OCP Certification Not Received after 45 Days!!

Hi
I have completed my OCP10g Admin on 19 sep 2012, done all formalities, Success Kit shows "You should receive your success kit within 45 days of the ‘Created Date’ above" my Created Date is same 19 Sep 2012, I have raised the SR with +"*Oracle Certification Support*" (http://education.oracle.com/pls/eval-eddap-dcd/OU_SUPPORT_OCP.home?p_source=OCP)+, there is no response from them. 45 Days criteria Already Passed.
What is the best solution to get the certificate from Oracle soon?
Why we have to do follow up everytime to get the certificate from Oracle, though Oracle ask all things needs to be fulfilled like "Course completion" etc. and I did that, also I want to mention here My Testing ID is same so there is no issue of different testing ids.
Experts please advise,
Thanks & Regards
TJ
Note: Success Kit Status reads this *19-SEP-12 | 1Z0-098 | Oracle Database 10g Hands-On Course Requirement | PASS*

Taking your questions in reverse order:
Note: Success Kit Status reads this 19-SEP-12 | 1Z0-098 | Oracle Database 10g Hands-On Course Requirement | PASSThat's not the data from the 'Success Kit Status' page. That is from the 'Exam History' page. The fields from the 'Success Kit Status' page are:
Candidate Name Shipping Status Created Date Certification Address1 Address2 Address3 City State Postal Code Country
Success Kit shows "You should receive your success kit within 45 days of the ‘Created Date’ above" my Created Date is same 19 Sep 2012The line with the date of 19-SEP-12 is not from the Success kit page as indicated above. The Success kit is very unlikely to have that same date, as OE would have needed time to verify your course attendence. Even my most recent test has the success kit status the day following the 'Test Start Date' from the exam page and there was no course to be verified. You're is probably several days later than the date you passed the test. That said, the 45 day period is not an 'Oracle' delay. The date shown in that screen is when they shipped the packet, and they suggest waiting 45 days before becoming concerned about delivery because of the time it takes for some overseas shipments to arrive.
I have raised the SR ...there is no response from them45 days from 19-SEP would have been 03-NOV -- two days ago (and Saturday). Unless you jumped the gun, that means your SR was created yesterday or the day before. You might give them a couple of business days to respond.
Why we have to do follow up everytime to get the certificate from OracleI have received about ten certificates from Oracle. I have never had to follow up on any of them. However, I don't stand by the mailbox counting the days either. Once I pass the test, the time for worrying is over. Oracle will send the certificate. It's conceivable that a certificate can get lost in the mail -- especially for overseas shipments. However, they will send it.
Go back into Certview and click on the 'Success Kit Status' Page. Has the kit been sent?

Similar Messages

College student coupons not received after 3 days of waiting

I signed up in store on Sunday, 10/5/2014 to receive college student coupons. They have yet to arrive. I got the message to confirm my address, which I did. I have also since gotten some email spam from Best Buy, so I know that those messages aren't being held up by my university.
I need assistance, please. I have signed up in the past for Best Buy college student coupons (different university, different address) and I didn't have any problem. Got the coupons right there in the store while I was waiting.
I had to go ahead and purchase the laptop that I needed and the store manager said I could return with the coupons to get a refund for the extra money I paid.
I'm extremely frustrated with this. Your email spam is no problem and I'm aware of all your current sales, but the coupons mysteriously are unable to be sent? Come on.
Any help here would be more than appreciated. I've been patient, but this is a bit ridiculous.

