Ocs pre requirements doubt

hi all,
when i reviewing the "preparing for installation" document i saw some text as follows.
Requirement ------------Value
Operating System----- Oracle9iAS infrastructure and Oracle Collaboration Suite middle tier:
Microsoft Windows 2000 Professional and Server with Service Pack 1 or higher.
I didn't understand this statement. I Think this mean windows 2000 professional and oracle server.I don't know is it correct or not. It's only my guess.
Please anybody describe this statement.
Waiting for ur reply.
regards,
/kumaraswamy.n

I stand corrected, it is supported on Win2k Pro(which is workstation version). Would be best to access the MicroSoft site for details on differences between Pro and Server.
also Recommend waiting for OCS 10g release on Windows, my understand will be soon per other threads in the forum.
but if you can not wait, then look start here
http://otn.oracle.com/pls/cs904/portal.portal_cs with the install guides and release notes(have latest info)
for additional reading from Metalink.oracle.com
Note.262013.1     OCS Single box install on Windows autorun fails (must use setup.bat)
Note.284219.1     Where do I get the 9.0.4.2.1 Patch for OCS on Windows?
Note.262859.1 Common install problems on single box install for windows OCS Release2 9.0.4.1.1 // these can also help with multi-node installs
Note.283692.1     Step by Step Installation of OCS 9.0.4.1 Singleboxinstall on Windows
To download the lastest version or older software.
http://www.oracle.com/technology/software/products/cs/index.html

Similar Messages

  • Pre-requirements to install and run database

    Hi,
    I need to justify to our parent company production support team that "pre-required software installation list" mentioned in the Installation document of Oracle are software tools and packages required not just for the installation but also for the day-to-day operations to run Oracle Database. Can somebody from Oracle please answer to clear this doubt ?
    For example,
    We have linux AS 3 (Red hat Linux) and following software packages are listed as pre-requirements. I need an email, reply or document which says all these software packages are also required after installation to run daily operations of Oracle RDBMS ? I appreciate your help.
    gcc-3.2.3-2 or greater
    make-3.79 or greater
    binutils-2.11 or greater
    openmotif-2.2.2-16 or greater
    setarch-1.3.-1
    compat-db-4.0.14.5
    compat-gcc-7.3-2.96.122
    compat-gcc-c++-7.3-2.96.122
    compat-libstdc++-7.3-2.96.122
    compat-libstdc++-devel-7.3-2.96.122 or greater
    Thanks,
    - Sanjay

    These packages are required for installation of Oracle SW not for "after installation to run daily operations".
    After installation you could uninstall them but note that you will need these packages to apply patches and patchsets.
    Don't uninstall openmotif it may be required also for some components of Oracle SW.

  • Pre requirement to install PRIMAVERA p6 v7

    Hi,
    Can anyboby have the pre requirements to install PRIMAVERA p6 v7 on OEL 5 U2 (32 bit) with database 10g Release 2?
    what are the steps to be followed before installing primavera?
    kindly share if anybody have experience on this...
    Regards,
    karthick
    Edited by: 800196 on Oct 5, 2010 8:37 AM

    Hi
    This forum is dedicated to EBS Oracle Projects.
    You might want to post your message on a forum dedicated to Primavera product.
    Go to Forum Search and look for -
    Primavera » Primavera P6 Enterprise Project Portfolio Management
    Dina

  • Pre-requirement of eDirectory ?

    Hi All
    Customer use eDirectory as LDAP Server, and have some user account replicas like US/EU/China~~~and Headquarter (Primary server connect) own all replica (R/W).
    last month, customer make satellite server enable auth service, but he fine the auth-response time very slow. the time at HQ is about 4-5 seconds,but satellite server about 25-30 seconds (testing account is on local replica,not other replica).
    When I change eDirecgtory which satellite server connect from local to HQ, the response time faster.
    May I ask the base pre-requirement of eDirectory that satellite server connect ?? Does it indeed require own all replica ?
    wencheng

    wyld,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • RAC Installation ---- Hardware Requirment Doubt

    Hi All,
    I have to install 10g RAC at home for learning purpose. I have two PC's with same version of
    linux (Oracle Enterprise Linux 32 bit each) installed, but having different hardware. One machine is laptop and
    other is desktop. So, will it be possible to install RAC on these machines. Is it a pre-requestie to have same
    hardwre at both machines.
    Please give your valuable suggestions.

