Object position controlled by time

So, i want to control the position of a white box by using expressions because i can't use keyframes as i want (or i'm just stupid).
I already have
a = thisComp.layer("White box").effect("Sound Keys")("Output 1")*1;
b = thisComp.layer("White box").effect("Sound Keys")("Output 2")*1;
c = thisComp.layer("White box").effect("Sound Keys")("Output 3")*1;
y = a,b,c;
value - [0,y];
in the white box's expressions, so what i can do now to control the box's position with time?

Just a shot in the dark:
if (time > 5)
  mult = 3
else
  mult = 1;
a = thisComp.layer("White box").effect("Sound Keys")("Output 1")*mult;
b = thisComp.layer("White box").effect("Sound Keys")("Output 2")*mult;
c = thisComp.layer("White box").effect("Sound Keys")("Output 3")*mult;
y = a+b+c;   // is this what you meant?
value - [0,y];
You could also tie the mult variable to a slider control, which you could keyframe over time.
Dan

Similar Messages

  • Track several object at the same time

    Hi everybody,
    I`m actually trying to tracking several same objects at the same time.
    I knew how to do with only one object, and I was able to send the coordinate for each frame in excel. So great.
    But now I`m trying to modifiy the code to follow eight objects at the same time.....
    My code was already HUGE with one or two objects, but I need to add again 6 part of the same code....
    I would like to compact and contract my code to be more clear.....
    I suppose there is one solution juste after Labview vision assistant. And i`m sure that there is a way to put all the code to delete the zeros in only one for loop but I didn`nt find the right way....
    Anyway if there are some propositions or some ideas, advices..... it`s welcoming
    Thks a lot
    Sincerely
    Maxime 
    ps: I put my codewith only two patterns
    Attachments:
    Simple tracking.vi ‏146 KB

    Yeah -- you have 4 separate tracks with the same audio? Select all 4 tracks/clips in your Event and select Synchronize Clips. You end up with a compound clip in the event with all 4 clips synchronized to the audio. Open the compound clip in a Timeline and select all 4 clips. Use  Video > Transform and type in ~48% (if you want the "gutters") to resize all the clips at once. With the transform icon (lower left corner of the canvas) selected, drag each of your clips out to the four corners (or type in exact position values in Video > Transform > Position parameters.) To get the white background, you can use Generators > Elements > Shapes - set the color to whatever you like; select Rectangle from the drop down and Video > Transform > Scale to expand it to full screen. Drag the generator underneath your storyline to use as a background.
    If you don't have audio to synch to, you can create multiple storylines. Add the first clip; reset the playhead and select your other clips that will appear in a 4-up and type Q to *connect* them to the storyline. Then select each one separately and right click > Create Storyline (or type command - G). You can then open each storyline in its own timeline (right click and select Open in Timeline) and append more clips to each "track". Back in the main storyline, drag out each connected storyline to reveal any appended material. The trim control will turn red when you reach the end of media in the created storylines. Resize and arrange as described above.

