OBIEE 11.1.1.6 Help needed to resolve a user requirement for an analysis

Hi all,
I need to create a pivot table like this:
Show a calculated measure VALUE / QUANTITY by dimension1 (on rows) and year & month (on columns). Add a grand total on year. Add a calculated item that shows the difference between grand total on year and last month shown. That is:
----------2012-------------------------------------------------------------+
----------JANUARY---FEBRUARY--MARCH-----APRIL-----Total 2012+Diff------+
+ (dim1) + 205+ 212+ 209+ 211+ 210+ 1+
Obviously it's easy to do if I don't take the additional calculated item into account.
But when it comes for having it specified, I'm in trouble:
I can put year and month on columns and create a total on year (and it works) but I don't know how to create the diff calculated item...
or...
I can create two calculated items, one for the grand total (but I don't exactly know how to define the rule), the other one defined as LAST month - grand total (but I get an error if I try to use a calculated item in a calculated item).
Any help or suggestion is welcome.
Version is 11.1.1.6.
Thanks!
Cristina

Must be the "hang at exit" problem.<br /><br />
#Stop the Firefox process:
#*[http://kb.mozillazine.org/Kill_application Mozillazine - Kill application]
#*Windows 7 users click [http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576 here]
#*Mac users: http://techheavy.com/2011/02/the-mac-task-manager/
#Why Firefox may hang:
#*[http://support.mozilla.com/en-US/kb/Firefox+hangs Firefox hangs] (see Hang at exit)
#*[http://kb.mozillazine.org/Firefox_hangs Firefox hangs (Mozillazine)] (see Hang at exit and Closing Firefox properly)
#*[https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding Firefox is already running but is not responding]
#Use Firefox Safe Mode to find a problem with an Extension or Plugin:
#*Don't check anything when entering Safe Mode, just continue
#*If the problem does not occur in Safe Mode it is probably and Extension or Plugin causing the problem
#*See:
#**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
#**[http://support.mozilla.com/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Similar Messages

  • Help needed to resolve there is no attribute X errors..

    On my website http://www.dorffdesign.nl/ there is a problem. Ive put the FB Like button there and it worked fine for a while. But now its gone. So ive run
    http://validator.w3.org/ on it and came up with the next errors:
    ========================================================================================== ==============================================
      Line 232, Column 32: there is no attribute "data-href" <div class="fb-like" data-href="http://www.dorffdesign.nl/" data-send="true" da… ✉  
      Line 232, Column 71: there is no attribute "data-send" …http://www.dorffdesign.nl/" data-send="true" data-width="450" data-show-faces=… ✉  
      Line 232, Column 89: there is no attribute "data-width" …orffdesign.nl/" data-send="true" data-width="450" data-show-faces="true"></div> ✉  
      Line 232, Column 111: there is no attribute "data-show-faces" …orffdesign.nl/" data-send="true" data-width="450" data-show-faces="true"></div>
    ========================================================================================== ===============================================
    In dreamweaver ive use this code for the FB likke button:
    <div id="fb-root"></div>
    <script>(function(d, s, id) {
      var js, fjs = d.getElementsByTagName(s)[0];
      if (d.getElementById(id)) return;
      js = d.createElement(s); js.id = id;
      js.src = "//connect.facebook.net/nl_NL/all.js#xfbml=1";
      fjs.parentNode.insertBefore(js, fjs);
    }(document, 'script', 'facebook-jssdk'));</script>
    ========================================================================================== ===========
    <div class="fb-like" data-href="http://www.dorffdesign.nl/" data-send="true" data-width="450" data-show-faces="true"></div>
    I really want to solve this so im hoping if you can point me into the right direction.
    Regards

    Hi ive bin able to put the fb like button on my page. But i totally forgot how i have to place the fb like button under the black box named portfolio.
    I hope you can tell me.
    Regards
    Date: Wed, 7 Nov 2012 07:41:54 -0700
    From: [email protected]
    To: [email protected]
    Subject: Help needed to resolve there is no attribute X errors..
        Re: Help needed to resolve there is no attribute X errors..
        created by MurraySummers in Dreamweaver General - View the full discussion
    You can either ignore those errors (since they have no impact on your page's functionality) or you can use DW to convert your page to an HTML5 doctype (File > Convert > HTML 5, and then the errors will go away.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4829606#4829606
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4829606#4829606
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4829606#4829606. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Dreamweaver General by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Need User Manual for Bex Analyser BI 7

