OBIEE 11G - The database Weblogic is trying to connect to is refusing the connection.
Hi,
The database Weblogic is trying to connect to is refusing the connection, per my error messages. Which file will have the JDBC connection information?
Thanks for your time and help.
Can u paste the error log messages?
Similar Messages
-
Unable to open 11g R2 database now after trying an RMAN restore
Hi my database is not opening now.
What I was trying was to restore the database on my new server from latest database taken from my old live server and applying it on my new 11g DB (new server-database already created)
old server-11.1.0.7.0-windows 2003 server 32 bit
new server-11.2.0.3.0-windows 2008 64 bit server
The steps i have done which caused this , (After everything was working fine, i did these foll.steps and now all messed up):
The oracle database on this new server was already 11.2.3.0 -it was not upgrade, i directly installed 11.2.0.3.0 on it + applied latest patches etc.
I took RMAN backup from old server 11.1.0.7.0 oracle database.
Copied this backup to to the new server flash recovery area &every step of the restore was working fine -
in nomount mode, restored the control file from autobackup-fine
in mount mode, catalogued the files-fine (Backup from old live,copied to new live)
I restored&Recovered the database until the latest archivelogs.
Until the above steps-all worked fine like a normal recovery steps.
Then I gave "alter database open resetlogs" in RMAN prompt, it gave out error and from that point onwards I am unable to open the database now.
Unfortunately, couldnt grab full screenshot of the error in RMAN but the error basically said that bootstrap failed and i have to open the database with the upgrade option?
Please see in alert log as well
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Following is the last lines from alert log:
[code]
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Windows NT Version V6.1 Service Pack 1
CPU : 4 - type 8664, 4 Physical Cores
Process Affinity : 0x0x0000000000000000
Memory (Avail/Total): Ph:3760M/8191M, Ph+PgF:9170M/16381M
VM name : VMWare Version (6)
Using parameter settings in server-side spfile F:\APP\ORACLE\PRODUCT\11.2.0\DBHOME_1\DATABASE\SPFILEGEOP.ORA
System parameters with non-default values:
processes = 150
memory_target = 3728M
control_files = "F:\ORACLE11G\ORADATA\GEOP\GEOP\CONTROL01.CTL"
control_files = "F:\ORACLE11G\ORADATA\GEOP\GEOP\CONTROL02.CTL"
control_files = "F:\ORACLE11G\ORADATA\GEOP\GEOP\CONTROL03.CTL"
db_block_size = 8192
compatible = "11.2.0.0.0"
log_archive_format = "ARC%S_%R.%T"
db_recovery_file_dest = "I:\oracle\flash_recovery_area"
db_recovery_file_dest_size= 45G
undo_tablespace = "UNDOTBS1"
sec_case_sensitive_logon = FALSE
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=GEOPXDB)"
audit_file_dest = "F:\APP\ORACLE\ADMIN\GEOP\ADUMP"
audit_trail = "DB"
db_name = "GEOP"
open_cursors = 300
diagnostic_dest = "F:\APP\ORACLE"
Thu Dec 12 17:22:18 2013
PMON started with pid=2, OS id=3440
Thu Dec 12 17:22:18 2013
PSP0 started with pid=3, OS id=10252
Thu Dec 12 17:22:19 2013
VKTM started with pid=4, OS id=11684 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Thu Dec 12 17:22:19 2013
GEN0 started with pid=5, OS id=4528
Thu Dec 12 17:22:19 2013
DIAG started with pid=6, OS id=5652
Thu Dec 12 17:22:19 2013
DBRM started with pid=7, OS id=7676
Thu Dec 12 17:22:19 2013