  • Position Control of compumotor linear servo table and GV-U6E with PCI-7344

    I'm referring PCI-7344 (not 7334).
    I have the GV-U6E which is a drive only and does not possess control functionality. the drive only version does not store or use programs. So, serial commands can not be sent through COM port by LabVIEW even though A few basic commands can be emulated.
    I am trying to do position control as I mentioned. For example, the motor should move A point to B point exactly with a certain speed. The points must be aboulte position.
    I would like you to see the reference comment that I have been contacting with in your website forum.
    http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000DD490000&USEARCHCONTEXT_CATEGORY_0=_14_&USEARCHCONTEXT_CATEGORY_S=0&UCATEGORY_0=_14_&UCATEGORY_S=0
    Regard,
    Jin Ho Lee
    ----- Original Message -----
    From:
    To:
    Sent: Thursday, September 26, 2002 5:00 PM
    Subject: Re: (Reference#1549-QYW196) "Position Control of linear servo table and GV-U6E with PCI-7344
    >
    > Note: Your reference number is included in the Subject field of this
    > message. It is very important that you do not remove or modify this
    > reference number, or your message may be returned to you.
    >
    >
    > JinHo. Compumotor is a very popular brand, and I know of several customers
    > who integrate our 7334 with Computmotor drives. However, when you say that
    > the MAX configuration doesn't fit in the compumotor drive settings, are you
    > referring to the specs from the 7344? It looks like the 7344 and the
    > Compumotor will work well together through a UMI break out box. If you're
    > referring to specific commands that the Compumotor receives, I'd have to
    > know more about the protocol. If the Compumotor needs serial commands,
    > then you can send them through the computer's COM port from LabVIEW.
    > Please let me know exactly what kind of configurations you're trying to
    > set. The 7344 can be completely configured in MAX and LabVIEW.
    >
    >
    > Best Regards
    >
    > Kyle Voosen
    > Applications Engineer
    > National Instruments
    > http://www.ni.com/support
    >
    > ------------------------------------------------------------------------------
    >
    > Problem Description :
    > "Position Control of compumotor 406LXR linear servo table and GV-U6E(motor
    > drive) with PCI-7344"
    >
    > "Since I had the answers referring:
    > http://exchange.ni.com/servlet/ ProcessRequest?RHIVEID=101&RPAGEID=135&
    > HOID=506500000008000000DD490000& USEARCHCONTEXT_CATEGORY_0=_14_&
    > USEARCHCONTEXT_CATEGORY_S=0& UCATEGORY_0=_14_&UCATEGORY_S=0
    >
    > Wiring step was done well. However, I still have a problem that MAX
    > configuration doesn't fit in compumotor drive settings. Therefore, the
    > setup is shown below, and I want to know how I can set up PCI-7344
    > configuration in MAX or LabVIEW VI.
    >
    >
    > -----------------------------------------------------
    >
    > Uploaded from device address 0
    >
    > Gemini GV Servo Drive Setup
    >
    >
    >
    > Motor Setup
    > DMTR 1703
    > Motor ID (406-x-LXR-M-x-D13-x-x-x-x-E5-x-x-x)
    > DMTIC 2.48
    > Continuous Current (Amps-RMS)
    > DMTICD 0.00
    > Continuous Current Derating (% derating at rated speed)
    > DMTKE 17.6
    > Motor Ke (Volts (0-to-peak)/krpm)
    > DMTRES 10.10
    > Motor Winding Resistance (Ohm)
    > DMTJ 119.300
    > Motor Rotor Inertia (kg*m*m*10e-6)
    > DPOLE 1
    > Number of Motor Pole Pairs
    > DMTW 40.5
    > Motor Rated Speed (rev/sec)
    > DMTIP 7.40
    > Peak Current (Amps-RMS)
    > DMTLMN 3.4
    > Minimum Motor Inductance (mH)
    > DMTLMX 3.4
    > Maximum Motor Inductance (mH)
    > DMTD 0.000000
    > Motor Damping (Nm/rad/sec)
    > DMTRWC 0.23
    > Motor Thermal Resistance (degrees Celsius/Watt)
    > DMTTCM 20.0
    > Motor Thermal Time Constant (minutes)
    > DMTTCW 0.33
    > Motor Winding Time Constant (minutes)
    > DMTAMB 40.00
    > Motor Ambient Temperature (degrees Celsius)
    > DMTMAX 90.00
    > Maximum Motor Winding Temperature (degrees Celsius)
    > DHALL 1
    > Disable Hall Sensor Checking
    > DMTLQS 0
    > Set Q Axis Inductance Saturation
    > DMTLDS 0
    > Set D Axis Inductance Saturation
    > DTHERM 0
    > Disable motor thermal switch input
    >
    >
    >
    > Drive Setup
    > DMODE 2
    > Drive Control Mode
    > DRES 8400
    > Drive Resolution (counts/rev)
    > DPWM 16
    > Drive PWM Frequency (kHz)
    > SFB 1
    > Encoder Feedback
    > ERES 8400
    > Encoder Resolution (counts/rev)
    > ORES 8400
    > Encoder Output Resolution (counts/rev)
    > DMEPIT 42.00
    > Electrical Pitch (mm)
    > SHALL 0
    > Invert Hall Sensors
    > DMTLIM 1.5
    > Torque Limit (Nm)
    > DMTSCL 1.5
    > Torque Scaling (Nm)
    > DMVLIM 119.000000
    > Velocity Limit (rev/sec)
    > DMVSCL 119.000000
    > Velocity Scaling (rev/sec)
    >
    >
    >
    > Load Setup
    > LJRAT 0.0
    > Load-to-Rotor Inertia Ratio
    > LDAMP 0.0000
    > Load Damping (Nm/rad/sec)
    >
    >
    >
    > Fault Setup
    > FLTSTP 1
    > Fault on Startup Indexer Pulses Enable
    > FLTDSB 1
    > Fault on Drive Disable Enable
    > SMPER 8400
    > Maximum Allowable Position Error (counts)
    > SMVER 0.000000
    > Maximum Allowable Velocity Error (rev/sec)
    > DIFOLD 0
    > Current Foldback Enable
    >
    >
    >
    > Digital Input Setup
    > INLVL 11000000
    > Input Active Level
    > INDEB 50
    > Input Debounce Time (milliseconds)
    > INUFD 0
    > Input User Fault Delay Time (milliseconds)
    > LH 0
    > Hardware EOT Limits Enable
    >
    >
    >
    > Digital Output Setup
    > OUTBD 0
    > Output Brake Delay Time (milliseconds)
    > OUTLVL 0100000
    > Output Active Level
    >
    >
    >
    > Analog Monitor Setup
    > DMONAV 0
    > Analog Monitor A Variable
    > DMONAS 100
    > Analog Monitor A Scaling (% of full scale output)
    > DMONBV 0
    > Analog Monitor B Variable
    > DMONBS 100
    > Analog Monitor B Scaling (% of full scale ouput)
    >
    >
    >
    > Servo Tuning
    > DIBW 1500
    > Current Loop Bandwidth (Hz)
    > DVBW 100
    > Velocity Loop Bandwidth (Hz)
    > DPBW 40.00
    > Position Loop Bandwidth (Hz)
    > SGPSIG 1.000
    > Velocity/Position Bandwidth Ratio
    > SGIRAT 1.000
    > Current Damping Ratio
    > SGVRAT 1.000
    > Velocity Damping Ratio
    > SGPRAT 1.000
    > Position Damping Ratio
    > DNOTAF 0
    > Notch Filter A Frequency (Hz)
    > DNOTAQ 1.0
    > Notch Filter A Quality Factor
    > DNOTAD 0.0000
    > Notch Filter A Depth
    > DNOTBF 0
    > Notch Filter B Frequency (Hz)
    > DNOTBQ 1.0
    > Notch Filter B Quality Factor
    > DNOTBD 0.0000
    > Notch Filter B Depth
    > DNOTLG 0
    > Notch Lag Filter Break Frequency (Hz)
    > DNOTLD 0
    > Notch Lead Filter Break Frequency (Hz)
    > SGINTE 1
    > Integrator Option
    > SGVF 0
    > Velocity Feedforward Gain (%)
    > SGAF 0
    > Acceleration Feedforward Gain (%)
    > -----------------------------------------------------
    >
    >
    > Regards,
    > JinHo"
    > NI Software :
    > LabVIEW version 6.0
    > NI Hardware :
    > Motion Control device PCI-7344
    > Driver Version :
    > no
    > OS :
    > Windows 2000
    > CPU :
    > Pentium
    > RAM :
    > 128
    > Vendor :
    > DELL
    > Customer Information :
    > Jin Ho Lee
    > North Carolina State Univ.
    > US
    > [email protected]
    > Ph: (
    > 919
    > )
    > 512-9929
    >
    >

