OBI Applications - Installation Questions

We would like to install OBI Applications on a Windows XP box. We have already installed OBIEE in one of our boxes. Can we install OBI Applications in the same box in which we have installed OBIEE. Will I run into any perfomance issues if we have both OBIEE and OBI Applications in the same box. The configurations of the box are provided below.
Xeon 2.8Ghz / 2GB Memory / Dual processor / 146GB *3 HDD (Raid 5)
Let us know.
Thanks,
-G

The BI Applications are a package. The Informatica ETL components, which amount to over 2000 individual pieces are dependent on Informatica.
It is certainly possible to use BI EE with another ETL tool to create a similar environment but that defeats the whole idea of a packaged Analytical Application.
BI Applications provide enormous ROI and reduce delivery schedules from Years to Months.
Read up here and you will see why:
http://www.oracle.com/solutions/business_intelligence/obia.html
Yes, I do work for Oracle so I am biased but feature for feature, no one else comes close at all.

Similar Messages

Re: Question re use of Toshiba Application Installer

Hey all.
My model came with Toshiba Software Modem installed, but I've noticed in the Toshiba Application Installer there are a couple of other modem drivers that are a little newer. I installed one of them (Conexant) then uninstalled the Toshiba Software Modem and reboted. When it started, it reinstalled the Toshiba Software Modem by default.
So my question is, is it possible to install and use anything other than my original modem? I'm not even sure if it installed the Conexant. It looked like it did but it doesn't appear in the list of installed programs.
As I said, the Toshiba Software Modem was the original, the other two are Conexant Software Modem Driver and Motorola Modem Driver. I don't know why those other two are even in there if they can't be used with my system.
L305-S5919; Vista 32 bit
Thanks!

I read in an article about software modems (Winmodem) that said a newer driver can make a difference.
"Winmodems, unlike hardware modems, have complicated driver software. Driver upgrades can thus make a significant difference to Winmodem performance. If you use a Winmodem, check the manufacturer's Web site to see if you can get a later driver."
I have dial-up and I know it's not going to make a huge difference but I thought it wouldn't hurt to try something different, if possible. The three modem files that are available for my system are listed at the Toshiba website, but the same versions are also available in my Toshiba Application Installer.
I don't really understand software modems. I've got Toshiba Software Modem by Agere, but I don't really know if that's the modem or the driver or both. Do the Toshiba L models even have modem hardware? And I don't get why those other two drivers are in my Toshiba Application Installer and are listed at the website as compatible with my system if they're useless.
Maybe the Agere is the modem and the other two are drivers for it?
In C:\Program Files\Toshiba\TOSAPINS\COMPS1, there are text files that accompany each modem driver that say, "These drivers are required for your machine to be able to fully utilize the modem."

When creating an application installer in LV, what run-time engine or driver must be installed to install the VISA interactive control?

I've created an application installer using LabVIEW's application builder and use it to install NI MAX. However, after running the installer, the VISA interactive control is disabled in NI MAX.
The installer installs the following NI components: NI LabVIEW Run-Time 2014 SP-1(64-bit), NI LabWindows/CVI Shared Run-Time Engine 2013 SP2, NI Measurement & Automation Explorer 14.5, NI-488.2 Application Development Support (includes run-time), NI-VISA Configuration Support 14.0.1, NI-VISA Runtime 14.0.1, NI-VISA Server 14.0, NI Systems Configuration Runtime 14.5.0, vision run-time, dc-power run-time.
If I download and run the 488.2 installer, the VISA interactive control is enabled in NI MAX. But, the installer created with the application builder does not seem to install the necessary components.
What needs to be added to the installer to enable the VISA interactive control (VISAIC)?
Thanks.
Solved!
Go to Solution.