    Hi,
    You can istall RAC with the combination of Desktop and Labtop. You need NIC cards for both the Machines. You need shared storage. for that You can use either scsi disks or fireware disks. To use fireware you need fireware slots on both the machines. There are two ethernet cards you need one for Private interconnect between the nodes and one for Public. and you need switch, Then you have to connect the shared storage in fireware slots. You need to install the clusterware, before that you can use Openfiler to partition the disk or anything to partition the disk for ocr and votingdisk etc. Then you can install the ASM for Filesystem and Volumemanger for disk and Fra group. Then you can install enterprise agent if you want to use enterprise manager grid control. Then you can install software.

  • Pre-Requirement for Stage Migration in Office 365

    Hi,
    Please help to find the prerequisites or Hardware and software requirement for performing an Stage Migration on office 365.
    Regards,
    Shabu.B

    Hi,
    This forum is to discuss problems of Office development such as VBA, VSTO, Apps for Office .etc.
    Since your issue is more related to the feature of Office 365, as @AK-Azure said, I suggest you posting in
    OFFICE 365 FORUMS for more effective responses.
    Thanks for your understanding.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Requirement doubt

    Hi Friends,
    This is my requirement pls tell me what to fetch as I am not understanding,
    Get the following data from MSEG table against above MBLNR, WERKS-MSEG
    MATNR- Material Number
    WERKS- Plant
    LGORT- Storage location
    Based on the selection screen, first select the list of materials documents from MKPF and look for issue quantity & value  in the MSEG table with SHKZG=H & Plant
    Thanx in advance,
    Regards,
    Venu

    Didnt get why do you want to use them together? Depends on the requirements as you stated in your question itself, if he needs real time data he can go for SLT else can go for BODS. Also depends on how client plans to invest
    Regards,
    Krishna Tangudu

  • Required archive file to do purchase order processing project in oracle soa

    hi,
    im learning oracle soa 11g.i want to do purchase order processing project.but i cant find the pre-required archive files in net.can any one suggest where can i find this file

    Hi,
    Are you using Jdeveloper on a windows machine? If you are then this might be a useful tip.
    Click Tools -> External Tools. It will prompt you to setup common tools. Let it do this. Now when you right click on your project you will get an Explore Directory option. I use this a lot when copying XSD’s between projects.
    Once you have done this you need to click the refresh button in the Application Navigator to ensure the new files appear.
    Robert

  • APEX 3.0 requires PL/SQL Web Toolkit version 10.1.2.0.6 or greater

    Hi All,
    We have just upgraded our APEX 2.2.1 env (running in a 9.2.0.8 database) to APEX 3.1.1 and after that upgrade we realized about the requirement to have web toolkit version 10.1.2.0.6 installed prior to the installation of APEX 3.0.
    Based in this scenario, I have some questions:
    1. Can we install PL/SQL Web Toolkit version 10.1.2.0.6 on a 9.2.0.8 database? Our current PL/SQL Web Toolkit version is 9.0.4.0.6
    2. If so, can we do it now? after APEX 3.1.1 was installed?
    3. What are the problems we could have if we don't install web toolkit v. 10.1.2.0.6?
    Thanks in advance,
    Harvey

    Hi Harvey,
    1.) Yes you can
    2.) Yes you can install it after you have installed APEX 3.1.1 -> because it's independent of the APEX installation, it's just a pre-requirement for APEX to run.
    3.) I think I read one time in the forum that it's required for the region caching feature of APEX. But independent of that, if it's a documented pre-requirement I wouldn't wait until I hit a bug which would required 10.1.2.0.6
    Just my 2 cents
    Patrick

