OBIEE 11.1.1.6.5 - selection steps on a calculation does not work correctly

I have a tabular report with a hierarchy column (cost centre) on the left, which is displaying at the top level (total company). The report has a metric for actual ytd, one for budget ytd and a calculation for variance (actual ytd - budget ytd).
When I add a selection step to keep only the top 10 cost centres at the bottom level of the hierarchy based on the variance, the report returns the top 10 cost centres based just on actual ytd ie only the first part of the calculation. It seems to ignore the whole calculation even though it has brackets around it. The selection step appears to be written correctly when I view it in the report but it is not working as I expect.
Has anyone got any thoughts on why this might be and if there is a solution. I have put brackets around the entire calculation, but it doesn't seem to make any difference, it still bases its selection on the first measure it finds in the calculation.

Just curious - do you have multiple "pages" of information - like maybe a time dimension in the paging prompt? I've found numerous issues where, if you have multiple "pages" of info, selection steps completely ignore what page you are on and returns results for the whole set....which is exactly not what any of my end users expect to happen....
Scott

Similar Messages

In LabVIEW OI the Run Selected Step Using Test UUTs does not work

TestStand LabVIEW Operator Interface (old style) - TestStand Version 2.0.1 & 3.0
The Interactive option was enabled for the Process Model Entry Point - Test UUTs in the SequentialModel.seq.
When selective steps were selected to run within the LV OI using the menu item 'Run Selected Step Using - Test UUTs' it was found not to work.
The reason for it not working was because the main event string was "Run Selected Step 0" but this isn't available in the case statement. Changing the "Run Selected Step 1".."Run Selected Step 9999" to "Run Selected Step 0".. didn't produced the desired result. Instead of the selected steps running using the entry point Test UUTs, the steps ran without the process model.
The Case Statement string was retored back to "Run Selected Step 1".
The changes that are required to make the "Run Selected Step 1".."Run Selected Step 9999" work with either of the Entry Points are as follow.
In the VI TestStand - Create Entry Point Menus for Interactive Exec.vi
Insert an Increment from the iteration terminal of the FOR loop. This ensures the Message Queue string generated is in the range 1 - 9999 not 0 - 9999.
In the TestStand - Sequence Display.vi
For the Main Message Event "Run Selected Steps", "Run Selected Step 1".."Run Selected Step 9999"
In the case "1, Default", decrement the input 'Entry Point Index' to the VI TestStand - Start Interactive Entry Point Execution.vi. This ensures the Entry Point Index starts from the value 0.
Now when the selected steps are run using a Pocess Model Entry Point, they run correctly.
This problem only appears to affect the LabVIEW Operator Interface and only the old style. The new style that comes with TestStand 3.0 runs correctly.
There is one other problem. When an Operator is logged in to TestStand, the Entry Point - 'Single Pass' is disabled. But this is not reflected to the menu item 'Run Selected Step Using'. Both 'Test UUTs' and 'Single Pass' are available to the operator.
The reason for this is because in the VI 'TestStand - Create Entry Point Menus for Interactive Exec.vi' the sub menu item is enabled as a result from the property Sequence.AllowInteractiveExecutionOfEntryPoint. This is not enough to disable the 'Single Pass'. The Engine.CurrentUserHasPrivilege needs to be checked as well. Which means modications to the VI 'TestStand - Create Entry Point Menus for Interactive Exec.vi'.
Hope is maybe of help to anyone that may need to use this option.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
In_Labview_OI_-_Run_Selected_Steps_Using_Test_UUTs_doesnt_work.txt ‏3 KB

Thanks Ray for the "heads-up". )
I am about to implement a vi which calls TestStand functions. This vi will allow to select tests and permits test re-entry (loops) if the user has supervisor privileges.
I will consider what you recommend in this string.
I will also provide feedback on this thread if I discover anything .... let's say "unusual"..
On another note, I am using TestStand 3.0 I have not observed any problems when running selected steps or run selected steps using single pass. I have also within TestStand set privileges for certain Operators to do the same. They have not reported any problems.
Thanks,
JLV

Why does right clinking on link and selecting open in new tab does not work?

Why does right clinking on link and selecting open in new tab does not work?
It opens up a blank page. The only way to make the link work is to click on the navigation bar in the new tab and press enter to reload the link.

Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. 
2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

'select all' in pages 'shapes' does not work

When drawing 2-D floor plans using Pages / Shapes......the 'Select All' function does not work !
I am uisng Mountain Lion, v 10.8.3
Any help will be appreciated
Thanks
Sheldon

Hi Sheldon,
Is your document based on a Page Layout Template?
In Pages, a floor plan is more suited to a Page Layout document (which mimics a drawing app) rather than a Word Processing document.
Here is a document that I created with Template Chooser > Page Layout > Blank.
I added some Shapes and Text Boxes.
'Select All' (command a) selected everything:
I hope this helps.
Regards,
Ian.

Select All in a table does not work for Drag and Drop

Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-Ed

Frank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed

Select list with bind variable does not work

Hi,
What can be wrong with a 'select list' with the a simple select
select omschrijving o, id i
from basiscodes b
where domein = 'OPTIES'
and b.id in
(select eo.basiscode_id from evenementen_opties eo
where eo.event_id = :P16_ID)
The :P16_ID has a value and should give result
But it does not work at all with 'select list'
Using the POPUP LOV (display discription, return key value) works nice
The select retuns less then 10 records

Hi Flavio,
As I explained, the P16_ID is an item of the master page (page 16)
In Page 18 where I want to reuse that value, the item is not there, but I use it to assign
P18_EVENT_ID with the value in P16_ID and that works fine.
In an after submit process, I do this :
declare
function get_pk return varchar2
is
begin
for c1 in (select EVENEMENT_INSCHRIJVING_SEQ.nextval next_val
from dual)
loop
return c1.next_val;
end loop;
end;
begin
:P18_ID := get_pk;
:P18_EVENT_ID := :P16_ID;
:P18_CREATIE_DT := TO_CHAR(SYSDATE,'DD-MM-YYYY HH24:MI:SS');
:P18_CREATIE_USER := APEX_APPLICATION.G_USER;
end;
The value P16_ID is there before I open page 18
I made a display item that displays the value P16_ID
If I change the LOV select in :
select b.omschrijving o, b.id i
from basiscodes b
, evenementen_opties eo
where b.domein = 'OPTIES'
and b.id = eo.basiscode_id
and eo.event_id = 16
then it returns the value I want : 1 record
You see, I'm a really new one in apex.
Forms 6i was easier for me...
Regards Jules
null

The "portable document format" icon is a Word 2010 icon, so selecting Adobe Reader as action does not work to display the PDF.

In the Applications tab -- Content Type -- the "portable document format" icon is a Word 2010 icon (not Adobe), so selecting Adobe Reader or preview in Firefox as action does not work to display the PDF. I can see this Applications difference because my other Firefox laptop has the Adobe icon, and I can view PDFs. Essentially, a PDF is coming in as a Word document -- and the computer tries to open it up as a Word file.
How do I get the correct PDF icon in the Applications list -- the same way it displays (and works) on my other laptop.

Adobe PDF Plug-In For Firefox and Netscape 10.1.7 ?
I think you need to add this to the list of applications and the action to take on the type of content. This can also be managed in the about:permissions page. [[Permissions Manager - Give certain websites the ability to store passwords, set cookies and more]]

HT201442 What is the next step if the above does not work?

What is the next step if following the steps on the web site does not work?

You take that step, what ever it tells you, when you get there.
No reason to project....

The select with for all entries is not working correctly

IF NOT i_ekko_ekpo[] IS INITIAL.
    SELECT ebeln
           ebelp
           zekkn
           vgabe
           bewtp
           menge
           bpmng
           shkzg
           INTO TABLE i_ekbe
           FROM ekbe
           FOR ALL ENTRIES IN i_ekko_ekpo
           WHERE ebeln EQ i_ekko_ekpo-ebeln.
            AND ebelp EQ i_ekko_ekpo-ebelp.
    IF sy-subrc EQ 0.
      SORT i_ekbe.
    ENDIF.
ENDIF.
I have a PO with 2 line items in i_ekko_ekpo. In EKBE, I have 49 recs for this PO and this select is returning only 13 recs.
I tried by commenting EBELP and still the same result.
Thanks
Kiran
Edited by: kiran dasari on May 22, 2009 9:56 PM

Hi Sudhi, I added these now but still no charm
    SELECT ebeln
           ebelp
           zekkn
           vgabe
           bewtp
           menge
           bpmng
           shkzg
           INTO TABLE i_ekbe
           FROM ekbe
           FOR ALL ENTRIES IN i_ekko_ekpo
           WHERE ebeln EQ i_ekko_ekpo-ebeln
             AND ebelp EQ i_ekko_ekpo-ebelp
             AND zekkn GE '00'
             AND vgabe IN ('1','2').
And as per your note: in the 13 entries, am having duplicate also. This is something weird for me now.
Any more clues.
Thanks
Kiran

Using right mouse click in bookmarks and selecting new tab or window does not work anymore in firefow 4.0. no new tab or window opens. Still works if you open new via File menu.

