OBIEE 11g - How to display Grand Total in graphs

hi ,
I am using obiee 11.1.1.6 version . In a report I have a requirement to display the grand total (present in the table) to be shown in the graph also . Kindly help.
Regards,
Niv

Hi Niv,
One quick question here.How are you creating Grand Total?
I have created using grand total by row summing and inserting that value in the Group By Function.
Attached the screen shot for your reference.
GT - Download - 4shared
Mark if helps
Thanks,

Similar Messages

How to display grand total only on the last page of my report

Hello
I need to display the grand total amount of the invoice only on the last page of every report. If the report has 1 page then the grand total will be displayed on the 1st page. If the report has 2 pages then a subtotal will be displayed on the 1st page adding up all the amounts on page 1 only, and the grand total will be displayed on the 2nd page, adding up all the amounts of page 1 and 2. If the report has 3 pages then the a subtotal will be displayed on page 1 adding up all the amounts of page 1, and another subtotal on page 2 adding up all the amounts of page 2, and the grand total are displayed on page 3 adding up the amounts of every page.
supplier amount
xx 100
yy 100
subtotal 200
page 1 of 2 --here i need to display only the total amounts of page 1
supplier amount
subtotal brought forward 200 --then i need to bring total of page 1 over to page 2
qq 300
zz 300
total 800 --here i have reached the end of the report and
need to display the grand total
page 2 of 2
--Currently i am displaying this on my report
supplier amount
xx 100
yy 100
total 800 --this one gives the problem cause it displays the grand total
---------- on page 1 of 2 even before you can see the amounts on the
next pages
page 1 of 2
supplier amount
qq 300
zz 300
total 800

put the grand total in a frame and set it to print on the last page of the enclosing object.

How to get Grand Total Text in ALV GRID

Hi Folks,
I am able to get the SUBTOTAL TEXT .....But i need...
How to get Grand Total Text in ALV GRID Display...
Can any one give a Solution for this...

Hi Surendar,
Check out this code.. this is showing Total Text in Toal line in the very first column.
REPORT zsales_ord_det_1                        .
TABLES: ztable_10.
TYPE-POOLS: slis.
DATA: BEGIN OF it OCCURS 0,
srno(6) type c,
name LIKE ztable_10-name,
age LIKE ztable_10-age,
END OF it.
DATA : BEGIN OF it_temp OCCURS 0,
name LIKE ztable_10-name,
age LIKE ztable_10-age,
END OF it_temp.
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
      wa_fieldcat TYPE slis_fieldcat_alv.
DATA: v_repid LIKE sy-repid,
       i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
       gs_layout TYPE slis_layout_alv,
       gd_layout TYPE slis_layout_alv,
       i_sort TYPE STANDARD TABLE OF slis_sortinfo_alv,
       wa_sort TYPE slis_sortinfo_alv.
START-OF-SELECTION.
v_repid = sy-repid.
SELECT * FROM ztable_10 INTO TABLE it_temp.
LOOP AT it_temp .
    it-srno = 'Total'.
    it-name = it_temp-name.
    it-age = it_temp-age.
    APPEND it.
ENDLOOP.
END-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
   EXPORTING
     i_program_name               = v_repid
     i_internal_tabname           = 'IT'
I_STRUCTURE_NAME             =
I_CLIENT_NEVER_DISPLAY       = 'X'
     i_inclname                   = v_repid
I_BYPASSING_BUFFER           =
I_BUFFER_ACTIVE              =
    CHANGING
      ct_fieldcat                  = i_fieldcat[]
   EXCEPTIONS
     inconsistent_interface       = 1
     program_error                = 2
     OTHERS                       = 3
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
wa_fieldcat-row_pos = 1.
wa_fieldcat-col_pos = 1.
wa_fieldcat-fieldname = 'SRNO'.
wa_fieldcat-tabname = it.
append wa_fieldcat to i_fieldcat.
LOOP AT i_fieldcat INTO wa_fieldcat.
    IF wa_fieldcat-fieldname = 'AGE'.
      wa_fieldcat-do_sum = 'X'.
      MODIFY i_fieldcat FROM wa_fieldcat.
    ENDIF.
   IF wa_fieldcat-fieldname = 'SRNO'.
     Hide this field so that it can display it's content i.e.
        Total text in Subtotal level
    wa_fieldcat-tech = 'X'.
      wa_fieldcat-no_out = 'X'.
      MODIFY i_fieldcat FROM wa_fieldcat TRANSPORTING tech no_out.
   ENDIF.
ENDLOOP.
wa_sort-spos = 1.
wa_sort-fieldname = 'SRNO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort.
gd_layout-no_totalline = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                       = ' '
     i_callback_program                        = v_repid
I_CALLBACK_PF_STATUS_SET     = ' '
i_callback_user_command                = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE         = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST    = ' '
I_STRUCTURE_NAME                       =
I_BACKGROUND_ID                        = ' '
I_GRID_TITLE                                  =
I_GRID_SETTINGS                          =
     is_layout                                      = gd_layout
     it_fieldcat                                      = i_fieldcat[]
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
     it_sort                           = i_sort
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
I_HTML_HEIGHT_TOP                 =
I_HTML_HEIGHT_END                 =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = it
   EXCEPTIONS
     program_error                     = 1
     OTHERS                            = 2
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
Regards,
Seema

