Obfuscated Toolkit: Is there a test routine to see if data is encrypted?

Does anyone know of a procedure, function, or package that will check to see if data has been encrypted previously before attempting to decrypt it? I inherited a database with several encrypted columns. But some of the data (i.e. first 100 rows or so [and more intermixed]) is not encrypted. I'm looking for a way programatically to check to see if data is encrypted before decrypting it.

DBMS_OBFUSCATION_TOOLKIT.DES3Encrypt procedure raises an exception, don't remember exactly whihc one, that is raised when you try to encrypt data previously encryoted. You can try that approach and just ignore when data is already encrypted.
HTH.
Arup

Similar Messages

Load Test Results - time series request data for by URL in VS2013

I am trying to figure out how to export and then analyze the results of a load test, but after the test is over it seems I cannot find the data for each individual request by url. This data shows during the load test itself, but after it is over it seems
as if that data is no longer accessible and all I can find are totals. The data that I want is under the "Page response time" graph on the graphs window during the test. I know this is not the response time for every single request and is probably
averaged, but that would suffice for the calculations I want to make.
I have looked in the database on my local machine (LoadTest2010, where all of the summary data is stored) and I cannot find the data I'm looking for.
My goal is to plot (probably in excel) each request url against the user load and analyze the slope of the response time averages to determine which requests scale the worst (and best). During the load test I can see this data and get a visual idea but when
it ends I cannot seem to find it to export.
A) Can this data be exported from within visual studio? Is there a setting required to make VS persist this data to the database? I have, from under Run Settings, the "Results" section "Timing Details Storage" set to "All individual
details" and the Storage Type set to "Database".
B) If this data isn't available from within VS, is it in any of the tables in the LoadTest2010 database where all of the summary data is stored?
Thanks
Luke

Hi Luke,
Since the load test is used to
simulate many users accessing a server at the same time, it is mainly verify a wev server load stress.
As you said that you want to find the data
for each individual request by url, I know that generally we can analyze the url request from the Summary like the following screen shot.
>>I
have looked in the database on my local machine (LoadTest2010, where all of the summary data is stored) and I cannot find the data I'm looking for.
I suggest you can try to add the
SQL Tracing Connect String in the Run Setting properties to trace the data.
Reference:
https://social.msdn.microsoft.com/Forums/en-US/74ff1c3e-cdc5-403a-b82f-66fbd36b1cc2/sql-server-tracing-in-visual-studio-load-test?forum=vstest
In addition, you can try to create an excel to analyze the load test result, for more information:
http://msdn.microsoft.com/en-us/library/dd997707.aspx
Hope it help you!
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see t

I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see the date. the sidebar no longer has the option for date. the most recent only shows the time.

If you only see the time then that would mean that you see an entry of the current day (today).
History items from past days should have the date as well in the Most Recent Visit column.
You should be able to see this changing if you open the last 7 days folder and scroll down.

NEW RAM working? Is there a test for it?

Hello, I have a G5 with dual 1.8GHz. It shipped with 1GB of RAM. I do a lot of music recording on my Mac and so I decided to upgrade to 2GB of RAM.
I purchased a 1GB kit PC3200 DDR (manufacturer part #STA-G5400/1BG) from Club Mac.
I installed the RAM per the directions and when I rebooted the computer, it shows that I have 2GB DDR SDRAM when I click on the "About this Mac" in the menu.
However, I cannot see ANY positive difference in performance. If anything, the computer seems to be hanging-up a bit more when opening apps such as the ones I use for music recording and/or video editing.
Is there a test that I can run on the computer to see if the RAM is working properly and at the proper speed?
Thank you!!

