OB52-problem in period close for all users

Hi,
In ob52 Apr-2009 period is closed but still it is allowing to post
Kindly help.
Regards,
Lakshman.

Hello,
How come OB52 period is being closed, but still allowing you to post.
Please describe what settings you have done, yours if year dependant or year independent FY, calender year or non calender year, and other relevant details, so that it help us to give you right solution. It seems there is something wrong in closing the periods.
Regards,
Ravi

Similar Messages

Problems installing flash player for all users on a computer (domain)

Hi all,
I've had a quick search but have unfortunately not found any answers.
I've just setup a new image using WDS to install 55 new Dell computers. Flash player was installed as part of this image, the problem i'm getting is that if I log in as a domain administrator I can run flash fine with no problems, however if I log in as a domain user, and try to visit any site that requires flash, i can't seem to view any flash content.
When logged in as the domain user and navigate to control panel I can see the "Flash player settings" option and when I view installed software I an see that flash player 11 is installed.
Does anyone have any ideas as to why this might be? - Do you require admin rights to view flash files?
Any help would be extremely grateful!
Thanks.
Matt

It might be a permission problem in the Flash Player install folder. Try a clean install on the original machine.
If that does not resolve your problem, can you tell what Windows version & edition you are using?
Also check the permissions of all files in
C:\Windows\System32\Macromed\Flash
C:\Windows\Syswow64\Macromed\Flash

Actions for All users - Detection Problem

I have created some action in illustrator and copied in the Presets\Actions folder. But it is not detecting for all users. Is there any way make the recorded action to be detected for all users?
Version: Illustrator CS2 and CS3 Windows XP SP2
The same way I did for photoshop is detecting recorded actions for all users after copying to default action folder.
Thanks,
Selvakumar

Check the permissions on the files themselves. They certainly do not inherit the properties of the folder and thus are not readable by all users. "System" and "Everyone" should possibly have full access in that case.
Mylenium

Security settings for all users

I recently developed a document that requires digital signatures and have been testing it. The only downside is that when a user opens the document, Adobe prompts for the installation of new security settings, and it installs it for that user only. I need to add a registry key to the new security settings, but it is only available to be added to the current user hive. Does anyone know how to install the new settings for all users?
Here is the registry key I need to add.
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Security\cPubSec]
"bSelfSignCertGen"=dword:00000000
Im using Adobe Reader 9.3 and Win XP.
Any help would be terrific!
Thanks.

Hi,
There are really two separate issues. First, is Adobe pushing updates to the Acrobat Address Book (i.e. adding certificates as trust anchors) and the second issue is how you can push your own update to disable the creation of self-signed digital IDs. Although the two issues share an underlying mechanism, they are separate and you cannot leverage one for the other.
First issue first. Adobe has entered into partnership with certain Certificate Authorities and has created a mechanism to add their certificates to the Acrobat Address Book (aka Manage Trusted Identities) using http to send a copy of the Security Settings file that contains only digital IDs. There are two ways to trigger the download process. One is to go into the Preferences, select Trust Manager, and click the Update Now button in the Automatic Updates group box. The other method is to load the DigSig plug-in (beginning with Acrobat 9, plug-ins no longer load a launch in order to speed up the launch process). As I'm sure you have deduced, opening a file with a signature field cause the DigSig plug-in to load which in turn triggers the automatic download. The reason we have limited the automatic download to DigSig being loaded is because the vast majority of people viewing PDFs are not using the digital signature functionality (much to my personal chagrin because the more people use digital signatures, the better my job security ) and we didn't want to bother them with an update they would never need. People already complain that there are too many updates, and we are trying to limit the irritability factor. To close the loop on this function, once the download process has been triggered the Acrobat check two more things before it does the update, 1) has it been a month since I checked and, 2) if it has been a month is there a new file to download. This way we are not pestering people with unneeded updates, or if they do need the update, at least not too often. And finally, Address Book management has to be on a per user basis. A certificate that you may elect to trust could be a certificate that the next person want to specifically keep untrusted. The Windows Certificate Store, Mac Keychain and Firefox Certificate Manager all work on a per user basis.
That brings us to what you would like to do. The good news is you can use the Export Security Settings featrue to create a distributable file that will set the preference. The real question is how will you distribute the file, but before we get to that, here is how to create the file.
With Acrobat closed, set the registry setting you noted in the message above
Launch Acrobat
Select the Advanced > Security > Export Security Settings menu item
Click the Deselect All button on the Export Security Settings dialog
Select the Signing Preferences Settings checkbox
Click the OK button on the Export Security Settings dialog
Select Signature Creation Settings and note "Allow creation of self-signed Digital IDs" is set to No
Click the Export button on the toolbar
Follow the on screen dialogs. You don't have to encrypt the file, but you must sign it with a certifying signature
At this point you have the file available for distribution. You could e-mail it to your intended recipients with import instructions, or you could post if for download, or you could set the Preference the to automatically push the file from a server. To check this feature out select the Edit > Preferences menu item and then select Security from the Categories list box. You would need to select the Load security settings from a server checkbox and then set up the URL. As an aside, you can also export these settings by selecting the Automatic Update Settings checkbox on the Export Security Settings dialog noted in the bullet points above. You have a chicken and egg problem in that you have to get the users to first manually import the file in order to set up the automatic import. That I can't help you with, you're just going to have to decide what works best for you.
Good luck,
Steve

