Nx pro - bundled software

Where can I get the bundled software that came with my camera (NX PRO)? I lost the disk, but would like the utility that let's you take snapshots.
Can anyone please help?

Hi.
Had same problem myself but I think I found an application that works on their support pages.
Support - Software - Creative webcam monitor version 2.06.04
Good luck.

Similar Messages

  • ILife "Bundled Software Cannot Be Installed" on Leopard Upgrade Error

    I had to do a clean install of Leopard after the installation stopped midway through the first time. It was successful the 2nd time.
    Ilife was of course missing so I put back in my Tiger install disk that came with the computer (2.16 GHZ Mac Book Pro 17", 2GB 667m DDR2 SDRAM) clicked on "Install Bundled Software Only" to get ILife and I get the error "Bundled Software Cannot Be Installed on this computer. Make sure your system meets the requirements"
    How do I get around this?
    What could be causing it?

    I think I did the Erase and install.
    Basically I tried to upgrade to Leopard. The upgrade did not work and got stuck in the middle. I was worried about getting everything off my hard drive. I was able to remove the files I wanted but then when I put back in the disk to do the install I had to do the option where it would erase everything on the disk.
    So that is why I'm confused as to why it is saying I can't put ILife on leopard.
    It seems like everything should be ready to go.
    Would it make a difference if I'm using my twin brother's installation disk instead of mine? I never thought of that until now but our disks are all in one spot and I could have grabbed his but I doubt that's the problem.

  • How to register bundled software MBP?

    Can any body tell me how to rwgister the bundled software that came in the application DVD with my new Mac Book Pro? I mean, there is no serial number on the paper sleeves that contained the DVDs, or at least, I didn't see any.

    Hi Michael
    This is the normal procedure when one buys software and you're furnished with a serial number. However, in my case at least, I received the 2 DVDs with my Mac Book Pro, one being the installation disk, the other being the one with the software bundle, labelled the "Application Install Disk". I couldn't find a serial number anywhere. However, I checked the apple site again, and after some digging, found the answer to be the following: the software gets automatically registered onc a new buyer registers his new computer. Anyway, we'll see how true that is when I need to purchase an upgrade.
    Thanks anyway for your feedback and have a nice weekend.

  • Buying bundled software

    If I buy bundled software such as final cut pro x with my new iMac will I have the ability to redownload it in the future from the App Store for free on another authorized Mac computer or will I have to repurchase it?

    BBundled by whom? If you mean a computer purchased from Apple with the software pre-installed, then absolutely, as mende1 said. If you mean bundled on a computer that was previously owned and sold by a third party, then no. You'll need to buy your own copy of FCP.

  • New hard drive just fitted ,shop loaded snow leopard 10.6.8 ,read on here i could retreive iphoto by installing bundled software on original install disk,just says cannot load on this computer why? please!

    new hardrive just fitted by shop ,they loaded leopard 10.6.8.
    i read on here that i could reinstall iphoto by going to install
    bundled software on original install disk .
    it will not let me install bundled software on this computer
    any ideas why??
    thanks fo yo support

    No
    What hppens? what does not happen? what version of iPhoto did you have? What error messages do you get?
    LN

  • Problem installing officejet pro 6830 software on my iMac running Snow Leopard

    Greetings, I have a problem installing officejet pro 6830 software on my iMac running Snow Leopard.  When I insert the HP software disc onto my iMac, and go to the HP website, it says:
    "403" Ooops!  Request forbidden...
    Any possible solutions to this?  Thanks for any feedback...