From Pedro Munoz, Applications Engineer, National Instruments
Sorry for the confusion with the forum post that Jon sent you. I did some research on our internal database and I found out the component will not be installed by any of the components added from the additional installers section on the configuration of the installer. As you have already found out you need to install the full installer in order to enable this feature.
I know that this might be an inconvenient for you because you wanted to have one installer to run. On this case may I suggest using the NI Batch Installer Builder.
The NI Batch Installer Builder allows building installers that contain National Instruments software from several products. That way you can create an installer for you application in LabVIEW (and not include the drivers in the additional installer section), then use NI Batch Installer Builder to include the installer for your application and the full version of the drivers that you mentioned.
Here is the download link:
http://www.ni.com/download/ni-batch-installer-builder-14.5/5193/en/
And in here you can find instructions on how to get started with it:
http://zone.ni.com/reference/en-XX/help/374206A-01/
Let me know if you have any question.
Regards
Pedro Munoz
Applications Engineer
National Instruments
http://www.ni.com/support

Deployment Status not reflecting correct application installation status

Morning All,
Running into an issue where the application Deployment Status does not properly reflect the state of the application install.
The software installs, works properly and is reported in Software Center on the client PC as being installed succesfully however the status within CAS shows "In Progress" with a description of "Program started".
The application in question is Cisco Network Access Manager which terminates the network connection and requires a reboot before restoring. Additionally the site is behind a NAC switch which adds another layer of security to the network at that loation.
Currently I have deployed to 90 test machines - 65 of which have reported in as succesfull, the remaining 25 have installed and are working but are not being updated in the Deployment Status.
I have checked the Sender.log on the site server and link analyzer between the primary & secondary. I have also checked the client heartbeat and statemessage.log all seems well - no errors reported.
Additionally I have reviewed the WMI status on the client and repaired (just in case).
Through google search I have also ran the following:
Option Explicit
On Error Resume Next
Call RefreshServerComplianceState
' WScript.Echo "Finished"
Sub RefreshServerComplianceState()
' Initialize the UpdatesStore variable.
dim newCCMUpdatesStore
' Create the COM object.
set newCCMUpdatesStore = CreateObject ("Microsoft.CCM.UpdatesStore")
' Refresh the server compliance state by running the RefreshServerComplianceState method.
newCCMUpdatesStore.RefreshServerComplianceState
' Output success message.
' wscript.echo "Ran RefreshServerComplianceState."
End Sub
As well as forcing a check in from the client and running the summarization on the CAS.
So far nothing seems to trigger an update. I'm hoping someone can point me in the proper direction in regards to diagnosing this problem.
Many thanks, Jeff

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Installation Questions Documaker 12.3 Enterprise Edition

We are looking to install Documaker 12.3 Enterprise Edition and have the following installation questions:
When installing Documaker can we have our own VM in our own OU for the WAS application servers? This will make maintenance easier on our side. There doesn’t seem to be anything in the documentation saying this is a good or a bad idea.
Our WAS Admins would like to know what the scripts in the Post-Setup documentation actually do. Is it possible to use our existing scripting environment to build the necessary pieces instead of using scripts from the documaker install? If it’s not possible, can we get a look at the documaker scripts before we run them?
We would like to know if WAS 8.5 is supported, or if version 7.0.0.27 in the requirements pdf is the only version supported?

When installing Documaker can we have our own VM in our own OU for the WAS application servers? This will make maintenance easier on our side. There doesn’t seem to be anything in the documentation saying this is a good or a bad idea.
The typical installation scenario is to have 3 tiers - application (WAS), application (Documaker), and data. WAS tiers host web applications (Dashboard, Administrator, Interactive) as well as providing database connection pools and JMS queues for messaging - it is expected that the WAS environment is a clustered environment and that the applications are deployed to the cluster members, which can be physical or virtual. For the Documaker application server, these can be physical or virtual as well. It's recommended to install Documaker on single-purposes environments, however there's nothing to prevent you from doing otherwise. The Documaker applications are self-contained JVMs and can be tuned accordingly.
Our WAS Admins would like to know what the scripts in the Post-Setup documentation actually do. Is it possible to use our existing scripting environment to build the necessary pieces instead of using scripts from the documaker install? If it’s not possible, can we get a look at the documaker scripts before we run them?
The installation process (currently) writes the scripts according to responses provided during the installation process. The scripts can be reviewed/modified prior to execution.
We would like to know if WAS 8.5 is supported, or if version 7.0.0.27 in the requirements pdf is the only version supported?
The official supported version of WAS is 7.0.0.27, however WAS 8.5 may be suitable (I believe there might be a fix pack requirement there - would recommend you submit a question to Oracle Support for verification).

