OCT settings to pre-populate user name/initials and accept Outlook autodiscover settings?

In the interest of a better user experience and reduced support calls, I'd like new Office installations to be as hands-off as possible.  With the Customization Tool, I've gotten 99% of the way there.  There are just two items remaining:
When opening the Office components for the first time, the user is prompted for a name and initials.  I'm already putting those into system variables.  How can I use OCT to prepopulate those values and eliminate the dialog box?
We have autodiscover configured for our Exchange 2007 installation, and that works without issue.  On first opening Outlook, the user is prompted to "allow this website to configure
emailaddress server settings?" and an option to not ask again.  How can I use OCT to eliminate this dialog by accepting the setting and not prompting again?

Configure a silent installation of Office 2013:
http://technet.microsoft.com/en-us/library/dd630736.aspx
Flynn

Similar Messages

  • Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard

    MDT 2012 U1
    Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
    I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
    We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
    The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
    But since we use the fields they must still  be fuctional just not seen.
    Thanks.....
    If this post is helpful please click "Mark for answer", thanks! Kind regards

    You shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
    Example:
    [Settings]
    Priority=Default
    Properties=MyCustomProperty
    [Default]
    OSInstall=Y
    SkipCapture=NO
    SkipAdminPassword=YES
    UserID=<MyUserID>
    UserPassword=<MyPassword>
    UserDomain=<MyDomain.com>
    SkipProductKey=NO
    SkipComputerBackup=YES
    SkipBitLocker=NO
    -Nick O.
    Nick,
    SkipAdminPassword=YES is for:
    You can skip the Administrator Password wizard page by using this property in the
    customsettings.ini.
    I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
    DomainAdminPassword=xxxxx
    DomainAdminDomain=xxxxxx
    JoinDomain=xxxxxx
    If this post is helpful please click "Mark for answer", thanks! Kind regards

  • Getting user name, date and time into 1 field

    Hi All,
    I have to add a new field in a customising include of AUFK table. This field should have user name, date and time. How do I store all these values in a single field of the table? Please help.

    Ok Thanks all. Will try your suggestions. But there is one problem. As i have already mentioned that i will have to display this detail in one field of the table control, The format of display is: user name should be seen above and the date and time separated by space should be displayed below the name. How can i ultimately display this in the table control. Do i have to create 2 different fields (one for name and other for date and time) in the AUFK table or is there any other solution?
    Thanks

  • When i try to download firefox i get a popup with user name administrator and looking for apassword

    when I try to download firefox I get as far as extracting then I get a popup saying that I may not have the necessary permission to access all the features of the program I get 2 choices 1 to run the program as the current user 2 I am given user name administrator and it looks for a password.When I try a password I get login failed bad password. When I try to run it as current use it will still not download

    SAVE the installer to your hard drive (do not use the "Run" option); save it to your Desktop so that you can find it. When the download is complete, close whatever browser you have open, click or double-click the file you downloaded and see if it installs without a problem.
    The downloader is a self-extracting archive and should not need or use 7-zip. I have 7-zip installed on my system and it does not interfere with nor is it used in the Firefox install process. Hopefully, you have not set the downloading of .exe files to be associated with 7-zip.
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • My user name/email and password are not recognised. I a...

    my user name/email and password are not recognised.
    I am looking for someonw to tell me why.
    preferabley someone to talk to.

    Hi there!
    For formal (perhaps including live) support, your carrier is your first stop -- they are responsible for all of your formal support.
    In the support forums, we can provide you with much user-to-user assistance, but it means that you need to come to the forums and register an account. Please come to:
    http://supportforums.blackberry.com/rim/
    and register an account. Then post to the applicable forum.
    Thanks!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I cannot conect to APP Store. I upgraded to IOS 8.3 and APP Store has not worked since. I am being asked to tipe my user name /password and nothing happens afterwards. No error messages either.

    I cannot connect to APP Store. I upgraded to IOS 8.3 and APP Store has not worked since. I am being asked to type my user name /password and nothing happens afterwards. No error messages either.

    hey the sever is down for the moment try again latter tonight... we have been attepting and i eveen went to the apple store third Street Primonade and alejadnro could not help me he said to try soon
    John

  • I have a 60G classic with a non-functioning center select button. Can I set a specific playlist and change settings by hooking up to my PC and then maintain those settings and that playlist once I go remote?

