NX8600GTS T2D256EZ NO HDMI Signal Single Monitor

The above card refuses to work correctly with an LCD TV using a DVI to HDMI connector, it will not display anything using it as a single display and requires going into windows to move the display across to get it working. The adaptor, cable and TV settings are fine as they have been tested with another DVI graphics card. The card is running the latest BIOS and Drivers as installed by MSI live update.
Am I missing something???

Both DVI ports checked still no signal, is this a symptom of a faulty card?

Similar Messages

GTX 760 No HDMI Signal to Monitor

So the other day I was playing Arma 3 and all of a sudden I noticed my frames started to drop about 4fps every 5 secs until it was 2 fps where the game then crashed and a windows message popped up saying my graphics driver crashed I then proceeded to restart my PC and it could no longer get a HDMI signal. I recently just built this last sunday. 28/12/14. Whenever I boot it up now the fans turn on including GPU ones but the motherboard shows the debug codes D6 and 92.
Specs: Motherboard: MSI Gaming 5 Z97 LG1150, CPU: i7-4790k, GPU: GTX 760 Twin Frozr 2GB VRAM, RAM: Corsair Vengeance Pro 16GB (2x8GB) 1866MHZ, Storage: 2TB Seagate 7200RPM and a 120GB Kingston SSD- OS on this!, OS: Windows 8.1 Enterprise, Monitor: Asus NV247 PSU: Cooler Master B700 700w
Any suggestions on what to do?

Hi,
Did you try to reset CMOS? >>Clear CMOS Guide<<
Also did you have a chance to watch the temps of the GPU? There is slight possibility it was badly made or screws not properly screwed in and heatsink didn't make enough contact so GPU burnt itself.
What about different video ports?
Did you consider running the system out of the case on non conductive surface (e.g. wooden table or motherboard box) with single RAM stick?
Does your system POST and work normally if you take the GPU out?
Also try your graphics card in different computer if possible. Else speak to a friend or local IT services (or shop you got it from) and ask for testing in their system.

Mac mini late 2012, hdmi to Samsung Monitor no signal

mac mini late 2012, OS X ver. 10.9.2, hdmi to Samsung Monitor (S22C300) no signal,
but thunderbolt to hdmi adaptor can work, any fix for hdmi issue?

It would seem that if the Samsung monitor is not waking from sleep, then Samsung has not properly implemented the Wake on Signal that the Mini is sending out. There is nothing unique that Apple would do for one manufacturer. The signal is being sent out and that is why other monitors wake. Your Samsung, and mine, which are both probably different models are not waking when requested by the Mini. The best that can be done is to set the Energy Saving System Preference to not put the monitor to sleep. Use the Screen Saver as desired.

Use of HDMI (HDCP enabled) Monitor with MacBook

Hi
I’ve been searching the discussion boards to try and answer this but as I haven’t been able to get a definitive answer I will post my own thread (with apologies if I’ve missed a previous response that covers this)…
I am about to purchase one of the new HP w2408h monitors which has VGA and HDMI (with HDCP) inputs:
http://h10010.www1.hp.com/wwpc/uk/en/ho/WF05a/20491-314293-314303-314303-314303- 80644319.html
My concern is that the HDCP will cause an issue when using this with my Macbook. The posts I’ve read so far talk about issues with TVs rather than monitors – does this make a difference?
I would expect to be able to utilise the full 1920 x 1200 resolution, will this be possible?
My plan is to use a DVI to HDMI cable via a mini DVI to DVI adaptor if this will do the job (as a fallback I could use VGA connections, but would much prefer to use the digital signal).
Thanks in anticipation.

OK, so I bit the bullet and ordered the monitor (HP had assured me it would work OK).
Most importantly it does work, exactly as I wanted it to (MacBook recognised it immediately).
In summary, the MacBook is connected via a DVI adaptor to a DVI to HDMI cable. I'm then passing the cable through a passive HDMI switching box (also connected to a PC) which is connected (via HDMI to HDMI) to the monitor.
I'm using the MacBook in Extended Desktop mode with the external monitor running in its native 1920 by 1200 resolution - it looks great.
I am able to flick between the MacBook and a PC using the switching box. When in PC display mode, the MacBook reverts to single screen mode.
I am not using any HDCP encoding (as far as I know).
Hope this info is of use.

Z97M GAMING no hdmi signal with DVI converter

My monitor has VGA/DVI only (Samsung SyncMaster 213T), I have a HDMI to DVI converter in the DVI port, this works with the HDMI out from my laptop.
Am putting together a Z97M/4790K rig. I get no signal at the monitor from the Z97M's HDMI out, if I connect it to a TV I do get a signal.
Am using the same (short) HDMI cable and adaptor with both the laptop and the new Z79M, used the same cable to connect the Z79M to the TV.
So the cable and converter are good (they work with the laptop) and the Z79M HDMI port and cable are good with the TV.
Anyone have any idea why the Z97M HDMI output wont display on my monitor? (Any bios settings to make the HDMI signal more compatable?)

