regards,
James

Hi Kleopatra,
Thanks for the reply.
Please allow me to clarify first: Actually the problem is not that the child components (inside tabs) get focused before the selected tab. The problem is: the component outside of the tabs gets focused before the selected tab. For example, the JButton in the SSCCE posted above gets focused when users switch between tabs, despite the fact that the JButton is not a child component of the JTabbedPane.
It is important for me to prevent this behavior because it causes a usability issue for forms with 'auto-scrolling' features.
What I mean by 'auto-scrolling' here is: a feature where the form automatically scrolls down to show the current focused component (if the component is not already visible). This is a usability improvement for long forms with scroll bars (which saves the users' effort of manually scrolling down just to see the focused component).
To see this feature in action, please run the SSCCE below, and keep pressing the 'Tab' key (the scroll pane will follow the focused component automatically):
import java.awt.BorderLayout;
import java.awt.Component;
import java.awt.GridBagConstraints;
import java.awt.GridBagLayout;
import java.awt.Insets;
import java.awt.event.FocusAdapter;
import java.awt.event.FocusEvent;
import java.awt.event.KeyEvent;
import javax.swing.JButton;
import javax.swing.JComponent;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTabbedPane;
import javax.swing.JTextField;
import javax.swing.JViewport;
import javax.swing.SwingUtilities;
public class TabbedPaneAutoScrollTest extends JPanel {
    private AutoScrollFocusHandler autoScrollFocusHandler;
    public TabbedPaneAutoScrollTest() {
        super(new BorderLayout());
        autoScrollFocusHandler = new AutoScrollFocusHandler();
        JTabbedPane tabbedPane = new JTabbedPane();
        tabbedPane.addTab("Tab 1", buildPanelWithChildComponents(20));
        tabbedPane.setMnemonicAt(0, KeyEvent.VK_1);
        tabbedPane.addTab("Tab 2", buildPanelWithChildComponents(20));
        tabbedPane.setMnemonicAt(1, KeyEvent.VK_2);
        tabbedPane.addTab("Tab 3", buildPanelWithChildComponents(20));
        tabbedPane.setMnemonicAt(2, KeyEvent.VK_3);
        tabbedPane.addTab("Tab 4", buildPanelWithChildComponents(20));
        tabbedPane.setMnemonicAt(3, KeyEvent.VK_4);
        JPanel panel = new JPanel(new BorderLayout());
        panel.add(tabbedPane);
        JButton button = new JButton("Dummy component that gains focus when switching tabs");
        panel.add(button, BorderLayout.SOUTH);
         * To replicate the focus traversal issue, please follow these steps -
         * 1) Run this program in Java 6; and then
         * 2) Click on a child component inside any tab; and then
         * 3) Click on any other tab (or use the mnemonic keys ALT + 1 to ALT 4).
        button.addFocusListener(new FocusAdapter() {
            @Override
            public void focusGained(FocusEvent e) {
                System.err.println("Gained focus (not supposed to when just switching tabs).");
        button.addFocusListener(autoScrollFocusHandler);
        JScrollPane scrollPane = new JScrollPane(panel);
        add(scrollPane);
        autoScrollFocusHandler.setScrollPane(scrollPane);
