OAS 4.0.8 and RDMBS 8.0.5 - would it work?

hi !
never heard of release 8.0.6 for linux, so
i'm really surprised to hear/read this one
is required for oas 4.0.8 as the DB engine.
did somebody try to run it with 8.0.5 ?
honestly, i don't feel like setting up 8.1.5,
i'd rather stick to my 8.0.5.1 EE running
quite OK.
cheers
max
null

Jason Bennett (guest) wrote:
: Are there any instructions for configuring OAS 4.0.8 to work
with
: the XSQL Servlet ? I've been trying unsuccessfully for a week.
At the moment I feel there is no way to do that. Youe have to
use Apache and Jserv if you really need it now.
Karl
null

Similar Messages

I want to try and keep my iMac cooler , would this work ..?

My new iMac 24 inch is working fine , the only thing is its getting very hot on the casing at the top, I think this may be due to the fact it is working in a very hot room, the iMac sits on a nice and clear desk top well away from the wall , the room is well ventilated with all the windows open, but the room temperature get’s very hot and there’s no room air conditioning . I was wondering if I placed a fan on the desk top
To blow some air onto the iMac’s case , this may help reduce the machine from getting hot ..? . Where does the iMac draw its cooling air from , the bottom or top of the casing..? and do you think that putting a fan on the desk would reduce the iMac’s
Casing temperature in any way ..?

Is the ambient temperature within the operating limits stated for the iMac? (Operating temperature: 50°F to 95°F - 10°C to 35°C) If so, why worry about some Heath-Robinson cooling arrangment. If the heat is being dissipated out of the iMac then it's doing the job it's designed to.
If you look at the iStat Pro widget:
are there any that are actually higher than they should be. The metal case of the iMac acts as a heat-sink so it will feel warm in places whereas other computers may be far hotter inside but feel cooler to the touch.
mrtotes

I downloaded and tried Firefox. It would not work for me so I removed it. Now my entire computer is screwed up. What haoppened. Who will pay the repairman to fix it?

After I removed Firefox (because it hid everything I tried to download so I lost it all and had to go and redownload with IE) Affter I removed Firefox my music would not play, and now my printer is lost. It says the registry spool is gone. What is up.
I am very old and techno stupid but when I removed Firefox should everything on the computer remained as it was befire I tried this browser?

i downloaded quick time but it wont work! every time i click on my itunes to open it comes up as "error -2096 quick time failed to initialize"
That one is often a compatibility mode problem. Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

Developer 6.0, OAS 4.0.8 and Oracle 8i

I have just installed Oracle 8i, Developer 6.0 and OAS 4.0.8 into our Windows NT 4 test box. I installed the three components on different ORACLE_HOMEs. I am having some difficulties in deploying the demos on the web. I used the static.html and I all I get is a "Oracle JInitiator: applet oracle.forms.engine.main inited" message.
According to the OAS 4.0.8 release notes, OAS 4.0.8 should be installed on a seperate NT machine if you are using Oracle 8i. The Developer 6.0 release notes recommends to use Oracle 8.0.5 and OAS 4.0.7.
Do I really have to follow the release notes? Is it possible to setup Oracle 8i, OAS 4.0.8 and Developer 6.0 on the same NT machine? If it is possible, will it work?
Thank you in advance.

Ganesh,
The port that I use to create a new listener is not being used by another process. After creating the new listener the wrb.log is empty and the new listener doesn't have a .err log. The NT event log message is :
'The description for Event ID (0) in Source (Oracle Web Listener Administrator) could not be found. It contains the ff. insertion string(s): Unable to open service, due to system error 1060.'
Roncab
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Ganesh Kumar ([email protected]):
Just to double check, Did you check the port number of that newly created Listener? Because if that port is already in use, the HTTP listener will not start. Did you check the log file wrb.log? and also check the error
(.err) file of the new listener that you can find under the directory
'OAS_HOME'\ows\admin\'sitename'\'listener_name'
Please check these files for futher details.
Ganesh<HR></BLOCKQUOTE>
null

OAS 10.1.2 and 10.1.3 on same server

Could I run OAS 10.1.2 and 10.1.3 the same time on the same Sun Solaris box (different ports of course)?
Thanks

Yes to both questions.
Refer to the Upgrade and Compatibility Guide for your 10.1.3.x release.
For example, here is the 10.1.3.1 version:
http://download.oracle.com/docs/cd/B31017_01/core.1013/b25585/compability.htm#BABBDJCA
Thanks,
Beth

OAS is in "Continue and Converge" status, what does it mean ?

