OCR SDK for wireless devices using java?

Dear Forum members,
Can any one please sugest some OCR SDK for mobile devices which is compatible with java......
Thanks in advance....
---Vidya

Thanks.
This makes our deployement script stop working. We don't want to use the Webi Rich Client to deploy webi report manually to different servers (like Development, SIT, UAT, Production, etc.). We use shell scripts calling Java programs to deploy reports.
Is there any other way to deploy webi reports using Java SDK which can find the universe by name in the same CMS automatically and link to it?

Similar Messages

File.upload on Air SDK for iOS devices failed to send http request to server.

I am trying to use ActionScript's File.upload to upload a file on Air SDK for iOS8 environment, but the File.upload does not work properly. No handler about the file upload is executed after File.upload is invoked, and no exception is caught. When I check the network traffic of the server side, I found that no http request even hit the server after File.upload is executed. The code snippet here is very simple.
private var file:File;
private var dir:File;
//This method is executed to create a file and upload it when the Upload Button is pressed.
protected function OnUploadButtonPressed(event:MouseEvent):void{
var str:String = 'This is test';
var imageBytes:ByteArray = new ByteArray();
for ( var i:int = 0; i < str.length; i++ ) {
imageBytes.writeByte( str.charCodeAt(i) );
try{
dir = File.applicationStorageDirectory
var now:Date = new Date();
var filename:String = "test" + now.seconds + now.milliseconds + ".txt";
file = dir.resolvePath( filename );
var stream:FileStream = new FileStream();
stream.open( file, FileMode.WRITE );
stream.writeBytes( imageBytes );
stream.close();
file.addEventListener( Event.COMPLETE, uploadComplete );
file.addEventListener( IOErrorEvent.IO_ERROR, ioError );
file.addEventListener( SecurityErrorEvent.SECURITY_ERROR, securityError );
file.addEventListener(ErrorEvent.ERROR, someError);
file.addEventListener(ProgressEvent.PROGRESS, onProgress);
file.upload( new URLRequest("http://10.60.99.31/MyPath/fileUploadTest.do"));//This line does not work. No handler is executed. No http request hit the server side.
} catch( e:Error ) {
trace( e );
//Complete Handler
private function uploadComplete( event:Event ):void
trace( "Upload successful." );
//IOError handler
private function ioError( error:IOErrorEvent ):void
trace( "Upload failed: " + error.text );
//SecurityError handler
private function securityError(error:SecurityErrorEvent):void{
trace( "Security error:" + error.text );
//Other handler
private function someError(error:ErrorEvent):void{
trace("some error" + error.text);
//Progress handler
private function onProgress(event:ProgressEvent):void{
trace("progressHandler");
When executed on Air Simulator, it works fine as expected, and the file is successfully uploaded to the server. But When executed on iOS devices(in my case, iPad), as I explain early, no handler about the file upload is executed, and no the http request even hit the server. So I think the problem may be in the client side. It seems that the Air SDK for iOS just failed to send the http request for some reason.
To make my problem more clear, I list my environment below:
Development Environment: Windows7 (64bit) / Mac os 10.9.4 (Tested on OS platforms.)
IDE: Flash Builder 4.7
Air SDK: 3.8 / 16.0.0 (After I updated to the lastest Air SDK 16.0.0 , the problem still exists.)
Application Server: Tomcat7 + Spring
Target OS: iOS 8
I have been struggling for this for days. So I really appreciate it if anyone has any idea about this.
Thanks in advance.

Hi bluewindice ,
As you have quoted ( ActionScript's File.upload does not work on Air SDK for iOS devices ) , this issue has been replicated at our end, and our team will be working on it.
Thanks,
Tushar

Search for wireless devices display

Some how I managed to get up the circular display screen with a rotating line which displayed all available devices. Now its gone, and I cannot get it up. I left click on the taskbar icon and 'search for wireless devices' but only get the small display. anyone help please?

Hi again
I think that it is not the reason why you can not start this application. You can configure the wireless connection on two simply ways. First one is to use windows settings (like in your case) or you can use some client to do this. In this way the windows option must be disabled.
As far as I know the ConfigFree tool is no a client. This tool can help you to get more precise information about your LAN or wireless connection. Like you can see there you can create some profiles and enable or disable all hardware components that your unit use for communication with other external devices.

I have multiple apple devices mainly used between me and my wife , my question is that can i have two sets of contacts backed up to icloud one for her devices and one for my devices using the same itunes account

i have two sets of devices one ipad, iphone and mac which i use and one iphone ipad and mac which my wife uses
now is it possible to have two sets of contacts and calendar synchronised for her devices and one for my devices using the same icloud account
i dont want a separate itunes account as we use the same music books and apps to be automatically downloaded which is very convenient
please guide

You can set up different iCloud accounts on each device using different Apple IDs (to keep your mail, calendars, contacts, etc. separated), and still share the same iTunes account (in Settings>Store on your device). There is no requirement that you use the same Apple ID for purchases and for iCloud.

