OCI Catalog Punchout From MM/PM

Hello,
We are configuring an externally maintained OCI punchout catalog with the MM and PM modules within ECC. 
When adding items to the requisition in MM, and the work order in PM, none of the fields are fixed (non-changeable/editable).  I was expecting certain fields (e.g. Price, Material Group, Vendor, etc.) to be fixed  - similar to when punching out from an SRM system.
Shouldn't the applicable fields be non-editable?
Thanks,
Edgar

Hi Andreas,
For our customer we would like to link ECC5 MM to SRM-MDM 2.0.
Our MDM catalog works well with SRM EBP 5.5.
For a different scenario we would like to link MDM directly to ECC5 : MM / PM / PS.
1. In ECC5 MM there is no customizing entry for Web Services.
It used to be :
IMG --> Material Management --> Purchasing --> Environment Data --> Web Services.
This entry is no longer exist.
Do you have an idea of how to link MM to MDM ?
2. In order to link MDM to ECC5 PM, we customize :
IMG --> Plant Maint ... --> Maintenance and services ... --> Maintenance and services order --> Interface for procurement Using catalogs (OCI) --> define catalog
I did the same setting as in SRM EBP.
and also
IMG --> Plant Maint ... --> Maintenance and services ... --> Maintenance and services order --> Interface for procurement Using catalogs (OCI) --> Assign Catalog to Order type
I assign
PM01 order type,
a plant,
sequence 1
Catalog ID.
I have no idea about the following entry in this table :
- Organization
- User
- Password.
I put them with blank value.
Thanks for your help.
regards
XAvier NIEL

Similar Messages

  • Punchout from ECC 6.0 MM via OCI to MDM Catalog

    Hi Folks,
    my customer wants to integrate the SRM MDM Catalog with ECC 6.0/MM without using SRM or XI. I already found threads talking about external catalogs being linked from MM using
    ECC SPRO : Materials Management -> Purchasing -> Environment Data -> Web Services: ID and Description
    which I have available. However, I was expecting an entry for example in PM where I have the activities for OCI (Catalog ID, HTML-Fields etc.) in detail, but not a general web service ID an description. I am familiar with OCI, but not with web services.
    How can I use the web service ID to turn into a configurable OCI-interface?
    Thanks, Andy

    Hi Andreas,
    For our customer we would like to link ECC5 MM to SRM-MDM 2.0.
    Our MDM catalog works well with SRM EBP 5.5.
    For a different scenario we would like to link MDM directly to ECC5 : MM / PM / PS.
    1. In ECC5 MM there is no customizing entry for Web Services.
    It used to be :
    IMG --> Material Management --> Purchasing --> Environment Data --> Web Services.
    This entry is no longer exist.
    Do you have an idea of how to link MM to MDM ?
    2. In order to link MDM to ECC5 PM, we customize :
    IMG --> Plant Maint ... --> Maintenance and services ... --> Maintenance and services order --> Interface for procurement Using catalogs (OCI) --> define catalog
    I did the same setting as in SRM EBP.
    and also
    IMG --> Plant Maint ... --> Maintenance and services ... --> Maintenance and services order --> Interface for procurement Using catalogs (OCI) --> Assign Catalog to Order type
    I assign
    PM01 order type,
    a plant,
    sequence 1
    Catalog ID.
    I have no idea about the following entry in this table :
    - Organization
    - User
    - Password.
    I put them with blank value.
    Thanks for your help.
    regards
    XAvier NIEL

  • Access a OCI Catalog from ABAP code

    Hi Experts,
    We may need to access an OCI Catalog from an ABAP code. We will need to punch out the Catalog in a browser window, and somehow get the results from the browser back to the ABAP code.
    Any idea of how can this be accomplished?
    Thanks and regards,
    José Omar

    Accessing the catalog is nothing but creating a hook url and directing to that URL.
    For eg. you should have the parameters read from the SPRO settings in SRM and then creating an URL in the fly.
    But as of now you can have hard coded URLs being fed in.
    ie you click on a link and you fire the exit plug as in Web dynpro in suspend mode.
    The main criteria is to have the catalog OCI 4.0 complaint. (read mandatory fields etc in OCI 4.0 documentation)
    Then once you shop from some items in the catalog , the OCI compliant catalog will send you the data in the required file format.
    At the receiving end , PO etc . you should have a ABAP method (at resume ) that interprets this sent name-value pair file from the catalog. then populate this data where you want.
    you can have a look at the SRM methods that does the same in ABAP.
    This would the 20,000 feet or more process overview on how it works. Hope this helps
    thanks
    -Adrivit