    private JPanel buildPanelWithChildComponents(int numberOfChildComponents) {
        final JPanel panel = new JPanel(new GridBagLayout());
        final String labelPrefix = "Dummy Field ";
        final Insets labelInsets = new Insets(5, 5, 5, 5);
        final Insets textFieldInsets = new Insets(5, 0, 5, 0);
        final GridBagConstraints gridBagConstraints = new GridBagConstraints();
        JTextField textField;
        for (int i = 0; i < numberOfChildComponents; i++) {
            gridBagConstraints.insets = labelInsets;
            gridBagConstraints.gridx = 1;
            gridBagConstraints.gridy = i;
            panel.add(new JLabel(labelPrefix + (i + 1)), gridBagConstraints);
            gridBagConstraints.insets = textFieldInsets;
            gridBagConstraints.gridx = 2;
            textField = new JTextField(22);
            panel.add(textField, gridBagConstraints);
            textField.addFocusListener(autoScrollFocusHandler);
        return panel;
    public static void main(String[] args) {
        SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                JFrame frame = new JFrame("Test for Java 6 with auto-scrolling");
                frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
                frame.add(new TabbedPaneAutoScrollTest());
                frame.setSize(400, 300);
                frame.setVisible(true);
* Crude but simple example for auto-scrolling to focused components.
* Note: We don't actually use FocusListeners for this feature,
*       but this is short enough to demonstrate how it behaves.
class AutoScrollFocusHandler extends FocusAdapter {
    private JViewport viewport;
    private JComponent view;
    public void setScrollPane(JScrollPane scrollPane) {
        viewport = scrollPane.getViewport();
        view = (JComponent) viewport.getView();
    @Override
    public void focusGained(FocusEvent event) {
        Component component = (Component) event.getSource();
        view.scrollRectToVisible(SwingUtilities.convertRectangle(component.getParent(),
                component.getBounds(), view));
Now, while the focus is still within the tab contents, try to switch to any other tab (e.g. by clicking on the tab headers, or by using the mnemonic keys 'ALT + 1' to 'ALT + 4')...
... then you'll notice the following usability issue:
1) JRE 1.6 causes the focus to transfer to the JButton (which is outside of the tabs entirely) first; then
2) In response to the JButton gaining focus, the 'auto-scrolling' feature scrolls down to the bottom of the form, to show the JButton. At this point, the tab headers are hidden from view since there are many child components; then
3) JRE 1.6 transfers the focus to the tab contents; then
4) The 'auto-scrolling' feature scrolls up to the selected tab's contents, but the tab header itself is still hidden from view (as a side effect of the behavior above); then
5) Users are forced to manually scroll up to see the tab headers whenever they are just switching between tabs.
In short, the tab headers will be hidden when users switch tabs, due to the Java 6 behavior posted above.
That is why it is important for me to prevent the behavior in my first post above (so that it won't cause usability issues when we apply the 'auto-scrolling' feature to our forms).
Best Regards,
James

