O-Cluster Errror Messages

Hello,
Out team is running the O-Cluster algorithm in ODM (10G R2). During training, we are getting the following error message. Our models train using the K-Means algorithm and we can train small, trivial models using O-Cluster, but something about our data, I'm assuming, it doesn't like:
ORA-40101: Data Mining System Error ODM_OC_CLUSTERING_MODEL-BUILD_OC.build_ocluster--20010
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "DMSYS.ODM_OC_CLUSTERING_MODEL", line 122
ORA-06512: at "DMSYS.ODM_OC_CLUSTERING_MODEL", line 2408
ORA-40101: Data Mining System Error ODM_OC_CLUSTERING_MODEL-BUILD_OC.ocluster--20010
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "DMSYS.ODM_OC_CLUSTERING_MODEL", line 122
ORA-06512: at "DMSYS.ODM_OC_CLUSTERING_MODEL", line 2312
ORA-06500: PL/SQL:
Any ideas?
Thanks,
Chad

Hi Chad,
Sorry but there is not enough to go on with the error message.
Are you running ODM 10.2.0.3?
Did you invoke model build using ODMr?
We might need to have a test case to run to understand why the failure is taking place.
Have you ever worked with Oracle Support to file a problem report.
They provide a means for development to access data from a client.
Thanks, Mark

Similar Messages

When trying to set up an email account I keep receiving ssl errror message. Any advice please.

When trying to set up an email account I keep receiving ssl errror message. Any advice please.

Error is: Cannot connect using SSL. Do you want to try setting up the account without SSL?
Answer: Yes
Then "Verifying" appears at top of screen but nothing happens.
Tiscali/Talk Talk is the provider.

Compressor Cluster - Error message when attaching .scc caption files

Hello,
We have a 3 XServer Cluster controlled by a 4'th XServer (Our FCServer machine). My workflow is:
Source Video: 1920X1080 ProRes Video (28:30min)
Resized to 640X360 ProRes LT (also de interlaced and some black restore and sharpening applied here)
Encoded 640X360 to H.264 at 750Kb.Sec - .scc files defines in "Additional Information" tab in Compressor at this point.
This job is submitted to the cluster. My submitting machine as well as all cluster machines are all connected to the same fiber network. All files are on the same XSAN.
I am getting the following error message. I get it after it has tried to encode the video:
Status: Failed - 5x HOST [fcsqm2.local] error: Failed to add CC to movie: -50
note: fcsqm2 is one of the encoding machines in the cluster.
I can't seem to find any answers via google. Anyone got any suggestions where I can look? Any ideas?
Thanks a lot!
Nathan

{Ctrl + Shft + J} - any messages in the Error Console, relating to that?