    Yes, we used an NI PXI-7344 motion control card with an NI UMI-7764 box connected to a Gemini GV-U12E servo drive. (which is a drive only.)
    We did positional control in absolute position mode.
    I can send you an AutoCAD schematic detailing how to connect the UMI-7764 to the Gemini GV servo drive.
    In regard to the Rs232 interface to the GV servo drive,
    the GV drive only model is "configurable" not "programmable". You can create unique GV configuration files with Compumotor's Motion planner then download the configuration via Rs232 using LabVIEW as desired. Or, using LabVIEW via Rs232 you can change individual GV drive parameters on demand,
    or use the GV's two analog outputs back to LabVIEW's analog inputs to measure commanded motor current or torque, etc.etc.etc

  • Analog Fedback for position control

    Hi all,
    Its been a long time since I have written into this discussion forum. I have a question. Till now I have been using encoder as a feedback device for position control in PCI 7342 motion controller. Now I want to know about position control using the analog input channel. I cant figure out how the controller understands the equation between input voltage and position.
                                                               Say X Volts = How many mm of movement?
    With the encoder f/b the motion controller knows the encoder pulse per revolution and it keeps counting the feedback and generates motion accordingly. How is it done with analog feedback. My application involves an LVDT which give proportional analog feedback with respect to the displacement. Please help me oiut on this. Also is position compare and breakpoint feature relevant to this particular problem?