  • Patches and pre-task to upgrade from 12.1.1 to 12.1.3

    I have a few questions regarding to pre-required patches and pre-tasks in order to upgrade from 12.1.1 to 12.1.3.
    Currently, the system is on 12.1.1 and pre-required patch, 9039089 which is for R12.AD.B.delta.3 code level.
    But, when I checked the document, Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]...
    Q1.
    contents deleted.
    However, the document 761570.1 is about the necessary steps of upgrade from 11i to 12.1.3.
    Is this necessary/applicable still for my case as well?
    Q2.
    content deleted.
    However, R12.1.1 already comes with 10.1.2 and 10.1.3 for the application server.
    Is it needed to have these AS10g patches still in this case?
    Q3.
    In short, what patches/steps are needed when I upgrade from 12.1.1 to 12.1.3 after all...? Followings are the ones I identified.
    9239089
    9239090
    9239095
    9817770
    9966055
    So, is it sufficient to apply 9239089 for R12.AD.B.delta.3 code level, and continue with 9239090 (12.1.3 pack patch)?
    Thanks in advance for the help.

    Please follow note 1080973.1 and perform all patching on the forms, web and database tiers. There are a number of patches to apply to meet the requirements to upgrade.
    Please follow R12.1 Oracle Financials Critical Patches note 954704.1 for post install critical patches on top of 12.1.3.
    You will also need to follow support note HRMS (HR Global) Legislative Data Patch 145837.1 if implemented.
    If you use Patch Wizard then you will need to apply patch 10629956. Please review New Required Patches for Patch Wizard, Patch Manager, and Oracle Application Change Management Pack note 1267768.1.
    For best results and all steps recommended by support, please download the Maintenance Wizard tool. This tool will automate most of the upgrade steps and guide you step by step, only applying patches that are required for your installation.
    Maintenance Wizard Overview note 215527.1

  • OCS Voice Mail

    Users in our organization have encountered a peculiar problem with the Voice Mail playback feature of OCS over the phone, which affects long voice mail messages. The problem is as follows: Long voice mail messages play for about 10 seconds. Then, they go into a silence pause of seven seconds. After the pause, the messages resume playing to completion. No part of a message is lost during the pause.
    We are running OCS on two Redhat Linux servers, plus the customary Windows telephony server. The PBX is a Cisco CallManager Version 4.1
    Any ideas as to how to deal with this problem will be greatly appreciated.
    Eduardo Bedoya @ Muskegon County, Michigan

    The configuration of our OCS implementation required 3 servers. Two servers running Redhat Enterprise 3.1. One for the Collaboration Suite infrastructure and the other for the database. The third server is a Windows 2000 server that is configured with the telephony cards.
    Under the advise of Oracle, we contracted with a consulting company, who in turn subcontracted with an integrator. The integrator brought in a third party to configure the telephony server.
    The jury is still out regarding this implementation. We are still having some issues with the system, but need to bite the bullet and continue forward with the project. In addition, besides being expensive, the integrators make the process sound rather complex.
    I would recommend that you do extensive research with the help of Oracle before you embark on a project like this.
    If you further questions, please contact me at your convenience.
    EB

  • OCS Voice Menu

    Is OCS Voice menu available in different languages (spanish) or just english?

    The configuration of our OCS implementation required 3 servers. Two servers running Redhat Enterprise 3.1. One for the Collaboration Suite infrastructure and the other for the database. The third server is a Windows 2000 server that is configured with the telephony cards.
    Under the advise of Oracle, we contracted with a consulting company, who in turn subcontracted with an integrator. The integrator brought in a third party to configure the telephony server.
    The jury is still out regarding this implementation. We are still having some issues with the system, but need to bite the bullet and continue forward with the project. In addition, besides being expensive, the integrators make the process sound rather complex.
    I would recommend that you do extensive research with the help of Oracle before you embark on a project like this.
    If you further questions, please contact me at your convenience.
    EB

  • Oracle AIX pre-requist script controls

    Dear Oracle fellows
    I would like to know if it is possible to use the pre-checks built in OUI in a command line script for AIX in order to control the swap, the bos packages and etc values.
    Any idea?
    Thanks

    Before 10g there was a special unix script for checking pre-requirements.
    You can check metalink Note 189256.1 "UNIX: Script to Verify Installation Requirements for Oracle 8.0.5 to 9.2 versions of RDBMS
    As oui is java, then probably You can try to debug which jar files and what parameters are executed in order to check are all packages installed.
    Or simply make Your own script based on my mentioned one, just add needed checks for concrete operating system.
    But why can't You simply run ./runInstaller and then just adjust if something is forgetted.