ADE suddenly quit working for all users on my Vista computer. What should I do?

Please help.
Adobe Digital Editions quit working for all users on my Wndows Vista computer after I tried several times to install a book that wouldn't install. The book is one of three I recently purchased even though the other two installed with no problem. Other books were already installed.
I uninstalled and re-installed ADE with the latest version and tried again after clearing out the "My Digital Editions" folders by moving the contents elsewhere. The same problem occurs with all users on my computer.
The program runs showing no books or bookshelves despite contents in the "My Digital Editions" folder. If I try to "Add to Library," the program shuts down and shows nothing- not even an error message when re-run. Even though I'm only able to create a bookshelf, no bookshelf appers when the program is re-run.
I even tried de-authorizing and re-authorizing my computer.
What should I do?

HI
Whilst your Apple ID (presumably the @mac.com) may have been the original and been linked to @me.com at the MobileMe period and then to iCloud (@icloud.com) you need to keep to the same Apple ID through out (the iMessages server seems to treat them as different IDs to some extent).
In the Finder use the Go Menu > Go to Folder and enter ~/Library/Preferences
Find and Drag to the Trash com.apple.ids.service.com.apple.madrid.plist
On the iPhone remove those emails that are not the Apple ID in use.
On Restarting the Mac version you will have to re-enter the Apple ID.
If you then restart again you should get the pop ups to say what the iPhone is using (linking the iPhone number to the Apple ID)
Once you enable Text Forwarding on the iPhone then the Mac Version should generate and show you the Code to then enter in the iPhone's dialogue box to pair the devices.
If each Contact is turning red as you try to Send and reporting that the Contact is "Not Registered with iMessages" then you have a different issue.
This is caused by a partial login to the iMessages server and it seems it is one of those that only contacting Apple Support and saying you have an Account issue with the iMessages server from your Mac can it get sorted. (make sure you say it is an Account issue)
Of course it is the iPhone that is actually sending the SMS messages so it does need to have Carrier service at this point.
8:56 pm Monday; October 27, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Sideloading metro apps for all users

I am having problems with my sideloaded metro app…… Doesn’t seem to work anymore on any of my machines.
For the first few months, I originally installed my Metro app by first installing the app’s signed certificate to the local machine root store (All OK), then running the following command logged on as the actual user I wanted the app run
under.
Add-AppxPackage
-Path "MyMetroApp.appx"
-ForceApplicationShutdown
While this method sort of worked, it had two problems:
I needed to manually renew the developer licence every 30 days running
Show-WindowsDeveloperLicenseRegistration
and I had to do this logged on as the user on the actual console, couldn’t to this using remote PowerShell.
I want to install the app properly for all users without needing to keep renewing the developer license. I have now run the following to install the app for all users:
#Allow Trusted Apps
New-Item
-Path "HKLM:\Software\Policies\Microsoft\Windows\Appx"
New-ItemProperty
-Path "HKLM:\Software\Policies\Microsoft\Windows\Appx"
-Name AllowAllTrustedApps
-PropertyType DWord
-Value 1
#Install the app for all users
Add-ProvisionedAppxPackage
-Online -PackagePath
"MyMetroApp.appx"
-SkipLicense
This method – even though it seemed to complete successfully, a couple of issues:
there’s no shortcut added to the start screen on one of my machines, so I can’t open the app
I am getting a message popup upon opening my app “The app can’t open: There's a problem with {app name}. Contact your system administrator about repairing or reinstalling it. [Close].” on another machine
Can someone please point me in right direction to get my app working again? I don’t think it’s anything major, I think I’m on the right track.