    Hi All
    We have to prepare the user manual for Bex Analyser to show all the functions. If anyone has any link kindly let me know.
    Thanks for your help
    Regards
    Sathya

    HI ,
    See this link
    http://help.sap.com/saphelp_nw70/helpdata/EN/ba/45583ca544eb51e10000000a114084/content.htm

  • Help needed to resolve-First component in name com.adobe.output.config.OutputConfigHome not found

    Have installed Live Cycle ES2.5 SP2 Server (WebSphere) Trial version with Oracle DB.
    I want to generate PDF by merging data xml with XDP template. Hence I am trying to remotely invoke Livecycle Output Service (web service) for creating the PDF document using the Java API (as per API Quick Start Code Examples).
    But I am getting following exception-
    com.adobe.livecycle.output.exception.OutputException: 
    Context: WINADV93Cell01/clusters/cluster2, name: com.adobe.output.config.OutputConfigHome: First component in
    name com.adobe.output.config.OutputConfigHome not found. in javax.naming.NameNotFoundException, cause: IDL:omg.org/CosNaming/NamingContext/NotFound:
    1.0 in org.omg.CosNaming.NamingContextPackage.NotFound
    at com.adobe.printSubmitter.util.ResultFile.<init>(ResultFile.java:65)
    at com.adobe.printSubmitter.PrintServer.submit(PrintServer.java:229)
    at com.adobe.printSubmitter.service.OutputServiceImpl.generateOutputInTxn(OutputServiceImpl. java:262)
    at com.adobe.printSubmitter.service.OutputServiceImpl.generatePDFOutputInTxn(OutputServiceIm pl.java:395)
    at com.adobe.printSubmitter.service.OutputServiceImpl.access$100(OutputServiceImpl.java:82)
    at com.adobe.printSubmitter.service.OutputServiceImpl$2.doInTransaction(OutputServiceImpl.ja va:346)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doRequiresNew (EjbTransactionBMTAdapterBean.java:218)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EJSLocalStatelessEjbTransactionBMTAdapter_ 3af08fdf.doRequiresNew(Unknown Source)
    at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:133)
    at com.adobe.idp.dsc.transaction.impl.DefaultTransactionTemplate.execute(DefaultTransactionT emplate.java:79)
    at com.adobe.printSubmitter.service.OutputServiceImpl.invokeGeneratePDFOutputWithSMT(OutputS erviceImpl.java:341)
    at com.adobe.printSubmitter.service.OutputServiceImpl.generatePDFOutput(OutputServiceImpl.ja va:304)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:45)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
    Kindly help me to resolve this error? 

    Form Server has nothing to do with Reader Extensions (you must be running an orchestration that uses a Forms Call then a RE call). Lets validate that each component is installed correctly. Can you open the Reader Extensions UI and apply rights to a file?
    Use this URL to get to the UI:
    http://servername:portNUmber/ReaderExtensions
    Note that you will need the rights to log in .....use administrator for now.
    Paul

  • HELP NEEDED:  What is the phone number for Tech Support?

    I cannot find the Tech Support number for QuickTime support. I have been trying to resolve my QuickTime issue for three days and really need phone assistance. The self-reporting Tech Support online form requires a serial number for the product, but QuickTime does not come with a serial number.
    In reference to my post:
    QuickTime 7 Pro not working
    Posted: Mar 20, 2010 7:03 AM
    Click to reply to this topic Reply email Email
    When I click on the link to launch QuickTime Pro, it does not launch the program. A small box appears at the bottom of the screen with the QuickTime logo "Apple QuickTime", but when I hover the mouse over the icon, it contains a blank blue screen. If I click on it, nothing happens.
    Any suggestions?
    ~Annette
    Windows Vista

    I just bought this quicktime pro ( junk ) I can't believe there is no support for it other than these forums. tried several numbers and you end up with some poor boob in INDIA who doesn't know anything about it or they ask for a serial number that you can't give and don't have. WOW what a disapointment this products lack of support turned out to be, wish I didn't buy it.
    Anyway loaded it and it plays, but when I try to download the video to my computer the drop box on the right corner does not drop down. what am I missing here.?

  • Help needed in developing web map service for mobile devices

    please can any one help me(with source code if possible) for developing the web map service client for mobile devices in J2ME.

    There are a couple of ways you could do this. Bluetooth communication is available on a few J2ME devices, so you could do it through that. Or you could set up a servlet on the J2SE app end and send the data over the internet (check out HttpConnection). I'm not sure of any other quick and easy methods.