    Hi @RNOjetnow ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue with needing the drivers for the 10.6 Snow Leopard OS.  You should be able to install the Apple Drivers just by connecting the USB cable.
    Here is a document that might help.
    Hope this helps you install the drivers.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Can't install OS X bundled software on external drive

    I am building a bootable external hard drive. I installed the operating system (Snow Leopard) successfully using the computer specific installation disc that came with the system. However, when I have attempted to installed the bundled software (i.e. Garageband, iMovie, etc.) I get an installation failed message just describing an unknown reason.
    Does the hard drive have to be the main drive for this bundled software package? That would not make sense because you can get the OS on an external drive and one objective for doing it is to have a fully working clean installation available to utilize.
    "The Installation Failed
    An unknown installation error occurred.
    The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance,"

    The operating system boots from the drive without any problem.
    The formatting is GUID & Extended Journaled.
    I tried making a disk image and received the same error.
    I ended up searching my main system drive for all related files for each program installed and manually duplicating the folder structure then copy/pasting the files in the external drive. I was successful in getting everything to run off the new drive.
    It is frustrating that an answer to this problem does not pop up online after a search. It has to be a common problem when people attempt to create a bootable external drive loaded with software.
    FWIW, I did not want to do any sort of cloning. I wanted a fresh installation. Fortunately the software from the bundle that is currently installed on my original main drive is healthy as far as I know. If I needed a fresh installation of it I would not have been able to use this approach.

  • Error 1310 on trying to install Adobe Acrobat X Pro.  Software will not install.

    In trying to install Adobe Acrobat X Pro from either a purchased DVD or from an Adobe download I get an Error message: Error 1310 and the installation will nor proceed.  It asks to verify access to C:\Program Data\Adobe\ Adobe PDF\Distiller\Startup\example.ps.  This complete directory is present in my C:\ drive.  How do I verify this access and what must be done to successfully install Acrobat X Pro?

    don't use email.
    open your thread in a browser, Re: Error 1310 on trying to install Adobe Acrobat X Pro.  Software will not install.
    and click the camera icon to insert an image.

  • How much Ram do I need in a MacBook Pro for Software Engineering?

    I plan to buy a new MacBook Pro in the next month for school and hopefully for work. I would like this computer to get me at least 4 years of use. I will be majoring in software engineering. My question is how much ram would I need in a Macbook Pro for software engineering? I am currenty looking at the 15" 2.3ghz base model with 8gb of ram as well as the 15" 2.4ghz base model retina. I really like the retina but its at my max budget. Will the 8gb of ram be enough since it is not upgradable? Any help will be greatly appreciated.

    I am currenty looking at the 15" 2.3ghz base model with 8gb of ram
    The MB Pro 15" 2.3Ghz with 8GB of RAM should do the trick.
    Save your $$$ on the retina and stick to your budget 

  • Final Cut Pro X - software update issues

    Hi,
    I’m trying to update my Final Cut Pro X software on my Mac and I keep getting the following error message:
    An error has occurred.
    The operation couldn’t be completed
    (NSURLErrorDomain error – 1102.)(102)
    Does anyone know what this means? And, how can I resolve it?  I can’t export my projects out of Final Cut Pro either and keep receiving the error message (error -1); which I think is related to the software needing an update.
    Any help is much appreciated!
    Thanks,
    Alicia

    that error code in human language means 'no read permission'
    Are you logged-in with your Account, you purchased the installed version of FCPX with?
    Are you using a purchased version or the trial version?

  • Since I updated my MacBook Pro system software yesterday (10.8.5) my LACIE backup won't work - says it's "read only"

    Since I updated my MacBook Pro system software yesterday (10.8.5) my LACIE backup won't work - says it's "read only"

    What type of backup TM, clone, other?
    Get Info (command-i) on your backup volume, under Sharing & Permissions be sure Ignore Ownereship is not checked marked. Here's what I get for a clone...
    And like this for a TM backup volume...

  • I'm running iTunes 10.5 on my Macbook Pro and software 4.1 on my 2g iPod touch and having problems getting photo's to sync. Same error iPod can't be synced req'd file can't be found. Tried deleting the photo cache, restoring the iPod etc but to no avail.

    I'm running iTunes 10.5 on my Macbook Pro and software 4.1 on my 2g iPod touch and having problems getting photo's to sync. Same error, "iPod can't be synced req'd file can't be found". Tried deleting the photo cache, restoring the iPod etc but to no avail.