AAA authentication for networking devices using ACS 4.1 SE

Hi!!!
I want to perform AAA authentication for networking devices using ACS 4.1 SE.
I do have Cisco 4500, 6500,2960, 3750, 3560, ASA, CSMARS, routers (2821) etc in my network. I want to have radius based authentication for the same.
I want telnet, ssh has,console attempt to be verified by radius server & if ACS goes down then it will be via local enable passwordf.
For all users i need to have different privilege levels based upon which access will be granted.
could u plz send me the config that is required to be done in the active devices as well as ACS!!!!

Pradeep,
Are you planning MAC authentication for some users while using EAP for others?
For MAC authentication, just use the following in your AP.
aaa authentication login mac_methods group radius
In your AP, select the radius server for mac authentication. You must have already defined your ACS as a radius server.
In your SSID configuration, under client authentication settings,
check "open authentication" and also select "MAC Authentication" from the drop-down list.
If you want both MAC or EAP, then select "MAC Authentication or EAP" from the dropdown.
Define the mac address as the username and password in ACS. Make sure the format of the mac is without any spaces.
You will not need to change anything in XP.
NOTE: XP normally does not require user authentication if machine has already authenticated but it might behave differently. If it does, I can let you know the registry settings to force the behaviour change.
HTH

Which Book is good for e-commerce using JAVA & XML

I want to find a Book that is good for e-commerce using JAVA & XML,
or where can find JAVA & XML new and develop?
can you suggest me?
Thanks very much!

I can recommend "Java and XML" from O'Reilly. It's a very good book.

Satellite M35: Configfree search for wireless devices

I have a satellite M35. The icon for search for wireless devices in configfree stopped appearing in my desktop.

Hi Enrique,
you could look up if the Configfree software is already installed on your unit. You can then create a new shortcut on the desktop by right clicking the "cfmain.exe" program. It should works now!!
or
you deinstall the software and re-install it from your Toshiba Tools and Utilities CD. If you do not have the CD, you can download the newest Version from Toshiba Amerika
at http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
(I think the Satellite M35 is an US product)then do a reinstall of the software.
I hope this will help you.
cu Sammy23

Creation of a database engine for mobile devices using j2me

am trying to develop a database engine for mobile devices.. it is to develop a miniature version of the DBMS that
can be deployed on a mobile phone..I have to develop my own code for performing tasks such a s creating a table,
inserting values into it, selecting from it etc..
I limited my self to develop the software so that it can perform 3 functionalities of create, insert,select..
I should be taking the details such as table name and its parameters from the user and then should be able to
create a suitable data structure for it(i tried to develop a class)...
Usage of RMS package helps me partially in this.. I did that and ll be doing that..
I got stuck while developing the code for creation of a table.. I am facing problems in creating a dynamic data
structure for a table and also to use such data structure else where in my project..
I need help in developing an algorithm for this..
I would be very grateful to u all if u help me out in developing the code for this project..

I'm sorry for the amount of time it took me to get back. Derby is an open source database written entirely in Java. I do not know if it can support resource constrained devices like MIDP compliant, but may work okay with CLDC.
But outside of Derby being a solution, let me give you a few ideas off the top of my head.
Set up a database server in a separate thread. This server will really be your controller for RMS access.
Since RMS is just a big sequential 'pipe' you will have to think of data as 'frames' - (starttable) (tableID) (tablename) (data) (tablename) (data).....(endtable).
When you need to write additional data, just append it to the end of the RMS object.
When you need to retrieve data, thing are more complex.
1. Read in all data, looking for your particular tableID. This may be made much easier using RMS filters - (I'm not sure, I've never used them)
2. Once start of table of interest is found, stick the data elements in either a java vector or array until you reach the table end identifier. I think vector will be a better choice - trust me. (I think its available in J2ME...)
3. Package this into a do while loop until the element you are searching for is read. If you need to do some sorts on the data or something else that requires the all the data to be present then you need all the data for that particular table. One thing will always be clear. The first data you grab will always be some start table identifier and the last data you grab will be an end table identifier. We just don't know which table because of how we put stuff in the RMS resource.
This provides you a few positives as well as negatives:
Positive:
1. Fast data writes, no need to search for a particular table before accessing it, nor do you need to search for an index in that table.
2. When looking for data, data may* be found without searching through the entire table. This is accomplished with RMS filters or logic test within the RMS read loop.
Negative:
1. Slow when all data of a table is needed (i.e. compute sums or averages of entries). The entire RMS database must be read to ensure all the entries are searched. An example of how this is a problem is as follows: You have 5000 entries in you RMS database resource and you are looking to compute the average of a value in some table. When you first wrote the data to the table, it was done sequentially and no other data for that table exist. But we can't tell if that's the case, so we have to read through all 5000 entries to make sure we looked for every piece of data.
Beacuse of this issue, this database structure, performance may be fine for 50K - 100K entries (depending on table element size), if the reading requirements don't force full data reads. Otherwise, 25K may be an upper limit.
I hope this helps.
Edited by: estarkey on Mar 17, 2009 9:15 PM
Edited by: estarkey on Mar 17, 2009 10:01 PM