  • Help needed in resolving warnings while migrating to flash 4.6

    Getting the below error in FlashBuilder 4.6:
    1067: Implicit coersion of a value of type mx.controls:Tree to an unrelated type mx.controls:Tree
    The line of code is below which is there in QueryTreeAs.as:
    ModelLocator.getInstance().queryTree=queryTree;
    where queryTree is a component in a different mxml file - QueryTree.mxml. Like the below one:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Canvas xmlns:mx="http://www.adobe.com/2006/mxml"
        width="100%"
        height="100%"
        name="query"
        creationComplete="init()">
      <!--<mx:Style source="/assets/styles.css" />-->
      <mx:Script>
      <![CDATA[
      include "QueryTreeAs.as"
      ]]>
      </mx:Script>
      <mx:Tree y="0"
      id="queryTree"
      width="100%"
      height="100%"
      showDataTips="true"
      dataTipFunction="getDataTipLabel"
      labelFunction="tree_labelFunc"
      showRoot="true"/>
    </mx:Canvas>
    Any pointers to resolve this issue would be helpful!

    hey folks
    I have found out that every time the PDF file is downloaded, in the firefox download manager, that opens up to show the status of the downloaded PDF, when I click on the "Remove" button once I open the much needed PDF, the PDF is not carried onto the next upload for some reason... but I still need to investigate in Netscape and see how it works..
    thanks guys
    I will come back to update you once I test it in netscape navigator
    hepzi

  • Help Needed in resolving problems with Hyperion Planning Web Forms

    Hi,Can anyone help me with this problem?Problem:We are running Planning 2.3.1 I have created Webform & security(application owner has the ownership).Somehow Iam getting only 7 dimensions into webform & 1 dimension is missing in that. But whereas 8 dimensions are there in Essbase.Hsp_Rates dimension is available in essbase outline but Iam unable to see that dimension in the webform selection.And using the webform Iam unable to load any data ...the form is graded/protected.Is this happening because i dont have the requirement of 1 member from each Dimension?Please someone let me know why this is happening what might be the reason.ThanksUser

    Hi,The dimension Hsp_Rates is a hide dimension used by Planning to store the exchange rates for the differentes exchanges.All the standard information is stored on HSP_InputValue member (in this dimension).When you create a web form, Planning automatically asign this member (but don't show it).Probably you can't load data because you are selected on Version dimension a Standard Botton Up version, and you only can load data on level 0 members in this type of version.If you want to load data on upper level members, then you need to create a Standard Target version (in the Version dimension) and select it in the form.Please, advice if this solve your problemClaudioBPD Solutions

  • Help needed to create drop down list for a field.

    Hi,
    I have to create a parameter/select-options on the selection screen having  drop down values and also having multiple selections allowed.
    Please help me to attain this functionality.Its urgent.
    Thanks,
    Sandeep.

    Hi,
    Here is the exampel Program, i am sending the code for a Paramter, If you want this for the Select-options, then you need to have the paramer name as PS_PARM-LOW and you need to write the smae logic again for PS_PARM-HIGH to get the List box for the select-option
    REPORT ZLIST.
    TYPE-POOLS: VRM.
    DATA: NAME  TYPE VRM_ID,
          LIST  TYPE VRM_VALUES,
          VALUE LIKE LINE OF LIST.
    PARAMETERS: PS_PARM(10) AS LISTBOX VISIBLE LENGTH 10.
    AT SELECTION-SCREEN OUTPUT.
    NAME = 'PS_PARM'.
    VALUE-KEY = '1'.
    VALUE-TEXT = 'LINE 1'.
    APPEND VALUE TO LIST. VALUE-KEY = '2'.
    VALUE-TEXT = 'LINE 2'.
    APPEND VALUE TO LIST.
    CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
    START-OF-SELECTION.
    WRITE: / 'PARAMETER:', PS_PARM.