In OBIEE 11G, how to get the special parameter created by JAVA?

Hi Experts,
In OBIEE 11G, how to get the special parameter created by JAVA?
For example:
In JAVA , it has set one parameter named 'test'.
So how to get the parameter in filter area in OBIEE?

Hi Kobe,
No P2 holds the parameter name like PresentationTable.ColumnName, in your form you may go for complete name or just column name and before submitting the form you can define the Action url.
I would suggest to read section 6.3.2.1.
ex:
<SCRIPT LANGUAGE="JavaScript">
changeAction(url) {
var TestVar = form.inputbox.value;
document.this_form.action="saw.dll?Go&Path=/Shared/Test/SB2&Action=Navigate&P0=1&P1=like&P2=Customers.Region&P3="+TestVar;
</SCRIPT>
</HEAD>
<BODY>
<FORM NAME="myform" ACTION="" METHOD="GET">Enter something in the box: <BR>
<INPUT TYPE="text" NAME="inputbox" VALUE=""><P>
<INPUT TYPE="button" NAME="button" Value="Click" onClick="changeAction(this.value)">
</FORM>
If helps pls mark.
Edited by: veeravalli on Oct 24, 2012 10:25 AM

OBIEE 11g - Download All/Display All of rows in Answers

Hi All,
I have created a request in OBIEE 11g and now displaying it on dashboard.
by default shows 25 rows, can extend it fo 500 rows, next i should keep on clicking to see full data.
Also download of data is possible for the rows available on page only i.e. 500 rows are only getting exported to excel.
Any way to view all data on dashboard at once and download as well?
Please help, thanks.
Regards,
srl

Hi ,
To implement the solution, please do:
1. Change instanceconfig.xml file in <biee11g_install>\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1 as following
<Views>
<Pivot>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>2500</DefaultRowsDisplayedInDownload>

<DisableAutoPreview>false</DisableAutoPreview>
<MaxVisibleColumns>5000</MaxVisibleColumns>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
</Pivot>
<Table>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>2500</DefaultRowsDisplayedInDownload>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
</Table>
</Views>
3. Note the new elements added are the following to both <Pivot> and <Table>, the Pivot part controls Pivot view, and Table part controls Table View, my testing was done with Table View.
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
4. Restart Presentation Server from EM, then run your request, do excel export to verify.
Thanks...

How to display the total at the end of the column in the report.

