OC4J Configuration Issue While Starting the Database.
Hi,
Simply rename the the directories to lowe case. It works...
Edited by: Junaid on Oct 4, 2012 2:28 AM
Mode of file system on your OS has changed to read-only.
ORA-09969: unable to close or remove lock file
Linux-x86_64 Error: 30: Read-only file system
The above error can be because of your partition where lock file for instance is kept is changed into read only mode.
You can do the following.
1. Check if on the instance shutdown operation is pending .
2. Check which mount points are changed to read only mode.
3. As you system admin to Remount the same in read write mode or you can try this cmd as root user (mount -o remount,rw <device driver> <partition name>. Eg:- mount -o remount,rw /dev/sdb5 /oracle).
4 .Let the database to get shutdown
5. after this startup again
Similar Messages
-
Issue While starting the Oracle Database
Dear All,
I am getting the below error while starting the database:
We are using VMware and the database version is 11.2.0.3
$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Thu Oct 24 10:21:10 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup nomount
ORA-10997: another startup/shutdown operation of this instance inprogress
ORA-09969: unable to close or remove lock file
Linux-x86_64 Error: 30: Read-only file system
ORA-09925: Unable to create audit trail file
Linux-x86_64 Error: 30: Read-only file system
Additional information: 9925
SQL>
Please let me know how to go forward ?..
Is this issue related to Oracle or OS VMware ?..
Regards,
MaheshMode of file system on your OS has changed to read-only.
ORA-09969: unable to close or remove lock file
Linux-x86_64 Error: 30: Read-only file system
The above error can be because of your partition where lock file for instance is kept is changed into read only mode.
You can do the following.
1. Check if on the instance shutdown operation is pending .
2. Check which mount points are changed to read only mode.
3. As you system admin to Remount the same in read write mode or you can try this cmd as root user (mount -o remount,rw <device driver> <partition name>. Eg:- mount -o remount,rw /dev/sdb5 /oracle).
4 .Let the database to get shutdown
5. after this startup again -
Error while starting the Database
Hi,
I am getting the following error while starting the Database instance.
ORA-03113: end-of-file on communication channel.
How to fix this issue? i tried some of the options mentioned in docs in metalink. But still i am not able to fix.
Anypointers on this is appreciated.
Thanks & Regards,
SrikanthCan you paste lines from alertlog file..
-
Error while starting the database in asm
Hi,
I am getting an error while at the time of starting the instance in asm enviornment.
ORA-00202: control file: '+DG_GROUP1/poldev01/controlfile/current.260.743010027'
ORA-17503: ksfdopn:2 Failed to open file +DG_GROUP1/poldev01/controlfile/current.260.743010027
ORA-15001: diskgroup "DG_GROUP1" does not exist or is not mounted
ORA-15055: unable to connect to ASM instance
ORA-01031: insufficient privileges
Kindly help.Hi,
Can you check with the Permissions
ORA-15055: unable to connect to ASM instanceORA-01031: insufficient privileges>
Anand -
Issue while starting the flex application
I have an app that has been working for over 4 months now, but it started giving me this strange error starting this morning. It doesn't even start the app. Pls let me know if you have any suggestions.