Hi bunnicula,
Being that you needed to purchase this laptop in advance of receiving the coupons, I can completely understand you wanting to receive the coupons as soon as possible. I am looking into this for you, and as soon as I have more information I will post back to this thread. I am assuming the .edu email address used to request these coupons is the one you used to register for this forum?
Thanks for posting,
Allan|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Error msg: "Config message not received after 45 seconds"

I have developed a simple stateless session bean. After being called once, the following is output to the log:
Thu Jan 04 18:15:46 CST 2001:<I> <RJVM> Signaling peer 3978882810638278829C198.171.129.36 gone: weblogic.rjvm.PeerGoneException:
- with nested exception:
[java.net.SocketException: Connection reset by peer]
Exactly 45 seconds later the following is output and I can no longer access a JDBC connection from my pool:
Thu Jan 04 18:16:31 CST 2001:<I> <CliCon-#|myserver|0.978653734170> Connection to client for ClientContext - id: '#|myserver|0.978653734170', bound: 'true', dead: 'false' has been unexpectedly lost be
cause weblogic.rjvm.PeerGoneException: Config message not received after 45 seconds.
Initiating hard disconnect.
Can anyone shed some light on this for me?
Thanks in advance!

Hi,
this is the explanation why this occours:
If there is a t3 Client connects to the server, every ( weblogic.system.configTimeoutCheckVal
) time, ConfigTimeoutChecker will run to check the t3 client is disconnected or
not. The problem is, if the client has already disconnected, the ConfigTimeoutChecker
still runs every time to check the disconnected t3Client again and again.
This should be solved with SP11.
Christian Plenagl
Developer Relations Engineer
BEA Support
"kelvin" <[email protected]> wrote:
>
I am using WLS 5.1 sp8 128SSL, I got this error. I results that the java
object
in the JMS channel is sometimes missing. I increased the weblogic server
thread
from 15 to 30. But still can't help. I also ugrade the client server
to use the
same sp8. But can't help. Some one mentions the sp9 can solve this problem.
It
is true? anyone have it for unix ? where can I download it? I can't
find it in
weblogic web site.
Kelvin

App not install after 3 days HELP

I bought an app called Day One on the 15th of July, it still did not install after 3 days.
Everytime I try to install it, this message comes up 'Day One failed to download use the purchases page to try again.'
This is what shows up on the launchpad.

Hey
Could you try updating to the latest version of iOS (8.3)?
Let us know if the problem persists.
Thanks

Service not received after paying 10 days ago

I have bought a paid for a new service about 10 days ago, but have not received my serivces or credits. And I could not find a way to talk or email any of your staff. It is too bad. Please have a look and tell me what happened.

I can see the customer service is becoming more and more difficult to get touch with. I have waitted for 11 days, no response to my account. I did online banking transfer, if you have not received money, please tell me.

10g OCP certificate not received(waiting for 2 months)

Hi,
I have sent details requested for cetificate processing to [email protected] and given below is the copy of the details.
Full Name: xxxx
Oracle Testing id: xxxxx
Exam Taken : 1Z0-040-ENU: Oracle Database 10g: New Features for Administrators
Score: 100%
Email address:xxxxx
Mobile:xxxxx
I am waiting for my OCP 10g certificate. I completed the Oracle exam 1Z0-040 on Dec 1,2010 and its been more than 2 months now....
I completed Oracle 9i OCP in 2007.
Please let me know why i dint receive the ceritifcate (or anything is needed from my side) and when can i receive the certificate.
There is no reply from Oracle for couple of my mails.
I dont know how to escalate this matter and whom to escalate..
Please guide me...I want this certificate..
Thanks,
DB