Cluster heartbeat message in Coherence 3.6

Hi,
We recently upgraded to Coherence 3.6 in our production environment. Occasionally in the Coherence cluster, I see the following happening.
2010-08-18 18:27:48.953/28.828 Oracle Coherence GE 3.6.0.0 <Error> (thread=Cluster, member=13): Received cluster heartbeat from the senior Member(Id=1, Timestamp=2010-08-18 18:03:43.927, Address=10.31.151.246:9000, MachineId=33526, Location=site:xxx.com,machine:machine1,process:2665,member:coherence_cache_server-0, Role=cache-server) that does not contain this Member(Id=13, Timestamp=2010-08-18 18:25:20.158, Address=10.30.71.60:8092, MachineId=21308, Location=site:xxx.com,machine:machine2,process:3540,member:CoherenceCommandLineTool, Role=cache-client); stopping cluster service.
Whenever any node for ex: coherence cmd line tries to join the cluster it gets kicked out of the cluster immediately. Nodes on the cluster keep exiting the cluster and joining back. This happens constantly. pasting another log snippet.
2010-08-18 14:23:22.458/-13596.00-214 Oracle Coherence GE 3.6.0.0 <D5> (thread=Cluster, member=7): Member 5 joined Service Management with senior member 1
2010-08-18 14:23:36.110/-13582.00-562 Oracle Coherence GE 3.6.0.0 <D5> (thread=Cluster, member=7): Member 5 joined Service DistributedCache with senior member 1
2010-08-18 14:23:37.811/-13580.00-861 Oracle Coherence GE 3.6.0.0 <D5> (thread=Cluster, member=7): MemberLeft notification for Member(Id=5, Timestamp=2010-08-18 14:23:25.924, Address=10.30.71.60:8092, MachineId=21308, Location=site:xxx.com,machine:machine2,process:5936,member:CoherenceCommandLineTool, Role=cache-client, PublisherSuccessRate=0.9166, ReceiverSuccessRate=1.0, PauseRate=0.0, Threshold=1976, Paused=false, Deferring=false, OutstandingPackets=0, DeferredPackets=0, ReadyPackets=0, LastIn=845ms, LastOut=854ms, LastSlow=n/a) received from Member(Id=2, Timestamp=2010-08-18 12:34:15.068, Address=10.31.151.246:9001, MachineId=33526, Location=site:xxx.com,machine:machine1,process:2667,member:coherence_cache_server-1, Role=cache-server, PublisherSuccessRate=0.8568, ReceiverSuccessRate=0.5934, PauseRate=0.0021, Threshold=1878, Paused=false, Deferring=false, OutstandingPackets=0, DeferredPackets=0, ReadyPackets=0, LastIn=24744ms, LastOut=24753ms, LastSlow=n/a)
2010-08-18 14:23:37.811/-13580.00-861 Oracle Coherence GE 3.6.0.0 <D5> (thread=Cluster, member=7): Member 5 left service Management with senior member 1
2010-08-18 14:23:37.811/-13580.00-860 Oracle Coherence GE 3.6.0.0 <D5> (thread=Cluster, member=7): Member 5 left service DistributedCache with senior member 1
Just to give a brief background on our environment, we have 3 linux hosts configured to form the cluster. 2 of them have 2 cache server nodes on each= total of 4 cache server's in the cluster, with about 7 storage disabled client nodes.
Any clues as to why this is happening with cluster? Do we need to configure anything on the cluster? We have all the ports on which the nodes communicate, opened up for udp-tcp/input-output.
Appreciate all help on this.
-Chandini

Here is the log snippet on member 2 for around the same timestamp when member 5 was removed
2010-08-18 14:23:26.269/6588.113 Oracle Coherence GE 3.6.0.0 <D5> (thread=Cluster, member=2): Member 5 joined Service Management with senior member 1
2010-08-18 14:23:39.922/6601.766 Oracle Coherence GE 3.6.0.0 <D5> (thread=Cluster, member=2): Member 5 joined Service DistributedCache with senior member 1
2010-08-18 14:23:41.607/6603.451 Oracle Coherence GE 3.6.0.0 <Warning> (thread=Cluster, member=2): Failed to reach address /10.30.71.60 within the IpMonitor timeout. Members [Member(Id=5, Timestamp=2010-08-18 14:23:25.924, Address=10.30.71.60:8092, MachineId=21308, Location=site:xxx.com,machine:machine2,process:5936,member:CoherenceCommandLineTool, Role=cache-client)] are suspect.
2010-08-18 14:23:41.608/6603.452 Oracle Coherence GE 3.6.0.0 <Warning> (thread=Cluster, member=2): Timed-out members MemberSet(Size=1, BitSetCount=2
Member(Id=5, Timestamp=2010-08-18 14:23:25.924, Address=10.30.71.60:8092, MachineId=21308, Location=site:xxx.com,machine:machine2,process:5936,member:CoherenceCommandLineTool, Role=cache-client)
) will be removed.
2010-08-18 14:23:41.608/6603.452 Oracle Coherence GE 3.6.0.0 <D5> (thread=Cluster, member=2): Member 5 left service Management with senior member 1
2010-08-18 14:23:41.609/6603.453 Oracle Coherence GE 3.6.0.0 <D5> (thread=Cluster, member=2): Member 5 left service DistributedCache with senior member 1
I will work on getting the logs on the other members for the first message and post it here.
Thanks.

Cluster error message ????

I am running 2 WL servers in a cluster on two separate SUN Solaris
          machines not using a shared file system and using NES plugin. The
          properties file are exactly the same. The cluster comes up ok. I am
          using a simple counter servlet to test the clustering. First time the
          primary server updates seconday just fine.
          I take the primary down and reload the servlet a few times. Things work
          fine with the message
          <RepMan> updateSecondary called on unpaired primary
          Then I bring back the primary server that I had killed. Try to reload
          the servlet. I get the following messages
          "<RepMan> getRepMan unable to obtain ReplicationManager (for
          id+ipaddress - where id is WL generated appended to IP of the machine).
          .[7001,7001,7002,7002,-1] " in the new primary server.
          "Unable to to create secondary for (id - WL generated id for the
          server)"
          Has anyone come across these messages in their logs when running a WL
          cluster (http session) on separate boxes w/o a shared file system???
          I have tested multicast and seems to be ok for both machines. I have
          added 3rd machine in cluster and I still get the same results.