Regarding Oracle BI Applications Installation

Hi all,
I was going through the documentation of Oracle BI Applications, probably the old version.
I. Was DAC previously installed as one of the component along with Oracle BI Applications installation?
Now i have installed Oracle BI Applications version 7.9.6.1. and DAC is not installed with it. It is available as seperate package from OTN website.
Old Documentation says: "Installing DAC is part of the *Oracle BI Analytics installation*", refering to what is said: what i learnt is there are:
1. "Oracle Infrastructure Installation"
2. "Oracle BI Applications Installation"
3. "Informatica Powercenter Installation"
4. "DAC Installation" as seperate package.
II. what does he mean by *"Oracle BI Analytics installation"*? is it part of any one installation mentioned above or is a seperate installation.
Regards,
Sreekanth.

I. Was DAC previously installed as one of the component along with Oracle BI Applications installation?It's a separate installation
Now i have installed Oracle BI Applications version 7.9.6.1. and DAC is not installed with it. It is available as seperate package from OTN website.Correct, you have to install it separately
II. what does he mean by *"Oracle BI Analytics installation"*? is it part of any one installation mentioned above or is a seperate installation.The OBIA documentation is not very good, it has lots of ambiguities like the one you quote.
http://rnm1978.wordpress.com/2009/07/30/what-is-obia/
You basically need to install:
Informatica Server & Client
DAC Server & Client
OBIEE
Informatica metadata (repository)
DAC metadata (repository)
OBIEE metadata (repository RPD and WebCat)
Datawarehouse schema

OBIA 7964 Installation on Linux

Required Information for OBIA 7964 Installation:
Installing Database
Creating Repositories or Schema using RCU
Installing OBIEE11g on windows
Installing OBIA using installer
Installing 11g on linux before you move the files.
Moving respective files / folders to Linux.
Questions:
Can we install OBIA 7964 on windows 7 / xp using the installer.
After moving the files / folders to linux can we remove the installation on windows.
Please help us on the above questions.

1- Yes u can install OBIA 7.9.6.4 on windows.
2- Yes u can de-install OBIA. u can de-install (uninstall) same like normal program like by Going to Control panel then 'Program & features) then u will see OBIA in list.

How to use 7.9.5 OBI Application to work in 11g

Hi,
I have 10G Platform and 7.9.5 OBI Application. Now I need to use 11G Platform and 7.9.5 OBI Application. Will it be feasible? Also can I use my existing ETL Informatica mappings in the Upgraded Platform?
Thanks..
ChD

Hi Experts,
In addition to the last question I have another query.
I have an OBI application that is 70% customized and is in 7.9.5. It has the Informatica Mappings/Webcat/RPD etc.
Now I need to have the application in 7.9.6.2. Will it work if I Install fresh application 7.9.6.2. Migrate the existing Reports/ebcat/Informatica mappings/RPD etc. from 7.9.5.?
Any advice would be of great aid.
Thanks..
ChD