DB wrote:
Hi,
Thanks for the reply.
I have already registered my details with certview. Sorry, I dont like getting sympathies from anyone.
I figured out the issue.
Since I completed Oracle 9i OCP with prometric and did 10g OCP with pearson, details of my 9i OCP are not reflecting in Pearson VUE.
I dont remember the prometric id.
But once i get the prometric Id, Can you please let me know how to merge the 9i OCP details in pearson VUE site?
Thanks,
DBOK. .... No sympathy then ;-)
However .....
It may (or may not) be you are suffering from having taking exams under two Oracle Testing Id.
What should have happened is that when you registered with Pearson VUE for your exam you existing Prometric Id should have become your Oracle Testing Id. If however you were allocated a new Oracle Testing Id then the exams will be against two different Oracle Testing Id's, and it will be as if 2 different people have taken the exams.
Please note exams passed under Prometric will never be shown on the Pearson VUE system .... however exams taken under both Pearson VUE and Prometric will show under Certview. So it is Certview where you need to look.
If you look under Certview and only see some of your exams, in particular those from Pearson VUE and not Prometric (allowing for lag of a week after you pass them), then you probably have taken exams under two Oracle Testing Ids.
To Summarise:
1) If under Certview you can see all of your exams .... then you do not have a problem of having two or more Oracle Testing ID's.
2) If under certview you can see all of your exams, but you do not have the certfications awarded you expect, then there would appear to be a problem with the pre-requisites Certview (and the Oracle Certification database) thinks you need and you think you need.
3) If under certview you can see your exams under Pearson VUE, but not under Prometric, then you probably have taken exams under two Oracle Testing Id's. You need to establish both of these and follow the procedure for + I have taken my tests under two different candidate IDs. How can I get these merged? + under the FAQs.
Basically certview helps to confirm if the certification was actually awarded (and a little investigation should show why it was not) or if the problem was a shipping error.
rgds - bigdelboy.

Material received after 180 days

Hi,
We have a requirement of Challan Report, which has been exceed 180 Days and received. Means after 180 days received the material's.
How can i find the received materials list after 180 days..
please tell me table name from which i can refer data and if any standard report exist for this, please tell me...
we have following fields:
Challan No..... Challan Date.....Vendor Code..........Material.........Qty..........Received Date.........Total No. of Days
Regards,
Anil Kumar

Hi Anil,
In purchasing you can find the PO date for the PO which has the material in 'EKKO-BEDAT'. And the receipt of the material date can be found from MKPF-BUDAT, for the material document corresponding to the PO.
This can be found from EKBE. Then You calculate the difference between MKPF-BUDAT and EKKO-BEDAT and check whether this is more that 180 days. I am not sure whether this will meet your requirement, but you can try this...
Regards,
Birendra

Can send SMS but not receive after update...

After updating my iPhone 4S to ios6 i have problems with receiving messages.I can send SMS but not receive. What to do?

Although I don't believe in consequences, I think this might be one of them. My email was working fine until I installed my VPN. I use the Thunderbird email application, which I like a lot, for three Hotmail accounts and two Yahoo accounts. After installing the VPN I could receive mail but could not send it on any of my accounts. I contacted the VPN and they sent me some numeric IP Addresses to put in my account settings. One for the Hotmail accounts and one for the Yahoo accounts. I did as instructed and the email seemed to work okay. It was late in the evening and I went to bed. The next morning, I could send and receive emails on the Yahoo accounts, but could only send emails on all of the Hotmail accounts.
I guess I'd like to know if anyone else is having this same problem. I'd hate to think it was just me. :-)
I would like for Thunderbird to tell me if there is a way to change the outgoing server in the Account Settings, so I can enter the IP Address in there, or does the fact that I entered an IP Address in the Server Name box, cause it to override any other entries? Or should that even make a difference with me receiving mail?
Also, at what time limit does Thunderbird send back a message that the connection to the server timed out? I continually get that message.
I found a way to do a ping on the Hotmail server and the fastest response time for the last two days was 258.09 which seems very slow for a business computer. At least for a business that wants to stay in business. So is that time above the Thunderbird threshold of the connection time out message to be generated?
Thanks for all your help and suggestions, Carole

HT1933 New Yorker new sub will not download after 2 days 4G and Wireless

I have never had a problem getting anything to download, but yesterday I downloaded NewYorker app then one month sub and the sub downloaded the cover and table of contents and each page like Talk of the Town has a title but says waiting to download. I use 4g but took to coffee shop to download and use their wireless but did not work.
I have not received a purchase email yet, it is listed as purchased on my Apple Account though. The charge has not come in on my online credit card statement.
I have deleted app now, I don't want to fool with New Yorker if they don't have their act together.
I subscribe through Apple to NYTimes and Economist. Not a problem. I have about 10 other apps that all work just fine and all have downloaded and updated just fine.
Any suggestions.