  • OCI Catalog for Vendor problem : Logical system for catalog not maintained

    We have set up an OCI catalog with on of our vendors. This works fine untill we transfer shopping basket data from Vendor sysem into our SRM-system (SRM5.0). Then data is not being transfered and Vendor Webshop screen remains 'open'.
    in SLG1 i have found an error "Logical system for catalog not maintained. Inform system administrator'
    Anyone an idea what the cause of this error can be or what we need to check ?
    Thanks in advance

    Hi,
    I have not seen that error before. However, I think it may have to do with the LOGICAL_SYSTEM OCI field. Can you check if your punch-out catalog vendor is populating that field? Also, check if you have the correct BP# populated in the catalog configuration and the LOGICAL SYSTEM Field on the define External Webservices is blank.
    SG

  • OCI Catalog MM PO and PR

    Hi,
    Have integrated OCI catalog to be called in ME21N and ME51N.
    1.Only one catalog can be called unlike PM OCI inetgration were we can call multiple catalog.How do we call multiple catalog in ME21N and ME51N
    2.How can we map the catalog to a R/3 Vendor number so that I dont need to add vendor number manually after data is transfered from catalog to PO or PR.
    Regards

    Hi
    I just wanted first to know, how you implemented an OCI catalog function in ME51N or ME21N?
    I found two SAP notes which tells me that it is "A function is missing in the standard system."
    Check Notes
    1092922 - Using several catalogs in purchasing
    1092923 - Catalog connection in purchasing
    Really appreciate your answer
    BR, Markus

  • OCI Catalogs in MM

    Hi Guys,
    as we all know since ECC6.0 we can use OCI catalogs in MM.
    I now have a vendor who send me his OCI interface data. I customized the data. Everything is fine.
    But I now have additions wishes:
    1. Integration of multiple catalogs - only the default catalog is shown but there must be an opportunity to do this because it's mentioned in sap note 1092922 - has anybody done this before?
    2. Is there any chance to influence the data from OCI catalog via BAdI or Enhancement. The only BAdI i found is ME_CATALOG_INTERFACE which is not accesible because it's declared SAP internal
    3. How can i use the fields "NEW_ITEM-CUST_FIELD1" - "NEW_ITEM-CUST_FIELD5" can i define a mapping anywhere?
    4. Has anybody here ever written an costumer specific transaction using MM Catalog API? Please let me know how it was done.
    Thanks in advance!
    Regards,
    Christian

    about Q2:
    The BADI will be available to customers only from EHP4 on. The reason for that not being delivered to customer was that the     
    interface was not finalized and would be possibly changed.           
    If you want to implement it you may do it under own responsibility. In order to use this BADI, you need to execute transaction SE18 and select BADI ME_CATALOG_INTERFACE. You will need to uncheck checkbox 'within SAP' and save. Then you should be able to create your implementation via SE19. Or change the internal flag directly on database table SXS_ATTR                                                                               
    This is of course considered as a modification from the standard

  • OCI Catalog Limitations

    Dear SAP expert,
    Could you please share your experience on external / OCI catalog re- limitations in the SAP CRM E-Commerce area?
    Should we expect difficulties with integration & pricing? Will it restrict available functionalities and views in the B2C scenario?
    Thanks in advance,
    Regards, Stephanie

    OCI catalog integration with CRM Web Channel is fairly simple and works fine. CRM Web channel side of the OCI integration can be enhanced to include custom fields to be transferred from OCI catalog to Web Channel basket.
    The catalog item details and Pricing are the features of the external (OCI compliant) catalog you are using. So, you must check your external catalog for this
    The user interface and navigation - or how the user interacts with the catalog and orders items - is what might turn you off. Remember, the external catalog, as you know is technically another web application that is NOT web channel application. Inter web application integration is through OCI (hiitp or xml) protocol.
    1. Matching the styles of external catalog and your web channel application - might sound easy, but depends on the external catalog's capability to adapt to style changes.
    2. The navigation from one application (catalog) to the other (web channel) is NOT what you will like in today's slick UI-s. Two applications will be open when the user is browsing the catalog to select and "collect" the items in external catalog and then transfers the items to the web channel basket.
    Suggest you do a proof-of-concept and run the UI and navigation to the business users before you jump in.
    Also, explore if you can use the external catalog using web services.
    Easwar Ram
    http://www.parxlns.com

  • Can I import catalog photos from a usb drive?