DIA0 started with pid=8, OS id=5724
Thu Dec 12 17:22:19 2013
MMAN started with pid=9, OS id=6632
Thu Dec 12 17:22:19 2013
DBW0 started with pid=10, OS id=3572
Thu Dec 12 17:22:19 2013
LGWR started with pid=11, OS id=8876
Thu Dec 12 17:22:19 2013
CKPT started with pid=12, OS id=3748
Thu Dec 12 17:22:20 2013
SMON started with pid=13, OS id=8108
Thu Dec 12 17:22:20 2013
RECO started with pid=14, OS id=1932
Thu Dec 12 17:22:20 2013
MMON started with pid=15, OS id=7468
Thu Dec 12 17:22:20 2013
MMNL started with pid=16, OS id=8136
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
ORACLE_BASE from environment = F:\app\oracle
Thu Dec 12 17:22:21 2013
ALTER DATABASE MOUNT
Successful mount of redo thread 1, with mount id 3351347149
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: ALTER DATABASE MOUNT
Thu Dec 12 17:22:26 2013
ALTER DATABASE OPEN
Beginning crash recovery of 1 threads
parallel recovery started with 3 processes
Started redo scan
Completed redo scan
read 11 KB redo, 6 data blocks need recovery
Started redo application at
Thread 1: logseq 3, block 2, scn 59089613795
Recovery of Online Redo Log: Thread 1 Group 6 Seq 3 Reading mem 0
Mem# 0: F:\ORACLE11G\ORADATA\GEOP\GEOP\REDO06.LOG
Completed redo application of 0.01MB
Completed crash recovery at
Thread 1: logseq 3, block 24, scn 59089633817
6 data blocks read, 6 data blocks written, 11 redo k-bytes read
Read of datafile 'F:\ORACLE11G\ORADATA\GEOP\GEOP\TEMP01.DBF' (fno 201) header failed with ORA-01203
Rereading datafile 201 header failed with ORA-01203
Errors in file F:\APP\ORACLE\diag\rdbms\geop\geop\trace\geop_dbw0_3572.trc:
ORA-01186: file 201 failed verification tests
ORA-01122: database file 201 failed verification check
ORA-01110: data file 201: 'F:\ORACLE11G\ORADATA\GEOP\GEOP\TEMP01.DBF'
ORA-01203: wrong incarnation of this file - wrong creation SCN
File 201 not verified due to error ORA-01122
LGWR: STARTING ARCH PROCESSES
Thu Dec 12 17:22:27 2013
ARC0 started with pid=19, OS id=10876
ARC0: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC0: STARTING ARCH PROCESSES
Thu Dec 12 17:22:28 2013
ARC1 started with pid=24, OS id=10912
Thu Dec 12 17:22:28 2013
ARC2 started with pid=25, OS id=6652
Thu Dec 12 17:22:28 2013
ARC3 started with pid=26, OS id=9648
ARC1: Archival started
ARC2: Archival started
ARC1: Becoming the 'no FAL' ARCH
Thread 1 advanced to log sequence 4 (thread open)
ARC1: Becoming the 'no SRL' ARCH
ARC2: Becoming the heartbeat ARCH
Thread 1 opened at log sequence 4
Current log# 4 seq# 4 mem# 0: F:\ORACLE11G\ORADATA\GEOP\GEOP\REDO04.LOG
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
SMON: enabling cache recovery
Archived Log entry 64945 added for thread 1 sequence 3 ID 0xc7c27920 dest 1:
Errors in file F:\APP\ORACLE\diag\rdbms\geop\geop\trace\geop_ora_12260.trc:
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Errors in file F:\APP\ORACLE\diag\rdbms\geop\geop\trace\geop_ora_12260.trc:
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Error 704 happened during db open, shutting down database
USER (ospid: 12260): terminating the instance due to error 704
Instance terminated by USER, pid = 12260
ORA-1092 signalled during: ALTER DATABASE OPEN...
opiodr aborting process unknown ospid (12260) as a result of ORA-1092
Thu Dec 12 17:22:33 2013
ORA-1092 : opitsk aborting process
[/code]
Please please please let me know what steps should I do now to get my 11g database operational again?