Hi all,
Could any body please explain, what does it mean by : OAS is in "Continue and Converge" status ?
What is the impact on our mission critical application that we to deploy on it (OAS 10g/11g) ?
What will happen to OAS 11g ?
Thank you,
xtanto

The message in the log is the last thing recorded before my system experiences screen flickering, system lockup, and then a screen full of a random color such as a dark red, dark yellow, grey, or black. I can see that the screen is still on and back lit, but I have to force quit the computer and restart it.
I have not been able to reproduce the problem to a specific piece of software as it has occurred while running Safari, Pages, Starcraft 2, heck even just moving documents around in the Finder. The problem started at the end of March.
Apple Hardware, Disk Utilities, and TechTool Pro 6 says, for the most part, that everything is just fine. TTP6 did highlight 3 issues with the SMART parameters for my hard drive - 2 of which ("Seek Error Rate" & "Hardware ECC Recovered") still passed the test. The one hard drive issue that failed the test was the "Temperature Changes".
For absolute completeness sake, after exhausting my bag of troubleshooting tricks, I started from scratch. (Something I haven't had to do since the days of OS 9.)
I have since :
Thoroughly wiped my drive.
Reformatted my drive.
Reinstalled Lion (which I've used since its release without problem).
Used TTP6 to Defrag & rebuild directories.
All software is up to date.
The only additional software I've reinstalled, for graphical stress testing is SC 2.
The system still randomly suffers screen flickers, followed by system lockup, and then the screen displays a solid color = force system reboot.
My fixation on the graphic hardware is because the most reoccurring log reports from the Console notify of a GPU restart and the "NVIDIA" channel report. Oh, a few days ago I did get a kernal panic on :
"(cpu"

I have a four month old Iphone 4, from the Apple store, And seems like every day something stops working on it. Today I can't hear the person thats calling, but they hear me fine. Anyone know how to fix this?

That is just the most recent problem. Other problems are the screen freezes all the time, and it won't scroll or do anything. Another is my keyboard lags as I type. another problem, is with some of my apps are constantly crashing. And It is not the apps itself per se, because my friends can be using the same app, and they are fine. Another would be emails not pushing. I will have some emails that show up, some will say I have new emails, but open to check and nothing there. Then other times i will have like 17 emails all show up at once, with some being sent days before. Another problem is my Wifi turns itself off all the time. Even when I am sitting less than 10 feet away from the router. And When I add new contacts, they are visible for a few days, then all the sudden they are nowhere to be found. Sometimes it will at least save the number in my contacts, and no name or other info. And other times it doesn't save anything. These are just a few of the many problems.
Because I got this phone shortly after the new IOS7 update, I thought since I had read about problems others were having after updating, may have been the reason I was having some initial problems. But they have only grown to more problems, and not getting better.
Has anyone else had these same problems? Do I just have a bad phone? If you have had any of these problems, were you able to get a fix and how? Any help would be greatly appreciated.
Thanks

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted

I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted back to a blank version of itunes and I cant get ctrl to work again. Any other ideas?

This is sometimes caused by a problem with the iTunesPrefs.xml file, normally found at C:\Users\<User>\AppData\Local\Apple Computer\iTunes\iTunesPrefs.xml. Try dragging this to the desktop and trying again.
Alternatively the problem may be that you have McAfee AV and it is preventing iTunes from updating the same file and thus causing the problem. See Why does iTunes delete my itunesprefs.xml? for details.
tt2

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

I am doing a lot of presenting with the ipad and want an app that would bullseye or show where I am to my audience. Anyone know of something like this?

