OAYB transaction - taking the configuration off

Hello!
Has someone used the OAYB transaction (Limiting transaction type groups)? If so, would someone let me know if there is any problem if I take out the "Asset under construction" class already existing there, so that I avoid recording down payments related to project items (Asset Under Construction) in the down payments accounts related to the acquisitions and saving only the acquisition final amounts, after goods receiving?
Thanks very much!
Daniel.

Hi Daniel,
These are the postings in our system for PS /AM. You should have the same flow
On the asset
30.04.2010    500,00    ttyp 180 Downpayment
30.04.2010 1 .000,00   ttyp 116 Acguis. from CO settlmt to negative AuC
30.04.2010    500,00-   ttyp 181 Clearing down payment
30.04.2010 1 .000,00-   ttyp 339 Transfer new aquasition from cap.inv measure
Yournals
Settlement from the down payment
70 142xxxx0     500,00
50 142xx1xx     500,00-
Settlement from the GR
50 48xxxxxx   1.000,00-
70 142xxxx0   1.000,00
Settlement from the final invoice
75 142xxxx0     500,00-
40 142xx1xx     500,00
Settlement to the final asset
75 142xxxx0     1.000,00-
70 142xxxxx     1.000,00
(They use in our case the GR/IR received accounts for the down payments. I don't found that a good solution for the reason that MM and FI is no monger in line)

Similar Messages

My ipod nano 5th gen wont play movies or videos on my ipod but plays them on itunes when i click on it the screen flashes black i have tried taking the movie off my ipod and putting it back on but it still won't work what should i do?

My ipod nano 5th gen. won't play movies or tv shows but it plays them on itunes. When I click on it the screen flashes black. I have tried taking the videos off my ipod and then putting them back on but it still won't work. what should i do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

When taking the phone off the dock...

does it hurt anything to just take it off without hitting the eject button?
--JD

Does not make a difference weather you eject or just pull the phone off.

I was replacing my iphone 4 home button and while i was trying to take the ribbon off i pulled too hard and the part where you connect it broke so now i cant put it on, will i be able to get a replacement or not?

So I opened my whole iPhone 4 up and I was trying to replace the home button as it got worn out so when I tried taking the ribbon off, I pulled a bit too hard and then the whole thing just broke so now I cant even connect the ribbon anymore. So is there a way that I could replace it or not?

No one here works for or represents Apple, thus no one here can definitively answer your question. Out of warranty replacements require the phone, you're replacing, be in one piece. Generally, when you perform surgery yourself, you void the ability to take advantage of an out of warranty replacement.
Put everything back together, make an appointment at an Apple store & hope for the best.
Good luck.

Has anyone taken the glass off a glossy display?

I'm looking to buy an iMac, but do not care for the glossy screen. I noticed a reference in another thread about someone taking the glass off in a youtube video and watched that.
So, has anyone taken the glass off successfully and is happy with the result?

Well, having over 15 years experience with Apple Computers, the Glossy Screen is the stupidest and most irresponsible idea ever. So what HP, Compaq, Dell and the like decided Gloss was all the craze!...
Apple should know better than to jump on the bandwagon by now being the trend setters they have ALWAYS been. Apple should offer the option the way they do with their Laptops so one can choose if they want glossy or matt. Being a color correction expert, the gloss is just the icing on the doodoo brown cake for the 20" Aluminum iMac TN Displays. Either way you cut it, garbage is garbage and covering it up with something that adds blinding glare is just that... A cover up.
I was one of the first schmucks who bought one of these 20-inchers and it is the sole Apple computer purchase I've regretted from day one. Sure it looks pretty and all and is quite elegant but make no mistake about it... the Aluminum iMacs fall FAR short of Apples mark ranking right down in the gutter with the disaster that was the Quadra series before Mr. Jobs came back to Apple and cleaned house.
If anyone wants to buy mine I'll let it go stacked with all the software & 3 Gigs of Ram for $1,000.00 shipped!

Is there a (relatively simple) way to skip tracks with an iPod touch 5th gen using a physical button? I'm aware songs can be skipped on-screen without unlocking the iPod, but I'm looking for a method that doesn't require taking my eyes off the road.

Is there a (relatively simple) way to skip tracks with an iPod touch 5th gen using a physical button? I'm aware songs can be skipped on-screen without unlocking the iPod, but I'm looking for a method that doesn't require taking my eyes off the road while driving. For that reason, I'm also not interested in adding in headphones or additional devices that have the desired button functions. Going both forward and back would be great but I would be pleased just to have a "sight-free" way to go forward.
I've seen some mention here and there about ways to maybe change it so the volume buttons change tracks and holding the volume buttons changes the volume... but I don't know what's involved in that or if its even possible/recommended for a new 5th gen iPod. I think its a great device but its sadly lacking in music oriented functions and features... which is disappointing since music is why most people would bother getting one instead of some other "iDevice" :/