Please Its very urgent How to connect the thumb device using java media fra

I was new to JMF please help me
i wnat the code for connecting to the signatuure pad or thumb device present iam doing project in biometrics please if any body knows
the code farward it tome bye
Advance Thanks

The SecuGen FDx SDK for Java 1.0 Beta1 is now available. It is posted at http://sgdn.secugen.com. This is a JNI wrapper for the SecuGen FDx SDK v3.0. Sample source code including JSGD, A SWING version of the SecuGen Diagnostic utility. Currently only MS-Windows is supported.
Best regards.
=Dan=
Dan Riley - SecuGen

ISE Profiling for Wireless Devices (WLC 5508) like Laptops and Mobile Devices

Hi,
We have integrated WLC 5508 to cisco ise 3315 with ios 1.1.1 and using Guest Sponsor portal for wireless guest users.
Where we have created open ssid in wlc and redirect web login portal in wlc for guest users. We have enable all respective node in policy service for profiling and also configure snmp in wlc as well as in ise.
When guest user is connected to open ssid its get redirected to web login page of ise portal and when it gets login we are only able to see the username which guest user login but not the end device in monitoring log.
Wireless End devices are not able to get profiled can any one tell me what configuration I need to do on ise or wlc side to profiled end guest wireless device like android,iphone and laptops
Thanks
Pranav

Hi Tarikh,
I only want to identify the end devices for wilress guest user. I have configured MAB Authentication and configure autorization policy where in mention identity group any condition as wlc web authentication and athorization profile only guest mentioning plain access for the same.
Can you help me how I can achived profiling for wirless guest devices. I have configured all profiling probes . Enable snmp on wlc as well as in network devices.
What else I need to configured to achived just identiting device nothing but profiling and which should reflect in authnetication logs.
Thanks
Pranav

TC Looses connection to the Internet for wireless device & new Apple TV

I have a new TC (1 TB) that I got within the last month or two, I use it as my Internet router behind my DSL modem. TC gets a DHCP address from my DSL modem then does NAT to both Ethernet and Wifi devices behind it. After a short period of time I have noticed that my Wifi devices (New Apple TV, Macbook Pro, & 2 Iphones) will loose connectivity to the Internet, although they never loose their Wifi connection. What is strange is that I have several hard wired Ethernet devices that can still access the Internet going through the TC at the same time the wireless devices can not.
In order to get the wifi devices back working I have done a few things, disconnected and reconnected the Ethernet cable between the TC and my DSL modem, power cycled the TC, power cycled my DSL modem. It seems like the most reliable method is power cycling the TC.
This seems to happen pretty frequently however with no pattern or cause I can detect. The only interesting thing is that I just installed my New Apple TV and prior to that I do not recall having to recycle the TC. I am inclined to think the TCP video streaming might be overloading the TC and causing the wireless process to crap out while the ethernet ports are fine.
Any thoughts or comments would be appreciated. Will do some more troubleshooting and will contact Apple support at some point. I will also update this thread when I find out more.

I have a similiar problem - but I don't have Apple TV - and when the TC looses internet connection it is for wired and wireless devices. WLAN and LAN still working.
At the same time i cannot access the configuration of the TC thru Airport - are you able to do this?
I also have the feeling that high data loads provokes the error more often.

Need Sample Code for Vendor creation using JAVA API

Hi,
I have a scenario like Vendor creation using Java API.
1.I have Vendors (Main) Table.
2.I have look up tables like Account Group.
3.Also Qualifier table(Phone numbers) too.
Could you please give me the sample code which helps me to create Vendor records using Java API?
I need Code samples which should cover all of the above scenario.
Marks will be given for the relevent answers.
Best Regards
PK Devaraj