I am doing a lot of presenting with the ipad and want an app that would bullseye or show where I am to my audience. Anyone know of something like this?

It sounds like either your hard drive or the SATA cable that connects it to the motherboard are failing. This could be heat related in your case, which is why you see it after it runs awhile. You can take it to the Genius Bar for a free evaluation. If you decide to test it yourself, I usually suggest moving the hard drive to an external enclosure. If it works there for awhile, the cable is probably the issue.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1397647657&sr=8-3&keywords=2.5+enclosure
http://www.ifixit.com/Device/MacBook_Pro_13%22_Unibody_Mid_2009

Have been a Verizon customer since I got my first cell phone in my 30's - I am 50 now! A year ago, I stupidly opted to get a new phone on the EDGE program because I was trying my first Samsung device and was not sure I would like it having been an IPhone

have been a Verizon customer since I got my first cell phone in my 30's - I am 50 now! A year ago, I stupidly opted to get a new phone on the EDGE program because I was trying my first Samsung device and was not sure I would like it having been an IPhone user for years.I was right! Or so I thought.... The Note 3 has been horrible. I am on my second phone(replaced it under warranty) and it still freezes, shuts off on its own, and will not come back on for long periods of time. Having had enough, I decided to EDGE Up to another device. On March 16th I tried to edge up my device online but was unable to. I immediately called to figure out what the problem was. Back in October I had a mix up in my billing where I had set up a payment. It was not done properly by customer service and as a result my line was cut off. I called the EXACT day it went off, filed a complaint about the lack of follow through for my arranged payment, and thought I had it straightened out as the payment was made that same day. That incident, although it was a Verizon error, caused my Edge Contract to be "hotlined". I spent an hour on the phone on March 16th clearing the whole mess up. When the conversation ended, the Verizon representative admitted it was a Verizon error, documented everything, and then told me she was filing a release for the hotline hold that would take a couple of days. Her name was Linda and I stupidly trusted what she said.
The days passed as I prepared to have a major foot surgery and to get my classroom straight before I would be out recovering for 3 weeks. All the time, my Samsung continued to glitch out like it has since I got it! While sitting on the couch recovering, I decided to deal with the phone issue again and EDGE UP. I figured 10 days latter, Linda would have taken care of the issue. Unfortunately, I faced the same problem and was told it was not eligible to edge up at this time. BACK on the phone again, 2 supervisors, 3 customer service reps. ( JOE from New York being the rudest customer service rep. I have EVER worked with) and 4 frustrating HOURS latter, Jason, the equally rude supervisor from Rochester, New York, informed me that Linda gave me BAD information, there was NOTHING he could do, and I am NOT eligible until April 14th!!!!! The WORST experience I have EVER had with a company. They were completely inept, rude, and not concerned about my time, my frustration, or the problems I was facing with their product in the LEAST. I have 4 LINES on Verizon that I am going to talk to Sprint about buying out. It was a horrible experience, and I can NOT believe I have no recourse or anyone to talk to....

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

How do I change my user name in syn? I typed in the wrong email address. And I cancelled syn thinking this may work but no luck.

How do I change my user name in syn? I typed in the wrong email address. And I cancelled syn thinking this may work but no luck.

You have to clear saved password for this page:
# Open you login page (where you have to enter username and password).
# Right click on page and select '''Page Info''' form context menu.
# On last tab ('''Security''') there is '''View saved passwords''' button, click it and delete all saved passwords for this page.
# Also clear all related cookies (just in case) there is button for this next to first one.

Why would the Firewire Port and/or External DVD-RW suddenly not work?

Hi, it's me again. I swear, I must be destined to just use Windows machines...
Anyways, I have a used/refurbished iBook G3 500MHz 320MB RAM Dual USB (1 Firewire)laptop running OS 10.2.8 that I bought a few months ago. I went and purchased an external Firewire/USB 2.0 DVD-RW drive as I only had a CD-ROM drive on my machine and I wanted the option to burn CD's or watch/read data from DVD's (I know that with my slow processor writing DVD's -other than data- would be a stretch and have other machines to do that with anyways so it wasn't a concern really). I received it and installed it, also installed the free version of Toast that came with it, and the drive worked fine. I have not needed to use the drive since then and have not used the laptop much at all since then really, but I do need to say that I did end up adding a new user account, though I can't remember if I changed the original Admin account and then still have the one I created myself when I first started the laptop after I bought it (had a fresh install of Jaguar on it, but I have no disk to re-install with if needed) or if I created a separate (new) account and ended up deleting the Original Admin accout (I know in Windows, you cannot delete the original Admin account but I do not know if that is the same for OSX or not). I did this as I wanted a master Admin account that I just wouldn't really use and then wanted the other as my main account (and use it to connect to my home windows network) and for some reason it would not let me put a check in the box to allow that account to do so (from either Apple or my user accounts) and so I know that my main user account now is set up to allow it (was it the old Apple user account or a new one, I can't remember- sorry).
Ok, so that is the back story to my problem, which happens to be this:
I just bought a new chip of RAM (512MB to make it a machine with 576MB RAM total) and as I had been looking at getting OSX Tiger (but didn't want to do it without the extra ram and had been considering Panther instead as well), I thought it was necessary if I wanted to not bog down my machine. I bought the Install Disks on DVD for Panther, as well as an upgrade disk (DVD again) for Tiger, therefore letting me use the External Firewire DVD-RW to install Panther, and if I liked I could go ahead and upgrade to Tiger (and if I didn't like it too much, or it slowed things down too much etc, then I could always go back to panther and have both available for future options). The extra RAM coming in handy here definitely.
So I was going to install the RAM today, and decided to go ahead and test out the External DVD to make sure it could boot from it (before making any changes to my system) and then go and install the RAM, and after that, install Panther to start... But I plugged all the cords and cables in, used my laptop with AC power even, and I could not get the External to show up at all... (kinda like the very current post right below mine but for the G4- it worked before, but now the firewire External just does not show up).
I only have USB 1.1 on this laptop obviously, and I don't even know if you could do a boot from an external with USB 2.0 if my laptop had it (the DVD player does). I was recommended to boot with an external firewire DVD or firewire to another machine with DVD capabilities to do the install. So my problem right now is getting slightly bigger, as of course, I can't seem to momentarily find the stuff that came with the External (spare USB cable to check and see if the laptop will recognize it at least with that and to show it is the firewire that is not working properly, or the disk that I used to install it -might have been only used to install Toast free version if it didn't need any drivers, but I don't know where that or the instructions for installation sheet currently is -- I am looking for it, but I have switched bedrooms just last week and I also seem to be missing a few other Windows laptop disks as well so there is a good chance that they are all together, I just need to figure out where, heh.)
I am waiting currently before installing the memory, though if I don't get the External working tonight, I may go ahead and do it first as at least I will have more memory on my laptop then, until I can get other stuff functioning and be able to do the Panther install.
But my main question is, is there something that would cause an installed external to suddenly not show up in OSX? Since I hadn't used it since that one day, and it was unplugged from the laptop itself, would that end up doing it, or more likely, the changing of the user accounts (though I have been trying to test it with different types of media and through both of my user account (which are both "admin" ones), though I do still have one of those being an account that was on there when the External DVD was first installed, so it really shouldn't have done this at all (one would think). So how big of a chance is it that the firewire has somehow gone dead and this is the main culprit to my wasting the past 4 hours on this???
I am currently scavenging around for an extra USB cable to try and test the External that way and will post the results when I can... I love the look and idea of macs, now I have a mac and want to upgrade it even, but why is it that whenever I attempt to use it after having not used it for a bit (and try to make the iBook feel better by using it more as I am sure it feels sad and alone sitting on the shelf while my Windows Laptop gets more attention), or try to fix it when it can be made better (and therefore used more often), the mac (all macs really), just seem to get all pissy and cause problems and make me spend hours upon hours trying to get things to work again??? You have to admit it, I am "mac cursed"... sigh I can program in 4 or 5 computer languages and am very advanced at many tech things (the ones I am not as good at I am still usually Average or Medium skilled) so it makes me wonder why I have so many tech problems with Macs when they are supposed to be the "easy" OS to use...