The main steps are detailed here:
https://technet.microsoft.com/en-us/library/hh852635.aspx
It sounds like the app needs to be un-provisioned on your troublesome machine ?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Audio output device same for all users Yosemite

I use more then one account on my recent Macbook Pro. For the first account I like to have the audio output set to the speakers but for the other account I want the audio output set to the headphones.
With Mavericks the Macbook remembered the last audio settings for each user account.
With Yosemite any changes to the audio settings (input, output,system sound, etc.) on one account affects the audio setting on other the user account.
I tried various audio settings to see if it affected them all. It seems to.
I tried seeing if it happened only when the users accounts were logged in or it was different on boot etc. It seems to always change the settings for all users no matter what.
I tried resetting the PRAM but that did not solve it.
I tried a 3rd party program called AudiSwitcher from the App store to see if this could help but no luck.
I searched here and more widely to see if anyone else was reporting this and found one other person who seemed to mention the same problem and they concluded "I did some tests and came to the conclusion that the system now does not remember settings for each user, and applies the current setting of audio output for all accounts."
Curious to know:
     a) Does this affect other people? If not, I'll look for conflicting apps on my computer.
     b) Is this intended behavior or should I look for a way to report it as a bug?
     c) And most importantly if there is a way around it?
Thanks!

I'm also have the same problem. I tested it on fresh Yosemite installation without any additional software. Your mentioned my conclusion about tests.

You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation

Hi all
Have seen a couple threads regarding this but unfortunately nothing that solves my problem thus far!
Right now, our developers are using the Domain Admin account to promote their website code using MSI files. I'd like to change this as I feel the Domain Admin account should be on lock down and only used when absolutely necessary, pretty common. The
same goes for my account too, I would like to absolve as much use of the Domain Admin as I can.
Problem is, when they run installers from their own accounts, they receive this error: You do not have sufficient privileges
to complete this installation for all users of the machine. Log on as administrator and then retry this installation
The accounts they are using are part of the Built In Administrators group and the Domain Admins group... I'm not sure what other permission you'd need in a domain? We've gone as far as explicitly giving them local admin access on this server and still
nothing changes.
Is there a Group Policy or something that I can change to provide install rights and possibly remove these accounts as Domain Admin and more along the line of Power User?
Thanks much for your help!
Ryan

Hi,
You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
of the application for specific user.
Description of the Software Restriction Policies
http://support.microsoft.com/kb/310791
HOW TO: Restrict Users from Running Specific Windows Programs
http://support.microsoft.com/kb/323525
How to Implement Group Policy Security Filtering
http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Adding a domain user to the admin role within the local user management breaks all metro apps for all users!!