When installing RAM in a G5 it isn't always essential, but it can be a good idea to reset nvram while booted to the Open Firmware screen.
If the RAM you bought is "slow" Cas Latency than what you had, it could be running slower, but unlikely.
I would say 1.5GB is the 'sweet spot' for most needs and users.
Clearing out all the cache folders; cloning your system and then doing an erase and restore can help - superduper is one program worth investing in or there is CCC or even Apple DU Restore.
If your hdd is more than 60% full might want to look into another drive, or faster boot drive (10K 74GB Raptor - a newer and faster model similar to the 150GB Raptor is due "soon").
Applejack. Gets run in Single User Mode, usually after running fsck, and can be used to delete those swap files, check plists for corruption, and delete swap files. Reducing the size of the log files is also helpful. And that is just good general maintenance and housekeeping (and always have two backup sets to protect you).
With your G5, you have four RAM slots, max of 4GB, though you've used all the slots now (4 x 512).

ORA-28232: invalid input length for obfuscation toolkit

hi,
i am facing this error when i enterd more then 8 charecter in the input string.
ORA-28232: invalid input length for obfuscation toolkit
why i cant user more then 8 charecter for password.?

Rajnish Chauhan wrote:
hi,
i am facing this error when i enterd more then 8 charecter in the input string.
ORA-28232: invalid input length for obfuscation toolkit
why i cant user more then 8 charecter for password.?
28232, 0000, "invalid input length for obfuscation toolkit"
// *Cause: Length of data submitted for encryption or decryption is not a
// multiple of 8 bytes.
// *Action: Make sure that the length of the data to be encrypted or decrypted
// is a multiple of 8 bytes.since you did not share with us exactly what you did, we can say exactly what you did wrong.
How do I ask a question on the forums?
SQL and PL/SQL FAQ

My mbp with 10.8.2 is randomly freezing. Is there any test i can run?

My mbp with 10.8.2 is randomly freezing. Is there any test i can run? Software and hardware,?

Step by Step to fix your Mac

Hi skydiver, I have ios7.4, I tried two different USB ports and it still doesn't show,up on my desktops in my computer as iPad so I can't click it. If it was there I would open and see all my photos, and YES it ask me DO I trust this computer! several tim

Hi skydiver, I have ios7.4, I tried two different USB ports and it still doesn't show,up on my desktop in my computer as iPad so I can't click it. If it was there I would open and see all my photos, and YES it ask me DO I trust this computer! several times.
The apple tech on the phone, went to my control,panel
Went to my devices. Original iPad showed up,there In red and then he had me go,to apple website, download something and it said it could configure to my computer.
Is,finally answer,to me was go to the apple care,one on one appointment, and it's my "software"
A man I know told me "Apple at store, won't be able to do,anything for me"
That's not very positive.
What else? Can't I download iPad drivers,into my computer?

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
 Cheers, Tom

ABAP ROUTINE AT INFOPACKAGE FOR DATE RANGE

hi all,
I want to Schedule my infopackge with selection options
0DATE infoobject with First date of current month( 01.02.2008) to last date of current month ( 29.02.2008).
this i have to get automatically bcoz i have to use this in process chain.
so I want to write a routine for this at the infopackage level with ABAP Routine -6 option.
So please suggest me how to write the code for this case.
thanks,
kiran manyam.

Hi Kiran,
Please paste the following code there and also check for syntax error.
data first_date type d.
data last_date type d.
first_date = sy_datum.
first_dat+6(2) = '01'.
CALL FUNCTION 'SLS_MISC_GET_LAST_DAY_OF_MONTH'
Exporting
DAY_IN = first_date
Importing
LAST_DAY_OF_MONTH = last_date.
          read table l_t_range with key
               fieldname = 'DATE'.
           if sy-subrc = 0.
               l_idx = sy-tabix.
               l_t_range-sign = 'I'.
               l_t_range-option = 'BT'.
               l_t_range-low = first_date.
               l_t_range-high = last_date.
               modify l_t_range index l_idx.
            else.
               move 'DATE' to l_t_range-fieldname.
               l_t_range-sign = 'I'.
               l_t_range-option = 'BT'.
               l_t_range-low = first_date.
               l_t_range-high = last_date.
               append l_t_range.
               endloop.
            endif.
          p_subrc = 0.

Any way to test itunes to see if its working properly?

Is there any way to test Itunes to see if it's running correctly? It's been crashing on me often and I don't know why.