    Try here:
    iTunes: Unable to sync photos
    Usually deleting the iPod Photo Cache Folder works. Note that if you sync via the folder method, make sure you dlete all the ifolders since :
    The iPod Photo Cache stores the photos that are optimized for display on your iPod, iPad, or iPhone. The location of this folder depends on the syncing options you select. In iTunes, if you change the selection in the “Sync Photos From” pop-up menu, a new iPod Photo Cache folder will be created (and the previous folder will remain).

  • What is license count of installing or use O365 Pro plus software per user for Bussiness

    Hi  All,
    Today in our office given demo of Office 365 usages and license details , but i am little bit confused on licensing.
    They told we can use Office 365 Pro Plus software into 15 Device ( 5 Windows PC + 5 MAC + 5 Mobile or Tablets).
    I refereed this below link as well
    http://products.office.com/en-us/business/office-365-proplus-business-software
    [Enjoy a consistent and familiar Office experience across PCs, Macs, Windows tablets, iPads®, and most mobile devices.
    Each user can install Office on 5 PCs or Macs, 5 Windows tablets or iPads, and 5 phones.]
    Is anyone confirm this is true,  is  Microsoft increased the license count of 5 (it could be any devices, at max we can use my O365 ID 5 times to install and activate) to 15.
    and this from FAQ session: 
    What is Office 365 Pro Plus?
    Office 365 ProPlus is one of the subscription service plans in the new Office. It is productivity software (including Word, PowerPoint, Excel, Outlook, OneNote, Publisher, Access, and Lync) that is installed on your desktop or laptop computer. Office 365
    ProPlus is a user-based service that allows people to access Office experiences on up to 5 PCs or Macs and on their mobile devices. Traditional Office installations were tied to the computers they were installed on. Office 365 ProPlus enables flexible new
    deployment options that IT and/or individual users can choose from to install Office.
    Thanks,
    Thanks & Regards, Kesa_Kara

    Hi,
    Based on my knowledge, it's not 5 Windows PC + 5 MAC but 5 Windows PC or 5 MAC. To confirm the information, you can contact the customer service:
    http://support2.microsoft.com/gp/customer-service-phone-numbers/en-us
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Bundled software for 10.4, no install disks

    I am currently living abroad in China, and have left my install disks back in the states. My computer had crashed and was serviced under warranty, receiving a new hard drive, when it was returned for me it had not been installed with all the bundled software, such as iphoto.... Is there anyway I can get these programs without having to have a friend search my house for the disks and mail them out to me?

    Yes I have considered that, but unfortuneatly they do not speak English and my Chinese is not all that great. My roommate has a powerbook G4 but unfortuneatly because mine is a 12 inch his disks wont work, his computer is a 15 inch which disks work for both the 15 and 17 inch. Perhaps I will be able to find someone out here with a 12 inch

  • ImageClass MF5770 with PageManager Vs 6.03 bundled software.

    I have an ImageClass MF5770  multifunction machine with NewSoft PageManager Vs 6.03 as bundled software. Lately, this software will not open and displays an error message of  "Failed to create empty document". I have contacted Canon by eMail and today by live discussion on the phone. I have also contacted NewSoft but due to its age, NewSoft will not help. The call to  Canon Live Support today simply told me that there is nothing that can be done. How can a reputable firm sell and deliver a product that suddenly stops working and then tells the customer that nothing can be done to repair it? Has anybody else have this problem and if so, how to repair it? 

    I have an ImageClass MF5770  multifunction machine with NewSoft PageManager Vs 6.03 as bundled software. Lately, this software will not open and displays an error message of  "Failed to create empty document". I have contacted Canon by eMail and today by live discussion on the phone. I have also contacted NewSoft but due to its age, NewSoft will not help. The call to  Canon Live Support today simply told me that there is nothing that can be done. How can a reputable firm sell and deliver a product that suddenly stops working and then tells the customer that nothing can be done to repair it? Has anybody else have this problem and if so, how to repair it? 

Maybe you are looking for