Actually, I think I have it all working now. After going back to the Plextor Website, I found out that the switch between the USB and 1394 ports only gets activated (switched over to the other) with you turn the device off first, move the switch and then turn it back on. I was sure that I had done this with the ibook, but maybe not as when I went back and did it with first the USB and then the Firewire cables, it did work. I definitely knew that I had not done this with the Windows laptop, the reason it would not have the USB work for me on it.
but back to the iBook, I was confused as it was only showing up as a DVD-ROM (which I guess is what they do until you actually open up the burning software to then be able to burn to it), and it also had the wrong Model #, which after more research, showed that it was the Internal DVD drive model version (PX-708A) compared to the actual model version (PX-708UF) which is the USB/Firewire (External) model. The firmware was really out of date as well (from June 2004 I think, v1.06) and they had v1.12 from Spet/Oct 2006 available so I went to get that (which was a hassle). They had nice easy Windows self extractor/installer packs, and then the BIN files for use for all systems (Sun OS/ Mac OSX/ Mac OS/ Linux etc as well as usable for Windows), and those needed a special Firmware Updater Application which was OS specific. Only I had the hardest time trying to get the OSX one as it would send me to a FTP site and not give me any clues as to which file(s) I needed to get and the Mac OS version was just for older 9.2 or below versions and didn't want to install under the OS Classic mode.
I ended up using my windows computer which made it easier to view with the FTP stuff as I have FireFTP in Firefox, and downloaded the files I thought I needed (to test out), and then realized my silliness, and just downloaded (as well) the Windows Auto Extractor/Installer as the Firmware is the same for all OS's, just the way to install/update it was different... So I hooked the DVD drive to my PC and updated the firmware, checked it out on here before moving it back to the ibook, where I checked that it still worked and had the new update version showing, which it did, and now I have my fully working and newly updated drive ready for the OSX installations... I had attempted to update my Jaguar system as well while online, but it had no new updates available (I guess those were all mostly Tiger updates that were just recently released).
I am now off to install my additional RAM, and after checking that it all shows up correctly, I will go ahead and do the Panther Install (and test it out and see if I like it or not).
For anyone that currently uses Panther on any mac, are there still any major problems I should know about before hand, or know about things that they have mostly fixed (like the issues with Firewire ports and External Drives that they had around the time Panther was first released for example)???
Thanks to all that helped... I now know to attempt an "eject" of any external HD (which I do have one that I will setup to use after I get Panther on the ibook) or CD/DVD drive instead of just unplugging the USB/Firewire cable.

TS3988 I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud?

I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud? I plan on getting rid of my old email address which is my old Apple ID so how is that going to work?

Same question Wish someone had replied!
I changed my Apple ID to my new email and now cannot find any way to access icloud. Unfortunately I had allowed icloud to hijack my airbook files, so of course I am afraid I will lose them tomorrow when I exchange my iphone for a new one and cannot keep an icloud account i cannot access. What a poor sync system! Really atypical for apple!

I just updated to iOS 7 on my iphone 4 and now my iTunes Store doesn't work. The App Store works fine, but the iTunes comes up blank whenever I touch the icons. It doesn't even seem like it loads at all. Can anyone help?

I just recently updated the software on my ihpone 4 to the iOS 7 and now my iTunes Store does not work. All of my other apps work perfectly fine except iTunes. Whenever I open the app, the icons for music and movies and tv shows come up, but when I touch them, nothing happens. The screen is just blank. And I already tried updating again, updating iTunes on my computer, turning my iphone off and on, and resetting my ihpone, and nothing works. Can anyone help?

I searched this site for ios 7 and itunes store and found numerous others with the same problem, and several suggested solutions. One said that they had blocked all cookies and that was apparently the problem. I had done the same thing - blocked all cookies. So I set cookies back to "third parties and advertisers" and that solved the problem. Now the itunes store is working.

OAS 4.0.8 and RDMBS 8.0.5 - would it work?

Similar Messages

Maybe you are looking for