    I have imported photos from a catalog into a new catalog.  Some of the photos in the catalog are located on a remote drive.   The drive is not listed when I select the photos to be imported.  Is it possible to import catalog photos from a usb drive?
    Howie

    Hi Keith,
    "Import from another catalog" is a selection found in the Lightroom "File" drop down listing. Sorry I wasn't clear in my reguest.   I have used this function to import photos in to my new Catalog from my old Catalog.  During the import process,  Lightroom creates a working catalog from which photos can be selected.     A file list on the left side of the window displays the available hard drive folders.   Once the photos to be extracted are selected the source folder is checked.  The import button, on the bottom right of the window, is highlited to execute the import function.  Since the external USB hard drive is not listed,  the import function is not available.
    My question:  how do I enable the import from my USB drive? Perhaps I will have to move the files back onto my internal hard drive using my Lightroom's old catalog.
    Howie

  • Need to get catalog item from MDM of a specific supplier

    Hi gurus,
    i need to get the list of catalog item from MDM of a specific supplier,
    user will give the supplier and i need to bring the list of the catalog item
    that belong to the supplier that the user gave me,
    through abap.
    is anyone can help me with wich class+method do i need to use if i have the supplier name or id?
    thanks in advanced,
    dana.
    Edited by: dana leving on Jan 10, 2011 3:59 PM

    Hi Dana.
    You can achieve this through MDM Webservices.
    1. Create a MDM Webservice
    2. Configure the tables and list the list of fields which you want to retrieve
    3. You can specify the search criteria as well(supplier=XXX)
    4. Generate it and save it
    You can deploy the application in your landscape and call this webservice from your custom application to create shopping cart.
    The below link will give you an insight of MDM Webservices.
    http://help.sap.com/saphelp_nwmdm71/helpdata/en/45/018c03166a0486e10000000a155369/frameset.htm
    Hope it helps.
    Regards
    Bala

  • How to migrate the RPD and catalog file from siebel analitics to obiee

    hi all
    How to migrate the RPD and catalog file from siebel analitics to obiee and obiee to obiee 11g
    Thanks
    Sreedhar

    hi sreedhar,
    you can migrate from siebel to obiee 10g...check this out http://debaatobiee.wordpress.com/tag/migration-siebel-analytics-obiee/
    Next install OBIEE 11g and migrate obiee 10g to 11g using this http://prolynxuk.com/blog/?p=424
    hope answers your questions.
    Cheers,
    KK

  • How to get RMAN catalog information from Target database?

    Hi,
    How to get RMAN catalog information from Target database because i don't know about catalog database? is it possible?
    Thanks

    If you run RMAN backups of a target database using a Catalog schema in another database, the target is not aware of the catalog.
    The RMAN backup script would have the connection identifier for the Catalog.
    Hemant K Chitale

  • Troubleshooting javascript error in OCI catalog

    Hi experts.
    I have created an OCI catalog for a customer.
    The customer is using SAP ERP ECC 6.0 EHP4 and IE11
    When the customer is launching the OCI catalog the shopping site appears and everything is great,
    but when the customer is pressing a certain button in the catalog nothing happens.
    I suspect that this might be due to a javascript error in the code.
    However the browser in this system has no developer toolbar and every menu option
    is overriden. The F12 key is escape etc.
    So basically what I want to know...
    Is there a way to debug a javascript error in this environment?
    By the way
    When I run the code in a regular browser it is working
    I have tested IE7 - IE11
    FF 36.0.1
    Chrome 40.0.2214.115 m
    with regards
    /Jocke

    Thank you for your response,
    I have seen this page. How can I upload the source files for people to take a look as requested in this link?
    Brett Messick
    Senior Digital Media Developer
    Enterprise Learning | People and Organization Effectiveness
    T. Rowe Price
    4515 Painters Mill Road
    Owings Mills, MD 21117
    •Office: (410) 345-6917
    •E-mail: [email protected]