Initiate Application Installation from App Catalog via Command Line / PowerShell

Hey Guys -
We have a single, fairly extensive OSD task sequence which covers systems for all departments. Due to it being a single TS for all, PC Lab techs must manually install some apps after it finishes via the Application Catalog. In past environments,
I've used MDT's UDI Wizard to create a frontend where techs could select additional software they wanted installed during the TS and it worked great! I'm trying to get something like that approved now, but in the meantime told the techs I'd come up with
a temporary solution to make their job easier.
Enter WPI (Windows Post Installer.) Back in the days before I used SCCM OSD and relied in Acronis images (yuck), I used a the WPI tool which only ran once - at the first login - even before the desktop
loaded. It's highly customizable and basically shows a single window which lists any applications or scripts (in groups) which you have configured. You place a checkmark beside each one you want to install, click the "Install" button,
then watch it's installer frontend install each of the selected apps. Once done, it either restarts the PC or exists to the desktop. For each application I can add, I'm provided with a few options to
install it. Obviously, an installation command line string field, but also a few more like installation order, requirements, and dependencies.
My Question
Each of the applications I've listed are in our Application Catalog and are advertised to All Users. Even though I could simply point the installer string to the app's source path and use the same string that the SCCM Application uses, I've been asked
to do something different. Instead, I'm trying to find a command line string which when run would perform the same action as if a user had selected to install an Application from the Application Catalog.
My thoughts are that if this is possible, it would probably be in the form of a PowerShell string - not just a basic command line one. Since WPI has a frontend which shows the progress of each app's installation progress as well as overall progress,
it's designed for the installation strings to install the app silently. Therefore, I would much prefer my solution run silently as well if possible.
So... does anyone have any idea for how I can make this happen? Thanks!
In case it makes a difference or answers any questions, below are two screenshots showing most of the fields and options which may be used to configure how an application installs in WPI. I couldn't include the Dependencies one since I could only
attach two images to my post. Also, the manual for WPI is embedded in the application's
download (ZIP) and not a page on their site. For the examples below, I used Google Chrome, but didn't configure anything besides the application's name:
Application Detail Options
Application Command Options
Ben K.

From what I'm reading, you are working towards MDT but it's not approved yet, so the goal is to:
Deploy a "bundle" of applications as painlessly as possible without using UDI to make customizations quick.
Lets talk options then.
Option 1: If machines types are in a unique OU or security group, create a collection for that and set these applications to mandatory install. After initial deployment, the provisioner can drop the computer in the proper OU or group and you're
good to go. Downside: collections refresh plus client check-in makes this less than instant.
Option 2: Orchestrator. You can write a runbook that will approve and push apps. You can then use the Orch console front end or a more friendly sharepoint/SM portal to push things out like a Manager would approve apps. Downside: if
not already deployed, there's no way they would approve that infrastructure if they are hesitant about MDT/UDI :)
Option 3: PowerShell and WMI. This should be doable ... but I've never tried it. It looks like you're headed down the right path ... but i guess my question is: if you can't have UDI when do get to pick the app? Are you planning
to write a full multi-box for them to check their apps after the fact? In that case ... just have the appcontroller URL pop up on first login ... might be easier than reinventing the wheel.

Users for OBI Applications

Hello,
I am confused with item 4.4.1 from OBI Applications 7.9.6.3 installation manual... I´ve copied it bellow:
+"The transactional (OLTP) database user that is registered in DAC should be the+
+database table owner. Alternatively, at a minimum, the user registered in DAC+
+must have read privileges on the transactional database for all tables and aliases.+
+For Siebel CRM databases, the OLTP database user requires privileges to create+
+triggers and views on all tables and aliases."+
I cannot quite understand... The OLTP database user that is registered in DAC >> pls. Is this the dac repository owner ? The one we do the login in DAC ?
The next paragraph says... the OLTP database user requires privileges to create... >> I imagine that is the same user as above ?
Pls. I would appreciate comments and help :))
txs
Antonio

Txs. for your comments...
Well, I have done an implementation using DBA as privileges... but that is not the current case.
I understand you saying about the physical connections - but if I remember correctly -- this connection needs a user/pwd...
I do have something like below, but I am not sure it is correct... like BIDAC privileges below... (also I´ve seen doc in support: ID 513063.1 but it is kind of old and not clear)
I would appreciate comments... suggestions.
Txs.
Siebel Database - SIEBEL
*· Informatica – BIREP*
o   Connect
o   Resource
o   Create and Drop Indexes and Views
*· DAC Repository – BIDAC (Privileges in SIEBEL and BIOBW)*
o   Connect
o   Resource
o   Create Trigger
o   Create View
*· Oracle Business Analytics Warehouse - BIOBW*
grant SSE_ROLE
o   Connect
o   Resourceo Create View