  • Help needed on balance sheet plan report for the current year

    Hi BW gurus,
    I have a problem with reporting.
    I need to get  Balance-Sheet Plan Reports for the Planned year and for the current year.
    To get the report for the planned year its  straight forward just by restricting 0balance by the version to 1 and the valuetype 20.
    But I have a problem with the current year report.
    I have fiscal year and the company code as the variables.
    The report should be like this.
    If we need the report as of today(July 26 2006),we may input 2006 for the fiscal year variable.
    And the 0balance for the twelve fiscal periods should be as follows
    From jan 2006 to june 2006(fiscal periods) it should have only the actuals
    From july 2006 to dec 2006(fiscal periods) it should have  only  the plan
    I have already built a query by having two restricted keyfigures on 0balance.
    One by restricting version and valuetype 0 and 10 , and the other with 1 and 20.
    But in the report I am getting two columns of data for each fiscal period for 12 periods.0balance with actuals and 0balance with plan.
    But I need to get 0balance with actuals from jan to june(individually for each fiscal period columnwise),and 0balance with plan from july to dec(individually for each fiscal period columnwise).
    Hope you people can visualize my report.
    Please help me ASAP.
    Any kind of help is appreciated.
    My mail id is [email protected]
    Thanks in advance
    Regards
    Sam Mathew

    Hi Sam,
        Did u get this issue solved. I am having the same issue now. Can u please let me know if u have a solution for this.
    Thanks
    Prasad

  • Help needed re i pod touch purchase for 10 year old

    This is going to sound like a stupid question, but I need your help. I am purchasing an ipod touch for my 10 year old godson. Is the 8GB adequate for a 10 year old? I know the specs say it holds up to 1750 songs and up to 10,000 photos, but how many games does it hold? I assume that if you have more photos and songs, you have less capacity for games and videos. The 16GB is more expensive, so I'm leaning toward the 8GB, unless that memory just isn't sufficient. I know that he will want to download a lot of games. Any help you could provide to this neophyte would be GREATLY appreciated. Thanks.

    Hi there -
    I think there's one more thing to consider. As the parent of 4 (the youngest is 10), I'm very mindful of my children's access to the Web...which is possible with a Touch. While the idea of having games is the driving force right now, I can guarantee you that your godson (or his friends) will be able to figure out the ways to access the web with his Touch. I've watched these conversations go on with kids as young as 7 years old.
    The suggestion about talking with his parents is a good one. I know I would not be pleased to find one of my kids having electronic paraphernalia that I hadn't given the okay to. One of our kids said, "But EVERYbody has one!" My response? "When your name is Everybody then you can have one too. You can't legally change your name until you're 18, so you'll just have to suffer under your parents' unfair rules." A lot of grumbling after that, but parenting isn't a popularity contest.
    So, check with the parents, make sure that having web access is okay with them, and know what his history is with small games, electronic gadgets, and such. THen buy what you can afford, no necessarily what he wants. He'll live, I promise you! <g>

  • Help needed from Nokia 8800 users??

    Which bluetooth adaptors/dongle are nokia 8800 users using? And also how much did they cost?
    I need one for mine but i'm not sure which is the right one to get. Any help would be much appreciated!! Cheers!!

    Do you mean bluetooth dongle for your PC ? I guess. My recommendation: buy a dongle that works with Microsoft Bluetooth software (assuming you have Windows XP with Service Pack 2, which has the Microsoft Bluetooth.
    then everything is easy: you stick the USB dongle in, windows installs the drivers for it, you download PC Suite and start using the 8800 over Bluetooth.

  • Help Needed - Remote Disk Access via MobileMe for AEBS

    OK, I've done a lot of reading in this forum, but didn't find a resolution to my problem.
    Here are my configuration:
    1) ADSL Router(2Wire 2700HGV-2) in bridged mode
    2) Airport Extreme Base Station (Simultaneous Dualband) with 7.4.1 firmware acting as the router using PPPOE
    3) External USB disk formatted using Mac OS format attached to AEBS
    Working:
    1) Within the LAN, can access the disk without any problem
    2) Over the WAN, Back to my Mac works fine for all my Mac computers
    Not Working:
    Over the WAN, I can see the AEBS in the shared section, however, upon clicking it, it always tells me that the connection failed after about 30 seconds, even when I try to use "connecting as".
    Anyone has tried this feature and it worked? Really appreciate if you can help as I am going to be on trip soon and I wish to access the disk from Internet when I am over there.
    Thank you!