Now when i am trying:
(SQL prompt)
[code]
>sqlplus "/ as sysdba"
SQL*Plus: Release 11.2.0.3.0 Production on Thu Dec 12 17:22:05 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup open;
ORACLE instance started.
Total System Global Area 3891630080 bytes
Fixed Size 2261120 bytes
Variable Size 2147487616 bytes
Database Buffers 1728053248 bytes
Redo Buffers 13828096 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Process ID: 12260
Session ID: 5 Serial number: 5
SQL> startup open upgrade;
SP2-0714: invalid combination of STARTUP options
SQL> startup upgrade;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL> startup upgrade open;
SP2-0714: invalid combination of STARTUP options
SQL> alter database mount;
ERROR:
ORA-03114: not connected to ORACLE
SQL> shutdown immediate;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL> startup nomount
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL>
[/code]This is why you do backups both before and after doing other things.
So one way to do something like this:
Backup old db.
expdp old db.
Install new 11gR2, create database.
Back it up.
Turn off archivelog.
impdp
Turn on archivelog.
Back it up.
The general thought here is you would start over with the first new db backup if the imp didn't work, you turn off archiving to avoid generating lots of redo that would be for a recovery you would never do.
There is more than one way to do it (TIMTOWTDI), best way depends on details, including volume of data and platform changes. expdp/impdp has an over the network option if disk space is limited and network is fast.
I usually allow for several tries when going to a new box, since the new box will require testing anyways. -
I have a database of names. When I go to the database and pull up names I right click on the option "Open in new tab". I would like to bring up 200 names and do the same function simultaaneously to them like, add a vote to their total individual vote count. Is this possible?
I ended up reformating the drive as FAT32 because I still need to use it on my Windows 98SE system also. I did have a problem with the allocation size. I wanted to use 512 bytes but it kept failing so I used the default size(8192 bytes) and then it worked fine. I didn't think there would be a problem formatting as NTFS but since you are having problems I just tried it. It failed at 512 bytes allocation size so I tried again using 4096 bytes, the default, as the allocation size and it failed again. It looks like these drives will not format as NTFS.
Also, I think I figured out what's going on with the ReadyBoost problem. As I said initially it wouldn't work with ReadyBoost then after I had 12GB of data on the drive the ReadyBoost feature started working. After I deleted all the files it quit working again. After doing some reading on the net about Flash drives and ReadyBoost problems it appears that the memory chips on my Lenovo Flash drive are mixed with both fast memory chips that work fine with ReadyBoost and slower memory chips that are too slow for ReadyBoost. Apparently, after I fill up the portion of memory with data that uses the slow chip(s) then ReadyBoost works fine with the fast chip(s). I also verified the Flash drives read and write memory speeds using Vista's Event Viewer. To work with ReadyBoost the Flash drive has to read at a minimum of 2.5MB/s (for 4KB random reads) and write at a minimum of 1.75MB/s (for 512KB random writes).
Let me know what you find out. -
My iPhone will not restore the process starts and then a message pops up saying 'we are unable to continue with your activation at the time' I have tried a few times now and the same. What can I do ? As I can't use iPhone at all now!!
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743 -
Can I install OBIEE 11g and Database 11g on the same machine?
Hi experts
i have some confusion...
i have oracle database 11g on one of my server.
i want to install OBIEE 11g on that same machine...
i just want to be assure that will it cause any problem or conflict..
because i set ORACLE_HOMe=/home/oracle/app/oracle/product/11.2.0/dbhome_1
and i have to set ORACLE_HOME for OBIEE also....
Please let me know what how to give...and is there any other way
Thanks
Abhishek AnandHi Abhishek,
You can install or mount both DB and OBIEE on same machine, but check out the disk space and memory needed should be more to accomodate both.