Custom AIR application installer

Hello,
I have one question about air application installation process.
Is there any way to build a custom air application installer?
How it works now:
First I've made air project, and when I start installation process (over badge swf file on the web site), I've going through next steps:
- On the first step I can to open or save installation .air file.
- After I click on the "open" button, I've getting the info about publisher and application, and I have "install" and "cancel" buttons.
- After I click on the "install" button, I've getting more options, about desktop shortcut icon, installation location, and I have "contionue" and "cancel" buttons.
- After I click on the "continue" button, the installation process begins.
Is there any way to put some steps out from the air installation process. For example, to put out the third step?
The best for us would be, if is possible, to integrate all questions in only one Accept or Cancel, make the most simple for user to install. Do you have advice how to do it?
Thank you

Not using a web install badge. What I have done in some cases is a first-run configuration setup UI as part of the app itself.
You can create a custom native installer (not in AIR) for AIR apps using the captive runtime:
http://help.adobe.com/en_US/air/build/WSfffb011ac560372f709e16db131e43659b9-8000.html
-Aaron

Error Installing Adobe Air from Story Desktop Application Installer

This is truly driving me nuts already.
Every time I try to install the Desktop Application from the Story website, it says I must install Adobe Air. So I click Install, it shows the progress bar to 100%, then errors out with a window. The window header reads "Adobe AIR Installer" and the main section of the window reads "Couldn't write the application to the hard disk. Please verify the hard disk is available and try again." - There is a Retry and Cancel. Retry does it all again with same results.
No, I had no previous versions of Adobe Air. So I tried installing AIR direct from the Adobe website, and it installs fine. So I go back to the Story webpage and try installing the Desktop Application again and the exact same set of events as described above happens. I uninstalled the AIR install, tried again, same result.
I had Production Premium CS3 previously, and installed Production Premium CS5 UPGRADE. All the programs in the suite work like a charm!
I'm running Windows 7 64 bit with 208 Gig free on my C drive, as well as over 500 gig free spread out over two other drives. 8 Gig memory, and two Nvidia Qadro FX 3500 video cards (If that matters at all). Full admin rights to the PC, not limited in any way.
A quick Google search shows plenty of other people having the same problem, just no known fixes I've found!
HELP!!!
PS- I have a picture of the error message, but the insert picture link is greyed out and won't let me add anything to this post.

Here is the installer log entries as requested:
9/3/10 11:34:54 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] Starting app install of file:///Users/Shared/Downloads/AdobeStory.air
9/3/10 11:34:54 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] UI SWF load is complete
9/3/10 11:34:55 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] UI initialized
9/3/10 11:34:55 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] beginning UI styling
9/3/10 11:34:55 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] UI styling complete
9/3/10 11:34:55 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] Unpackaging to /private/var/folders/dJ/dJl0jNt6GK4MiC2esOh-GU+++TM/TemporaryItems/FlashTmp0
9/3/10 11:34:58 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] unpackaging/validation is complete
9/3/10 11:34:58 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] application is bound to this version of the runtime
9/3/10 11:34:58 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] app id com.adobe.AdobeStory
9/3/10 11:34:58 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] pub id 4875E02D9FB21EE389F73B8D1702B320485DF8CE.1
9/3/10 11:34:58 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] Application located at /Applications
9/3/10 11:34:58 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] The certificate of the installed app fails to match either the signature or migration signature of the AIR file
9/3/10 11:35:01 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] starting cleanup of temporary files
9/3/10 11:35:02 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] application installer exiting
9/3/10 11:35:02 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] application installer exiting
9/3/10 11:35:02 AM com.apple.launchd[223] ([0x0-0x40040].com.adobe.air.ApplicationInstaller[344]) Exited with exit code: 9
Thank you for your help.

Application installer not working with PC Suit App...