Hi, I developed a web application using HTML5-Offline Application Cache mechanism. Inspite of deleting the cache as mentioned in the above steps, Firefox still maintains a copy of the page in it's cache. Also, a serious bug is, even though we delete all

== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
Hi,
I developed a web application using HTML5-Offline Application Cache mechanism. Inspite of deleting the cache as mentioned in the above steps, Firefox still maintains a copy of the page in it's cache. Also, a serious bug is, even though we delete all temp files used by Firefox, and open the previously cached page, it displays it correctly, but upon refreshing/reloading it again shows the previous version of the page maintained in the cache.
== Troubleshooting information
==
HTML5: Application Caching
.style1 {
font-family: Consolas;
font-size: small;
text-align: left;
margin-left: 80px;
function onCacheChecking(e)
printOutput("CHECKINGContents of the manifest are being checked.", 0);
function onCacheCached(e) {
printOutput("CACHEDAll the resources mentioned in the manifest have been downloaded", 0);
function onCacheNoUpdate(e)
printOutput("NOUPDATEManifest file has not been changed. No updates took place.", 0);
function onCacheUpdateReady(e)
printOutput("UPDATEREADYChanges have been made to manifest file, and were downloaded.", 0);
function onCacheError(e) {
printOutput("ERRORAn error occured while trying to process manifest file.", 0);
function onCacheObselete(e)
printOutput("OBSOLETEEither the manifest file has been deleted or renamed at the source", 0);
function onCacheDownloading(e) {
printOutput("DOWNLOADINGDownloading resources into local cache.", 0);
function onCacheProgress(e) {
printOutput("PROGRESSDownload in process.", 0);
function printOutput(statusMessages, howToTell)
* Outputs information about an event with its description
* @param statusMessages The message string to be displayed that describes the event
* @param howToTell Specifies if the output is to be written onto document(0) or alert(1) or both(2)
try {
if (howToTell == 2) {
document.getElementById("stat").innerHTML += statusMessages;
window.alert(statusMessages);
else if (howToTell == 0) {
document.getElementById("stat").innerHTML += statusMessages;
else if (howToTell == 1) {
window.alert(statusMessages);
catch (IOExceptionOutput) {
window.alert(IOExceptionOutput);
function initiateCaching()
var ONLY_DOC = 0;
var ONLY_ALERT = 1;
var BOTH_DOC_ALERT = 2;
try
if (window.applicationCache)
var appcache = window.applicationCache;
printOutput("BROWSER COMPATIBILITYSUCCESS!! AppCache works on this browser.", 0);
appcache.addEventListener('checking', onCacheChecking, false);
appcache.addEventListener('cached', onCacheCached, false);
appcache.addEventListener('noupdate', onCacheNoUpdate, false);
appcache.addEventListener('downloading', onCacheDownloading, false);
appcache.addEventListener('progress', onCacheProgress, false);
appcache.addEventListener('updateready', onCacheUpdateReady, false);
appcache.addEventListener('error', onCacheError, false);
appcache.addEventListener('obsolete', onCacheObselete, false);
else
document.getElementById("stat").innerHTML = "Failure! I cant work.";
catch (UnknownError)
window.alert('Internet Explorer does not support Application Caching yet.\nPlease run me on Safari or Firefox browsers\n\n');
stat.innerHTML = "Failure! I cant work.";
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 ( .NET CLR 3.5.30729; .NET4.0E)
== Plugins installed
==
*-Shockwave Flash 10.0 r45
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Google Update
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network Object
Thanks & Regards,
Kandarpa Chandrasekhar Omkar
Software Engineer
Wipro Technologies
Bangalore.
[email protected]
[email protected]

We have had this issue many, many times before including on the latest 3.6 rev. It appears that when the applicationCache has an update triggered by a new manifest file, the browser may still use only its local network cache to check for updates to the files in the manifest, instead of forcing an HTTP request and revalidating both the browser cache and the applicationCache versions of the cached file (seems there is more than one). I have to assume this is a browser bug, as one should not have to frig with server Cache-Control headers and such to get this to work as expected (and even then it still doesn't sometimes).
The only thing that seems to fix the problem is setting network.http.use-cache to false (default is true) in about:config . This helps my case because we only ever run offline (applicationCache driven) apps in the affected browser (our managed mobile apps platform), but it will otherwise slow down your browser experience considerably.

How to create "Business Components Package" in the Jdeveloper ?

Hi,
I installed and set up "Patch 7523554 10G Jdeveloper With OA Extension ARU for R12 RUP6"
I have ran out the test_fwktutorial.jsp and test_fwklabsolutions.jsp.
All links work properly on these pages.
I created HelloWorld page from "Oracle Application Framework Toolbox Tutorials".
Its works properly too.
Then I started to create "Search Page".
I created "Business Component project" in the toolbox.jws.
I was trying to perform step 2.1 "Create the BC4J Package for Client (UI) Objects".
But I didn't find "Business Components Package" in the context menu.
Could you give me advice how can I create package of this kind ?
Thanks.

I created "OA Workspace" and simultaneously with it created "Business Components Package" <yourname>.oracle.apps.ak.employee.
After this it i necessary to creates one more "Business Components Package" <yourname>.oracle.apps.ak.schema.server
I failed to create Package of this kind.
In the "BC4J Tutorial" It seems to me I found similr actions.
I suppose I may perform next step:
Figure 6-3 http://download.oracle.com/docs/html/A97671_01/wtgbc4j.htm#BABIAIEI
Figure 6-4 http://download.oracle.com/docs/html/A97671_01/wtgbc4j.htm#BABJIIII
But I failed to pass these steps.
Could you tell me, please, how to do this?
Thanks.

[svn] 4634: First part of glue code for allowing Halo components to use the new Text Layout Framework , in order to get functionality such as bidirectional text.