    Hi Giridhar,
    it's good to see you back in the forums.
    I have posted a document to another thread that contains a detailed description of the analog feedback feature.
    I hope that helps,
    Jochen Klier
    National Instruments Germany

  • Position Control - HR or Finance?

    It is believed that HR should manages the org structure and control the increases/decreases in positions.  Since Finance is managing the Budgets how do the increases, decreases or movement of positions monitored and reflected in the financial budgets?  Does Finance approve the changes to the number of position? or does Finance get a report to monitor the budget of positions?  If yes, which would be the best report so that Finance can get the information they need to monitor position budgets?  
    I just like to know how other international organizations manage their org structure and position control and the Finance department's involvement in controlling the budgets.  If available kindly send me links to documents or white papers on the subject.
    Thanks for your help.

    as you said
    HR shd manage the Organisational structure
    and Finance Budgets right
    The finance people can know Cost incurred for all the employees
    based on the PERSONAL NUMBERs and the results will posted to fico and u will get thru Cost Center  and that is assigned to GL account
    here the Personal number is assigned to the Position and cost Center is assigned to Position or Personal Number
    so when u hire an employee he shd occupy certain postion and that position shd assigned to Cost Center
    and Cost Center will gives the details of the Balances and Expenses Right
    >here there might be a question wht in case for Vaccant Positions as there are not used these position will not come into the PICture unless they are assigned to the person
    so the control shd be with in the HR as some times the Person may move form one orgunit to another orgunit at that time
    the cost center will get differs right ???  and the first person who gets intimation towards tranfer of the employees is the HR

  • NI 9505 Closed Loop Position Control Example

    Hello, I have a cRIO 9073 with a NI 9505 module that I'd like to use for simple position control of a unit along a lead screw.
    I don't have the softmotion module, and am trying to write a program bassed off of the "Position Control (closed loop) - NI 9505" example to control the position the small motor attached to the lead screw (Faulhaber 2342S024CR with a 512 count/rev encoder that we had laying around)
    I've reviewed the manual PID tuning example, and have not had much luck getting the response that I'd like when making large position moves simply by adjusting Kp,Ki,Kd gains of the position loop, as the overshoot remains too high for this application when making large moves.  The system is also oscillating about the set point, and doesn't ever seem to dampen out unless I change things other parameters on the fly such as the current limit, or current loop parameters (osciallations get worse as current limit is increased).
    Can someone advise me if the components of this example are up to this task?  Or on the interactions between the current limit, current loop parameters, and position loop parameters from this example, and which parameters would have the most impact on achieving desirable system performance?
    Is there a VI available that can autotune such a motor?

    Hello - there are many reasons why a closed loop controller can oscillate - from correct settings of controller (kp,ki,kd) to making sure signals act in the appropriate direction to deadband/friction in the actuator to badly sized signals/actuators.
    Firstly, have a look at the signal your controller is outputing (ideally in LabVIEW so you can graph it). Does it oscillate - perhaps as a sawtooth, a sinewave or simply switching between maximum and minmum values. I presume the electrical motor driving the screw which is driven from some AO signal from the cRIO (could also be a PWM signal driving the motor).
    I expect (from what you say about current limit) the control signal will be oscillating by switching between maximum and minimum (e.g. +10V to -10V) or oscillating like a sinewave. What values of kp, ki, kd are you using ? If kd is non-zero, set it to zero (you only need worry about this if you want to get maximum performance). Is ki non-zero ? Try setting it to zero - any better ? If you are still getting big oscillations in your control signal, keep reducing kp (e.g. half each time?) until oscillations disappear (as you reduce kp, control signal *should* get smaller - maybe not straight way though).
    If this does not make oscillations go away, then it may be that you have a sign wrong in your loop - i.e. a positive control signal makes lead screw move in opposite direction controller expects. This should be a fundamental thing sorted out when setting up the loop - you could do an open test to check which way +ve voltage moves lead screw. If you find it moves in opposite direction - you can either re-wire, or put a "-1" gain on controller output.
    If there is any more subtle oscillations / obersvations, then try to show some plots of the lead screw motion and control signal, as that always helps when trying to diagnose what is going wrong.
    Good luck.
    Consultant Control Engineer
    www-isc-ltd.com