Prasad,
          I did not see any comments on in-memory replication related issues in SP7.
          Do you have any information on when should we expect a service pack dealing
          with these issues.
          Thanks
          Vlad
          Prasad Peddada wrote:
          > This has been identified as a bug. We will fix this in the next service
          > pack.
          >
          > -- Prasad
          >
          > Junaid Hossain wrote:
          >
          > > I am running 2 WL servers in a cluster on two separate SUN Solaris
          > > machines not using a shared file system and using NES plugin. The
          > > properties file are exactly the same. The cluster comes up ok. I am
          > > using a simple counter servlet to test the clustering. First time the
          > > primary server updates seconday just fine.
          > > I take the primary down and reload the servlet a few times. Things work
          > > fine with the message
          > > <RepMan> updateSecondary called on unpaired primary
          > >
          > > Then I bring back the primary server that I had killed. Try to reload
          > > the servlet. I get the following messages
          > > "<RepMan> getRepMan unable to obtain ReplicationManager (for
          > > id+ipaddress - where id is WL generated appended to IP of the machine).
          > > .[7001,7001,7002,7002,-1] " in the new primary server.
          > >
          > > "Unable to to create secondary for (id - WL generated id for the
          > > server)"
          > >
          > > Has anyone come across these messages in their logs when running a WL
          > > cluster (http session) on separate boxes w/o a shared file system???
          > > I have tested multicast and seems to be ok for both machines. I have
          > > added 3rd machine in cluster and I still get the same results.
          [vlad.vcf]

Compressor 3 "no cluster found" message - EASY FIX

Greetings,
I have had to install compressor 3 times before I finally found this easy fix. In my case Compressor would stop working when a video would get "stuck" in the batch and just go on forever. From then on the batch would always say "no cluster found", and if I tried to submit a batch it would say something like cluster no found.
So how did I fix it without the dreaded delete everything and reinstall? I saw a post that said to check that your sharing name matches your cluster name in the qmaster system preferences. They did not exactly match. The name in sharing was "My Mac" and the name in qmaster was "My Mac Cluster" I changed it to match the sharing "My Mac" and hit the start sharing button. I reset my Mac (no sure if that's needed) and then opened the batch monitor. Instead of "no cluster found" it now said "My Mac" and when I submitted a batch in compressor the "This Computer" showed up again, and it stared working again!
Not sure if this works in all cases. But I hope this post helps someone else from having to reinstall everything, AND maybe apple can read this to help figure out what the problem is with their software.

i had the usual "no clusters found" in batch monitor, and "this computer" did not appear in batch monitor. so, when trying to submit a batch from compressor, i got the "unable to submit batch / retart your computer" error message.
so for 2 days i tried really EVERY METHOD i found in all blogs, threads, posts, discussion forums to remove / reinstall / make work compressor.
here what i tried:
fcs remover.app / completely reinstall fcp from scratch
(http://www.digitalrebellion.com/fcs_remover.htm)
partially delete / reinstall compressor / qmaster only via standard install
(http://docs.info.apple.com/article.html?artnum=302845)
partially delete / reinstall compressor / qmaster only via pacifist install
http://www.scottsimmons.tv/blog/2008/01/11/compressor-hatred-resolved/
http://www.charlessoft.com/
NOTHING WORKED. before completely re-installing my entire OS, i found this post here AND IT WORKS - at leat on my machine
i hope this will save some of you sleepless nights
regards
ivan