Revision: 4634
Author:   [email protected]
Date:     2009-01-22 17:38:56 -0800 (Thu, 22 Jan 2009)
Log Message:
First part of glue code for allowing Halo components to use the new Text Layout Framework, in order to get functionality such as bidirectional text.
Background:
TLF is making this possible by implementing a TLFTextField class. It is a Sprite that uses TLF to implement the same properties and methods as the legacy TextField class in the Player. Thanks to the createInFontContext() bottleneck method in UIComponent, it can be used by a properly-written Halo component (such as those in Flex 3) without any modifications to the component.
Note: Text should render similarly -- but is unlikely to render identically -- when a component uses TLFTextField vs. TextField. The width and height may be different, affecting layout; text could wrap differently; etc. This is a fact-of-life based on the fact that TLF/FTE and TextField are completely different text engines.
Whether a Halo component uses TLF or not to render text will be determined in Flex 4 by a new style, textFieldClass. (Gumbo components always use TLF.)
TLFTextField is currently only partially implemented. It does not yet support scrolling, selection, editing, multiple formats, or htmlText. Therefore it can only be used for simple display text, such as a Button label.
Details:
The TextStyles.as bucket 'o text styles now includes a non-inheriting textFieldClass style. It can be set to either mx.core.UITextField or mx.core.UITLFTextField. These are the Flex framework's wrapper classes around the lower-level classes flash.text.TextField (in the Player) and its TLF-based workalike, flashx.textLayout.controls.TLFTextField.
The global selector in defaults.css currently sets it to mx.core.UITextField using a ClassReference directive. For the time being, all Halo components will continue to use the "real" TextField.
The new UITLFTextField is a copy of UITextField, except that it extends TLFTextField instead of TextField. This class has been added to FrameworkClasses.as because no classes in framework.swc have a dependency on it. It will get soft-linked into applcations via the textFieldClass style.
The TLFTextField class currently lives in a fourth TLF SWC, textLayout_textField.swc. This SWC has been added to various build scripts. The external-library-path for building framework.swc now includes all four TLF SWCs, because UITLFTextField can't be compiled and linked without them. However, since they are external they aren't linked into framework.swc.
Properly-written Halo UIComponents access their text fields only through the IUITextField interface, and they create text fields like this:
textField = IUITextField(createInFontContext(UITextField));
(The reason for using createInFontContext() is to support embedded fonts that are embedded in a different SWF.)
The createInFontContext() method of UIComponent has been modified to use the textFieldClass style to determine whether to create a UITextField or a UITLFTextField.
With these changes, you can now write code like
to get two Buttons, the first of which uses UITextField (because this is the value of textFieldClass in the global selector) and the second of which uses UITLFTextField. They look very similar, which is good!
Currently, both Buttons are being measured by using an offscreen TextField. A subsequent checkin will make components rendering using UITLFTextField measure themselves using an offscreen TLFTextField so that measurement and rendering are consistent.
QE Notes: None
Doc Notes: None
Bugs: None
Reviewer: Deepa
Modified Paths:
    flex/sdk/trunk/asdoc/build.xml
    flex/sdk/trunk/build.xml
    flex/sdk/trunk/frameworks/projects/framework/build.xml
    flex/sdk/trunk/frameworks/projects/framework/defaults.css
    flex/sdk/trunk/frameworks/projects/framework/src/FrameworkClasses.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/metadata/TextStyles.as
Added Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UITLFTextField.as

Many of your points are totally legitimate.
This one, however, is not:
…To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

Vendor Details mentioned in the agreement

Hi All,
We need to generate a report (excel) that lists all the vendors ( vendors of outline agreements) records in SAP which shows. SAP ID number, vendor name, address, 'blocked' status and 'marked for deletion' status and purchase orgs created in.
Can anyone suggest me from which tables i can generate this report for the vendors mentioned in the Outline agreements.
Thanks.

LFA1 - vendor master general
LFB1 - vendor master company code
for vendor address: Get the address number ADRNR from LFA1 table and pass it to ADRC table to get the complete contact details

I live in the UAE and i dont have the face time app on my iphone 5 and it's not showing in the settings list as well only face time mentioned in the notification center , my friends in the same area are using face time normally any advice?

i live in the UAE and i dont have the face time app on my iphone 5 and it's not showing in the settings list as well only face time mentioned in the notification center , my friends in the same area are using face time normally any advice?