I have a Nokia E60 and Windows XP SP2. After installing PC Suite 6.82.96.4 I try to open the App. installer but it opens and closes inmediately (blinks) but do not work. I try to do the installation through the File manager, and I can see and open the Nokia browser, phone memory etc, but whenever I try to install, the following message is shown Nokia Application Installer has encountered a problem and needs to close. We are sorry for the inconvenience. Detail is: Error signature AppName: applicationinstaller.exe AppVer: 6.82.96.4 ModName: unknown ModVer: 0.0.0.0 Offset: 90909090 It also shows that there is an error report that I cannot find C:\DOCUME~1\rodrigm3\LOCALS~1\Temp\9e61_appcompat.txt Could you please help me to fix the problem? thanks a lot

Regarding my problem, I attach the log file generated in the error report in case it can help to the Nokia support (or anybody able to help...) It should have to be a PC config problem, as I am totally able to install application with the same version of PC Suite in other colleagues PCs Thanks for your support....
Attachments:
42cb_appcompat.txt ‏63 KB

Adobe Air application installation using the bundled runtime installer

Hello.
We plan to develop application for different platforms with Adobe Air and testing installing Air applications with bundled runtime installer on different platforms. It's ok with Windows and Mac OS, but we got troubles with "silent" installation on Ubuntu OS 9.10.
I tried to install Adobe Air application with bundled runtime, like in this document in part "Silent installation":
http://help.adobe.com/en_US/air/redist/WS485a42d56cd19641-70d979a8124ef20a34b-8000.html
using command-line:
"sudo ./MyInstaller -silent simple-air-air-application-1.0-SNAPSHOT.air"
and installation fails. Installation log looks like this:
[setup:2306][INFO] Runtime Installer begin with version 2.6.0.19140 on Linux x86
[setup:2306][INFO] Commandline is: -silent simple-air-air-1.0-SNAPSHOT.air
[setup:2306][INFO] No installed runtime detected
[setup:2306][INFO] Invoking Application Installer for combined install
[setup:2306][INFO] Launching subprocess with commandline /tmp/air.QMrLZl/build/opt/Adobe AIR/Versions/1.0/Adobe AIR Application Installer -runtime /tmp/air.QMrLZl/build/opt -silent -withRuntime -url file:///tmp/air.QMrLZl/simple-air-air-1.0-SNAPSHOT.air
[setup:2306][ERR] Subprocess app installer failed (-1)
[setup:2306][ERR] Runtime Installer end with exit code 7
P.S. We tried do the same on Linux Mint 10. Everything's fine, application getting installed well.

Thanks for the reply and solution MrSykes.
I uninstalled adobe AIR and ran a file and registry cleaner to delete any left over files and installs.
Then installed the v.15 Adobe AIR beta as recommended.
The cleaners I used (ccleaner & jv16 power tools) did find some temporary install files and remnants of the Video Alchemy install.
Tried the install again and still no installation window displays.
I'm running Windows 7 on my PC and even changed the installation file compatibility to Windows XP service pack 2 to no avail.
Funny that it installed fine on my notebook with Adobe AIR latest version running Windows 7.
I'm watching task manager as I'm attempting the install and videoalchemy.exe has some cpu usage then drops to zero activity.
Then Adobe AIR application Installer starts up then cycles to zero cpu activity.
I'm stumped on this one :-(
Thanks again for investing the time on my behalf.
Regards
Stephen

Adobe AIR Application Installer.exe

On my win xp pro sp3 machine from all the Adobe stuff
following software installed only:
- acrobat reader
- flash player
- shockwave player
The Secunia scan tool noticed me recently I had old version
of flash player.
It is not right, some days ago just upgraded to 9.0.151.0.
Why I am using the 9.x one see my other thread in the adobe
flash player forum.
In-depth analysis has shown that the old one is really
present on my station:
Adobe AIR Application Installer.exe is present on this
machine and it keeps the old and
vulnerable version of adobe flash player.
What for ???????
I didn't ever install the air application installer on my
own.
It must be one of other three applications I'm using
intentionally.
What of the three application named above has installed AIR ?
And what for ?
Why is nobody upgrading the vulnerable flash version attached
to AIR ?
How can I deinstall it ?

quote:
Originally posted by:
tzeng
You can uninstall AIR by using the uninstall program control
panel. Just like uninstall an application.
AIR doesn't figure on the Add/Remove Programs list.

OBI Applications - Installation Questions

Similar Messages

Maybe you are looking for