Object referred to by the object key, does not exist
I am trying to create a transport request for an Item Catagory & get the following error message :
Object R3TR TABU TVAPT, referred to by the object key, does not exist
Message no. TR600
Diagnosis
The object keys of the request/task cannot be edited because the object R3TR TABU TVAPT) which is referenced by the object key is not in the request, nor is it going to be added to the request.
System Response
The function terminates.
Procedure
If the error occurs in an application transaction, extend the missing object entry in the Transport organizer (SE09). If the error occurs again, contact the application hotline.
Hi Nitin,
Please check this SAP Note <b>90799</b>.
Perhaps it will help.
Regards,
Ferry Lianto
Similar Messages
-
For object RF_BELEG 2020, number range interval 50 does not exist FBN1
Hi Guru's
While posting GR i am getting this error
For object RF_BELEG 2020, number range interval 50 does not exist FBN1
kindly guide me to slove this error. Thanks in advance
Regards
AnandhHi Piyush Mishra
I have entered the number range intervals in FBN1. Still the error is existing.
Number range interval 50 means ?? Any specific range of 50 we should give ???
regards
anandh -
For object RF_BELEG LT, number range interval 50 does not exist FBN1
dear all
system showing this message (For object RF_BELEG LT, number range interval 50 does not exist FBN1)Hey Manish,
You can use these t-codes.It can be solved with all together number ranges.
1- OBH2
In this activity, you can determine which intervals of document number ranges are to be copied from one fiscal year into another per company code.
2- OBH1
In this activity, you can copy intervals of document number ranges from one company code to other company codes. To do this, you have to store the following information:
Wish you all the best.
Onur -
Error: For object RF_BELEG 9000, number range interval 92 does not exist FB
Hi,
When I am executing AFAB in test run mode for a particular company code I am getting below mentioned error:
+For object RF_BELEG 9000, number range interval 92 does not exist FBN1+
+Message no. NR751+
+Diagnosis+
+The database table NRIV has the delivery class 'C', i.e. the SAP default+
+settings are only in client 000.+
+Procedure+
+Create the missing number range interval in customizing.+
+Transaction code: FBN1+
When I maintain number range 92 this error goes away. My question is we have no where assigned this number range 92 to any of the Document type then why system is asking to maintain the same?
SanjayHi,
You might be using the number range (say 92 which you've created in GL view & not in ENTRY view).
Steps:
Go to Define Document Number Ranges for Entry View OR use T-code FBN1. Maintain & Assign two Number Ranges say 91 & 92 one for Document Type AF and another for AE for both the non-leading Ledgers say Y1 & Y2 ( Define Document Type for Entry VIew in a ledger). Also assign a number range to
Document type SX (Closing Posting) apart from the above two Number Ranges (91 & 92)
Hopefully it works for You............
Dipti -
For object RF_BELEG OK03, number range interval 33 does not exist
Hi. After new year I opened financial and material periods (01/2008). When I want to make some movement in MB1B - the communicate occurs:
For object RF_BELEG OK03, number range interval 33 does not exist
Could You give me some tip what should I do now?go to j1i9 or snro
enter uour object name
assign here
no range 33 -
For object rf_beleg 3000 number range inerval 50 does not exist FBN1
for object rf_beleg 3000 number range inerval 50 does not exist FBN1
in ob52 i see the following for my cc 3000
from period1 year to period year from period 2 year to period year
3000+ 1 2003 12 2007 13 2007 16 2007
3000A 1 2003 12 2007
3000D 1 2003 12 2007
3000K 1 2003 12 2007
3000S 1 2003 12 2007
when i try to post a goods movement for a po i get the following error
for object rf_beleg 3000 number range inerval 50 does not exist FBN1
is something wrong in this table???????
any help would be great
thank you in advanceHi
This is not connected with Posting periods but with document number ranges.
Create document Number range interval 50 for year 2007 using T.code FBN1.
This should solve ur problem
Regards
Aravind
Assign points if useful -
DB Connector Error : the license key does not include use of OpenSQL driver
Hello,
I am new developer on Crystal Report tool and i face an issue : When I try to refresh data I get the following error message :
DB Connector Error : the license key does not include use of OpenSQL driver.
Does someone know how to get the correct license key ?
Many thanks for your help!
Regards,
ChristianeHi Christiane,
What version of Crystal Reports are you using?
Who owns the OpenSQL driver?
Thank you
Don -
The specified registry key does not exist
I recently reinstalled DPM 2012 R2 (fully updated) after deleting the protection groups, database, wiping the tapes, everything and reconfigured everything from scratch after it became too unstable to use. Unfortunately since then I've found that the
MSDPMCurr.errlog is full events that look like the following:
163C 013C
03/05 18:01:13.420
09
ApplicationSettings_expanded.cs(1387)
NORMAL
Ignoring exception in ReadRegistryKey System.IO.IOException: The specified registry key does not exist.
163C 013C
03/05 18:01:13.420
09
ApplicationSettings_expanded.cs(1387)
NORMAL
at Microsoft.Win32.RegistryKey.Win32Error(Int32 errorCode, String str)
163C 013C
03/05 18:01:13.420
09
ApplicationSettings_expanded.cs(1387)
NORMAL
at Microsoft.Win32.RegistryKey.GetValueKind(String name)
163C 013C
03/05 18:01:13.420
09
ApplicationSettings_expanded.cs(1387)
NORMAL
at Microsoft.Internal.EnterpriseStorage.Dls.Utils.ApplicationSettings.ReadRegistryKey(String registryKeyPath, String registryKeyName, Int32 registryValueKind)
Unfortunately it doesn't tell me what registry key it's looking for so I can't find out if it exists. Is there any way of finding this out?Thanks for the advice, I found the vast majority of them were for cache entries and agree that these can be safely ignored.
HKLM\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Configuration\CacheInquiryResults\<protected server FQDN>
However, I also found the following:
HKLM\Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired
HKLM\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Configuration\gnorableSqlErrorNumbers
HKLM\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Configuration\CloudBackupEnabledApps
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{8AB21D86-21F0-430A-9AD1-2D90077104C3}
HKLM\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Configuration\UI
All of these are missing from the registry is this likely to cause any issues?
Edit: also found this repeated in a DPMRACurr.errlog:
0E08 16CC 03/09 08:30:03.323 05 genericstatus.cpp(1256) [0000000003C32AA0] ED0A1862-1405-438A-ABC8-22CFD64C278E NORMAL
Wait for CallUpdateQfesInstalledRegKey succeeded. Returning m_QfesInstalled = 31
0E08 16CC 03/09 08:30:03.338 03 schannelutils.cpp(129) ED0A1862-1405-438A-ABC8-22CFD64C278E WARNING
Failed: Hr: = [0x80070002] : Error trying to open RegKey [HKLM\Software\Microsoft\Microsoft Data Protection Manager\Agent\2.0\Certificates\<FQDN of backup server>] -
The 'c' XUSER key for the DBM user does not exist or could not be identified
Hello members,
I am getting this message 'The 'c' XUSER key for the DBM user does not exist or could not be identified' in SUM preparation phase while upgrading SOLMAN from 7.01 to 7.1
Does anyone has any idea on this. What steps need to be followed for this.
My DB is MaxDB.
Thanks,
SrikanthHello,
Figured out the problem. Actually SAP System was moved from actual server to Virtual machine on the server. In this process some of the DB configuration got corrupted. And this activity was done by one of our previous employee.
Since this was a standalone system, I took backup of all current configuration and uninstalled SAP and installed new Solman 7.1 SPS12. Issue is resolved now.
Best Regards,
Srikanth
Solman Upgrade from 7.01 to 7.1 stuck in Extraction-PREP_EXTRACT/BEGIN_PRE phase -
The requested resource does not exist - EAR - Jsp
Hy!
Following a tutorial I'm trying to create a small application in the Developer Studio.
I created a Table, an EJB-Project with an Entity Bean and a Stateless Session Bean, a Web-Project with a JSP-File and an EAR which I deployed. Now the JSP form should be available at http://[server-name]:50000/employee/view.
But I get:
404 Not Found - SAP J2EE Engine/6.40
The requested resource does not exist.
Details: Go to main page of this application!
"main page" is a link which refers to http://localhost:50000/index.html which is the SAP Engine Start Page.
This is my first experience with sap netweaver. So I don't know where I should start to search for the problem or how to solve it.
In the web.xml of the WebProject there is the following code for the servlet mapping:
<servlet>
<servlet-name>NewEmployee.jsp</servlet-name>
<jsp-file>/NewEmployee.jsp</jsp-file>
</servlet>
<servlet-mapping>
<servlet-name>NewEmployee.jsp</servlet-name>
<url-pattern>/view</url-pattern>
</servlet-mapping>
This is the code in the application.xml of the ear which should make it possible to access the webproject under .../employee.
<module>
<web>
<web-uri>EmployeeWeb.war</web-uri>
<context-root>employee</context-root>
</web>
</module>
Best Regards,
CarinaHy!
I tried several changes and found out, I just had to remove the ' / ' bevor NewEmployee.jsp in the jsp-file - tag.
<servlet>
<servlet-name>NewEmployee.jsp</servlet-name>
<jsp-file>NewEmployee.jsp</jsp-file>
</servlet>
Now it works and I'm able to test the jsp. There's a form and after a submit a jndi-lookup is performed.
Object ref=jndiContext.lookup("java:comp/ev/ejb/EmployeeService");
It seems the EJB reference in the web.xml:
<ejb-ref>
<ejb-ref-name>ejb/EmployeeService</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<home>com.sap.bsp.EmployeeServicesHome</home>
<remote>com.sap.bsp.EmployeeServices</remote>
<ejb-link>EmployeeEjb.jar#EmployeeServicesBean</ejb-link>
</ejb-ref>
doesn't work, because I get:
com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at java:comp, the whole lookup name is java:comp/ev/ejb/EmployeeService.
Looking forward to a hint
Best regards,
Carina -
Build Error : The name "LocalizedStrings" does not exist in the namespace
I have localised my app to 5 languages, it builds and runs perfectly in Silverlight, but when i open the project in Blend to make changes
it shows the following error
The name "LocalizedStrings" does not exist in the namespace "clr-namespace:appname".
Since it is bound, i need to build it, only then the text is visible :(
Any suggestions?
Alfah
AlfahishamThis is the declaration for the LocalizedStrings.cs
namespace LoveCycles_Free
public class LocalizedStrings
public LocalizedStrings()
private static LoveCycles_Free.AppResources localizedResources = new LoveCycles_Free.AppResources();
public LoveCycles_Free.AppResources LocalizedResources
get
return localizedResources;
And this is my App.xaml
<Application
x:Class="LoveCycles_Free.App"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:phone="clr-namespace:Microsoft.Phone.Controls;assembly=Microsoft.Phone"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:shell="clr-namespace:Microsoft.Phone.Shell;assembly=Microsoft.Phone"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" >
<!--Application Resources-->
<Application.Resources>
<local:LocalizedStrings xmlns:local="clr-namespace:LoveCycles_Free" x:Key="LocalizedStrings" />
<FontFamily x:Key="CicleSemi">C:/Users/PT3560003/AppData/Local/Microsoft/Expression/Blend/Font Cache/pj1jeoqe.v1v/Cicle Semi.ttf#Cicle Semi</FontFamily>
<FontFamily x:Key="PeaSnow">CustomFonts/peasnow.ttf#Pea Snow</FontFamily>
<FontFamily x:Key="CicleFina">CustomFonts/CicleFina.ttf#Cicle</FontFamily>
<Style x:Key="AnimatedButtons" TargetType="Button">
<Setter Property="Background" Value="Transparent"/>
<Setter Property="BorderBrush" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="Foreground" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="BorderThickness" Value="{StaticResource PhoneBorderThickness}"/>
<Setter Property="FontFamily" Value="{StaticResource PhoneFontFamilySemiBold}"/>
<Setter Property="FontSize" Value="{StaticResource PhoneFontSizeMediumLarge}"/>
<Setter Property="Padding" Value="10,3,10,5"/>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="Button">
<Border Background="Transparent">
<VisualStateManager.VisualStateGroups>
<VisualStateGroup x:Name="CommonStates">
<VisualStateGroup.Transitions>
<VisualTransition GeneratedDuration="0:0:0.2"/>
</VisualStateGroup.Transitions>
<VisualState x:Name="Normal"/>
<VisualState x:Name="MouseOver"/>
<VisualState x:Name="Pressed">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneForegroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.812" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleX)" Storyboard.TargetName="ButtonBackground" />
<DoubleAnimation Duration="0" To="0.694" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleY)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
<VisualState x:Name="Disabled">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneDisabledBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.245" Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
</VisualStateGroup>
</VisualStateManager.VisualStateGroups>
<Border x:Name="ButtonBackground" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" CornerRadius="0" RenderTransformOrigin="0.5,0.5">
<Border.RenderTransform>
<CompositeTransform/>
</Border.RenderTransform>
<Border.Background>
<ImageBrush Stretch="Fill" ImageSource="Images/02/but_bg_settings.png"/>
</Border.Background>
<ContentControl x:Name="ContentContainer" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" Foreground="{TemplateBinding Foreground}" HorizontalContentAlignment="{TemplateBinding HorizontalContentAlignment}" Padding="{TemplateBinding Padding}" VerticalContentAlignment="{TemplateBinding VerticalContentAlignment}" FontSize="20"/>
</Border>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
<Style x:Key="AddButton" TargetType="Button">
<Setter Property="Background" Value="Transparent"/>
<Setter Property="BorderBrush" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="Foreground" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="BorderThickness" Value="{StaticResource PhoneBorderThickness}"/>
<Setter Property="FontFamily" Value="{StaticResource PhoneFontFamilySemiBold}"/>
<Setter Property="FontSize" Value="{StaticResource PhoneFontSizeMediumLarge}"/>
<Setter Property="Padding" Value="10,3,10,5"/>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="Button">
<Border Background="Transparent">
<VisualStateManager.VisualStateGroups>
<VisualStateGroup x:Name="CommonStates">
<VisualStateGroup.Transitions>
<VisualTransition GeneratedDuration="0:0:0.2"/>
</VisualStateGroup.Transitions>
<VisualState x:Name="Normal"/>
<VisualState x:Name="MouseOver"/>
<VisualState x:Name="Pressed">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneForegroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.812" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleX)" Storyboard.TargetName="ButtonBackground" />
<DoubleAnimation Duration="0" To="0.694" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleY)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
<VisualState x:Name="Disabled">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneDisabledBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.245" Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
</VisualStateGroup>
</VisualStateManager.VisualStateGroups>
<Border x:Name="ButtonBackground" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" CornerRadius="0" RenderTransformOrigin="0.5,0.5">
<Border.RenderTransform>
<CompositeTransform/>
</Border.RenderTransform>
<Border.Background>
<ImageBrush Stretch="Fill" ImageSource="Images/02/but_bg_password.png"/>
</Border.Background>
<ContentControl x:Name="ContentContainer" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" Foreground="{TemplateBinding Foreground}" HorizontalContentAlignment="{TemplateBinding HorizontalContentAlignment}" Padding="{TemplateBinding Padding}" VerticalContentAlignment="{TemplateBinding VerticalContentAlignment}" FontSize="20"/>
</Border>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</Application.Resources>
<Application.ApplicationLifetimeObjects>
<!--Required object that handles lifetime events for the application-->
<shell:PhoneApplicationService
Launching="Application_Launching" Closing="Application_Closing"
Activated="Application_Activated" Deactivated="Application_Deactivated"/>
</Application.ApplicationLifetimeObjects>
</Application>
Alfahisham -
The name "XYZ" does not exist in the namespace
I was getting error "The name “XYZ” does not exist in the namespace " at here
<UserControl.Resources>
<ms:VisiableConverter x:Key="VisiableConverter"></ms:VisiableConverter>
</UserControl.Resources>
How to solve?
namespace DictionaryApp.Model
public class VisiableConverter : IValueConverter
public object Convert(object value, Type targetType, object parameter, string language)
throw new NotImplementedException();
public object Convert(
object value,
Type targetType,
object parameter,
CultureInfo culture)
bool visibility = (bool)value;
return visibility ? Visibility.Visible : Visibility.Collapsed;
public object ConvertBack(object value, Type targetType, object parameter, string language)
throw new NotImplementedException();
public object ConvertBack(
object value,
Type targetType,
object parameter,
CultureInfo culture)
Visibility visibility = (Visibility)value;
return (visibility == Visibility.Visible);
Next, add the converter in the UserControl's resources. In m
y simple project, I had to create this section - but hopefully you're already using this in your real apps!
You may also need to add an xmlns attribute in page.xaml for your project's namespace.
x:Class="DictionaryApp.PageDictionary"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="using:DictionaryApp"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:ms="using:DictionaryApp.Model"
mc:Ignorable="d">
<UserControl.Resources>
<ms:VisiableConverter x:Key="VisiableConverter"></ms:VisiableConverter>
</UserControl.Resources>I think the not implemented exceptions could be causing the issue. I would implement this functions also
public object Convert(object value, Type targetType, object parameter, string language)
throw new NotImplementedException();
and
public object ConvertBack(object value, Type targetType, object parameter, string language)
throw new NotImplementedException(); -
An error has occurred: The plugin -65221 does not exist in the CMS
Hi,
I already raised this issue before and I thought this is already fixed. Everytime I upload this Crystal Report and try to schedule it using the RESCHEDULE window, I can't change the parameters. Everytime I click on the value of each parameter, the following error displays:
"An error has occurred: The plugin -65221 does not exist in the CMS"
What can be the cause of this and how can I resolve this? We are using Business Objects XI R2 with SP2 and Crystal Reports XI.
Thanks.Hello Neozeke,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk -
SDKException$PluginNotFoundAtCMS: The plugin Enterprise does not exist in the CMS
Post Author: NorfolkNChance
CA Forum: JAVA
Hi, I am trying for the first time to integrate my crystal reports into java J2ee.
I have been following the tutorials on http://devlibrary.businessobjects.com/BusinessObjectsXIR2/en/en/BOE_SDK/boesdk_java_dg_doc/doc/boesdk_java_dg/HowToExamples3.html
and think I am doing allright. I have imported all the jar I should do from the BO installation directories.
so I am running this code below:
String cms = "*********:6400"; String username = "administrator"; String password = "*********"; String auth = "Enterprise";
// Attempt logon. Create an Enterprise session
try { // manager object. ISessionMgr sm = CrystalEnterprise.getSessionMgr();
// Log on to BusinessObjects Enterprise IEnterpriseSession enterpriseSession = sm.logon(username, password, cms, auth); System.out.println("ddd"); } catch (SDKException e) { // TODO Auto-generated catch block e.printStackTrace(); }
When it reaches the line in bold it throws an exception:
[09/10/07 12:16:14:738 BST] 00000032 SystemErr R com.crystaldecisions.sdk.exception.SDKException$PluginNotFoundAtCMS: The plugin Enterprise does not exist in the CMS
cause:com.crystaldecisions.enterprise.ocaframework.idl.OCA.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
detail:The plugin Enterprise does not exist in the CMS
The exception originally thrown was com.crystaldecisions.enterprise.ocaframework.idl.OCA.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
is someone able to help me with this expection? Do I need to set something up on the sever?Post Author: Ted Ueda
CA Forum: JAVA
String auth = "secEnterprise";Sincerely,Ted Ueda -
Error: The plugin -65221 does not exist in the CMS
Hi,
I uploaded my Crystal Reports in the Business Objects InfoView. I can schedule them using the Schedule link but when I use the Reschedule link in the History and click on the paramater value, I' getting the following error:
An error has occurred: The plugin -65221 does not exist in the CMS
Did I miss a configuration? The source of the Crystal Report is a direct connection to the Oracle database. I also configured the Username and Password connection in the Business View tool.
Thanks!Hi,
I am not sure but I assume that the error has to do with the business views. Some component was not available in your repository and it was created when you imported the report using the CR Designer.
It may also be the case that this error has been corrected in a newer service pack (SP5 is the latest SP for BOBJ XI R2) To be honest I could not match your case to any of the the corrections contained in SP4 and SP5 but this does not mean that the issue is not corrected.
Regards,
Stratos
Maybe you are looking for
-
Anyobe ever hook their ibook up to a widescreen lcd hdtv/monitor?
i just got a sharp aquos 32" hdtv monitor. i have a s-video output cable for my ibook and i want to hook it up to the tv. i know it won't display 720/1080 but will it look good? will my ibook display a resolution suitable for a 32" widescreen as if i
-
Using ink and slide on Adobe sketch on portrait mode
how do you use it on portrait mode? the stylus moves up and to the left. CAn can this be fixed?
-
MW not showing Internet Expenses pre-upgrade tasks
User logins to MW, Selects project from "Select Role" "Engineer", Select category "Prep for Upgrade" from Process Steps. An assigned task/step for that user does not appear. For this particular user it is Category=Prep for Upgrade, Prod Family=Financ
-
Planned delivery time in purchase agreement
Hello, When I create a material contract for a material master without an existing info record, the system leaves the field "planned delivery time" blank. When there is already an inforecord for the material, the system copies the planned delivery ti
-
A low-level exception occurred in: ImporterFastMPEG (Importer)
Hi Guys, I received the following while trying to import a .ts file, both in Premiere Pro CS6 and the Media Encoder CS6. "A low-level exception occurred in: ImporterFastMPEG (Importer)" Any help appreciated. Trev Daley.