I hear that it will stop restoring after 3 days, so if you can wait another day, to make total of three you should be OK and will not need to force anything.

Retired applications are not deleted after 60 days

We have several applications that are retired, all deployments are removed. According to SCCM documentation retired applications should get deleted after 60 days automaticly. It has been about 1 year since that the application is retired, but it does not
get deleted.
Any idea's?
Steven Mudde

Application is retired, deployments removed, no references. Manual deletion of the applications is not the problem, this works as it should.
However SCCM documentation says "If an application that has no deployments is retired, it will be deleted from the Configuration Manager console after 60 days."
http://technet.microsoft.com/en-us/library/gg682031.aspx
This does not work
Steven Mudde

Text messages not received after iPhone restore

My phone screen broke (iphone 5) and I had my phone off for the majority of the day until I bought a new phone later that night. My question is, when I restored my new iPhone 6 to a 2 day old back-up during the setup process, I was expecting to see what messages (text & iMessage) I received during the day on my iPhone 5, but none of the text messages showed up on my new iPhone 6 after the restore. Is there anyway of receiving the text messages sent to me before I restored to the new iPhone?

You only get data back that was included in your backup.

Push messages not received after payload installed using MDM

I have successfully installed profile using MDM protocol in iPhone device. But after that when I tried to send push notification using pushmagic and APNSToken, nothing received on iphone. During payload installation, I am getting warnings like this, not sure, if that is what causing issue?
Feb 14 18:32:14 unknown com.apple.launchd[1] <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-dev
Feb 14 18:32:14 unknown mdmd[988] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-dev'. APS connections will not persist past process lifetime.
Feb 14 18:32:14 unknown com.apple.launchd[1] <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-prod
Feb 14 18:32:14 unknown mdmd[988] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-prod'. APS connections will not persist past process lifetime.
Can anybody help to resolve issue?

John_Berkowitz wrote:
This is the only problem I have had with my iPhone 4, even with iOS 4.0.1. BUt here it is:
An office mate of mine sill has his 3G and we both have CNN and AP News apps installed. Yesterday he received a pop-up from one of those, but I did not. And this promted me to investigate my settings. Everything appears to be set up correctly and turn on, and neither of the apps have any in-app settings. So why didn't I get mine? Thinking back I have not received any push notifications on any of my programs for awhile, and I dthink this issues started with the 4.0.1 update, because I recall getting a badge on one of my folders (I didn't upgrade my 3G to iOS 4, so no folders before iPhone 4).
In Settings is Notifications turned on? Also tap on Notifications to see the settings for each app.

Mail Will Not Receive After 10.6.2 Update

I just updated to 10.6.2 and now my mail program will not receive any incoming emails. I seem to be able to send however. I'm sorry for another one of these "me too" postings about the mail program not working post update but I'm hoping Apple will see the number of postings regarding this issue and correct the problem.

Ever since I updated to 10.6.2, I have had intermittent problems with sending, forwarding, and replying to emails from both my yahoo and mobileme accounts. I hit send and get the rotating rainbow and end up having to force quit. And now today, it's not downloading any mobileme messages. They are showing up on my iphone but not the iMac.

Why restore of my new mini ipad is not completed after 7 days?

Why my new mini ipad is still in a restore mode after 7 days? What should i do?

Hello Yves,
If the restore is taking a long time, then I would start the process over. Check out the article below for more information.
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT1808
Regards,
-Norm G.

Long installation of upgrade 9.5.3 to Acrobat Pro: it has not stopped after three days

I have responded to a request to install upgrade 9.5.3 to Acrobat Pro. After three days I still see "Removing applications." How can I stop this?
Thanks

if windows, use task manager (ctrl-alt-del)

OCP Certification Not Received after 45 Days!!

Similar Messages

Maybe you are looking for