    Hi rekeno
    Thanks for your post. I have the exact some problem. I'm sitting at work with my MacBook. At home there's my Airport Extreme and a Mac Pro.
    I can see both in my "Shared" section AND they also have different IPv6 tunnel addresses:
    [15:07 root@pm1] ping6 macpro.XXX.members.mac.com
    PING6(56=4088 bytes) fd22:3569:a8da:4c12:217:f2ff:fed4:6de0 --> fd44:bbdd:fce3:3be9:21d:4fff:fe4b:b80
    16 bytes from fd44:bbdd:fce3:3be9:21d:4fff:fe4b:b80, icmp_seq=0 hlim=64 time=54.748 ms
    Works.
    [15:14 root@pm1] ping6 airport.XXX.members.mac.com
    PING6(56=4088 bytes) fd22:3569:a8da:4c12:217:f2ff:fed4:6de0 --> fdfe:d7a4:759a:a360:21b:63ff:fef5:30a2
    ^C
    --- airport.XXX.members.mac.com ping6 statistics ---
    3 packets transmitted, 0 packets received, 100% packet loss
    This times out.
    Interestingly I can use Screen Sharing to my MacPro and do the same:
    [15:17 mau@macpro] ping6 airport.XXX.members.mac.com
    PING6(56=4088 bytes) fd44:bbdd:fce3:3be9:21d:4fff:fe4b:b80 --> fdfe:d7a4:759a:a360:21b:63ff:fef5:30a2
    16 bytes from fdfe:d7a4:759a:a360:21b:63ff:fef5:30a2, icmp_seq=2 hlim=64 time=0.721 ms
    This works AND it uses the SAME IPv6 address.
    I have also checked that my IPv6 tunnel configuration is allowed in the Airport Utility.
    Do you see the same behaviour? Can you run the same commands?
    Thanks a lot!
    Patrick

  • Help  needed in BAdi and user-exits

    Hi ,
       Can any one send me the procedure how to find out user-exits and about BAdi's.
    Thanks in advance
    Uday