Hi Devraj,
I hope the below code might solve all your problem:-
//Adding Qualified field
//Creating empty record in Qualifed table
//Adding No Qualifiers
Record qualified_record = RecordFactory.createEmptyRecord(new TableId(<TableId>));
try {
qualified_record.setFieldValue(new FieldId(<fieldId of NoQualifier), new StringValue(<StringValue>));//Adding No Qualifier
catch (IllegalArgumentException e2) {
// TODO Auto-generated catch block
e2.printStackTrace();
catch (MdmValueTypeException e2) {
// TODO Auto-generated catch block
e2.printStackTrace();
//Creating Record in Qualified table
CreateRecordCommand create_command = new CreateRecordCommand(connections);
create_command.setSession(sessionId);
create_command.setRecord(qualified_record);
try
create_command.execute();
catch(Exception e)
System.out.println(e.toString());
RecordId record_id = create_command.getRecord().getId();
//Adding the new record to Qualifed Lookup value and setting the Yes Qualifiers
QualifiedLookupValue lookup_value = new QualifiedLookupValue();
int link = lookup_value.createQualifiedLink(new QualifiedLinkValue(record_id));
//Adding Yes Qualifiers
lookup_value.setQualifierFieldValue(0 , new FieldId(<FieldID of Yes Qualifier>) , new StringValue(<StringValue>));
//Now adding LookUP values
//Fetch the RecordID of the value selected by user using the following function
public RecordId getRecordID(ConnectionPool connections , String sessionID , String value , String Fieldid , String tableid)
ResultDefinition rsd = new ResultDefinition(new TableId(tableid));
rsd.addSelectField(new FieldId(Fieldid));
StringValue [] val = new StringValue[1];
val[0] = new StringValue(value);
RetrieveRecordsByValueCommand val_command = new RetrieveRecordsByValueCommand(connections);
val_command.setSession(sessionID);
val_command.setResultDefinition(rsd);
val_command.setFieldId(new FieldId(Fieldid));
val_command.setFieldValues(val);
try
 val_command.execute();
catch(Exception e)
RecordResultSet result_set = val_command.getRecords();
RecordId id = null;
if(result_set.getCount()>0)
 for(int i = 0 ; i < result_set.getCount() ; i++)
 id = result_set.getRecord(i).getId();
return id;
//Finally creating the record in Main table
com.sap.mdm.data.Record empty_record = RecordFactory.createEmptyRecord(new TableId("T1"));
try {
 empty_record.setFieldValue(new FieldId(<FieldId of text field in Main table>),new StringValue(<StringValue>));
 empty_record.setFieldValue(new FieldId(<FieldId of lookup field in Main table>), new LookupValue(<RecordID of the value retrieved using the above getRecordID function>));
empty_record.setFieldValue(new FieldId(<FieldId of Qualified field in Main table>), new QualifiedLookupValue(<lookup_value>));//QualifiedLookUp value Retrieved above
} catch (IllegalArgumentException e1) {
// TODO Auto-generated catch block
 e1.printStackTrace();
} catch (MdmValueTypeException e1) {
 // TODO Auto-generated catch block
 e1.printStackTrace();
//Actually creating the record in Main table
CreateRecordCommand create_main_command = new CreateRecordCommand(connections);
create_main_command.setSession(sessionId);
create_main_command.setRecord(empty_record);
try
 create_main_command.execute();
catch(Exception e)
 System.out.println(e.toString());
Thanks
Namrata

How to do Front End Validation for JSP Forms using Java Script with 9iJD...

How to do Front End validation using 9iJD. Any wizard is there. We need to do the val. using Java Script. If its not available, please include that in the Production Release.

Thanks a lot. When is the Production Release is scheduled. Please tell us whether itll be available for Free Download. Bec, we couldnt buy. Bec, if its working fine with all the options without any bug only, we can ask our company to buy 9iJD by stating the advantages. Just explain us.

Interfacing hardware devices using Java

Respected Sir,
i want to interface hardware device with my computer.In C and C++,there is a function as outportb(address,data) and inportb(address) to access any port e.g., parallel port.whether there any function like that in Java or you can help in interfacing hardware deviced through Java with other techniques using paralled port.i will be very thankfull to you.
awais sani(Pakistan)

Have a look at:
http://java.sun.com/products/javacomm/index.html

WebStart support for Firefox Browser using Java Linux AMD64

I am trying to setup a Firefox browser to use Java WebStart (jnlp).
I am running Java Linux (AMD64)
but I have no <JAVA_HOME/jre/plugins directory and no libjavaplugin_oji.so file with the Java installation.
1) Can I download libjavaplugin_oji.so plugin somewhere?
2) Will it work in Java Linux (AMD64)?
3) Can Java Linux (AMD64) be setup to operate Java WebStart Technology?
If so, How the h--- do I do it?
Frustrated
Newbean

I have the same problem. Downloaded the 64 bit jre and found no libjavaplugin_oji.so in it.
Then downloaded the 32 bit jre and did the soft link and still no work.
Has anyone made the 32 bit jre work on the 64 bit linux?

OCR SDK for wireless devices using java?

Similar Messages

Maybe you are looking for