OBIEE 11g-- Graph Data Display

Hi All,
I have been facing a big problem in making the report.
I need to display month wise bar chart (Sales Value), On top of the Bar i have to display the Amount in terms of Millions, I have achieved by using Custom Number format, but It is difficult for developing the reports since i have to give each and every time this condition.
My report is connected to Essbase ASO Cube,columns are
Region and Sales Amount.
So i have decided to call DB function which is common wherever I need amount in Millions just need to call but it is failed.
Is it possible ? or Is there any other to achieve the same.
Thanks in advance.

Hi,
Essbase ASO is different than a relational database so PL/SQL commands are not going to function with this.
You are likely going to have to change the number format on each report.

Similar Messages

OBIEE 11g - Download All/Display All of rows in Answers

Hi All,
I have created a request in OBIEE 11g and now displaying it on dashboard.
by default shows 25 rows, can extend it fo 500 rows, next i should keep on clicking to see full data.
Also download of data is possible for the rows available on page only i.e. 500 rows are only getting exported to excel.
Any way to view all data on dashboard at once and download as well?
Please help, thanks.
Regards,
srl

Hi ,
To implement the solution, please do:
1. Change instanceconfig.xml file in <biee11g_install>\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1 as following
<Views>
<Pivot>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>2500</DefaultRowsDisplayedInDownload>

<DisableAutoPreview>false</DisableAutoPreview>
<MaxVisibleColumns>5000</MaxVisibleColumns>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
</Pivot>
<Table>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>2500</DefaultRowsDisplayedInDownload>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
</Table>
</Views>
3. Note the new elements added are the following to both <Pivot> and <Table>, the Pivot part controls Pivot view, and Table part controls Table View, my testing was done with Table View.
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
4. Restart Presentation Server from EM, then run your request, do excel export to verify.
Thanks...

VARBINARY problems in OBIEE 11g importing data from DB2 AS/400 V6R1

Hi all,
I have set up a connection between OBIEE 11g version 11.1.1.6.0 and DB2 AS/400 V6R1.
It is working fine for most of the data types, but we have the following cast sentence in a view:
CAST(
CASE WHEN A.RCATLY IN ( 1250 , 1000 ) THEN F.DESCRIPTION3 ELSE
CASE WHEN A.RCATLY=12 THEN 'AUM' ELSE
CASE WHEN F.KEYASL3='AL_EXCLUDED' THEN 'Other open items' ELSE
'AUM' END END END AS CHAR(50)) AS POS_CAT,
CAST(CASE WHEN F.DESCRIPTION3 IS NULL THEN 'Securities' ELSE F.DESCRIPTION3
END AS CHAR(50)) AS POS_DESCR
We are importing this view into OBIEE 11.1.1.6, the fileds POS_CAT and POS_DESCR are coming as BINARY, we also have tried to cast them to VARCHAR, they come as VARBINARY instead.
When we try to see the fields in a report we are getting the error below:
Error Codes: OAMP2OPY:Q4NU7XSN
Invalid Handle Of 'const saw::ExpressionBase*' Exception
I have tried to cast this fileds to VARCHAR in administration, no luck, error below:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 46035] Datatype(VARBINARY) nullable(1) unicode(1) external char(0) conversion to datatype(VARCHAR) nullable(1) unicode(0) external char(0) is not supported. (HY000)
SQL Issued: SELECT 0 s_0, "MI"."DWSPAIN01"."POS_CAT" s_1 FROM "MI" FETCH FIRST 65001 ROWS ONLY
Any suggestion?
Edited by: Ruben Alonso Ortega on 04-Mar-2013 07:23

Thanks for your quick response, I have tried to change it in the phisycal layer, to CHAR, VARCHAR, same error, it didn't work.

Obiee 11g graph how to increase bar width

Hello,
obiee 11g: -> bar graph: how to increase bar width ?
Thank you,
Ark

Hi ,
Create your own bar code type rather than using system Bar Codes , if the length of your code doesn't fit with the standards available under SE73 . There you can define your own sizes as per your requirement , If you have a stands logic ,for example production order type Z001 should be in 15 lengthy code , then put a condition in the smart form to facilitate it , like wise you could use different lengthy bar codes in single form .
I hope this is what you meant by your treat.
Good Luck .
Cheers ,
Dilum

OBIEE 11g - How to display Grand Total in graphs

hi ,
I am using obiee 11.1.1.6 version . In a report I have a requirement to display the grand total (present in the table) to be shown in the graph also . Kindly help.
Regards,
Niv

Hi Niv,
One quick question here.How are you creating Grand Total?
I have created using grand total by row summing and inserting that value in the Group By Function.
Attached the screen shot for your reference.
GT - Download - 4shared
Mark if helps
Thanks,

Changing Axis data values in OBIEE 11g Graph

Hi ,
I have a graph with three dimensions and a single measure . So , on x axis I am getting the values with two dimensions like
Customer1 2013
Customer1 2012
Customer1 2011
I want to change it to Customer1 only . Can anybody suggest how can we change this.