Yes, to be clear, there is no GPU. When I say the Z97M's HDMI out I mean the output from the Z97M motherboard. I have tried it with a second screen, the TV (it worked).
Logically one of two things must be happening... either the Z97M's HDMI signal isn't making it through the DVI/HDMI adaptor (when the laptop's signal is), or the monitor cannot process the Z97M's HDMI signal (when it can process the laptop's).
HDMI and DVI signals are the same, so the adaptor is just a plug converter ('square plug in round hole') and unlikely to be the issue, especially as it works with the laptop.
But both the monitor and laptop (which work together with HDMI and the DVI converter) are >5 years old. The Z97M is very new and could be it's HDMI output just isn't compatable in some way with the (relatively) old monitor.
Hence am wondering (for example) if there are any Z97M bios settings which might make it talk nicely to the old monitor.
Be interested to hear if anyone has had issues (or even success!) using the HDMI out with DVI monitors, especially old Samsung SyncMasters ?

HDMI signal IN imac

a friend of mine that is interested on a iMac 24 wants to know how can send the Playstation 3 HDMI signal on the iMac monitor... any idea?

The iMac has no video input of any kind.
You would need some type of device like the ones elgato.com makes. Even then I don't know if there are any available which accept HDMI signals.

GeForce NX8600GTS-T2D256EZ, Very High Temp; should I be concerned?

Hello,
I have the MSI GeForce 8600 GTS NX8600GTS-T2D256EZ-HD. I just opened the case and realized it runs really hot; I can barely touch the copper pipes or the aluminum heat sink. I have a Silenex Fan right under it and some air flows over the surfaces. For reference, the 975X chips/heat sinks are near room temp.
Anyone notice this issue? Should I be concerned about a video card in the computer that run this hot? If so, any suggestions for cooling? I have P182 case and 5 fans.
Scott

Quote from: jsmartin22 on 15-July-07, 13:41:39
Had no idea what these were, but searched/read. Downloaded & installed Nvidia Ntune, which added features to the control panel, including temp monitoring. GPU Temp is 48c, and I can't imagine that is an issue, right?
Thx for the good suggestion; I appreciate it!
Scott
nop, GPU can running very hot without to worry about. 80-90C underload temp can be expected.
if you don't have real issues don't worry about the temp.

Since update download monitor shows "No Signal" and "Monitor Going to Sleep" over and over

I have an HP w2072a Monitor and a Pavillion p7-1436s computer. I run Windows 8. Since downloading an update yesterday, I cannot get my monitor to work. I have unplugged it, plugged it in, tried another monitor, tried another cable, turned the computer off and on several times, played with the sleep button, tried all the buttons on the monitor--nothing works. If I hit the "On" button, the light turns to blue briefly, I get the screen showing "No signal" then "Monitor Going to Sleep" comes up and the light turns amber---over and over again. Could this be related to the update I received? I think the update said it was setting a restore point, but with no monitor, I am stuck!

Hi dianthus,
Sorry to hear about the issue after doing the update. Do you recall what the update was for? I have included a document regarding your issue.
Computer Starts but Monitor Remains Blank Windows 8:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03518095&tmp_task=solveCategory&cc=us&dlc=en&la...
Give those step a try and let me know how it goes.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Hello everyone, I would like to know if a retina display macbook 15 "there is a way to connect 2 monitors full hd and use it as if it were a single monitor with a resolution of 3840x1080. Thanks

Hello everyone, I bought a macbook retina 15 "display.'ve Connected 2 full hd 1920x1080 monitor as extended desktop, if I cast two movies I can see them on the second monitor, but if I wanted to launch 3840x1080 1 movie how do I watch on two monitors side by side ? same thing if I wanted to work on both monitors as if it were a single monitor with a resolution of 3840x1080. I hope for your reply, sorry for my English, I used a translator. Thanks

If you have used the Displays system preference to arrange the monitors next to each other, you should be able to stretch a movie player window across both monitors.
I do not think there is a way to show the movie full screen across both monitors, because full screen usually takes over just one monitor.

Is a ATI Radeon X1900XT (512 MB) card enough to drive a single monitor for video editing

My son just given an older mac pro.
2 x 3 GHZ Quad Intel Xeon.
OSX Lion
The video card installed is an ATI Radeon X1900XT (512 MB)
Is this video card sufficient to drive a single monitor for video editing and basic graphics work in PhotoShop, etc?
Many thanks.

nothing I guess
Just noticed that you can add emoticons to these posts.