  • Regarding the FI extraction

    can any one tell me /send me the procedure to extract FI data sources data to BI/BW.
    HOW TO CREATE FI DATA SOURCES.
    I WANT STEPS
    WHAT R THE PROCEDURES   to analyze business requirements, leverage pre-existing SAP BI content, and  to design best practice solutions to extend the BI platform to meet OCs integration requirements. 
    what r the steps to be taken for publishing BI output to Enterprise Portal.

    Hi there,
    Which tables do you want to use for FI datasource?
    We have standard datasources in FI like
    0FI_AR_4 - Line Item Data for Account Receivables
    0FI_AP_4 - Line Item Data for Account Payables
    0FI_GL_4 - Line Item Data for General Ledger
    check the fields and if required try to enhance as per the requirement.
    Regards,
    Rajdeep.

  • Problem building Client JVM on RedHat Linux 7.1

    Hi :)
    I am trying to build the client VM on RedHat Linux 7.1. I have religiously followed all the pre-requirements, making sure that I meet them all.
    Nevertheless, I get a bunch of error messages. They are divided into two categories:
    - "cannot convert int * to socklen_t * in various methods in the file src/os/linux/vm/hpi_linux.hpp
    - "class blah is implicitly friends with itself"; this one happens in various souce files, e.g. /share/vm/ci/ciObject.hpp
    Any ideas?
    Thanx :)
    Nikitas

    nikitas25 posted a message on March 17, 2002, about trying to build the HotSpot client on a RedHat 7.1 box and receiving a number of errors about:
    - "cannot convert int * to socklen_t *"
    - "class <blah> is implicitly friends with itself"
    I've been trying to build HotSpot 2.0 client on RedHat 7.3 and getting the same error messages starting with this file: src/share/vm/runtime/classLoader.cpp
    In function `int hpi::accept (int, sockaddr *, int *)':
    ....src/os/linux/vm/hpi_linux.hpp:84:
    cannot convert `int *' to `socklen_t *' for argument `3' to
    `accept (int, sockaddr *, socklen_t *)'
    In file included from ../generated/incls/_classLoader.cpp.incl:169,
    from ..../src/share/vm/runtime/classLoader.cpp:18:
    ....share/vm/ci/ciTypeArrayKlassKlass.hpp:22: class `ciTypeArrayKlassKlass' is
    implicitly friends with itself
    Has anybody else experienced this problem? If so, what did you do to fix it?
    I've tried with gcc-2.96-110 and gcc-3.1.1 along with jdk-1.3.1 and j2sdk-1.4.0 and no combination of the compilers works.
    Jeff

Maybe you are looking for

  • Can someone please help me?  I am having trouble activating my iPhone.

    I attach my iPhone to my computer through the USB and the cradle. iTunes opens fine and it shows my iPhone. When the iPhone window opens I get the following error. We could not complete your iTunes store request. The network connection timed out. Mak

  • Is there a way to interface HTML buttons and responses to Labview

    Hi all. I am a long term Labview user, but this is an area I am relatively new to. Ultimately, I want to get an iPad to receive live streaming video from a Labview program running on a PC over wireless Ethernet. Buttons on the iPad should trigger eve

  • How to fit image in oracle report

    HI, I have a report developed by report builder "oracle 10g". the report has an image and I read the path of the image on run time and draw it using a field. the problem is that the image not fit on the field area. and not stretched to the whole area

  • Pint out different than monitor image

    The print outs I get with Lightroom look competely different than any other program's printouts including Adobe Photoshop CS2. The color is not the same. I assume this relates to color management, but I set up the monitor and Photoshop seems fine. Li

  • Help is needed in JSF development

    Hi i am trying to develop a simple JSF application,that work fine with sun application server9.when i use tomcat it starts throwing following exception... java.lang.NoClassDefFoundError: javax/faces/context/ExternalContext please can anybody tell me.