    I have a 60G classic with a non-functioning center select button. Can I set a specific playlist and change settings by hooking up to my PC and then maintain those settings and that playlist once I go remote?

    I'm having a little trouble understanding the part about your password having to be reset. Why is that happening??
    Let's start with Firefox's settings:
    (1) You can configure the password manager feature on this tab:
    orange Firefox button (or Tools menu) > Options > Security
    There is a checkbox to enable/disable the feature.
    There also is a "Saved Passwords" button to review and remove any passwords you do not want Firefox to keep.
    That tab also has a feature to set a Master Password so that no one can use your saved passwords without knowing the Master Password. You may need to exit Firefox in order for Firefox to ask for that again.
    Related articles:
    * [[Password manager - Remember, delete and change saved passwords in Firefox]]
    * [[Use a Master Password to protect stored logins and passwords]]
    (2) Site-specific permissions
    If you want to use the password manager for other sites but NOT a particular site, you can configure that in the Permissions Manager.
    In a new tab, type or paste '''about:permissions''' in the address bar and press Enter.
    After the page loads, use the search box in the upper left corner to narrow down the list to the site you want to configure. Highlight the site on the left side, and on the right side, choose Block under Store Passwords.
    (3) Form autocomplete suggestions
    Separate from passwords, Firefox remembers entries you've made into forms (in most cases) and lists the matching ones below the form field in a drop-down.
    To clear a suggestion, press the down arrow key to highlight it and press the Delete key.
    To turn off this feature, see this article: [[Control whether Firefox automatically fills in forms with your information]].
    To review and selectively edit or delete form history entries, you need an add-on. For example, you could try this one: https://addons.mozilla.org/firefox/addon/form-history-control/

  • Populate User Name from Sharepoint Server to Certificate

    Hello:
    I work for a govt contractor and we are loading our CBT on a Sharepoint server. The server guys have created a hidden field within my HTML file called
    Input html ID: CBTUserName
    So when the user accesses the CBT from the Sharepoint Server (which is NOT an LMS) their User Name populate.
    Now I need to get that user name to populate in the Certificate so that users are NOT required to type their name. Our customer (military) does NOT want to ask users to type in their name they want it automatically populated from accessing the CBT through the server.
    HELP- I am a beginner and don't know where to start or what to do.
    Thank you!

    Oh and you can email me directly at [email protected]
    I appreciate any help I can get.

  • USER NAME, SURVEY AND PASSWORD ??

    WHATS THE DEAL WITH THE SURVEY WHEN U USE UR USER NAME AND PASSWORD ON VERIZON CENTRAL??  AS IF I HAVE ALOT OF EXTRA TIME ON MY HANDS TO ANSWER UR STUPID QUESTIONS!!  AND U STILL HAVEN'T GOT MY BILL RIGHT YET, AND ITS OVER A YEAR NOW!!  THE ACCOUNTING DEPT AT VERIZON IS WORTHLESS, AND SO ARE THE PEOPLE AT THE LOCAL STORE WHERE U HAVE TO SIGN UP TO WAITED ON, WHEN THERE ARE 10 PEOPLE STANDING AROUND DOING NOTHING AND THEIR IS A CLIP BOARD WHERE CUSTOMERS SIGN UP TO GET WAITED ON, WITH 3 NAMES ON THE LIST, AND IT TAKES 30 MINUTES TO GET ANY SERVICE!!!  THEY WILL TELL U THAT THEY ARE ON FULL COMMISSION AND DON'T CARE WEATHER U GET WAITED ON OR NOT !!  IF U DON'T LIKE IT, MAIL IT IN !!  THEY DON'T WANT TO GIVE U ANY SERVICE WITHOUT MAKING ANY MONEY TO DO IT, AND I CAN'T BLAME THEM, WHAT A CHEAP OUTFIT !! 
    THAT'S AT THE BRANDON, FLORIDA STORE IN THE REGENCY PLAZA ON ST. ROAD 60 .  THEY WILL ASK U IF U WANT 3 FREE MONTHS OF MOVIES, TELL THEM " NO" AND THEY SIGN U UP FOR IT ANYWAY!!!  TRY AND GET IT CANCELLED, LOL, IT TOOK MONTHS FOR ME TO GET VERIZON TO SHUT IT OFF AND I DON'T EVEN WATCH HBO !!  EVEN IF IT IS FREE!!  THE BILLS WERE ALL SCREWED UP , AND HAVEN'T BEEN RIGHT IN OVER A YEAR!!  THEY EVEN TURNED MY SERVICE OFF, 3 DAYS AFTER I PAID MY BILL IN FULL !!  I KNOW THE GUY IN OKLAHOMA WHO IS ON THE SWITCH TO TURN MY BOX  ON AND OFF, BY NAME AND PHONE NUMBER!!  I KNOW THE NAME OF THE SUPERVISOR IN TEMPLE TERRANCE, FLORIDA BY NAME.  I WANT VERIZON TO PUT ME ON THE PAYROLL AND SEND ME PAYCHECKS FROM NOW ON, AND NOT WORK THERE, JUST BE ON THE PAYROLL,
    LOL!! LOL!!!  AND MAKE IT A 6-FIGURE JOB TOO!!  THEY WILL NEVER FIGURE OUT I DON'T WORK THERE!!  I ASK FOR A NEW ROUTER TO BE SENT TO ME FROM TECH SUPPORT, 20 DAYS LATER, 2 UPS TRACKING NUMBERS LATER, NO ROUTER!! I HAD TO HAVE A SERVICE TECH IN A TRUCK BRING ME ONE IN PERSON, THE METHOD DOESN'T WORK, SOMETHING WRONG WITH THAT PICTURE!!!  ITS A REAL JOKE!!  LOL!!  ALL I CAN DO IS LAUGH LOL!!   AND LIE, WELL THEY ARE VERY GOOD AT DOING THAT!!  YOUR CONTRACT NEVER SEEMS TO EXPIRE WITH THESE PEOPLE, ITS JUST GETS EXTENDED MORE AND MORE, SO U ARE WITH THEM FOREVER !!  GOOD TICK, I WILL HAVE TO REMEMBER THAT ONE!!    CYA!! 