Cheers,
KK -
When I use Lookout Modbus driver OPC to communicate with my instrumnets, I edited the database number such as 41202 that has a Write attribute in my instrumnet manual, the OPC explorer got bad data, and the OPC server gave the illegal address alarm, when I input the address such as 41203 that has R/W attribute, it worked very well. Is there a way to fix this problem. When I used other OPC server, there was no this kind of problem. Thanks!
Thanks for your suggestion. I checked the Modbus manual of my instrument, the register is 16 bit. I tried to edit the data according to the Modbus data member in lookout modbus drivere server for several different member, but the OPC still gave me the illegal address. I think the problem may be produced by their attribute, for the address 1201 and 1202, they have the write attribute, for other addresses, they have W/R attribute, and they can be read or write through Lookout OPC server perfectly. when I used the demo OPC server from other company, it can work well, but it is not convinient for me to use Labview when I use that software. I prefer NI Lookout OPc server. I am using the Lookout 4.5. I am wondering whether the Lookout has some shortcoming when I
use the Modbus driver. Please give me any suggestion, is there any newest version of Lookout OPC sever? Thanks! -
I was trying to add and app to my iphone and was not able to do so. It wanted updated credit information. So, I entered it and it will not accept the month of experation. I have shut the phone down, sync it to the computer to update. Will not work. What can I do to continue?
Off the top I dont thing its good practice to post an email address here
I dont see how a google password change would impact on ur Apple ID/iTunes account
Have u access to the old email address? If not and you fail the apple security process then you need to call them
Have u tried to manage ur apple id from : appleid.apple.com -
My ipad is frozen with a black screen with a picture of a cord leading to the itunes icon. i tried to shut down my ipad but the turn off icon wont show instead the itunes icon with the cord keeps coming out everytime i open my ipad. what should i do ? and i dont want to lose my pictures, videos and other documents in my ipad please help me ....
I hope you have a backup if you don't want to lose your iPad contents. You have to restore the iPad now using iTunes on your computer. That's what the message on the screen means.
Take a look at this.
http://support.apple.com/kb/ht1808 -
As above. I can not find any were to close the right side page?
Opening in the side bar is the default for bookmarks that are created via a link or button on a website.<br />
You can check the Properties of a bookmark via the right-click context menu in the side bar (Ctrl+B; Cmd+B on Mac).<br />
In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.<br />
Make sure that "Load this bookmark in the side bar" is not selected.<br /> -
I created a new playlist and added some songs to another existing one. When I synched with my PC, it loaded the new playlist heading but 0 songs, but did add the new songs to the existing playlist. Repeated the process several times without success.
This earlier post may help.
https://discussions.apple.com/message/10859194#10859194
For me, (long winded way) I drag the playlist from the bottom tree to the iPod branch.
Then select iPod.
Click the music tab on the right window.
click sync tick music
go down to the playlist section and tick the playlist.
Apply.
Good Luck. -
OBIEE 11g RPD and Weblogic Identity Management
Hi,
I have an issue where only users from one weblogic Provider (LDAPAuthenticator) can log into OBIEE.
New users created using the default provider (DefaultAuthenticator) cannot log in (the exception is the Administrator user which was upgraded from 10g).
If I open the RPD in online mode and connect to 'Identity Management', I do not see the new users above in the list (i.e. they have not been pulled down by OBI)
Error message in the logs show "authentication passed, however use cannot be found in identity store" - which makes sense as I do not see them in the RPD. Any ideas?
N.B: New application roles in weblogic are syncing with the the RPD correctly.Thanks for your reply Paul. That is quite a drawback if it is the case. I guess the fall back is to implement one authenticator and if that fails, it would pass on to the RPD authentication (like in 10g)? Have you by chance managed to implement the 'act as' obi functionality with the weblogic authenticator setup?
-
Change OBIEE 11g URL in weblogic?
Hi All,
I want to customize the default OBIEE URL from:
http://<servername>:9704/analytics/saw.dll?Dashboard to http://<servername>:9704/analytics_abc/saw.dll?Dashboard.