Hi,
I have posted this in another large thread under the "Windows 8 General" group but have not had any appropriate feedback from MS.
After hours of testing and working with other users I have managed to isolate a simple situation that breaks all metro ui applications within Windows 8 for all users on the machine. Here are my exact steps and notes.
Before continuing if you are running Avast then your solution may be to turn of the behaviour shield functionality as this also breaks metro apps. This is NOT the problem we are having!
I have performed 3 cleans installs after isolating the problem and am able to reproduce the issue every time using the same steps on two different machines.
First thing to say is that for us it has nothing to do with simply joining the domain, domain/group policies nor does it appear to have anything to do with the software we installed, the problem here is much more simple but the result is pretty terrible.
Here are my exact steps of what I did to reproduce our problem:
Complete format of HDD in preperation for a clean install
Clean install performed
Set up the machine initially with a local account
Test metro apps - all working fine
Open control panel from the desktop, click on System, change the system to join the domain, click reboot
Log into the system using my domain account
Test metro apps - all working fine
Here's were the problem starts. I need my domain account to have admin rights on the local machine so I can install programs without the IT men having to come over and enter their password every 5 mins.
I go to control panel via the desktop and click on User Accounts. From with here I then click on "Manage User Accounts". This requires the IT guys to enter their details to give me access to such functionality. This is fine
In the dialog box that opens I can only see the local user that was initially created during setup. The "Group" for this local account shows as "Administrators" - Image included below (important to note that metro apps are working at this point)
I click add and then add my domain account - also giving it administrator access
Sign off or reboot to ensure the new security is applied
Sign back in to the domain account
Test metro - ALL BROKEN
Sign out
Sign in as local account
Test Metro - NOW ALL BROKEN FOR THIS USER ALSO
So as soon as I add my domain account to the local user accounts and set it as admin it breaks all metro apps for all users. This is on a totally clean install with nothing at all installed other than the OS.
Annoyingly if I go back and change the domain account to a standard user or if I totally remove the domain account from the local account management system the problem does not go away for either user. basically it is now permanently broken. The only fix I
could fathom was a full re install and not giving the domain user admin access to the local machine.
Screen one - this is the local user accounts window AFTER joining the domain and logging in with my domain account (All metro apps working at this point)
Screen 2: User accounts AFTER joining the domain and AFTER adding domain account to local user management (METRO BROKEN)
I have isolated my machine from all group policies so nothing like that is affecting me. Users I have spoken to in different companies have policies that automatically add users to the local user management. This means that metro apps break as
soon as they join the domain which leads them to wrongly think it is group policies causing the error. Once they isolate themselves from this they can reproduce following my steps.
Thanks

Hi Juke,
Thank you for the response and apologies for the delay in getting back to you. My machine was running a long task so I couldn't try your suggested solution.
I had already tried running the registry merge suggested at the top of the thread to no avail. I had not tried deleting the OLE key totally so I did that and the problem still exists. I will post all the errors I see in event viewer below. For
your info, since posting my initial comment I have sent out my steps to 7 different people and we can all reproduce the problem. This comes to 10 different machines (3 of them mine then the other guys) in 3 different businesses / domains. We see the same errors
in event viewer.
Under "Windows Logs" --> "Application" : I get two separate error events the first reads "Activation of app winstore_cw5n1h2txyewy!Windows.Store failed with error: The app didn't start. See the Microsoft-Windows-TWinUI/Operational log for additional
information." The second arrives in the log about 15 seconds after the first and reads "App winstore_cw5n1h2txyewy!Windows.Store did not launch within its allotted time."
Under "Windows Logs" --> "System" : I get one error that reads "The server Windows.Store did not register with DCOM within the required timeout."
Under "Applications And Services Logs" --> "Microsoft" --> "Windows" --> "Apps" --> "Microsoft-Windows-TWinUI/Operational" : I get one error that reads "Activation of the app winstore_cw5n1h2txyewy!Windows.Store for the
Windows.Launch contract failed with error: The app didn't start."
If you require any further information just let me know and I will provide as much as I can.
Thanks

Why does Firefox 31 change all PDF icons and opening in browser, require a fix using REGEDIT to fix for ALL USERS on a computer?

The solution to use REGEDIT in the question linked below almost fixed my trouble with PDF files on over 30 computers, with several users on each computer:
https://support.mozilla.org/en-US/questions/1013642
But I needed to fix it for ALL users on a computer, without logging onto each account, on each computer. My fix was to logon as administrator and change the following system-global key instead:
HKEY_LOCAL_MACHINE\Software\Classes\.pdf
Name: Default
Type: Reg_SZ
Data: FirefoxHtm
Changed the data from FirefoxHtm to AcroExch.Document.11
I use Adobe Reader XI on Win7 Pro, 64-bit machines.
The problem started when I ran a downloaded file to install the new version of Firefox on the computers.
Why would Firefox require me to use REGEDIT in this manner to fix the problem?