    hi Uday,
    Welcome to <b>SDN</b>
    here is the sample program to find the user exits
    Finding the user-exits of a SAP transaction code
    Finding the user-exits of a SAP transaction code
    Enter the transaction code in which you are looking for the user-exit
    and it will list you the list of user-exits in the transaction code.
    Also a drill down is possible which will help you to branch to SMOD.
    Written by : SAP Basis, ABAP Programming and Other IMG Stuff
                 http://www.sap-img.com/*
    report zuserexit no standard page heading.
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
             tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
       select single * from tadir where pgmid = 'R3TR'
                        and object = 'PROG'
                        and obj_name = tstc-pgmna.
       move : tadir-devclass to v_devclass.
          if sy-subrc ne 0.
             select single * from trdir where name = tstc-pgmna.
             if trdir-subc eq 'F'.
                select single * from tfdir where pname = tstc-pgmna.
                select single * from enlfdir where funcname =
                tfdir-funcname.
                select single * from tadir where pgmid = 'R3TR'
                                   and object = 'FUGR'
                                   and obj_name eq enlfdir-area.
                move : tadir-devclass to v_devclass.
              endif.
           endif.
           select * from tadir into table jtab
                         where pgmid = 'R3TR'
                           and object = 'SMOD'
                           and devclass = v_devclass.
            select single * from tstct where sprsl eq sy-langu and
                                             tcode eq p_tcode.
            format color col_positive intensified off.
            write:/(19) 'Transaction Code - ',
                 20(20) p_tcode,
                 45(50) tstct-ttext.
                        skip.
            if not jtab[] is initial.
               write:/(95) sy-uline.
               format color col_heading intensified on.
               write:/1 sy-vline,
                      2 'Exit Name',
                     21 sy-vline ,
                     22 'Description',
                     95 sy-vline.
               write:/(95) sy-uline.
               loop at jtab.
                  select single * from modsapt
                         where sprsl = sy-langu and
                                name = jtab-obj_name.
                       format color col_normal intensified off.
                       write:/1 sy-vline,
                              2 jtab-obj_name hotspot on,
                             21 sy-vline ,
                             22 modsapt-modtext,
                             95 sy-vline.
               endloop.
               write:/(95) sy-uline.
               describe table jtab.
               skip.
               format color col_total intensified on.
               write:/ 'No of Exits:' , sy-tfill.
            else.
               format color col_negative intensified on.
               write:/(95) 'No User Exit exists'.
            endif.
          else.
              format color col_negative intensified on.
              write:/(95) 'Transaction Code Does Not Exist'.
          endif.
    at line-selection.
       get cursor field field1.
       check field1(4) eq 'JTAB'.
       set parameter id 'MON' field sy-lisel+1(10).
       call transaction 'SMOD' and skip first   screen.
    *---End of Program
    To find the function exit
    REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
    TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
    TABLES : TSTCT.
    DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
    DATA : FIELD1(30).
    DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
    PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
    SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
    IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
    AND OBJECT = 'PROG'
    AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC EQ 'F'.
    SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
    SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
    TFDIR-FUNCNAME.
    SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
    AND OBJECT = 'FUGR'
    AND OBJ_NAME EQ ENLFDIR-AREA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    ENDIF.
    ENDIF.
    SELECT * FROM TADIR INTO TABLE JTAB
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'SMOD'
    AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
    TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
    WRITE:/(95) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 'Exit Name',
    21 SY-VLINE ,
    22 'Description',
    95 SY-VLINE.
    WRITE:/(95) SY-ULINE.
    LOOP AT JTAB.
    SELECT SINGLE * FROM MODSAPT
    WHERE SPRSL = SY-LANGU AND
    NAME = JTAB-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    WRITE:/1 SY-VLINE,
    2 JTAB-OBJ_NAME HOTSPOT ON,
    21 SY-VLINE ,
    22 MODSAPT-MODTEXT,
    95 SY-VLINE.
    ENDLOOP.
    WRITE:/(95) SY-ULINE.
    DESCRIBE TABLE JTAB.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , SY-TFILL.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
    AT LINE-SELECTION.
    GET CURSOR FIELD FIELD1.
    CHECK FIELD1(4) EQ 'JTAB'.
    SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    or
    1. in se11, goto table MODSAP
    View table contents
    2. in Type field, enter 'E' (for function exit)
    3. For that tcode, u should know the program name.
    eg. SAPLLMOB
    4. then type SAPLLMOB and execute
    or
    REPORT z34331_user_exit .
    TABLES : tstc, "SAP Transaction Codes
    tadir, "Directory of Repository Objects
    modsapt, "SAP Enhancements - Short Texts
    modact, "Modifications
    trdir, "System table TRDIR
    tfdir, "Function Module
    enlfdir, "Additional Attributes for Function Modules
    tstct. "Transaction Code Texts
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
    SELECTION-SCREEN SKIP.
    PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN END OF BLOCK a01.
    START-OF-SELECTION.
    Validate Transaction Code
    SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
    Find Repository Objects for transaction code
    IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'PROG'
    AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
    SELECT SINGLE * FROM trdir
    WHERE name = tstc-pgmna.
    IF trdir-subc EQ 'F'.
    SELECT SINGLE * FROM tfdir
    WHERE pname = tstc-pgmna.
    SELECT SINGLE * FROM enlfdir
    WHERE funcname = tfdir-funcname.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'FUGR'
    AND obj_name = enlfdir-area.
    MOVE : tadir-devclass TO v_devclass.
    ENDIF.
    ENDIF.
    Find SAP Modifactions
    SELECT * FROM tadir
    INTO TABLE jtab
    WHERE pgmid = 'R3TR'
    AND object = 'SMOD'
    AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
    WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
    WRITE:/(95) sy-uline.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    WRITE:/(95) sy-uline.
    LOOP AT jtab.
    SELECT SINGLE * FROM modsapt
    WHERE sprsl = sy-langu AND
    name = jtab-obj_name.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    WRITE:/1 sy-vline,
    2 jtab-obj_name HOTSPOT ON,
    21 sy-vline ,
    22 modsapt-modtext,
    95 sy-vline.
    ENDLOOP.
    WRITE:/(95) sy-uline.
    DESCRIBE TABLE jtab.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
    Take the user to SMOD for the Exit that was selected.
    AT LINE-SELECTION.
    GET CURSOR FIELD field1.
    CHECK field1(4) EQ 'JTAB'.
    SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    if u find it useful plz markt the points
    Regards,
    Naveen

  • Help needed in creating a batch job for delivery

    Hi gurus
    Can somebody tell me the process of creating a batch job ..for creation of delivery.. is this the same process to create the batch jobs for invoices also?
    thankyou
    bj

    hello jaya ,gsl
    thankyou very much for ur help .. I have tried creating a variant .. in vl10batch.. and ive assigned it a scheduled time .. i craeted a open order..  and when the scheduled time has arrived and is over,i went to the order and still i dont see any delivery doc created .. and in sm37 its shows that the job is finished ..i even tried sm36 .. of creating a job for the variant.that ive craeted in vl10batch .and then assigning the job in sm37.. i can see the job that ive created in sm37 it is changing its status from released to finished .. as per the scheduled time but the delivery is not created .. i tried vf06 for a billing   variant.. and went to sm36 craeted a job for the variant..using the program name.. and next to sm37 i can  see the created  job in the spool also..but somehow it is  not creating the billing doc also..
    can u help me to find where it actually went wrong with me ?
    thanksalot in advance..

Maybe you are looking for