Unicast cluster - heartbeat message failure messages

Using unicast messaging mode and i see following messages
####<Jul 9, 2010 12:46:56 AM PDT> <Info> <Cluster> <anaeur30> <WL10MP2-ServiceSTServer6> <[ACTIVE] ExecuteThread: '45'
for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1278661616559> <BEA-000112> <Removing WL10M
P2-ServiceSTServer1 jvmid:6806396782256322086S:anaeur10:[7033,7033,-1,-1,-1,-1,-1]:anaeur10:7033,anaeur10:7035,anaeur2
0:7033,anaeur20:7035,anaeur30:7033,anaeur30:7035,anaeur50:7033,anaeur50:7035:WL10MP2-ServiceTier:WL10MP2-ServiceSTServ
er1 from cluster view due to timeout.>
####<Jul 9, 2010 12:55:36 AM PDT> <Info> <Cluster> <anaeur30> <WL10MP2-ServiceSTServer6> <[ACTIVE] ExecuteThread: '34'
for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1278662136552> <BEA-000112> <Removing WL10M
P2-ServiceSTServer2 jvmid:-2694311272134716565S:anaeur10:[7035,7035,-1,-1,-1,-1,-1]:anaeur10:7033,anaeur10:7035,anaeur
20:7033,anaeur20:7035,anaeur30:7033,anaeur30:7035,anaeur50:7033,anaeur50:7035:WL10MP2-ServiceTier:WL10MP2-ServiceSTSer
ver2 from cluster view due to timeout.>
During the same time frame, I see lost multicast messages on all the instances for a about 20 minutes. What could be the problem? Why am i seeing the multicast messages when using uncast? My config.xml has multicast related entries for each server but how will that be effective? is that an issue? we see servers dropping out frequently from cluster.
000115> <Lost 1 multicast message(s).>
####<Jul 9, 2010 12:46:42 AM PDT> <Info> <Cluster> <anaeur10> <WL10MP2-ServiceSTServer2> <weblogic.cluster.MessageReceiver> <<WLS Kernel>> <> <> <1278661602751> <BEA-000115> <Lost 1 multicast message(s).>
####<Jul 9, 2010 12:46:46 AM PDT> <Info> <Cluster> <anaeur10> <WL10MP2-ServiceSTServer2> <weblogic.cluster.MessageReceiver> <<WLS Kernel>> <> <> <1278661606548> <BEA-000115> <Lost 2 multicast message(s).>
####<Jul 9, 2010 12:47:04 AM PDT> <Info> <Cluster> <anaeur10> <WL10MP2-ServiceSTServer2> <weblogic.cluster.MessageReceiver> <<WLS Kernel>> <> <> <1278661624185> <BEA-000115> <Lost 2 multicast message(s).>
####<Jul 9, 2010 12:48:40 AM PDT> <Info> <Cluster> <anaeur10> <WL10MP2-ServiceSTServer2> <weblogic.cluster.MessageReceiver> <<WLS Kernel>> <> <> <1278661720809> <BEA-000115> <Lost 2 multicast message(s).>
####<Jul 9, 2010 12:54:14 AM PDT> <Info> <Cluster> <anaeur10> <WL10MP2-ServiceSTServer2> <weblogic.cluster.MessageReceiver> <<WLS Kernel>> <> <> <1278662054823> <BEA-000115> <Lost 2 multicast message(s).>
####<Jul 9, 2010 12:54:14 AM PDT> <Info> <Cluster> <anaeur10> <WL10MP2-ServiceSTServer2> <weblogic.cluster.MessageReceiver> <<WLS Kernel>> <> <> <1278662054827> <BEA-000115> <Lost 1 multicast message(s).>
####<Jul 9, 2010 12:54:14 AM PDT> <Info> <Cluster> <anaeur10> <WL10MP2-ServiceSTServer2> <weblogic.cluster.MessageReceiver> <<WLS Kernel>> <> <> <1278662054827> <BEA-000115> <Lost 2 multicast message(s).>

SJ,
Thanks, that's perfect explanation i was looking for. We always create cluster from console and it could be that we used MULTICAST messaging mode in past hence the entries in config.xml. What made me to raise the question "will UNICAST or MULTICAST be used" is that when ever we experience a drop out server issue from cluster, i see the following message written into each managed server log. Ideally, the following should be written into log if the multicast messaging mode is in operation, right?
<weblogic.cluster.MessageReceiver> <<WLS Kernel>> <> <> <1276490260768> <BEA-000115> <Lost 2 multicast message(s).>
<weblogic.cluster.MessageReceiver> <<WLS Kernel>> <> <> <1276490260768> <BEA-000115> <Lost 2 multicast message(s).>
<weblogic.cluster.MessageReceiver> <<WLS Kernel>> <> <> <1276490261355> <BEA-000115> <Lost 2 multicast message(s).>
<weblogic.cluster.MessageReceiver> <<WLS Kernel>> <> <> <1276490261355> <BEA-000115> <Lost 2 multicast message(s).>
The above message is not written all the time but only when server removed from cluster group. Please be inforemed that i have enable unicast debug mode. will unicast also writes messages as above when hearbeat message lost?
To trace our issue further, i have to manually remove reference from config.xml and monitor for sometime. its still mystery why the clusters are dropping out. Sometimes, soon after cluster instances dropped out i can see the drop-out frequency as "Rarely" and after a week or so the members are regrouped with difference group leader. Are you aware of any issue with unicast messaging mode in WL10 MP2?
Is it good idea of testing multicast?
Thanks a lot for your time.
-RR