  • Stepper motor positioning control system

    hello
    Iam building positioning control system using a stepper motor, and I need to know what are some position sensors available to feedback the position of the stepper motor.. Also I need to know how can use a C code in the labview...For example, if I have an algorithm developed in C; How can I use that code in the labview..
    Thanks
    Shaham

    Shaham,
    Below is a link to several encoders that NI provides specifically for stepper motors.
    Quadrature Encoder:
    http://sine.ni.com/nips/cds/view/p/lang/en/nid/205321
    As far as the C code is concerned, this can be accomplished in two different ways, provided that the code is first placed in a dll file.  
    First, you can import the dll into a project library, by selecting Tools»Import»Shared Library.  This option is good for code that will be used often, as it creates wrapper VIs for each function that can be reused.
    Secondly, a "Call Library Function" node can be used to call a C function from a dll.  This procedure is shown in the following tutorial, and is useful when code only needs to be called a few times.
    http://decibel.ni.com/content/docs/DOC-9069
    I hope this helps!
    Drew
    Drew T.
    NIC AE Specialist

  • PID position control : guide me

    Dear member
    I want to built a PID position control 
    i read the DC position through potentiometer with -128 to 127 [full 360 degree]
    so the input to the pid is voltage range between -128 to 127
    the input of dc motor is PWM and the motor rotate direction
    so the PID output will be PWM 
    what about direction bit ??? What will be it circuit
    also how to control the speed in same system ?? is thire another PID?? 
    best regards
    hi ?Q>
    Solved!
    Go to Solution.

    nathand wrote:
    mangood wrote:
    what about control the position and the speed at same time ???
    That's a complicated problem. A quick internet search turned up this paper which describes some possible approaches:
    http://www.idt.mdh.se/kurser/ct3340/ht09/ADMINISTRATION/IRCSE09-submissions/ircse09_submission_22.pd...
    okkkkkk
    terrific paper
    hi ?Q>

  • How to rotate and translate an object at the same time??

    Hi, I have a problem with rotation and translation of an object at the same time. I wrote a behovior class for my object (a cylinder). When some conditions are true the cylinder is added to a robot arm. Then it is translated so that the cylinder would be very close to the arm (looks like the robot is holding it). And now the behavior should also rotate the cylinder because the angle is 0 and it should be 90. I can translate the object or I can rotate the object but when I'm trying to do it at the same time (I want to combine rotation and translation) it doesn't work.
    Could anyone help me, please :)

    You can used to Matrix3f
    This object is a rotation and translate matrix
    for example:
    private void componerTransformada(){
    Quat4f rot = new Quat4f((float) this.getRotacionSobreX(),(float) this.getRotacionSobreY(),
    (float) this.getRotacionSobreZ(),1.0f);
    Vector3f tras = new Vector3f(-4.0f,-4.0f,(-1)*this.getDistanciaDeLaCamara());
    this.setTransformacion(new Transform3D(new Matrix4f(rot, tras, 1.0f)));
    Quat4f is a matrix of ratation
    vector3f is a direction vector
    Transform3d is building with Quat4f and Vector3f.
    That is work i use this to situe the view of point.
    good locky

  • Controlling Maximum Time in an application

    Controlling Maximum Time in an application -->> I do not understand why the post and answers were removed. Please help or send email on what I need to do as I am not an experienced user. (I looked under "My Questions", but it says that i do not have the right permissions to read.)
    Administration » * Posts Removed by Hosts, Nov 4, 2006 4:01 PM, Replies: 4
    I want to limit how much my son plays his computer game. Is there a supervisor type of application with a time limit that allows (under parent password control) the use of an application?
    Thank you. Carlos.
    iMac Mac OS X (10.4.8) Re-post, need clarification

    Carlos,
    The parental controls built into Mac OS X 10.4 can only restrict your child's account to certain applications - not enforce a time limit on that specific game or application.
    If the basics of parental control are not up to what you want - you might look to a third party product such as http://www.lumacode.com/macminder/

  • How do I handle a count overflow while running "end's" rotation drive in position control?

    Hi everyone!
    We run a direct drive in position control mode and normally do oscillating movements i.e. +-10°. The Signal we get is a TTL with 120 counts/°. And with those counts we do our control.
    But now we want to run the motor permanent one direction for some days (or 4 ever :-). That means that we get sooner or later a overflow on the count variable. So I think we have a problem when the setpoint is on Overflow -32767 and the Position is 32767. ( I know that I can increase the Integer Value but that does not solve it at the end :-)
    How can I handle that?
    Is there any programmatic approach?
    Thanks for Help!

    Hi Petric,
    I do see the math but that does not help when I have more then one overflow, right?
    Well, you have to make sure you NEVER miss such an overflow event. It would be a big problem if you would detect just every second overflow…
    I got a big issue when the setpoint is jumping due to overflow! I have to handle that primarly.
    Have your control loop work with arbitrary units.
    Convert your measurement signal to arbitrary unit with handling overflows in this step.
    Convert your control output to output signal handling overflows as well…

  • NI pci 6251 position control

    Hi
    Im new to this forum and new to Labview and NI pci 6251 as well ;(
    I'm using NI-PCI-6251 (DC Motor ) with Labview to control the position of a DC motor  we developed the program that reads the encoder and display the position of the DC motor shaft
    but the problem is that the counter 0 (cnt0) always increases whether the disc rotating clockwise or anticlockwise??!! and when the desired position is reached the controller does nothing to stop the motor ?
    i don't know what is the problem or why its happening.

    Hi,
    I am also doing something similar.
    The problem is the motor is the DC motor from Quanser. (DCMCT).
    I know the encoder channel of the motor is ctr0 and when I test from "Measurement and Automation Explorer" (Labview>>Tools) I can only read the PFI8 channel.
    The motor read 4096 pulses per revolution and no reading is available from PFI10. As per Quanser the motor should be about to do position control. I have seen lab tutorials for position control in internet.
     I tested both the vi is mentioned above. The "Example" vi reads the motor position in terms of pulses. But when I rotate the motor in the other direction the count increment not decrement.
    Also the quadratureencoderMseries vi did not read the angle position when I set the channel values.
    I have attached the parameters that I set.
    Can any one please check..
    Thanks.
    Attachments:
    encoder issue.JPG ‏357 KB

  • I always have to hit Control + 4 times to make all pages large enough to read and want to lock this size in on startup.

    Every time that I bring up FF on my 14" laptop, the page display is too small to read easily. I can go to (View) and "zoom" 4 times or hit (Control +) 4 times to give me a good sized page. I would rather have a (Option) choice that would save my personal setting for normal screen zoom for future uses of FireFox.

    The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
    Try the Default FullZoom Level extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/6965
    Or the NoSquint extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/2592/

  • I have a 17" computer, and I'dlike to use the entire screen to view, but in order to do so, I have to press Control + several times at each site.

    I have a 17" computer, and I'dlike to use the entire screen to view, but in order to do so, I have to press Control + several times at each site. I don't want to use "full screen."
    Does anyone know how to set a default to maximize the screen? For some reason, the screen appears even smaller than my old 15" computer.

    Yes, it's a hassle to zoom every single site manually. You can "zoom" all sites using this add-on: [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]. After setting your Global zoom level, you can still fine-tune the zoom on individual sites.
    After installing NoSquint, click the % on the Add-on Bar to call up site preferences, then click the Global Settings button, then the Zooming tab.
    If you don't have the Add-on Bar displayed, you can right-click the new tab button ("+") or a blank area of the tab bar to the right of it and choose Add-on Bar from the shortcut menu.
    You can experiment with sizes larger than 125%, but I wouldn't go much higher than 150% unless you have a large high-resolution monitor.
    If there are particular sites that still present a problem, feel free to post their URLs.

  • How to create an object like "Control Account" in JE? u5982u4F55u7F16u5199u63A7u5236u79D1u76EEu63A7u4EF6

    I want to create a user screen like Journal Entry. How could I create an object like "Control Account" in JE?
    我想编写一个象u201C日记帐分录u201D那样的屏幕,但是不知道其中u201C控制科目u201D列的控件如何编。请教各位高手。谢谢
    Edited by: An Ping Zhang on Sep 15, 2009 4:57 AM

    Dear An Ping Zhang,
    The "Control Account" column in JE is used ChooseFromList.
    You could refer to SDK sample
    SDK\Samples\COM UI\VB.NET\17.ChooseFromList.
    BTW: you could post your question in Chinese into SAP Business One 中文论坛
    /community [original link is broken]
    Best Regards
    Jane Jing
    SAP Business One Forums team

Maybe you are looking for