Hi all,
Could any one please intimate, how to display the total at the end of the column. For example, i have a column, "sales" as the Key figure, and it has the data for all the transactions. Now, i would like to display the total at the end of the report, below the same column.
Similarly, for all the other columns in the report, i need to display the total for all the columns in the report.
Thanks & Regards,
A.V.N.Rao

Hi All,
Thanks for many suggestions. I tried by providing the "Total" under "Calculate Results as" and also "Counter for all detailed values" under "Calcuate Single Values as", in the "Calculations" tab of the key figure, but i am unable to get the information. Again, i am providing the requirement below:
CHAR - A   CHAR - B   TIME CH. - 1 KF -1 KF- 2 KF - 3
1                     RAM        2012           1         50      50
2                     SAM         2012          2         100    200
Result                                               3           150   250
Assume KF -1 as "Qty." KF-2 as "Price" KF-3 as "Sales".
Please intimate the solution.
Thanks & Regards,
A.V.N.Rao.

OBIEE 11g How to Exclude/Include Multiple columns on BI Report at Run Time

OBIEE 11g How to Exclude/Include Multiple columns on BI Report at Run Time

Exclude:
you Can exclude columns in either Table view or pivot table view by placing those columns in Excluded section but you will notice that it will appear in bi server parsed sql query.
Not sure you were asking about runtime??
would you please explain your question!!
Thanks
NK
Edited by: DNK on May 8, 2013 9:48 PM

Obiee 11g How to let user change password

obiee 11g How to let user change password ？
i not mean use weblogic console。 normal user how to change password。

With 11g, OBIEE essentially uses the 10g notion of external authentication.
By default, this is done by the WLS (Weblogic) LDAP identity store, but it may be done by another supported Authenticator either within WLS, or in the OBIS meta data (i.e. Custom Authenticator or LDAP). As such, OBIEE no longer has any control over user passwords; this is why the steps referenced in note 1102353.1 do not apply to OBIEE 11g, but only to internal/repository-defined users in OBIEE 10g.
So, as with password maintenance in OBIEE 10g when an external authenticator is used, it is within that external authentication system that password is changed, not within OBIEE 11g. There is no option in OBIEE 11g to allow users to change passwords.
There are two work-arounds with which you can change your password:
1) From the Weblogic administration console/WLST.
You need to give such user access into Weblogic console or access to browse through involved MBean hierarchy and other modify permissions. Changing the password using WLST instance is covered here:
Ideally, the console and WLST approaches are used by Administration accounts to manage other users. But the console and WLST can be made to allow other users to change passwords (which will be more or less like carrying out an administrative task by users themselves)
2) Using a programmatic approach.
Here the application that intends to provide password change functionality to its users should implement this functionality on its own (GUI plus call to the relevant Weblogic API). Weblogic provides an MBean that the application can use to accomplish this. See here for more information.
An enhancement request exists for this functionality. This is unpublished bug 11836170 - enable non admin users to change passwords in obiee 11g.

Need to display grand total text in OOPS ABAP ALV report

Hi
I am using OOPS for alv display and need to display grand "total text" in any column in th eoutput display.
I know the procedure to display in ALV display. but dont have idea in OOPS. Please help.
Thanks
Amminesh.

hi,
follow this link for alv's with oop's oncept.
http://abapreports.blogspot.com/2008/06/alv-grid-display-with-oops.html
for calculating total to the specific field.....
while creating the fieldcatalog pass the value 'X' to field do_sum of lvc_t_fcat( field catalog).
data: fcat type lvc_t_fcat.
fcat-fieldname = <field-name>.
fcat-ref_table = <ref-tablename>.
fcat-ref_field = <ref-fieldname>.
fcat-do_sum = 'X'.
regards,
Ashok

OBIEE 11g - How to create clean looking pivot tables

Hi, does anyone have a good way to clean up the appearance of pivot tables in OBIEE 11g? I'm a big fan of Stephen Few and firmly believe in the "minimize non-data ink" theory. Unfortunately, there seems to be a lot of stuff on OBIEE pivots that I can't easily clean up. Does anyone have ideas for:
1. How to remove the "gray" / "beige" coloring from column and row dimension? I opened a ticket with Oracle 6 months ago, and basically they've just responded that it is a "enhancement request" for a future version (aka not going to see it for a LONG time)
2. For my "across" dimension, I don't seem to have a good way to show the dimension name. There is an option under "column properties" to "display heading" - but when this is turned on it scrunches the heading up directly over the column that has the down dimension members. I really want this to go across the pivot.
Any help on this would be greatly appreciated.
Thanks!
Scott