Why don't you just remove the Year dimension from the "Group By (Horizontal Axis)" section?

OBIEE 11g Graph records limitation

Hi Gurus,
I am new to 11g OBIEE. I would like to know what is the maximum records allowed to have a graph and the default. if i want to increase the value from default how i can do that.
As we have some graph reprot in 10g which is not working in 11g. giving error as
Error
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. Please have your System Administrator look at the log for more details on this error.
Regards
@li
Edited by: @l**** on Oct 16, 2012 11:29 AM

Hi,
Your message was truncated, please can you edit it and include the error message?
Also, what chart type are you using? Is the chart based on the criteria directly or a pivot table? How many records are returned by your query?
Thanks,
Andy.

OBIEE 11g: Report not displaying maximum rows per page

I have an OBIEE report that is not displaying the maximum rows per page. When I click on the UP/DOWN arrow at the bottom of the report there is no change.

Hi,
Refer the below link.
http://satyaobieesolutions.blogspot.in/2012/08/limit-row-in-table-and-graph-in-initial.html
OR,
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=1198961.1
Add the following to your instanceconfig and then restart the presentation service.
file path
D:\Oracle\Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfig.xml just add below lines
<Views>
<Pivot>
<MaxCells>6500000</MaxCells>
<MaxVisibleColumns>100</MaxVisibleColumns>
<MaxVisiblePages>100</MaxVisiblePages>
<MaxVisibleRows>65000</MaxVisibleRows>
<MaxVisibleSections>25</MaxVisibleSections>
<DefaultRowsDisplayed>500</DefaultRowsDisplayed>
<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>
<DefaultRowsDisplayedInDownload>65000</DefaultRowsDisplayedInDownload>
<DisableAutoPreview>false</DisableAutoPreview>
</Pivot>
<Table>
<MaxCells>6500000</MaxCells>
<MaxVisiblePages>100</MaxVisiblePages>
<MaxVisibleRows>65000</MaxVisibleRows>
<MaxVisibleSections>25</MaxVisibleSections>
<DefaultRowsDisplayed>500</DefaultRowsDisplayed>
<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>
<DefaultRowsDisplayedInDownload>65000</DefaultRowsDisplayedInDownload>
</Table>
</Views>
Hope this help's
Thanks,
Satya

OBIEE 11g .0d date issue

Hi,
I create an initialization block to populate a couple of repository variables.
After saving the RDP the value for the default initializer changes from 2011 to 2011.0d
I have been using several workaround. But I need some permanent fix in rpd itself. Can anyone point to some Oracle Document? Is this issue been resolved in latest release of OBIEE. I am using 11.1.1.6.6.
Workaround Ref : The .0d date issue
Re: OBIEE 11.1.1.6.2 BP1 Repository Variable data type

Have you gone through my suggestions at the below links?
The .0d date issue
Re: OBIEE 11.1.1.6.2 BP1 Repository Variable data type
You have to do it where ever you are using that rep. variable not in the init block.

OBIEE 11g - Combine data from two Oracle tables

Good day!
I tried to combine data from two Oracle tables as fact data, but it doesn't work.
My steps: I created SCOTT.EMP2 table from SCOTT.EMP table, update EMPNO and ENAME values of EMP2 table to distinguish data of my tables. Then I imported physical tables DEPT, EMP and EMP2 to BIEE 11g, created joins DEPT-EMP and DEPT-EMP2 in physical diagram. Then I dragged DEPT and EMP tables to BMM, and EMP2 table to EMP as second LTS. In Content tab for EMP and EMP2 I checked "This source should be combined with other sources at this level" checkboxes. Then I renamed logical tables EMP and DEPT to Employees and Departments and dragged them to Presentation area. In Answers I created Analysis with columns DNAME and ENAME.
The problem is that data on results tab is only from one physical table EMP or EMP2 (depending on the order of sources EMP and EMP2 of LT Employees) and not from both.
Can anybody help? Am I missed something?
Al.