See if this helps. http://www.methodshop.com/gadgets/ipodsupport/diagnosticmode/index.shtml

Why can't I see my data which was entered and saved on a form when i try to reopen it? it always worked before until this spring 2014. The data is actually there when I click on a box but disappears when I go to the next box. I have a Mac.

I am using a Mac and I have always filled out the same form (ocf-6 from ontario insurance companies, application for expenses) It stopped letting me go back and open the previously saved forms which i filled out and I have saved monthly for the past 5 years. Now when I open a previously saved month /file I cannot see the data I inputed. The data is there because when i highlight a box the data appears. then when i move onto the next field/box it disappears. I tried to highlight the whole document but nothing shows up. This problem started in the spring ,2014.

Once you save that to a location on your system.
Make sure Acrobat is Quit and then do this:
1. In the Finder go to the "Go" menu.
2. Select Go to Folder
3. Paste this path into the "Go to the Folder:" field
/Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro/Contents/Resources/JavaScripts/
4. Copy the file into the JavaScripts folder.
5. Launch Acrobat
Now you should see the menu spoken of in the blog and web page.

I'm trying to set up Family Sharing. My settings show that the people I chose are there but I don't see any shared information. How do I access the shared info?

I'm trying to set up Family Sharing. My settings show that the people I chose are there but I don't see any shared information. How do I access the shared info? All computers are using Yosemite 10.10.1 and are new 13" MacBook Pros.

Hi wmcknigh,
Welcome to Apple Support Communities.
The article below should help you resolve the issue with shared content not appearing after setting up Family sharing on the MacBook Pros.
If you don't see your family's shared content - Apple Support
Cheers,
-Jason

I need to update my phone, but my computer broke, and do not have a new one. I have an Itunes account, can I use someone else computer to go through with the update? Is there a chance of loosing all my data, ie: music/photos?

I need to update my phone, but my computer broke, and do not have a new one. can I use someone else computer to go through with the update if i log on with my itunes account or Is there a chance of loosing all my data, ie: music/photos? And if all else fails can i go to the apple store and have them update my phone?

Update to what? The 3G you want to update? You have ios3 or 4 on that 3G?
Go to a friend, authorize that pc.
Read this : http://support.apple.com/kb/ht1848
and this : http://support.apple.com/kb/ht2519
Make a backup of your stuff (from the phone. apps/photos/music/blabla). Update your phone. The phone will restore the backup automatically.

Is there a way to retain the original date after editing?

I am using PSE 11 on a MacBook Pro, OS X (10.3). I have a lot of old pictures to edit, and they are in date order, which is how I want them.
However, when I edit a picture and save it, it moves it to the bottom, with today's date instead of the original date. I have them set to save with the original as a version set.
Is there any way to retain the orignal dates, short of having to go in and reset the date on every picture after I save it? I really want them to be in date order under their original dates.
BTW, I used earlier versions that were Windows-based, and this didn't happen. When I saved them, the version sets stayed where they were.
This is really frustrating!

SK Prairie Chicken a écrit:
I'd like an answer to this too.
What's your problem exactly?
The 'date taken' is never changed by editing a picture.

Is there any way to export IT Resource data from OIM using the export tool?

Hello,
we are trying to migrate an OIM development environment to a preproduction environment and we need to migrate more than 400 IT Resources. We have exported some IT Resources and when we imported them in the preproduction environment their data was not migrated. Is there any way to export IT Resource data from OIM using the export tool? Or is there any other way to do this without doing it by hand?
Thank you for your help
Kind Regards

Well , OIM doesnot provide any such facility to export ITResource data along with ITResource .
Directly updating the DB could be an option ..
Thanks

HT201299 Is there an App which switches on Cellular data at a Particular time of day and switches off as well? if not someone should make an app

Is there an App which switches on Cellular data at a Particular time of day and switches off as well? if not someone should make an app for that

No, there are no apps that can do that, as no app would have access to the necessary API's to perform such a task.

Obfuscated Toolkit: Is there a test routine to see if data is encrypted?

Similar Messages

Maybe you are looking for