I took a look at the forum but no where I could find for weblogic 10.3.5. Everywhere it is for OC4J and IIS.
Can anyone throw some light on Weblogic part?So you spoofed the values of the 2nd column to have the report act almost like a menu listing?
if that's the case then check the data type of column 2, it should be set to HTML. Then you will just need to build your HTML tag within the column formula.
Example below bins the year name into a Link HTML Tag:
'<a href="http://'|| CASE WHEN "Time"."T05 Per Name Year" = '2011' THEN 'www.google.com' WHEN "Time"."T05 Per Name Year" = '2012' THEN 'www.yahoo.com' ELSE 'www.apple.com' END || '" target="_blank" > ' || CASE WHEN "Time"."T05 Per Name Year" = '2011' THEN 'www.google.com' WHEN "Time"."T05 Per Name Year" = '2012' THEN 'www.yahoo.com' ELSE 'www.apple.com' END || '</a>'
if that is not what you are attempting to do, please clarify. -
I tried to remove my credit card information from the iTunes Store and from my IPad there is no option of none only edit
How to Get Apps From the App Store Without a Credit Card
http://ipadhelp.com/ipad-help/how-to-get-free-apps-from-the-app-store-without-a- credit-card/
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
http://support.apple.com/kb/ht2534
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/ts5366
If None is not available - On your computer launch iTunes and click “iTunes Store” in the left navigation pane. Click the “down arrow” next to your name at the top right side of the page and click “Account.” Enter your username and password and click “View Account” to log into your account information. Next to your Payment Type, click “Edit.” Select the “None” button and click “Done.” Confirm that your card has been removed by returning to the Apple account information screen. Under Payment Type, it should say that there is no credit card on file.
iTunes Store: Changing your payment information
http://support.apple.com/kb/HT1918
iTunes Store Accepted Forms of Payment
http://support.apple.com/kb/HT5552
Cheers, Tom -
I was in the middle of updated iOS7 onto my 4s then it crashed, tried to restore and backup and it wont power off restart it just shows a black screen.
Tried the tips
Does not recognise my phone as I updated Itunes to see if this would work and I have lost all my back ups and every thing,
when i try the power on butter and the home button I get the apple icon, then it shows power cord and itunes logo and then returns to a black screen, I can hear it beeping like when you put it on the charge each time this happens on my PC.
please can anyone else help me???Unable to Update or Restore..?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Take your time... Pay particular attention to Steps 3 and 4
Note:
Some users have reported as many as 8 or 9 attempts were necessary before success. -
I'm the Adnin. just recently I tried to update system software (Lion OS). The following message was returned. None of the selected updates could be saved. A network error has occurred. Check your Internet connection, and then try again. but I have internet access )email, Safari, etc.). Any idea of what is happenening?
The error may be at Apple's end rather than yours. It could also be due to corrupted files on your computer. Try deleting the following:
/Home/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Caches/com.apple.SoftwareUpdate/
/Library/Preferences/com.apple.SoftwareUpdate.plist
Restart your computer.
Maybe you are looking for
-
Can u tranfer money from one account to another on the itunes
We had received gift cards for itunes and were told we needed a separate acct but the kids cannot purchase games on ipodusing the new account that we were told we needed to set up.
-
When using my iMac the screen judders momentarily
Mu imac screen judders, freezes momentarily then goes back to normal. Annoying more than anything but I ask whether this cd be anything potentially serious?
-
Adding icon in JTableHeader (Java 1.3)
I need to add Up, Down or not Icon in the header sorted Table with java 1.3.1 Can you send my some example ?
-
For some reason when i open mozzila the site myplaycity comes up why is that?
i thing that page might be bookmarked but im not sure
-
Final Cut HD-Print to video problem
Hello brainy people and Help! I am experiencing problems with the Print to Video function. The mac switches the machine on and puts the canon into REC mode, the tape goes round and it records. However on playback there is no image. I have tried tweak