Hi Al,
I think you have to define the content of the LTS.
http://download.oracle.com/docs/cd/E12096_01/books/admintool/admintool_BusModSetup16.html
You have to specify the content of the different fragments.
http://download.oracle.com/docs/cd/E12096_01/books/admintool/admintool_SetUpAggNav3.html#wp1005333
Maybe you have to add an additional column 'Source' ('EMP1', 'EMP2')
Good Luck,
Daan Bakboord
http://obibb.wordpress.com

Report Links in OBIEE 11g Dashboard not displayed correctly

In the Dashboard pages the Report Links for Export are not displayed correctly .
Instead of showing the multiple options for export/download it shows just text.

It can be done by doing below steps.
1) before doing this take a backup of instanconfig.xml file and do the below changes...
You can configure various options that change the way that right-click interactions are handled in views for an analysis at runtime. The elements in the instanceconfig.xml file specify the default settings for a new or upgraded analysis. You can edit the properties of an analysis in Presentation Services to modify how the analysis handles right-click interactions in views.
Before you begin this procedure, ensure that you are familiar with the information in Section 3.4, "Using a Text Editor to Update Configuration Settings."
To manually configure for interactions in views:
2) C:\Oracle\Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfig.xml
Open the instanceconfig.xml file for editing,
3)
Locate the sections in which you must add the elements
Include the elements and their ancestor elements as appropriate, as shown in the following example:
<ServerInstance>
<Analysis>
<InteractionProperties>
<InteractionPropertyAddRemoveValues>false</InteractionPropertyAddRemoveValues>
<InteractionPropertyCalcItemOperations>false</InteractionPropertyCalcItemOperations>
<InteractionPropertyDrill>false</InteractionPropertyDrill>
<InteractionPropertyGroupOperations>false</InteractionPropertyGroupOperations>
<InteractionPropertyInclExclColumns>false</InteractionPropertyInclExclColumns>
<InteractionPropertyMoveColumns>false</InteractionPropertyMoveColumns>
<InteractionPropertyRunningSum>false</InteractionPropertyRunningSum>
<InteractionPropertyShowHideSubTotal>false</InteractionPropertyShowHideSubTotal>
<InteractionPropertySortColumns>false</InteractionPropertySortColumns>
</InteractionProperties>
</Analysis>
</ServerInstance>
4) Save your changes and close the file.
5)
Restart Oracle Business Intelligence.
Mark as correct if it is helpful :)
Thanks.

Display values in legend obiee 11g

Dear All,
Is there a way to display values in legend for obiee 11g graph? I could not find that features. It only has show or do not show the legend.
Thanks,
Sushil

is it not something like
select columnA from SubjectAreat where
columnA is not like '%A%'
and columnA is not like '%B%'

OBIEE 11g Map question

Hi all,
We are using OBIEE 11g Mapviewer to display some results. We have point as well as polygon location geometries which combined with other dimensions display scores on the map.
It seems there is a restriction on the display graphics that can be used based on a geometry type. It is something like the following table:
Geometry Type - Graphic Format
Polygon - Color Fill, Bubble, Pie Graph, and Bar Graph
Point - Bubble, Variable Shape, Image, and Custom Point
We display a pie graph of scores on a given polygon and would like to keep it standard irrespective of the underlying geometry.
I was wondering if its possible to force use a Pie Graph on Point geometry?
Please let us know if there is a way to solve this. Really appreciate your time.
Thanks!

Hi
Your best bet is to follow the Security Guide:
http://docs.oracle.com/cd/E20490_01/bia.7963/e19042.pdf
Really you just need to make sure the Responsibility names are the same as the Application Roles. So either you create new responsibilities in EBS to match the existing (seeded) roles or you create new roles in OBI Apps to match your existing responsibilites. Both ways round are valid and it all depends on your security solution.
Thanks
Robin

Text Box in Obiee 11g

Hi All,
How will I plot a text box in OBIEE 11g graphs.
Please help me.
SwathiP

Hi SwathiP,
I think that is not possible in obiee 11g, since obi renders graph as a flash object..
You can't create a text box over flash object unless the text box is created in the flash.
thanks,
Jprakash

OBIEE 11g Launch

Friends..FYI. OBIEE 11g Launch date announced.
http://www.oracle.com/webapps/events/EventsDetail.jsp?p_eventId=113706
Edited by: user8876026 on Jun 9, 2010 12:51 PM

thanks but we got the scoop already from rnm1978
OBIEE 11g launch date announced

OBIEE 11g-- Graph Data Display

Similar Messages

Maybe you are looking for