Capturing HDMI signal to MacBook Pro for editing in FCP

I have a ton of old home-recorded VHS tapes that I'm hoping to capture to FCP editable QT files. I'm considering purchasing a Panasonic BluRay/VHS combi deck, the DMP-BD70V, because it supposedly upscales old VHS tapes for display through the HDMI cable output. My question is, will I be able to feed the digital output of the HDMI cable directly into my MacBook Pro 15" (vintage September 2007) laptop, or will I still need some sort of card to make the HDMI signal palpable to my computer?

The short answer is - not unless you are willing to fork over $600+ for the necessary converter. Probably the least expensive such converter is the Canopus ADVC-HD50, which can convert the HDMI signal to HDV and feed it to your Mac via FireWire. Something to consider is that you will be going through multiple conversions this way - VHS -> upscaling to hidef via HDMI -> conversion to HDV -> possible conversion to AIC or ProRes. IMHO not a great workflow, as it's likely to degrade the quality to a noticeable degree, especially that upscaling step.
Something to consider - the quality is limited by the original VHS tape & recording. Even DV is significantly higher quality than VHS. You will be better off converting directly from the analog VHS to DV using a Canopus ADVC-110 or 300 or similar analog-DV converter.

Apple TV starts, and then TV loses HDMI signal

I moved my ATV 2 from a newer 1080 HDTV to an older 720 tv, and now the ATV starts and displays apple logo and after 30-45 secs I get a message on the tv that the hdmi signal is not detected.
I suspect that the ATV is sending a 1080 signal that the tv can't use, is there a way to reset resolution or to defaults via remote?
Is it something else?

I ended up reconnecting the ATV2 to the original TV and had to change the resolution to 480. I was then able to see the main screen, and change the res to 720p 60mhz.
It is odd though, the ATV was set to Auto for screen, and displayed during startup, but was unable to display main screen.

No HDMI signal from apple tv

I recently purchased an ATV (in the USA - I live in Europe) and I notice that ATV doesn't seem to 'connect' to my TV, ie. the tv consistently shows 'no HDMI signal', or will sometimes show part of the relevant ATV menu screen momentarily and then disappear. The remedy is to reboot ATV or disconnect and reconnect the power cable. Does anyone have a remedy for this?

I have the same issue. My Apple TV works when I reboot (unplug/replug) it. But if I attempt to change the resolution, put it on standby, or if I switch to another device and return to it later, I get an intermittent signal. Every few 4-5 seconds the menu/screensaver appears and disappears pretty quickly. If I reboot and watch a movie immediately it works fine.
My TV is a Olevia 542i LCD HDTV.
http://www.olevia.com/en-us/Products/5Series/542iLCDHDTV.aspx
Anyone have any ideas? Could the AppleTV be defective?
Message was edited by: kdizza

MacBook Pro 15" losing HDMI signal intermittently

MacBook Pro 15" Late 2011 (Mavericks 10.9.4); 4 GB ram. I am running HDMI to a new video projector. The HDMI signal is lost periodically for about 1-2 seconds and then comes back. It occurs about every 5-7 minutes (about 20 times during a 50 minute lecture). It loses both video and audio. Screen goes black but no displayed messages. I have read a variety of other posts with similar symptoms with various computers (e.g. Mac mini) and even with DVI cable use. In my case, I've used two different HDMI adaptors so it's not the adaptor. I'm pretty sure it's not the HDMI cable itself. (A fellow professor does not have the issue with his PC and he uses the same equipment.) Neither the computer nor the cable is touched. (I have another colleague who reports the same symptoms in his music lab.) Bottom line is that it's a distraction to my students and it's occurring off different Macs in different locations. This means to me that it may be something with the particular generation of Macs we're using. Looking for help to resolve the issue.

Assuming this is your machine - MacBook Pro (15-inch, Late 2011) - Technical Specifications you are using a DisplayPort (from the Thunderbolt/DP port) to an HDMI adapter. Non-Apple adapters have issues.
The other factor is that there are GPU issues with the AMD - problems with amd gpu on early 2011 macbook pro (there are many threads like this).
Either issue may be impacting your Mac connectivity. The third-party adapters may not be able to drive signals consistently.
Can you test with an Apple-branded DP-to-HDMI adapter and the 50' cable?

Mac dropping signal to monitor.

dropped signal to monitor a few times now in a few days.
have to have to do a force re boot because cant see anything...mac still on ,can see caps lock lit and mouse lit...ta.

having the same problem , has anyone of you guys found a solution yet?

NX8600GTS T2D256EZ NO HDMI Signal Single Monitor

Similar Messages

Maybe you are looking for