Hi,
Steps,
Just create DSN (odbc connection for the excel data source) then try to import via rpd that time u must need to select "System Tables"
For more steps,
http://allaboutobiee.blogspot.com/2012/03/excel-as-data-source-in-obiee.html
http://oraclebi.blog.com/working-with-excel-datasource-in-obiee
http://www.ascentt.com/2012/01/importing-excel-file-into-obiee-11g
http://obiee101.blogspot.com/2008/06/obiee-excel-import-prepping-data.html
Note: user id and password u can set it u r own and need to be updated in your connection pool alos else u can go with empty user id and password
Thanks
Deva

OBIEE 11g: How to send email from Analysis (via Action Framework)

Hi,
I have installed OBIEE 11g SampleAppLite in my POC box.
One of the features I want to have is to allow users to send their feedback (email) about a report to the report owner. Can this be done without launching Outlook? I tried to Invoke a Browser Script and found that I can display a form showing Recipient, Subject and Message text fields, but I do not know how to send the email.
Thanks!

Hi Devarasu,
Thanks for your reply. The link you gave is for sending iBots. But if I do this, users will not be able to send their feedback / comment.

How to get grand total in query designer

Hi,
Antbody know how to get the grand total after the last row in query designer? I
Thanks

Hi,
If we select the very first Characterstic in the rows section and set the Supress result rows as "never".
That will show the overall result in the end of the report,
In the query properties tab ,check for display properties of the result.That should be set to bottom.
Hope this will work.
Thanks
Mukesh

How to color Grand total column

Hi,
We got one requirement from our customer to show Grand Total column with RED color based on some condition.
Could you please let me know is it possible to make it color. we are using obiee 11.1.1.6.0
Thanks
Anirban

Hi,
Thanks for your reply,
According to the link Below
http://gerardnico.com/wiki/dat/obiee/answer_xml,
We can able to change color for Grand total through XML, but the example is in 10g, there is nothing call saw:totalValues in 11g Currently, may be it is replaced with saw:displayGrandTotal, I tried that option also but it is not working.
Is there anything which we can do through xml, to achieve the above requirement?
Thanks
Anirban

How to display pagewise total in Oracle reports?

Hi,
I want to display pagewise total in all pages as well as report total at the last page of the report.
I have tried Reset at : Page, Print on : All pages
But nothing is working.
Please suggest what else I need to set to achieve the requirement
Thanks in Advance
Sudeep

Create a user parameter for line count and another to hold the value of total at end of page,
create formula column in your query group, where the column to be summarised exists,
See how many lines of records/transaction can be printed on your page, count them in a formula column and when the printable record been retrived assign the total to
the user parameter you have created.
set the property 'PRINT OBJECT ON' to 'ALL BUT LAST PAGE'
put you summary item just below this field and set the property 'PRINT OBJECT ON' to 'LAST PAGE', the final total will be displayed on last page.

In OBIEE 11g How to Change Import Type Local Machine to Remote Machine

Hi All,
I Have Installed OBIEE 11g Client tools in my Machine and server is in Other Server.when i tried to Import metadata i am getting Connection Falied error.
When i tried to import metadata in import type option i can see only one option Local Machine that is also in Disable mode.
how to make import type option to Remote.
Thanks and Regards
Kiran Kumar

In BI EE 10g, there was no Oracle Client bundled along with BI EE. So, BI EE will use your Oracle DB Home client to connect to the database. So, when you try to connect to the database through the Repository or BI Server, it will try to find the tnsnames entry in the Oracle Client of BI EE 11g instead of your database. There are 2 options to work around this
Copy your tnsnames.ora and Paste it to
1. Drive:Oracle\Middleware\Oracle_BI1}network\admin
2 Drive:Oracle\Middleware\oracle_common\network\admin
TNS File like,
DBName =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Your Server IP)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DBName)
Thanks,
Balaa...

OBIEE 11g - How to display Grand Total in graphs

Similar Messages

Maybe you are looking for