  • PM to SRM integration through OCI catalog

    Hi,
    We have sucessfully set up the necessary settings in ECC6 and SRM for OCI catalog integration when in transaction IW31 (Create Order)
    I can see in table EPRTRANS the PR number and when running programme BBP_EXTREQ_TRANSFER the PR is transfered to SRM.  When looking in transaction SLG1 I am getting an error message saying the Tax Code 00 does not exist. Check enteries
    Regards,
    Gary

    Hi Yousif,
    Why dont u save the search as a named search in MDM and then pass it onto the SRM MDM.
    Save the records  as Named search in MDM Data Manager
    For eg:
    Named Search name -->> search1
    Now while passing the parameters to the SRM MDM Catalog specify the Named Search in its url.
    http://J2EESERVER:PORTNO/SRM-MDM/SRM_MDM?sap-locale=EN&HOOK_URL=&mask=&namedSearch=search1&username=Admin&password=PASSWORD&catalog=REPOSITORYNAME&server=MDMSERVERIPADDRESS&datalanguage=EN
    After passing the named search in the hook url the you will be able to see only the search which was saved in Data Manager.
    Hope dis helps u
    Regards Tejas.........

  • PS Elements catalog problems from Album Starter Edition

    I have PS Elements 11 installed on my new notebook. I have copied all my photos from my old PC into the Photos folder on the notbook (running Windows7).  I then imported them into PS Elements. I had them all catalogued on the PC under PS Album  Starter Edition. I have copied the  the catalog  .psa file as suggested in the instructions &  used the convert command under Elements' Manage Calalogs. Everything seemd to go as expected; all my 'Collections' came in as 'Albums' & all my Tags are there.. But  none of the images are being read. All the thumbnails are the generic flower image. It seems tthe catalog is still pointing to the old D: drive on my PC& it wants me to "connect the external drive".  What have I done wrong? Have can I fix this?  I have nearly 9000 photos & hundreds of tags etc.  I will break my heart to lose the cataloging.

    Thanks so much, Andaleeb, for your interest in my problem.
    The last idea I had was similar to your suggestion - to connect my new
    notebook (on which I have PSE11) to the old PC (which has Starter Edition
    on it), using Peer to Peer by wireless, so the notebook could see the files
    on the PC.
    Then Import the images into PSE11 from the "external drive" - this I
    managed to do fairly easily.
    Then I thought I should be able to access the Catalog file on the PC, in a
    similar way from the notebook via the wireless connection.
    My thinking was that it then should not be confused about where the images
    were actually located; and I would then be able to send a backup
    instruction from PSE11 to the files on the PC; and THEN - restore from that
    backup, and using the fact that when restoring, PSE11 asks if you want to
    relocate the files and catalog to a new location - and I could choose to
    relocate them on the notebook.
    However, although I managed to import the images into PSE11 easily, I could
    not get it to recognize the catalog (.psa) file on the PC via the wireless
    connection. I checked & rechecked that I had the relevant folder set
    correctly to 'share', but no luck.
    I don't know why this was, because it you copy the catalog file to a usb
    stick & plug it into the notebook, it can pick it up OK.
    So I tried that anyway, and converted the catalog again from the usb stick,
    hoping that since the import of the images was via the wireless connect,
    PSE11 now 'knew' the images were located on the 'external' PC hard drive;
    but still the converted catalog would not function. Same as before - all my
    Albums & Tags were listed correctly, but all the image thumbnails changed
    from correct images to 'lost' generic Adobe flowers.
    At that point, I lost heart & decided I would have to abandon the project &
    just start the massive task of re-cataloging. I have a total of 64Gig of
    photos, of which about 12Gig were cataloged. Very sad!
    Now your suggestion has inspired me to give it one more try. It might make
    a difference to have PSE11 on the PC working locally rather than trying to
    negotiate the external drive thing. I had forgotten that I can do this with
    a trial version.
    I will let you know how I go.

  • Transfering catalog files from PC to Mac

    Do I really need to use an external hard drive for this operation? I am transfering Elements 5 on PC to Elements 10 on Mac.
    Ihave followed instructions on Adobe site and have upgraded to E10 on the PC with the trial version but could not see why it was necessary to use an external hard drive to transfer the E10 catalog from the PC to Mac. However, have tried using shared files across home network and also a memory stick but on both occasions I am told that the file is not a valid catalog file from which `I can restore. Do I really need to buy a external hard drive just to move a file!!?

    Johnyonetwo your question can best be addressed in the Photoshop Elements forum.  I would recommend re-posting your question there.

Maybe you are looking for