Doesn't matter. That store is likely selling illegit iphones, brought oin from somewhere else.
The fact remains the UAE government does not allow Facetime on iphones legitimately sold there.

HT1338 In my e mails, I cannot get to a web page that is mentioned in the body of the e mail

In my e mails, I cannot get to a web page that is mentioned in the body of the e mail.

That's probably a bookmark you have saved in Favorites.
Tap bookmark icon>Favorites>Edit>Delete the bookmark

TS1574 you should mention that the audio output jack is fleaky, try plugging and unplugging until red light goes off !!!

It should be mentionned in the Apple help that the audio output jack is sometimes fleaky, as it does not reclose the speakers contacts correctly when an earphone jack is removed. This can be checked by looking into the computer audio jack and seeing a red light, which confirms the optic output is active. Plugging and unplugging the jack until the red light disapears is the cure, unless you are unfortunate enough to have a broken audio jack. Good luck !

Same here. I don't remember doing anything out of the ordinary. I was working in Parallels on getting a AM station to stream via some web interface. Next time I went to play sound on the internal speakers, no go.
I've tried zapping the PRAM, toggling the headphone jack and the toothpick thing. Nothing seems to work.
I've also noticed that I get sound in my headphones in iTunes but not in Garageband (someone had suggested that starting up Garageband would reset things.
Any other ideas out there?
Is there a file that could get corrupted that I could switch out of my back up?

Mx Components displaying wrong the embedded Font

Hi, I'm developing with Adobe Flash Builder 4.5 and I have a problem that the mx components displaying wrong the embedded font which is embedded in a css-file. But spark components have no problems with displaying the embedded font.
thanks

See the embedded fonts post on my blog. The MX components default to a
different embedded font subsystem.
Alex Harui
Flex SDK Team
Adobe System, Inc.
http://blogs.adobe.com/aharui

TS1538 Ipod is stuck in recovery mode, and not recognized by iTunes. Tried all of the recommended resets and combinations mentioned, but the ipod is still not recognized. Genius said it may be a hardware error, but all of the buttons and cords work. Now

iPod is stuck in recovery mode, and not recognized by iTunes.
Tried all of the recommended resets and combinations mentioned, but the ipod is still not recognized. Genius at apple said it may be a hardware error, "The button is broke" but all of the buttons and cords work and i proved it to him. He then said he doesnt know, ma Now what?

If it does not work on other computers then I agree with the Genius

[svn:fx-trunk] 11118: Did some code cleanup on the Spark components to enforce the conventions about how to order stuff within an AS file .

Revision: 11118
Author:   [email protected]
Date:     2009-10-23 16:35:38 -0700 (Fri, 23 Oct 2009)
Log Message:
Did some code cleanup on the Spark components to enforce the conventions about how to order stuff within an AS file.
QE notes: None
Doc notes: None
Bugs: None
Reviewer: None; no functional changes
Tests run: ant checkintests
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/ButtonBar.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/CheckBox.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DropDownList.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/List.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/NumericStepper.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Panel.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RadioButton.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Spinner.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/TextArea.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/TextInput.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/ButtonBase.a s
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/ListBase.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/SkinnableTex tBase.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Slider.as

Hi Rod,
different sources (i.e. different branches) are mapped to different local folders in your workspace - in fact you cant map two different server folder to the same local folder.
In you example the mapping would be (for example) like this:
Server path
local path
$/../WpfHelloWorld
C:\Src\WpfHelloWorld
$/../WpfHelloWorldDev
C:\Src\WpfHelloWorldDev
You can see your Workspace mappings when you select "Workspaces..." in the Workspace selection drop down:
Within the "Manage Workspaces" dialog select your workspace and klick "Edit" to see and edit all you mappings.

NWCE components mentioned in the excercise

Similar Messages

Maybe you are looking for