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at mx.controls::AdvancedDataGridBaseEx/http://www.adobe.com/2006/flex/mx/internal::getHeaderInfo()[C:\work\flex\dmv_automation\pr ojects\datavisualisation\src\mx\controls\AdvancedDataGridBaseEx.as:2366]
at mx.controls::AdvancedDataGrid/http://www.adobe.com/2006/flex/mx/internal::getHeaderInfo()[C:\work\flex\dmv_automation\pr ojects\datavisualisation\src\mx\controls\AdvancedDataGrid.as:2147]
at mx.controls::AdvancedDataGrid/getFieldSortInfo()[C:\work\flex\dmv_automation\projects\dat avisualisation\src\mx\controls\AdvancedDataGrid.as:6840]
at mx.controls.advancedDataGridClasses::AdvancedDataGridHeaderRenderer/getFieldSortInfo()[C: \work\flex\dmv_automation\projects\datavisualisation\src\mx\controls\advancedDataGridClass es\AdvancedDataGridHeaderRenderer.as:757]
at mx.controls.advancedDataGridClasses::AdvancedDataGridHeaderRenderer/measure()[C:\work\fle x\dmv_automation\projects\datavisualisation\src\mx\controls\advancedDataGridClasses\Advanc edDataGridHeaderRenderer.as:481]
at mx.core::UIComponent/measureSizes()[C:\autobuild\3.2.0\frameworks\projects\framework\src\ mx\core\UIComponent.as:5956]
at mx.core::UIComponent/validateSize()[C:\autobuild\3.2.0\frameworks\projects\framework\src\ mx\core\UIComponent.as:5902]
at mx.managers::LayoutManager/validateClient()[C:\autobuild\3.2.0\frameworks\projects\framew ork\src\mx\managers\LayoutManager.as:837]
at mx.controls::AdvancedDataGridBaseEx/calculateHeaderHeight()[C:\work\flex\dmv_automation\p rojects\datavisualisation\src\mx\controls\AdvancedDataGridBaseEx.as:2249]
at mx.controls::AdvancedDataGrid/calculateHeaderHeight()[C:\work\flex\dmv_automation\project s\datavisualisation\src\mx\controls\AdvancedDataGrid.as:3141]
at mx.controls::AdvancedDataGridBaseEx/makeRowsAndColumns()[C:\work\flex\dmv_automation\proj ects\datavisualisation\src\mx\controls\AdvancedDataGridBaseEx.as:1915]
at mx.controls::AdvancedDataGrid/makeRowsAndColumns()[C:\work\flex\dmv_automation\projects\d atavisualisation\src\mx\controls\AdvancedDataGrid.as:7169]
at mx.controls.listClasses::AdvancedListBase/updateDisplayList()[C:\work\flex\dmv_automation \projects\datavisualisation\src\mx\controls\listClasses\AdvancedListBase.as:3504]
at mx.controls::AdvancedDataGridBaseEx/updateDisplayList()[C:\work\flex\dmv_automation\proje cts\datavisualisation\src\mx\controls\AdvancedDataGridBaseEx.as:1778]
at mx.controls::AdvancedDataGrid/updateDisplayList()[C:\work\flex\dmv_automation\projects\da tavisualisation\src\mx\controls\AdvancedDataGrid.as:6007]
at mx.controls.listClasses::AdvancedListBase/validateDisplayList()[C:\work\flex\dmv_automati on\projects\datavisualisation\src\mx\controls\listClasses\AdvancedListBase.as:3072]
at mx.managers::LayoutManager/validateDisplayList()[C:\autobuild\3.2.0\frameworks\projects\f ramework\src\mx\managers\LayoutManager.as:622]
at mx.managers::LayoutManager/doPhasedInstantiation()[C:\autobuild\3.2.0\frameworks\projects \framework\src\mx\managers\LayoutManager.as:677]
at Function/http://adobe.com/AS3/2006/builtin::apply()
at mx.core::UIComponent/callLaterDispatcher2()[C:\autobuild\3.2.0\frameworks\projects\framew ork\src\mx\core\UIComponent.as:8628]
at mx.core::UIComponent/callLaterDispatcher()[C:\autobuild\3.2.0\frameworks\projects\framewo rk\src\mx\core\UIComponent.as:8568]Maybe it is a timing issue you didn't see before.
Check for areas of the app that might be dependent on other areas of the app being in a certain state, or dependent on data existing.
Or try to boil your case donw to simplified code and post here. -
CompatibilityRealm issues while starting the weblogic server.
Hi,
This is the error I am getting when I try to bring up the weblogic portal. The version is weblogic 7.0 SP7
Can anyone pls suggest here?
Starting WebLogic Server...