When you select bookmarks, find the bookmark you want, then right mouse button click you get a drop down menu giving you the chance to open a bookmark in a new tab or new window. This no longer works with firefow 4.0

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Right click on a link and selecting "open in new window" does not work. How do I gewt this feature to work? PS Right click on a link and selecting open in new tab does.

No matter where the link is - in an e-mail or on a web page - the "Open in new window" feature does not work. Very annoying. Also I close Firefox in a session, but then cannot re-open it. When I shut my PC down I get a prompt to End Task -[ Firefox ] and a window opens asking if I want to save tabs and quit; quit; or cancel. After closing Firefox it does not show as an application running in Task Manager
== This happened ==
Every time Firefox opened
== I recently re-installed Firefox.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

I am attempting to upload multiple photos on a macpro from a cd. I am used to a pc. I tried using the command button to select multiples but it does not work. Please advise

I am attempting to upload multiple photos on a mac pro from a cd. I have tried holding the "command"button down to select multiple photos but it does not work. Please advise. Thanks,John

why not sort by (name, date, etc) and Click on 1st and Shift-Click on last.
Might work better to copy or import to a project folder.
https://discussions.apple.com/community/ilife/iphoto
http://www.apple.com/support/iphoto

Middle select button not working correctly?

I have a nano second generation and the select button in the middle is not working correctly. I have to keep pushing it and pushing it to get it to work and now it's not working at all. Any ideas?

Try Restoring it. If that doesn't work you need to have it serviced. You can either take it by an Apple Store and make a Genius Bar appointment or send it here:
http://depot.info.apple.com/ipod/

I have F.F 3.6 and windows 7.: 1) When i want to buy a airplane ticket and want to select 2 adults or 2 children, the draw down select, does not work in any websides,? WHY?. 2) Have FF any problems with SKYPE

I have F.F 3.6 and windows 7.: 1) When i want to buy a airplane ticket and want to select 2 adults or 2 children, the draw down select, does not work in any websides,? WHY?. 2) Have FF any problems with SKYPE
== This happened ==
Not sure how often
== After innstalling windows 7

As a suggestion I'd put the Text_io segments into their own begin - exception - end sub-blocks within the main code. This way if Text_io does raise an exception you can catch it earlier as it may be able to recover - That is if it is a text_io exception.
Other than that you;ll have to step through in Debug.

Selection in the Generic Data Source does not work

Hi gurus,
I have some problem with the selection in the Generic Data Source.
I have created a view as a base of a Generic Data Source.
This view is based on several table; i.e.: VBUK-VBELN (Sales Order number), VBAP-ERDAT (creation date of Sales Order), VBAP-POSNR (Sales order item), VBAK-BSTNK (Customer Purchase order number).
In the view, some join conditions have been defined: VBUK-VBELN = VBAK-VBELN, VBUK-VBLN = VBAP-VBELN.
I want to extract the Sales Order number, Sales order item and Customer Purchase order number for the Sales order created on the previous year.
On the Generic Data Source, I select VBELN (Sales order number) and ERDAT (creation date of sales order) as selection.
However, when I run the extractor checker (RSA3) on this Generic Data Source, the selection does not work at all, i.e.:
eventhough I restricted the Sales order number and/or the creation date of sales order, the generic data source ignores the selection criteria and extract ALL data.
Does anyone ever have similar problem? Did I miss some step in the Generic DAta Source creation? How to fix this problem?
Thanks a lot in advance.
Best regards,
Fen

Hi Fen,
Just check what is the output you get for the same selection for the view you created.
Bye
Dinesh

OBIEE 11.1.1.6.5 - selection steps on a calculation does not work correctly

Similar Messages

Maybe you are looking for