This only happens when you set Firefox as the default browser and Firefox thinks that there is currently no application the handles PDF files.

Set a default layout for all users via DIAPI

Hello everyone,
I am attempting to set a default report for all users/business partners using the DI-API.
I can accomplish this in the B1 application via Tools> Layout Designer...>Set as Default
If there are entries in the RDFL table for this layout, I am prompted to delete these entries and set this layout as the default for all users/BP's
Based on the SDK Documentation, the following code should accomplish the same thing via the DI-API
(stripped down for clarity)
Dim oDefaultReportParams As DefaultReportParams
oDefaultReportParams = oLayoutService.GetDataInterface(ReportLayoutsServiceDataInterfaces.rlsdiDefaultReportParams)
oDefaultReportParams.LayoutCode = sMyLayoutCode
oDefaultReportParams.ReportCode = sMyReportCode
Me.oLayoutService.SetDefaultReport(oDefaultReportParams)
Code executes fine, but it doesn't have the expected impact on settings. The above code adds an entry to the RDFL table rather than changing the DfltReport field in the RTYP table like I expected, so instead of setting the default report globally for all bps/users, its adding an entry to the RDFL table to set the value for a specific user/bp
I experimented by including and setting the following properties to every combination I could think of with the same results
oDefaultReportParams.UserID = 'tried 1, 0, -1
oDefaultReportParams.CardCode = 'tried "", "0", "-1"
Am I misunderstanding the API, or using the wrong objects/calls...? If all else fails I could accomplish this via the UI-API instead, but the application was intended to be a stand alone app that didn't rely on SAP B1 application running, so any help or suggestions would be much appreciated.
Thanks!

Hi,
Please repost at SDK forum to get quick response. Close this thread here with helpful answer.
Thanks.

CP3525dn, networked -- default duplex for all users (embedded web server)

I want to set the default for all users on our networked CP3525dn to be duplex. I cannot find this option anywhere in the embedded web server. I have duplex turned on, of course, and users can set their own default to duplex, but I want it to be default for everyone--the default default, if you will.
Is this possible? I'm fairly certain it's possible if the printer is connected to a computer and shared on the network (but I don't remember the specifics) but I can't find out how to do it if it's on the network on its own.
Thanks!

I don't believe you can. It must be set for every user manually.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Seeding the cache for all users

We are facing some performance issues (even after using aggregate tables) and are looking into seeding the cache for all users so that the dashboard pops up immediately.
So far I couldn't make it work. As Administrator I created an iBot to run a report for 1 month (dashboard has a dashboard prompt on the period) with Data Visibility set to 'Personalized (individual data visibility)' as I understood from the manual this is the way to seed the cache for all users. Now when I log on with my personal userid and set the prompt value to that specific period it is not using the cache.
Obviously destination was set to 'Oracle BI Server Cache' and cache has been turned on.
Does anyone have any suggestions ?

We are facing some performance issues (even after using aggregate tables) and are looking into seeding the cache for all users so that the dashboard pops up immediately.
So far I couldn't make it work. As Administrator I created an iBot to run a report for 1 month (dashboard has a dashboard prompt on the period) with Data Visibility set to 'Personalized (individual data visibility)' as I understood from the manual this is the way to seed the cache for all users. Now when I log on with my personal userid and set the prompt value to that specific period it is not using the cache.
Obviously destination was set to 'Oracle BI Server Cache' and cache has been turned on.
Does anyone have any suggestions ?

How can I allow or block the use of local storage by specific sites for all users in my domain.

How can I allow or block the use of local storage by specific sites for all users in my domain.
I tried to do this by MMS.cfg but it is not working, the problem is also described in your blog "http://forums.adobe.com/message/3272907".
What I Want -: "I want to allow youtube for all the users in my domain and this should be listed in Control panel-->flash player-->storage-->local storage setting by site-->websites tab."

Wow, cor-el... Did you -intend- your reply to be inane, inappropriate and completely inapplicable?
How would that possibly do what I asked?
You -might- consider '''''reading''''' the question, -=before=- you reply. And it's really okay to NOT REPLY if you just don't know. Just an idea.
Feel better, real soon.