<Mar 28, 2006 3:31:05 PM CST> <Notice> <Management> <140005> <Loading configurat
ion /apps/slfc/bea7/portalDomain/./config.xml>
Failed to initialize default security realm: CompatibilityRealm
<Mar 28, 2006 3:31:10 PM CST> <Critical> <WebLogicServer> <000364> <Server failed during initialization. Exception:weblogic.security.service.SecurityServiceRuntimeException: Failed to initialize default security realm CompatibilityRealm for unknown reasons
weblogic.security.service.SecurityServiceRuntimeException: Failed to initialize default security realm CompatibilityRealm for unknown reasons
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManagerDelegateImpl.java:761)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDelegateImpl.java:530)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:922)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:719)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:593)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:281)
at weblogic.Server.main(Server.java:32)
>
<Mar 28, 2006 3:31:10 PM CST> <Emergency> <WebLogicServer> <000342> <Unable to initialize the server: Fatal initialization exception
Throwable: weblogic.security.service.SecurityServiceRuntimeException: Failed to initialize default security realm CompatibilityRealm for unknown reasons
weblogic.security.service.SecurityServiceRuntimeException: Failed to initialize default security realm CompatibilityRealm for unknown reasons
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManagerDelegateImpl.java:761)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDelegateImpl.java:530)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:922)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:719)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:593)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:281)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised:
weblogic.security.service.SecurityServiceRuntimeException: Failed to initialize default security realm CompatibilityRealm for unknown reasons
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManagerDelegateImpl.java:761)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDelegateImpl.java:530)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:922)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:719)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:593)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:281)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: weblogic.security.service.SecurityServiceRuntimeException: Failed to initialize default security realm CompatibilityRealm for unknown reasons
weblogic.security.service.SecurityServiceRuntimeException: Failed to initialize default security realm CompatibilityRealm for unknown reasons
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManagerDelegateImpl.java:761)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDelegateImpl.java:530)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:922)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:719)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:593)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:281)
at weblogic.Server.main(Server.java:32)
Thanx
NitinMost of the time this error is coming from a wrong psservername parameter definition in configuration.properties of your Webserver. Be sure you can ping the servername or IP address defined, and the port is the Jolt port of the AppServer domain.
Please, show us what's the value. And also your PTools, Weblogic, Tuxedo version and OS used.
Nicolas. -
Error on MBAM Clients while start the encryption
Hi,
I am getting multiple issue while start the encryption through MBAM Client.
Currently I am getting below to logs on MBAM clients
1.
Log Name: Microsoft-Windows-MBAM/Admin
Source: Microsoft-Windows-MBAM
Date: 02-04-2014 19:09:24
Event ID: 4
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: KLL1Z5G1N1.KALPATARUGROUP.COM
Description:
An error occurred while sending encryption status data.
Error code:
0x803D0005
Details:
Access was denied by the remote endpoint.
2nd Log
Log Name: Microsoft-Windows-MBAM/Admin
Source: Microsoft-Windows-MBAM
Date: 02-04-2014 19:09:20
Event ID: 2
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: KLL1Z5G1N1.KALPATARUGROUP.COM
Description:
An error occured while applying MBAM policies.
Volume ID:\\?\Volume{be9de23e-877c-11e3-8267-806e6f6e6963}\
Error code:
0x803D0005
Details:
Access was denied by the remote endpoint.
to resolve this issue I have done the below but still issue is here.can anyone suggest for right solutions for this ?
1. On MBAM server I have done below
DWORD (32-Bit) value with name as "DisableMachineVerification" and change the value data to 1.
Restart the MBAM Server.
2. on MBAM server I am not getting any application logs.
3. MBAM Recovery and Hardware service endpoint and MBAM Status reporting service endpoint is configured with GP properly and it is working while opening through Browser.
MBAM Recovery and Hardware service endpoint :-http://bos01.kugroup.com:8080/MBAMRecoveryAndHardwareService/CoreService.svc (where bos01.kugroup.com is FQDN of
Administration and Monitoring Server Name)
MBAM Status reporting service endpoint:-
http://bos01.kugroup.com:8080/MBAMComplianceStatusService/StatusReportingService.svc (where bos01.kugroup.com is FQDN of Administration and Monitoring Server Name)
4. GP applied successfully..
I need to resolve this issue quickly can some guide me ? MBAM Monitoring and self-service components is on one server and other DB components are on other server.
thanks..shailendra
Shailendra DevI am attaching the Group Policy applied .
Shailendra Dev -
Problem occured while starting the Manged server of weblogic9.2
Hi all,
I am cnfiguring the OWSM on 2 machine which are in Clustering mode(Pre-Prod Env)
I have done the installation of SOA SUITE10.1.3.1 for the same.
After installation , i started Admin server.
But i am facing issue while starting the managed server of weblogic9.2 through admin Server Console.(which are clustered).The managed Server state goes to ADMIN and raise the error that failed to start the server.It does not go into RUNNING state.
The error i was recieved is :
*####<May 13, 2009 10:21:01 AM IST> <Info> <ServletContext-/bea_wls_internal> <ggneai65> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1242190261158> <000000> <HTTPClntLogin: Login rejected with code: 'Failed', reason: java.net.ProtocolException: HTTP tunneling is disabled*
* at weblogic.rjvm.http.HTTPServerJVMConnection.acceptJVMConnection(HTTPServerJVMConnection.java:88)*
* at weblogic.rjvm.http.TunnelLoginServlet.service(TunnelLoginServlet.java:80)*
* at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)*
* at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)*
* at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)*
* at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)*
* at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)*
* at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3244)*
* at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)*
* at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)*
* at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)*
* at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)*
* at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)*
* at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)*
* at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)*
*'>*
because of which deployment of OWSM failed at managed server.
please help me for the same ASAP.
its urgent.
Regards
GauravThat is an INFO message you received and would not stop a managed server from starting. To get rid of that INFO message, enable tunneling on the admin server.
Check your node manager log file to see why the managed server is not starting. -
Database Alert Macros issue while executing the macros in Background
Hi All,
I am facing some problems while executing the Database alert macros in Background/Process Chain.
There are two macros for which the problem exists.
1.Excess Projected Inventory above Max
The logic here is, the alert should work for Only Fixed Lot size Procedure.
If the Stock on hand (projected EA) > (Safety Stock (EA) + Full SOQ (EA)) then alert = "Projected inventory is XX% above MAX".
XX is the Percent above Max.
Note: SOQ => fixed lot size.
2.Excess Actual Days of Supply
The Logic here is, the alert should work for all Lot size Procedures except for "Fixed lot size".
Actual Days Supply >=180 days. (current -> future buckets)
- For every receipt cell check the Actual Days Supply - if >= 180 days.
The macros are working perfectly as expected.Hi Abhi,
Hope you are doing good.
Yes exactly, the macros are working in foreground/Interactively but not in the Background via Process chain. Let me send the details again.
Issue :
I am facing some problems while executing the Database alert macros in Background/Process Chain.
There are two macros for which the problem exists.
1.Excess Projected Inventory above Max
The logic here is, the alert should work for Only Fixed Lot size Procedure. But in Background the alerts are getting created for Lot for Lot and other Planning procedures..
If the Stock on hand (projected EA) > (Safety Stock (EA) + Full SOQ (EA)) then alert = "Projected inventory is XX% above MAX".
XX is the Percent above Max.
Note: SOQ => fixed lot size.
2.Excess Actual Days of Supply
The Logic here is, the alert should work for all Lot size Procedures except for "Fixed lot size". But in Background the alerts are getting created for the Fixed Lot size procedures too..
Actual Days Supply >=180 days. (current -> future buckets)
- For every receipt cell check the Actual Days Supply - if >= 180 days.
The macros are working perfectly as expected in Foreground/Interactively but the samething is not happening while executing the macro in Background/Process Chain.
I have tried running these macros in different sequences(Default/Start/Macro) but couldn't able to resolve the issue.
Thanks in Advance,
Jay. -
Hello,
after analysing endlessly the existing workarounds for this problem, i conclude that mine is not posted yet.
Intro
In order to install EPM, i had to install Oracle Database 11g. After the installation, an error ocurred stating that configurations were not saved and i could run manually "ECMA.bat" later.
I tried to configure it by creating environment variables such as:
- ORACLE_SID
- ORACLE_HOSTNAME
- ORACLE_UNQNAME
So far, i haven't tried to executed ECMA.bat for the last time, since I am quite sure that i will fail due to not recognizing the hostname.
The issue
Whili trying to make sure that the database is correctly configured, i tried to access to the webpage, unsuccessfully.
Then i found my problem in the forums:
When i type in CMD:
--> (I type)
C:\OracleDB_app\alexandreyin\product\11.2.0\dbhome_1>emctl status dbconsole
--> (returns)
OC4J Configuration issue. C:\OracleDB_app\alexandreyin\product\11.2.0\dbhome_1/o
c4j/j2ee/OC4J_DBConsole_HPCM.lab.pt_orcl not found.
In fact there was no folder with that name, nor something like "/OC4J_DBConsole_localhost_orcl" as many posts suggests.
I only have folders like:
- "home"
- "oc4j_applications"
- "OC4J_DBConsole"
- "OC4J_Workflow_Component_Container"
- "OC4J_Workflow_Management_Container"
- "utilities"
- "deploy_db_wf"
Some posts suggests me to change my /driver/etc/host file, but i think my current file is correct:
--> (Content of host gile)
127.0.0.1 localhost
XX.XXX.XXX.XXX HPCM.lab.pt
Honestly, i am out of ideas and i wish any experienced colleague could give me a hint.
Thanks in advanceHi,
It is worth having a look at the following document on Oracle support.
Problem - emctl start dbconsole Fails with Error OC4J Configuration issue OC4J_DBConsole_<HOSTNAME>_<DBNAME> not found *[ID 555218.1]*
Linux 64bit DBConsole Fails With "OC4J Configuration issue cannot find /oc4j/j2ee/oc4j_DBConsole_..." *[ID 462325.1]*
Thanks,
HyperEPM -
Failed to run Task Sequence.
An error occurred while starting the task sequence (0x8007000E)."
While OSD, picks up task sequence but fails in resolving task sequence dependencies. SMSPXE identifies device is not in database (unknown).
SMSTS.log shows
ThreadToResolveAndExecuteTaskSequence failed. Code(0x8007000E)" in SMSTS.LOG, have seen other articles suggesting failure due to lack of storage (RAM) but this task sequence has worked in past.
By the way, if I create a stand alone media, we are able to image the workstation. What has changed in the task sequence such that the workstation is unable to download policies due to lack of storage (RAM) on workstation. Workstation has 2 GB of RAM.I have found a work around for the issue, even though the computer is unknown, there were software updates targeted to the ALL SYSTEMS collection which applies to All Unknown Computers and therefore to x64 Unknown Computer and x86 Unknown Computer.
We had a SCEP ADR applying definition updates to All Systems, we applied the ADR to a different collection, removed all the SCEP updates to All Systems and successfully re-imaged the workstation. Following article was of great help in identifying the problem
after-selecting-a-task-sequence-in-configuration-manager-2012-sp1-you-receive-threadtoresolveandexecutetasksequence-failed-code0x8007000e-in-smsts-log
Thanks Gerry for your assistance. -
Hi,
I tried to put my database in Archivelog mode through EM , at the time of restarting the database it didnt start... instance is starting but database is not opening....
I tried this command but its giving error... ( I am running 10g r2 , on RHEL 5 which is install on Oracle virtual toolbox )
emctl start dbconsole
OC4J Configuration issue. /opt/oracle/oraclehome_112/db_1/oc4j/j2ee/OC4J_DBConsole_myhostname_orcl not found.
where orcl is the instance name.
and this directory, OC4J_DBConsole_myhostname_orcl, does not exist on the file system.
In some article I read ... the solution I tried to type...
http://kamranagayev.com/2011/03/21/step-by-step-installing-oracle11g-on-linux/
Feedback no. 19
./emca -deconfig dbcontrol db -repos drop
bash : ./emca : No Such file or Directory
./emca -config dbcontrol db -repos create
Thanks and regards...Hello;
I'm thinking this step was either missed of you have a typo :
Change the entry of .bash_profile file of the oracle user and add following lines:
vi /home/oracle/.bash_profile
export ORACLE_HOME=/u01/home/oracle/product/11.2.0/db_1
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib
export PATH=$ORACLE_HOME/bin:$PATHIf your ORACLE_HOME is set it should find the "emca".
You can test by running these export commands at the Linux prompt.
The which command is your friend
which emca
/u01/app/oracle/product/11.2.0.2/bin/emcaBest Regards
mseberg
Edited by: mseberg on Feb 29, 2012 2:52 PM -
OC4J Configuration issue Oracle 11g R2 Windows XP and Windows 7
Hallo!I have installed Oracle Database 11.2.0.1.0 on both Windows XP and Windows 7 on 2 different machines.
Before installing on both OSs,I had installed Microsoft Loopback Adapter and had set hostname as JOEY-PC and IP address 192.168.0.X.Once the installations were complete and I restarted the machines,I could not start OEM and the error below appears
C:\Documents and Settings\JOEY>emctl start dbconsole
OC4J Configuration issue. C:\app\JOEY\product\11.2.0\dbhome_1/oc4j/j2ee/OC4J_DBConsole_JOEY-PC_orcl not found.
When I went to the C:\app\JOEY\product\11.2.0\dbhome_1\oc4j\j2ee directory,I found the folder OC4J_DBConsole_localhost_orcl instead of OC4J_DBConsole_JOEY-PC_orcl.
I assumed that by using Microsoft Loopback Adapter,I would avoid the error above and that the OC4J_DBConsole folder would permanently remain as OC4J_DBConsole_JOEY-PC_orcl instead of OC4J_DBConsole_localhost_orcl.
Why is this folder changing its name and how can I resolve this issue?
Thanks.Pl post the contents of the file C:\WINDOWS\System32\drivers\etc\hosts on both servers
What steps did you take to set the hostname to JOEY-PC ?
Srini -
The service name is invalid When starting the Database Control
Dear Oracle Expert,
I have installed Oracle database 11g on Windows Professional x64 Edition Version 2003 Service Pack 2..
When I try to start the Database control after renaming the IP_address to the local machine name which is robert. It prompts back with an error.
C:\>emctl status dbconsole
Environment variable ORACLE_SID not defined. Please define it.
C:\>set ORACLE_SID=ocp11g
C:\>emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://192.168.1.67:1158/em/console/aboutApplication
Oracle Enterprise Manager 11g is not running.
C:\>emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://192.168.1.67:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ...The service name is i
nvalid.
More help is available by typing NET HELPMSG 2185.
C:\>hostname
robert
C:\>emctl status dbconsole
OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
J_DBConsole_192.168.1.67_ocp11g not found.
C:\>set ORACLE_SID=ocp11g
C:\>emctl status dbconsole
OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
J_DBConsole_192.168.1.67_ocp11g not found.
C:\>emctl start dbconsole
OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
J_DBConsole_192.168.1.67_ocp11g not found.
C:\>SET ORACLE_HOME= C:\app\Administrator\product\11.1.0\db_1\oc4j\j2ee\OC4J_DBC
onsole_robert_ocp11g
C:\>set ORACLE_SID=ocp11g
C:\>emctl status dbconsole
OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
J_DBConsole_192.168.1.67_ocp11g not found.
C:\>emctl start dbconsole
OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
J_DBConsole_192.168.1.67_ocp11g not found.
C:\>
Thanks in advance.
RleeHello Oracle experts,
I have to managed to Configure the Database Control by configuring a Microsoft Network adapter on my laptop but
right now I can't access it within the URL.
Tests of the running Database control include:
C:\Documents and Settings\Administrator>emctl status dbconsole
Environment variable ORACLE_SID not defined. Please define it.
C:\Documents and Settings\Administrator>SET ORACLE_SID=ocp11
C:\Documents and Settings\Administrator>emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://robert:1158/em/console/aboutApplication
Oracle Enterprise Manager 11g is running.
Logs are generated in directory C:\app\Administrator\product\11.1.0\db_2/robert_
ocp11/sysman/log
C:\Documents and Settings\Administrator>
When I try to access the database control, I am un able to.
The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.
Please try the following:
If you typed the page address in the Address bar, make sure that it is spelled correctly.
Open the robert:1158 home page, and then look for links to the information you want.
Click the Back button to try another link.
Click Search to look for information on the Internet.
HTTP 404 - File not found
Internet Explorer
Is this something related to Internet Explorer.
Kindly rescue me out.
Regards,
RLee -
Error while starting the OIM managed server in oracle VM
Hi ,
I am getting the following error , while starting the OIM managed server in Oracle VM.
<Jun 14, 2012 4:45:38 AM EDT> <Error> <org.quartz.impl.jdbcjobstore.JobStoreCMT> <BEA-000000> <MisfireHandler: Error handling misfires: Unexpected runtime exception: null
org.quartz.JobPersistenceException: Unexpected runtime exception: null [See nested exception: java.lang.NullPointerException]
at org.quartz.impl.jdbcjobstore.JobStoreSupport.doRecoverMisfires(JobStoreSupport.java:3042)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.manage(JobStoreSupport.java:3789)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.run(JobStoreSupport.java:3809)
Caused By: java.lang.NullPointerException
at org.quartz.SimpleTrigger.computeNumTimesFiredBetween(SimpleTrigger.java:800)
at org.quartz.SimpleTrigger.updateAfterMisfire(SimpleTrigger.java:514)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.doUpdateOfMisfiredTrigger(JobStoreSupport.java:944)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.recoverMisfiredJobs(JobStoreSupport.java:898)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.doRecoverMisfires(JobStoreSupport.java:3029)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.manage(JobStoreSupport.java:3789)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.run(JobStoreSupport.java:3809)
>
How to resolve this issue.Any one please suggest me , i am in a big trouble ...
Thanks in advance ..
-Deena.Hi P.k,
The table QRTZ92_TRIGGERS is there in the database.But while trying to run this command (UPDATE QRTZ92_TRIGGERS set NEXT_FIRE_TIME=1 where NEXT_FIRE_TIME < 0)in database i am getting the table or view does not exist.
What is GTC resource?
OIM version - 11.1.1.5.0.
-Deena.
Maybe you are looking for
-
HT204053 how do i create a new icloud account
hi i have had problems with my icloud since i started as i couldnt get my email address and my apple id just to be the same from get go i started off with a mobile me account and now it has changed over to icloud completly i dont no how to change any
-
Told to re-install itunes. When I do, it tells me "This file cannot be read because it was created by a newer version of itunes." Therefore I can't re-install! Can't seem to find a way to get itunes back. This is a 8 yr old ipod shuffle...
-
New iMac G5. Is it ok?
I'm going to be getting a new iMac G5 2.0Ghz this week. I am ready the blogs about the imac and have a few worries about its visual stability. Please could I have some constructive adive about this machine. So I won't go make a mistake! I am updradin
-
Creative Cloud "installs" but is blank
I have Creative Cloud on my desktop computer and want to install the second license on my laptop. I spent an hour downloading CC to the laptop and installed it. The app launches but is empty. There is no preference option under the gear icon in the t
-
How can I parse a sql sentence like Oracle system do it ?
I want to parse a sql sentence like Oracle system do. for example: here is a sql as follow select * from scott.emp; I want to use some functions to get 'scott.emp' as result, how can I do ? Thanks.