    Tools > Options > Security > Saved passwords

  • Allow users to manage and change Automatic Update settings

    Server SBS 2011 SP 1
    Couldn't find a thread that helped. Hoping to get some light on my situation.
    The client has users who they'd like to have full control of their client PCs Windows Automatic Updates. The users would like to go into Control Panel and check updates at will, set times for auto updates to their liking. I haven't found the appropriate
    GPO setting to allow users to change update settings. 
    Is that possible? Will creating an OU without a linked GPO and blocking inheritance provide the answer? 
    Thanks ALL! 

    Server SBS 2011 SP 1
    The client has users who they'd like to have full control of their client PCs Windows Automatic Updates. The users would like to go into Control Panel and check updates at will, set times for auto updates to their liking. I haven't found the appropriate
    GPO setting to allow users to change update settings. 
    Is that possible? Will creating an OU without a linked GPO and blocking inheritance provide the answer? 
    the dedicated SBS forums might bet better for your question (since SBS can be finicky about some settings)
    https://social.technet.microsoft.com/Forums/en-US/home?category=sbsserver
    It will likely depend upon how the implementation is currently setup (there could be various things in place, in a customised fashion).
    Basically, when using GPO to deploy WUAgent settings for WSUS, the user interface for WU is disabled for the end-user - this is how classic domain GP works, and is intended to work. (i.e. if the domain admin deploys a setting, end-users are unable to change
    that)
    You may be able to easily identify the relevant domain GPO that is delivering this setting, but you would (presumably) want to only change the single setting relating to AUOptions, and leave the other settings as they currently are (i.e. continue to use
    WSUS to serve the update approvals and update files/patches.
    Creating a new OU and not linking/inheriting, may cause other unintended effects/complexity.
    (it might be the only way to achieve your goal, but analysing which GPOs are carrying which settings, and then which GPOs you *do* need to be linked/inherited, will be an important step)
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • How to detele a User name form Check list outlook 2010

    Hi,
    I have deteled the user form EMC and AD , but whe I'm trying to send an email to another user and I press ''Ctrl + K '' (chech names) the deteled user is still there. I pressed 'detele' but at the next email creation is still there. How I can detele
    it from that list???

    Maybe this one helps.
    Removing unwanted names from Outlook's "To..." line
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Cant find my user name/password and I'm told it's been sent to my e-mail...after 3 days no e-mail.

    I'm pretty furious. For days I've been attempting to contact anyone @ Mozilla/firefox. