Objects in Table Spaces

Hi all,
I want to find which are all objects present in which tablespace, how to find this?
-GK

Seelct Administration>Tablespaces in the Enterprise Manager.

Similar Messages

Table space not getting cleaned after using free method (permanent delete)

Hi ,
We are using the free method of the LIB OBJ, to permanently delete the objects. As per documentation, the ContentGarbageCollectionAgent will be cleaning the database which runs in a scheduled mode. But the log of that ContentGargabageCollectionAsgent shows, all zero for objects without reference, objects cleared,etc. I.e the table space remains the same before and after deleteing all the contents in the cmsdk database. But the agent is running as per the schedule but just comes out doing nothing.
Can anbody put some light on this issue.
thanks
Raj.

Hi Matt,
Thanks for replying. It's been a very long time waiting for you ;)
---"Are you running the 9.2.0.1, 9.2.0.2, or 9.2.0.3 version of the Database?"
we are using 9.2.0.1
---"If you installed the CM SDK schema in the "users" tablespace ......."
Yes we are using USERS tablespace for our Development.
I ran the query. The result is:
SYSTEM MANUAL NOT AFFECTED
USERS MANUAL NOT AFFECTED
CTXSYS_DATA MANUAL NOT AFFECTED
CMSDK1_DATA MANUAL NOT AFFECTED
(USERS belongs to develpoment cmsdk schema. And CMSDK1 for Prod CMSDK schema)
From the results I see only "Manual", but still I don't see the tablespace size being coming down. Both table space sizes (USER and CMSDK1) always grows higher and higher.
Also to let you know, We use ORACLE EM Console (Standalone) application to see the oracle databse information online. Will there be any thing to do with the tool we use to see the table space sizes. We make sure we always refresh it before making a note.
So is there anything else I can see. Once I saw the ContentGarbageCollection agent to free 1025 objects and deleted 0 objects. But I don't see any change in the table space size. I am little confused b/w freed and deleted.
thanks once again for your response Matt.
-Raj.

What is difference between table space and shchema

what is difference between table space and shchema ?

784633 wrote:
so each user has it own space of tables - schema ?yes, but let's clarify a bit ....
The "schema" is the collection of all objects owned by a particular user. So if user SCOTT creates two tables, EMP and DEPT, and a view EMP_RPT, and a procedure GET_MY_EMP, those objects (tables, views, procedures) collectively make up the SCOTT schema.
Those objects will be physically stored in a tablespace.
A tablespace is a named collection of data files. So tablespace USERS will be made up of one or more data files. A specific datafile can belong to one and only one tablespace. If a tablespace has more than one data file, oracle will manage those files as a collection invisible to the application - much like the OS or disk subsystem handles striping across multiple physical disks.
A specific object in the SCOTT schema can exist in only one tablespace, but not all objects of the schema have to be in the same tablespace. Likewise a tablespace can contain objects from multiple schemas.
and can one user to access tables of other users?As others have said - FRED can access tables belonging to SCOTT as long has SCOTT has granted that access to FRED.

Space in bytes used by a single index in given table space

Hi All,
How can i find a table space used by index in bytes
Eg:
suppose i have a table space USERS and i have a table say customer . one index defined on table customer called CUSTOMER_UQ and mapped to table to table space USERS . How can i find the bytes used by object CUSTOMER_UQ in table space USERS.
Thanks

The used space in Karthik's example is the number of bytes actually used by entries in the index, not the amount of space allocated to the index itself.
To find out how much space in disk is allocated to the index you can use (as the owner of the index) something like:
SELECT bytes FROM user_segments
WHERE segment_name = <index name>You could also use all_segments or dba_segments if you have access as another user, but you would also need to specify the owner name.
John

Table space not reduce after delete in oracle 10g

Hi..
Based on my system, i have found that my oracle table space did not reduce after the deletion query. Why ?.. Could somebody help me. As your info, I am using oracle 10g.
Thank you,
Baharin

After Delete the table space will not be set free. high water mark will not be reset. to regain the space you need to recognize the objects from which you deleted the data. This can be done in many ways.
1) Move the objects.
Alter table temp move --> optionally tablespace clause can be used. After this you need to rebuild table indexes.
2) With 10g table can be shrinked or reorganize to free the space.
alter table mytable enable row movement;
alter table mytable shrink space;
3) Export/Import
export the objects and drop and recreate with import.

Table space not reused after deletion ?

Hi..
I am running on oracle 10g. Based on my system, i have created one query to delete old data from the table on daily basis. Below the sample query :-
delete from SNP_EXP_TXT
where I_TXT in (select I_TXT_SESS_MESS from SNP_SESSION
where SESS_END < trunc(SYSDATE - 1));
I have check on the database and all the old data are deleted from the table. But, I am confused why the table space keep increasing even the old data has been deleted.
I am assume that the problem because of the table space cannot be reused after the deletion. Could somebody help me how could i verified that and how could i ensure that all the table space can be reused ?
Thank you,
Baharin

Is there only one table, or are there other objects in the tablespace ? Are you sure this is the table that is growing ?
select segment_name, segment_type, bytes from dba_segments where tablespace = 'XXX';
It will also depend on how the data is inserted ? If you insert append, then it will grow the table.

Impact Analysis: How to trace which objects and tables used in a report?

Impact Analysis: How to trace which Webi objects and tables used in a report?
Currently, our company have been using BO Webi as our ad-hoc and reporting tool for over a year now. Past several months, we've been pushing our power users to develop their own report, and started to notice that we loss track off which data (tables, columns, ... , BO objects) being used where and by whom. The BI team now spend more time tracing through reports manually, instead of designing Universe.
After consulted with our local SAP technical sale, they said the only solution is to buy BO's ETL (Data Integration) and
Metadata Management tool, which price starting from $300K per CPU. I suppose that is NOT the right solution; however, we have not found one yet. Some executives believe Cognos (now by IBM) would provide a better BI solution as we scale.
If anyone know, please provide (1) Impact Analysis method: How to trace which Webi objects and tables used in a report? and (2) Does Cognos provide better impact analysis method without a heavy spending?
Thank you very much,
Ed
Edited by: EdPC-SCB on Sep 8, 2009 3:56 PM

EdPC-SCB,
have you tried enabling auditing?
- Yes, audit log only shows user's activities which isn't useful for us. Please let us know any audit log that might be helpful .
For most of the servers listed in the CMC there is an "Audit" tab. I'd say if you have the disk space in your database for Auditor available, then if in doubt turn it on (at least for a while) to see if it exposes what you are seeking to find out --that'd be the quickest way. The documentation (xir2_bip_auditor_en.pdf) doesn't offer much in helping you to see a correlation between ticking on an Audit option in a Server and how it will populate in the Auditor DB -- most of us just hunt and peck until we get what we want. Once you have the good stuff in each of the Servers ticked on you'll be able to track down which report recieves which object. To help youself out initially, you should run every report that you can find so Auditor will get seeded.
thanks,
John

Oracle APPS schema copy with all privileges to new schema and table space

Hi all,
Here is scenario:
I have installed e-business suite in windows 2003 server for training environment using production (prod), single node and without vision (demo).
i have to create a new table space in e:\oracle\prodmanz with similar content as in proddata and create a new schema called manz with same privileges as APPS.
Kindly advice.
Manish Kumar Chudasama
email: [email protected] cc to [email protected]
Thanks in advance guys.

Hi Khalid,
Ideally when you execute sql 'create schema <schema_name>' then the logged in user is going to default owner of the schema and you should see that under 'object privileges' of that user.
The user will have 'create any' privileges which means the user has all the privileges on that schema.
if you want to check who is owner of the schema in the system, please check 'SCHEMAS' under views in SYS.
Regards,
Venkat N.

Data object/ internal table

hi gurus...
Will data object occupy memory space.?
Will internal table occupy memory space.?

hi
any thing
that is being declared by using
DATA:
will occupy memery and caleed data object
where as if u use TYPES
it only defines the defination but no memeory is allocated to it
Cheers
Snehi

Which table space need to be increased

Hi ,
If we have to upload heavy loads are there specific table spaces which need to be increased.
I can recollect only PSA table spaces , Appreciate if you can add your views.
Regards
Rahul Bindroo

Hi All,
I have doubt about the table spaces. Say we have table spaces for PSA and cubes and other objects.
Say there is a system where we are not loading data in DSO's so will there be any impact on table space for DSO. Do we need to extend that space as well if we are only loading in Cubes.
Appreciate your replies.
Regards
Rahul Bindroo

Alter Table Space Autoextend

Hi,
I got an Error like this
"ORA-01630 max # extents (string) reached in temp segment in tablespace string
Cause: A temporary segment tried to extend past MAXEXTENTS."
Is it possible to alter table space to Auto Extend in Oracle 8i With out Shutting down the
Database. What Exact Commands for this? Is this effect the performance of the database?
Please reply
With thanks Naseer

user13098327 wrote:
Hi,
I got an Error like this
"ORA-01630 max # extents (string) reached in temp segment in tablespace string
Cause: A temporary segment tried to extend past MAXEXTENTS."
Is it possible to alter table space to Auto Extend in Oracle 8i With out Shutting down the
Database. What Exact Commands for this? Is this effect the performance of the database?
Please reply
With thanks NaseerThe error you hit and your request is something different:
ORA-01630 - limitation of extents per object or per tablespace.
Tablespace autoextend - May be you mean datafile autoextend option.
Pls, specify.

When do i need to create table spaces ?

hi all,
i know that any database has one table space and one data file at first creation , but
when do i need to create another table space or data file ? do i need that when oracle tells me that there is no space anymore or what ?
thanks

newbi_egy wrote:
hi all,
i know that any database has one table space and one data file at first creation , but
when do i need to create another table space or data file ? do i need that when oracle tells me that there is no space anymore or what ? In oracle database, the concept of storage segregation is done by two ways, using the schema and using the tablespace. So assume that you have two applications . One is used for HR related work and another is used for Finance and both kind of data is stored in one single database only. So how would you maintain such requirement? There are two ways to do it. One, you make two different schemas for each of the application and call them, for example HR schema and Fin schema. Now, you can create objects related to each of the application in it's own schema and store it in may be a single tablespace, Users. But this is going to be a little problematic like what would happen if you have lost the data file of that tablespace? You would be losing the data related to both the applications. So the better option would be to use two different tablespaces and store the data related to each application in both of them.
Understand that tablespace is a logical structure only. The only thing that's physical is going to be those data files which are stored under the tablespace. So if you are just running out of space in a data file of a tablespace, you do not need to create another tablespace. Take it like this that if you are running out of space for your family in the house, you can either make a new house for them or you can even build a new floor for them. Which one would be easier to manage, the new floor since a lot of ground work is already done for you. And that's what is the case if you have run out of the space in the data file. For this,you can simply create a new datafile(building a new floor) or even extend the existing one(construct a new room in the same floor, if you have space) . But creating a new tablespace won't be something that you should be doing for the reason of space being exhausted IMO.
Aman....

How can I convert table object into table record format?

I need to write a store procedure to convert table object into table record. The stored procedure will have a table object IN and then pass the data into another stored procedure with a table record IN. Data passed in may contain more than one record in the table object. Is there any example I can take a look? Thanks.

I'm afraid it's a bit labourious but here's an example.
I think it's a good idea to work with SQL objects rather than PL/SQL nested tables.
SQL> CREATE OR REPLACE TYPE emp_t AS OBJECT
2      (eno NUMBER(4)
3      , ename VARCHAR2(10)
4      , job VARCHAR2(9)
5      , mgr NUMBER(4)
6      , hiredate DATE
7      , sal NUMBER(7,2)
8      , comm NUMBER(7,2)
9      , deptno NUMBER(2));
10 /
Type created.
SQL> CREATE OR REPLACE TYPE staff_nt AS TABLE OF emp_t
2 /
Type created.
SQL> Now we've got some Types let's use them. I've only implemented this as one public procedure but you can see the principles in action.
SQL> CREATE OR REPLACE PACKAGE emp_utils AS
2      TYPE EmpCurTyp IS REF CURSOR RETURN emp%ROWTYPE;
3      PROCEDURE pop_emp (p_emps in staff_nt);
4 END emp_utils;
5 /
Package created.
SQL> CREATE OR REPLACE PACKAGE BODY emp_utils AS
2      FUNCTION emp_obj_to_rows (p_emps IN staff_nt) RETURN EmpCurTyp IS
3          rc EmpCurTyp;
4      BEGIN
5          OPEN rc FOR SELECT * FROM TABLE( CAST ( p_emps AS staff_nt ));
6          RETURN rc;
7      END emp_obj_to_rows;
8      PROCEDURE pop_emp (p_emps in staff_nt) is
9          e_rec emp%ROWTYPE;
10          l_emps EmpCurTyp;
11      BEGIN
12          l_emps := emp_obj_to_rows(p_emps);
13          FETCH l_emps INTO e_rec;
14          LOOP
15              EXIT WHEN l_emps%NOTFOUND;
16              INSERT INTO emp VALUES e_rec;
17              FETCH l_emps INTO e_rec;
18          END LOOP;
19          CLOSE l_emps;
20      END pop_emp;
21 END;
22 /
Package body created.
SQL>Looks good. Let's see it in action...
SQL> DECLARE
2      newbies staff_nt := staff_nt();
3 BEGIN
4      newbies.extend(2);
5      newbies(1) := emp_t(7777, 'APC', 'CODER', 7902, sysdate, 1700, null, 40);
6      newbies(2) := emp_t(7778, 'J RANDOM', 'HACKER', 7902, sysdate, 1800, null, 40);
7      emp_utils.pop_emp(newbies);
8 END;
9 /
PL/SQL procedure successfully completed.
SQL> SELECT * FROM emp WHERE deptno = 40
2 /
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM
    DEPTNO
      7777 APC        CODER           7902 17-NOV-05       1700
        40
      7778 J RANDOM   HACKER          7902 17-NOV-05       1800
        40
SQL>     Cheers, APC

Printing out results in case of object-relational table (Oracle)

I have made a table with this structure:
CREATE OR REPLACE TYPE Boat AS OBJECT(
Name varchar2(30),
Ident number,
CREATE OR REPLACE TYPE Type_boats AS TABLE OF Boat;
CREATE TABLE HOUSE(
Name varchar2(40),
MB Type_boats)
NESTED TABLE MB store as P_Boat;
INSERT INTO House VALUES ('Name',Type_boats(Boat('Boat1', 1)));
I am using java to print out all the results by calling a procedure.
CREATE OR REPLACE package House_boats
PROCEDURE add(everything works here)
PROCEDURE results_view;
END House_boats;
CREATE OR REPLACE Package.body House_boats AS
PROCEDURE add(everything works here) AS LANGUAGE JAVA
Name House_boats.add(...)
PROCEDURE results_view AS LANGUAGE JAVA
Name House_boats.resuts_view();
END House_boats;
However, I am not able to get Results.view working in case of object-relation table. This is how I do it in the situation of relational table.
CALL House_boats.results_view();
House_boats.java file which is loaded using LOADJAVA:
import java.sql.*;
import java io.*;
public class House_boats {
public static void results_view ()
   throws SQLException
   { String sql =
   "SELECT * from House";
   try { Connection conn = DriverManager.getConnection
("jdbc:default:connection:");
   PreparedStatement pstmt = conn.prepareStatement(sql);
   ResultSet rset = pstmt.executeQuery();
printResults(rset);
rset.close();
pstmt.close();
   catch (SQLException e) {System.err.println(e.getMessage());
static void printResults (ResultSet rset)
   throws SQLException { String buffer = "";
   try { ResultSetMetaData meta = rset.getMetaData();
   int cols = meta.getColumnCount(), rows = 0;
   for (int i = 1; i <= cols; i++)
   int size = meta.getPrecision(i);
   String label = meta.getColumnLabel(i);
   if (label.length() > size) size = label.length();
   while (label.length() < size) label += " ";
buffer = buffer + label + " "; }
buffer = buffer + "\n";
   while (rset.next()) {
rows++;
   for (int i = 1; i <= cols; i++) {
   int size = meta.getPrecision(i);
   String label = meta.getColumnLabel(i);
   String value = rset.getString(i);
   if (label.length() > size) size = label.length();
   while (value.length() < size) value += " ";
buffer = buffer + value + " "; }
buffer = buffer + "\n";   }
   if (rows == 0) buffer = "No data found!\n";
   System.out.println(buffer); }
   catch (SQLException e) {System.err.println(e.getMessage());} }
How do I print out the results correctly in my case of situation?
Thank you in advance

I have made a table with this structure:
I am using java to print out all the results by calling a procedure.
However, I am not able to get Results.view working in case of object-relation table. This is how I do it in the situation of relational table.
How do I print out the results correctly in my case of situation?
There are several things wrong with your code and methodology
1. The code you posted won't even compile because there are several syntax issues.
2. You are trying to use/test Java in the database BEFORE you get the code working outside the DB
3. Your code is not using collections in JDBC properly
I suggest that you use a different, proven approach to developing Java code for use in the DB
1. Use SIMPLE examples and then build on them. In this case that means don't add collections to the example until ALL other aspects of the app work properly.
2. Create and test the Java code OUTSIDE of the database. It is MUCH easier to work outside the database and there are many more tools to help you (e.g. NetBeans, debuggers, DBMS_OUTPUT windows, etc). Trying to debug Java code after you have already loaded it into the DB is too difficult. I'm not aware of anyone, even at the expert level, that develops that way.
3. When using complex functionality like collections first read the Oracle documentation (JDBC Developer Guide and Java Developer's Guide). Those docs have examples that are known to work.
http://docs.oracle.com/cd/B28359_01/java.111/b31225/chfive.htm
http://docs.oracle.com/cd/E11882_01/java.112/e16548/oraarr.htm#sthref583
The main issue with your example is #3 above; you are not using collections properly:
String value = rset.getString(i);
A collection is NOT a string so why would you expect that to work for a nested table?
A collection needs to be treated like a collection. You can even treat the collection as a separate result set. Create your code outside the database and use the debugger in NetBeans (or other) on this replacement code for your 'printResults' method:
static void printResults (ResultSet rset) throws SQLException {
    try {
       ResultSetMetaData meta = rset.getMetaData();
       while (rset.next()) {
           ResultSet rs = rset.getArray(2).getResultSet();
           rs.next();
           String ndx = rs.getString(1);
           Struct struct = (Struct) rs.getObject(2);
           System.out.println(struct.getSQLTypeName());
           Object [] oa = struct.getAttributes();
           for (int j = 0; j < oa.length; j++) {
              System.out.println(oa[j]);
    } catch (SQLException e) {
       System.err.println(e.getMessage());
That code ONLY deals with column 2 which is the nested table. It gets that collection as a new resultset ('rs'). Then it gets the contents of that nested table as an array of objects and prints out the attributes of those objects so you can see them.
Step through the above code in a debugger so you can SEE what is happening. NetBeans also lets you enter expressions such as 'rs' in an evaluation window so you can dynamically try the different methods to see what they do for you.
Until you get you code working outside the database don't even bother trying to load it into the DB and create a Java stored procedure.
Since your current issue has nothing to do with this forum I suggest that you mark this thread ANSWERED and repost it in the JDBC forum if you need further help with this issue.
https://forums.oracle.com/community/developer/english/java/database_connectivity
When you repost you can include a link to this current thread if you want. Once your Java code is actually working then try the Java Stored procedure examples in the Java Developer's Guide doc linked above.
At the point you have any issues that relate to Java stored procedures then you should post them in the SQL and PL/SQL forum
https://forums.oracle.com/community/developer/english/oracle_database/sql_and_pl_sql

BRtools table space creation error

hi,
Iam trying to create new table space in my R/3 system. When i went to brtools - space management sytem throwing error owner failed.I tried with all users to login like ( <SID>adm,administrator etc ...)even then same problem.Could you please suggest how to create table space with what login id
Error:
Main options for creation of tablespace in database WA6
1 - Tablespace name (tablespace) ......... [PSAPECDATA]
2 - Tablespace contents (contents) ....... [data]
3 - Segment space management (space) ..... [auto]
4 - SAP owner of tablespace (owner) ...... [EC5ADM]
5 - Data type in tablespace (data) ....... [both]
6 # Joined index/table tablespace (join) . []
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
c
BR0280I BRSPACE time stamp: 2006-06-14 21.08.45
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR0824E Owner EC5ADM not found in database or not SAP owner
BR0691E Checking input value for 'owner' failed
BR0669I Cannot continue due to previous warnings or errors - you can go back to
repeat the last action
BR0280I BRSPACE time stamp: 2006-06-14 21.08.45
BR0671I Enter 'b[ack]' to go back, 's[top]' to abort:
Please suggest.
- Cheers

Login as ora<sid> and run brtools. Tablespace owner will be SAP<SID> or SAPR3 depends upon your version.
Thanks
Prince

Objects in Table Spaces

Similar Messages

Maybe you are looking for