Given that you cannot do what you have asked for, perhaps you simply need to find another solution to your root problem.
Presumably, you want to skip to the next track because you don't want to hear the current one, and that is because...
You don't like it.
You've heard it recently and don't want to hear it now.
Simply don't want to hear it at this time.
For problem number 1. Don't put it on the iPod in the first place. (I know, obvious answer!)
For problem number 2. How about playing from a Smart Playlist (initially created in your iTunes Library) which has only songs you've not played recently?
For problem number 3. Hhhmmm! Create alternative Playlists for use in the car.
As for going back to the start of the "now playing" track.... Well, if your Playlist has only songs that you really, really want to hear, then you'll be looking forward to that rather go back to the beginning of the current song.
I'm not trying to be prescriptive, just giving you food for thought.
(They are all cheaper options than buying a car which can control the iPod from the steering wheel.)

Cisco WS-C6513 taking long time to save the configuration

HI,
cisco WS-C6513 taking long time to save the configuration.
Any ideas?
Thank you

Hello,
do you have correct dial plan ? It very depends on the country you live and you have your VoIP operator.
Try to finish your dialing with # - this may speed it up.

How do I turn the camera off after taking a picture?

How do I turn the camera off after taking a picture?

Exit the camera App by tapping the Home button.

Safari was very slow in opening up Google sites. I found a discussion thread that suggested changing the "Configure IPv6" setting to "Off" in the System Preferences, Network, Advanced, TCP/IP section. That seems to work well. Are there any risks?

Safari was very slow in opening up Google sites. I found a discussion thread that suggested changing the "Configure IPv6" setting to "Off" in the System Preferences, Network, Advanced, TCP/IP section. That seems to work well. Are there any risks to leaving the Configure IPv6 setting to Off?

Nope. You can always reverse that if you choose.

Trying to renew my subscription and can't seem to figure this out, my plan doesn't need renewed until feb 2015 so its not giving me the option to manage my account. Creative cloud isn't giving taking the $ off my credit card why? The $ is on my credit car

trying to renew my subscription and can't seem to figure this out, my plan doesn't need renewed until feb 2015 so its not giving me the option to manage my account. Creative cloud isn't giving taking the $ off my credit card why? The $ is on my credit card. Thank you.

Log out of your Cloud account... Restart your computer... Log in to your Cloud account
or
Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html

I'm taking iPhone 3G OFF NETWORK but need to TRANSFER the SMS messages to iPhone5. How do I do this?

I'm taking iPhone 3G OFF NETWORK but need to TRANSFER the SMS messages to iPhone5. How do I do this?

right i rang orange and they said they can do it
so two days later (today) i got a text saying the tried to take payment but i didnt have any credit on my phone so they will try again in 24 hours,
ive topped up now and i also turned off cellular data off to stop my phone using any credit, will this cause any problems with unlocking if the cellular data is off?

Why is apple taking the iPod classic off the shelves

Why are they taking the iPod classic off the shelves.

Usually when a product line is discontinued it is due to low-volume of sales. Not enough demand to justify the investment in manufacturing.

Is the configuration done in RSPLSE transaction code transportable?

I would like to know whether the configuration done in RSPLSE t.code transportable? In the rsplse screen I can not find any icon or option to do it.
If it is not transportable then do we need to create the configuration manually in the higher systems like Quality and Production?
regards,
Santosh
SEM Consultant

Hi Santosh
no, the settings are not transportable: The settings are system specific, e.g. the server names. So only the lock relevant characteristics make sense to be transported. So you may transport the contents of table RSPLS_CHAS_LOCK.
Or maintain the settings once again in RSPLSE in quality and production.
Regards,
Gregor

Ost 5 hours and has just a battery symbol with a little red column on the screen when I press the on/off button. I don't know why its taking so long to charge. Any suggestions?

My iPod 5th generation died and I charged it. It has been charging for almost 5 hours and just displays a battery symbol with a column of red when the on/off button is pressed. My home button also doesn't work so I cannot try to reset it that why. Any suggestions?

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Configuring off cycle payslip

Hi Folks,
we are facing an issue with the off cycle payslip. when we run off cycle payroll and cilck on remuneration statement. It is taking the payslip by default. we would lke to know where is this form is being picked up. Do we have any configuration setting where we can directlty maintain a configured form in off cycle run so that it can take the form which is being created by us in PE51.
Please share your valuable inputs.
Thanks and regards,
Samba.

Hi,
Thanks to all for replies. It solves my issue. in table v_t52cov. in this we have a possibility to define the variant against off cycle payroll. Now when we come to renumeration statement creating a variant, against the form design.
1. take the form that was created in PE51
2. Enter the form and the payroll area in the remuneration statement
3. Click on Save to create as variant. Variant name should be off cycle payroll
Logic is whatever may be the form but the variant should be off cycle payroll, this is the linkage to bring in the form display in Off cycle driver.
Thanks and regards,
Samba.

OAYB transaction - taking the configuration off

Similar Messages

Maybe you are looking for