Disable JRE Auto update in Vista for all users?

I feel like a complete idiot that I can't figure this out, but it's either so obvious I'm overlooking it, or I just plain can't figure it out, so I'm hoping someone here can help.
We have not yet been able to figure out how to simply disabled the Auto Update option when installing JRE under Vista, so it will never check for updates, no matter what user is logged into a pc. I've just installed the newest version 1.6.0_05-b13, but get the same results.
Basically, we are creating a "base clone image" of a Vista workstation and we need the auto update feature of the JRE to be disabled so it doesn't check for updates. When a new user logs into the pc, we want them to 'inherit' this setting from the default user profile, or we simply want a 'global' setting on the pc that stops all JAVA update checks from occuring. But even though there are multiple registry keys that 'look' like they control the auto update function, no matter how we set them the update option still shows it is enabled when you open the JAVA control panel.
We have 2 basic problems:
- When a standard user runs the JAVA Control Panel applet and they select the 'Update' tab, the option to "uncheck" autoupdates is "grayed out". If we make the user a local administrator, then it is not grayed out anymore and they can set the option. Problem is, we have thousands of users and none of them are local administrators, hence the problem of getting it to already be defaulted to not check for updates. How do we get the update checkbox to NOT be grayed out for a NON-administrator?
- How do we set the 'global' (or default) option to disable the auto update checkbox for ALL users? No matter what we try, when a new user logs in, the auto update feature is still enabled after their initial profile is generated from the first time login.
I was able to figure out if I change the "EnableJavaUpdate" value in the below registry key, it will "remove" the Update tab from the JAVA Control Panel. But does the simply remove the tab? Or does it remove the tab AND disable auto updates for ALL users on the computer?
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Update\Policy
I've sent multiple emails to Sun asking for help on what should be a simple thing to do, but have never received a reply from them.
Keith Hemmelman

Thank you for the reply. I apologize for not getting back here sooner.
We actually already use a deployment.properties file located under the Default User profile on our Vista setup. It's located under the "C:\Users\Default\AppData\LocalLow\Sun\Java\Deployment" folder. This file does get copied over to a new user profile when a new person logs in. This is what we want since we have set things like the maximum cache size and temporary file location.
The problem though is there is no setting that disables the automatic update check within this file. The best I can figure out is that for some reason under the Vista environment, the auto update setting is controlled in the registry at: HKEY_CURRENT_USER\Software\JavaSoft\Java Update\Policy
There is a REG_BINARY key there that appears to control this option. It is named "EnableAutoUpdateCheck". The problem is that the value of this key is "several" characters long and it is "different" from one user to the next. I tried disabling auto update under the Java Control Panel and then copied the value of this key into the same aread of the Default User hive but when a new user logs in, it ignores that setting and auto update is still enabled. I also tried using a simple "0" to disable the autoupdate or a "1" to enable it for this key, but it doesn't work either. (This is very frustrating why there isn't a simple 1 or 0 setting to turn the auto update setting on/off.)
We had no problem getting this to work under XP. Basically we didn't have to do anything special in XP. We simply created a temporary user account and made all the settings we wanted and then copied that profile over to our Default User profile and the Java autoupdate setting under the Java Control Panel was disabled for all new users. We did the same thing under Vista, but the auto update setting was ignored and re-enabled for all new users.
I read through the settings for the deployment.properties file located at the below link, but there is nothing there to control the auto update setting.
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/properties.html
Thus, we can't get the auto update setting to be disabled in the default user profile so it will in turn be disabled for all new users that log into the computer. This is extremely frustrating.
The other equally frustrating problem we have run into under the Vista environment is that when you run the Java Control Panel, the option to disable the auto update check is "grayed out" and the user can't uncheck this option to disable auto update. We have found you must be an administrator before this option is no longer grayed out. Since none of our thousands of users are admins, this is also a problem for us. (This option works fine for a standard user if you are on a XP machine though. It's just Vista where things have changed.)
I've sent repeated emails to Sun in the past asking for help, but they never replied.
Keith

OB52-problem in period close for all users

Similar Messages

Maybe you are looking for