TS1539 I get this errror message with a batch of 21 songs I bought as MP3's on Amazon, installed into Amazon Cloud, and uploaded to itunes. After that, they will NOT sync to my ipod Classic 120g. This has no happended in previous uploads using the same p

Clearly I thought I was typing my Q in here, but it loaded into the headline.
The issue is my inability to sync songs (purchased from Amazon, and downloaded with Amazon Cloud Player) to my ipod 120G Classic.
21 songs (most recent, as I buy from time to time, but have never had this problem) will not sync to ipod, but will show up in Music files/library.
The error message is -50, and I did the step-by-step procedure to update the appleipod.bat file (?) with no success.
This problem never occured before.
I have restored the ipod to original settings, deleted and reinstalled the songs many times and now have hours and hours into trying to simply get some new songs onto my ipod...
HELP!!
thanks
C
[email protected]

See this older thread for a few possible solutions.
https://discussions.apple.com/thread/3924425?tstart=30
B-rock

Office Professional Plus 2013 - Click to run fails to start - errror message "Couldn't install"

I have just purchased an new PC with 8.1, and have also purchased Office 2013 via the HUP. Now I am trying to start the download. After clicking on the link in the email, a "Click to Run" file is downloaded. When I open the file, it fails
to start the Office 2013 download. I get the message "Couldn't install"
However after trying several options including compatability and administrator options, I still get the message "Couldn't install".
I have checked for compatibility and all checks OK
I am looking forward to an ideas :)
Thanks in advance :)
Richard

Hi Richard,
Thanks for your question. I believe that "Couldn't install" is not the complete error message, it would be great that you can copy and paste the entire message here. It's necessary for the investigation.
Please first check if you have any pre-installed version (Preview edition) of Office on your PC. If yes, please try to use
Microsoft Fix It tool to remove any traces of Office from your computer, then try the installation again:
http://support.microsoft.com/kb/2739501
You might also need to follow the manually steps mentioned on the same page to delete the related reg keys/folder structures, and then try again.
Hope this helps.
Thanks,
Ethan Hua CHN
TechNet Community Support

HT4557 I have music on my second Iphone, but when I hook myphone to my computer the library is empty even though there is music on the phone. When I try to add music to the phone I et an errror message that says it can not be moved because the phone can

I can not manage music on an additional device. Thephone has music from my library on it. But when I connect the phone to my computer it shows there is nothing on the phone. When I gry to add a song, I get an error message that says can not be copied to IPhone Helen(name of the phone) because it can not be found, even though it shows on the coputer

See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your new Mac and into iTunes.
Recovering your iTunes library from your iPod or iOS device
Then proceed to do the Erase and Sync or restore the device.
B-rock

How to display errror message in a form based on a procedure

I created a single-level form based on a procedure. In this form, I would like to generate an error message inside of a custom button, so I used the following inside of that button:
p_session.set_value (p_block_name => 'DEFAULT',
p_attribute_name => '_STATUS',
p_value => 'Please choose a valid chair from the popup icon.');
Unfortunately, it returned a WWV-0000 error code without any error messages. I use that code in another single-level form based on a table/view, and it works fine, but I need a single-level form based on a procedure. Therefore, I want to know if that code snippet can be used in a form based on a procedure or not? Do we have any other ways to display error messages in pl/sql besides p_session.set_value(...);
Thanks in advance.

Somebody please response.

Errror message: file already exists - overwrite or save as?

When I attempt to open the .cp file that I had previously
worked on today I now get the following series of messages:
1. C:\Documents and Settings/vsutherl/My Documents\My
Captivate Projects\game\game2.cp already exists.
Do you want to overwrite the file or save as a new file?
When I select "Overwrite" or a File Save As, I get the
following message in response:
Adobe Captivate could not open "game2.cp" because it is
either not a supported file type or because the file has been
damaged (for example, it was sent as an email attachment and wasn't
correctly decoded).
This began happening after I attempted to click the game2.exe
file to review the project in its final (stand alone) form but
clicked the .cp file in error, which was already open.
Now all four of the projects (which were clones of each other
with simple text changes for each project) receive the same error
message. I can no longer open any of the source (.cp) files to make
additional changes. This represents *weeks* of work and I cannot
start from scratch to rebuild all four projects - again. I've
already had numerous problems with these projects (per prior posts
here).
Other projects (totally separate and apart from these 4) open
properly. However when game2.cpgot corrupted it caused all of the
other gameX.cp files to also receive the same error message;
resulting in not just one file being corrupted but all 4 even
though the problem that was originally encountered was when
attempting to (re-)open game3.cp (while already open).
How can this file corruption be overcome? I am using Windows
2000 and Captivate 3.
Help and thanks!
Vince

Another possibility, I think, is using the wrong version of
Captivate to
open the course. I see this error, or something similar, if I
attempt to
open a CP2 file in CP1. Do you have various versions of CP on
your
computer? Are you sure you're using the proper version to
open a given file?
Erik
awelendam2 wrote:
> Adobe Captivate could not open "game2.cp" because it is
either not a supported
> file type or because the file has been damaged (for
example, it was sent as an
> email attachment and wasn't correctly decoded).
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware
*The Blankenship Caveat: Note that direct linking to http
content
through any Authorware icon will likely fail if a proxy
server is present!*

Receiver File CC errror message

HI Guys,
I am working on IDOC to File scenario whre I am getting Follwing error in File sender CC in RWB.. IN SXMB_MONI IDOC message is successful
Message processing failed. Cause: javax.ejb.EJBException: Exception in getMethodReady() for stateless bean sap.com/com.sap.aii.af.appxml|com.sap.aii.af.ejb.jarxml|CallAdapterWithMessageBean; nested exception is: com.sap.engine.services.ejb3.util.pool.PoolException: javax.ejb.EJBException: Exception raised from invocation of public void com.sap.aii.af.app.modules.CallAdapterWithMessageBean.ejbCreate() throws javax.ejb.CreateException method on bean instance com.sap.aii.af.app.modules.CallAdapterWithMessageBean@4ba33360 for bean sap.com/com.sap.aii.af.appxml|com.sap.aii.af.ejb.jarxml|CallAdapterWithMessageBean; nested exception is: javax.ejb.CreateException: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of SapXIJDBCAdapterService
Any Idea?
Thanks
Rajeev

HI,
As stated I restarted the service but still the following error exist:
Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.ejb.EJBException: Exception in getMethodReady() for stateless bean sap.com/com.sap.aii.af.appxml|com.sap.aii.af.ejb.jarxml|CallAdapterWithMessageBean; nested exception is: com.sap.engine.services.ejb3.util.pool.PoolException: javax.ejb.EJBException: Exception raised from invocation of public void com.sap.aii.af.app.modules.CallAdapterWithMessageBean.ejbCreate() throws javax.ejb.CreateException method on bean instance com.sap.aii.af.app.modules.CallAdapterWithMessageBean@58e01320 for bean sap.com/com.sap.aii.af.appxml|com.sap.aii.af.ejb.jarxml|CallAdapterWithMessageBean; nested exception is: javax.ejb.CreateException: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of SapXIJDBCAdapterService..
In CC in short LOG its states as Functioning but the status is in RED and the error message as stated above.
Even I tried wtih giving the wrong server details but still its giving the same error instead of saying wrong server details or so!....
Any inputs?
Thanks
Rajeev
Edited by: rajeev raj on Sep 19, 2009 3:19 PM

Errror message "quicktime -3" can't open iTunes

I was in the middle of updating itunes and I got an error message that just says error message -3. I have tried to uninstall both itunes and quicktime and re-install and that was unsucessful as well. I also tried to dissable my security stuff and install then and that was unsecsefull. I need help I am dying from lack of music!!!!! help me please! I am considering becoming a monk if I can't figure this out!!!
[email protected]

Try posting in the iTunes for Windows area. You'll be more likely to get a quick and accurate answer there than you will here in the iTunes for Macintosh forum. Good luck.

WLS Cluster with Message Driven Beans and MQSeries on more than one Host

          With the Examples of http://developer.bea.com/jmsproviders.jsp and http://developer.bea.com/jmsmdb.jsp
          a MDB can be
          configured to work with MQSeries with one WLS Server. This works only, if a Queuemanager
          is started at the same Host that runs the WLS Server too.
          And the QueueConnectionFactory (QCF) is configured to TRANSPORT(BIND).
          In my configuration should be two WLS Servers and one JMS Queue (MQS) with the
          Queuemanager.
          A Message Driven Bean is deployed on both WLS Servers wich should get the Messages
          of this Queue.
          If one of the two WLS Servers fails the other WLS Server with the corresponding
          MDB should get the Messages of the
          MQSeries Queue.
          If the QCF is configured to TRANSPORT(Client) the Message Driven Bean can't start
          and the following Exception is thrown:
          <Jul 18, 2001 3:52:49 PM CEST> <Error> <J2EE> <Error deploying EJB Component :
          mdb_deployed
          weblogic.ejb20.EJBDeploymentException: Error deploying Message-Driven EJB:; nested
          exception is:
          javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for
          'btsun1a:TEST'
          javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'btsun1a:TEST'
          at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:434)
          I'm wondering, because their is a MQQueueManager on btsun1a; all Servers throws
          the same Exception when the MDB is deployed.
          The configuration of JMSadmin on both Hosts is the following:
          dis qcf(myQCF2)
          HOSTNAME(btsun1a)
          CCSID(819)
          TRANSPORT(CLIENT)
          PORT(1414)
          TEMPMODEL(SYSTEM.DEFAULT.MODEL.QUEUE)
          QMANAGER(TEST)
          CHANNEL(JAVA.CHANNEL)
          VERSION(1)
          dis q(myQueue)
          CCSID(819)
          PERSISTENCE(APP)
          TARGCLIENT(JMS)
          QUEUE(MYQUEUE)
          EXPIRY(APP)
          QMANAGER(TEST)
          ENCODING(NATIVE)
          VERSION(1)
          PRIORITY(APP)
          I think only TRANSPORT(CLIENT) can be used when i don't wan't to install a Queue
          and a QueueManager on each WLS Server.
          Does anybody know a problem of WLS 6.0 SP2 to cope with TRANSPORT(CLIENT)?


          With the Examples of http://developer.bea.com/jmsproviders.jsp and http://developer.bea.com/jmsmdb.jsp
          a MDB can be
          configured to work with MQSeries with one WLS Server. This works only, if a Queuemanager
          is started at the same Host that runs the WLS Server too.
          And the QueueConnectionFactory (QCF) is configured to TRANSPORT(BIND).
          In my configuration should be two WLS Servers and one JMS Queue (MQS) with the
          Queuemanager.
          A Message Driven Bean is deployed on both WLS Servers wich should get the Messages
          of this Queue.
          If one of the two WLS Servers fails the other WLS Server with the corresponding
          MDB should get the Messages of the
          MQSeries Queue.
          If the QCF is configured to TRANSPORT(Client) the Message Driven Bean can't start
          and the following Exception is thrown:
          <Jul 18, 2001 3:52:49 PM CEST> <Error> <J2EE> <Error deploying EJB Component :
          mdb_deployed
          weblogic.ejb20.EJBDeploymentException: Error deploying Message-Driven EJB:; nested
          exception is:
          javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for
          'btsun1a:TEST'
          javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'btsun1a:TEST'
          at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:434)
          I'm wondering, because their is a MQQueueManager on btsun1a; all Servers throws
          the same Exception when the MDB is deployed.
          The configuration of JMSadmin on both Hosts is the following:
          dis qcf(myQCF2)
          HOSTNAME(btsun1a)
          CCSID(819)
          TRANSPORT(CLIENT)
          PORT(1414)
          TEMPMODEL(SYSTEM.DEFAULT.MODEL.QUEUE)
          QMANAGER(TEST)
          CHANNEL(JAVA.CHANNEL)
          VERSION(1)
          dis q(myQueue)
          CCSID(819)
          PERSISTENCE(APP)
          TARGCLIENT(JMS)
          QUEUE(MYQUEUE)
          EXPIRY(APP)
          QMANAGER(TEST)
          ENCODING(NATIVE)
          VERSION(1)
          PRIORITY(APP)
          I think only TRANSPORT(CLIENT) can be used when i don't wan't to install a Queue
          and a QueueManager on each WLS Server.
          Does anybody know a problem of WLS 6.0 SP2 to cope with TRANSPORT(CLIENT)?

O-Cluster Errror Messages

Similar Messages

Maybe you are looking for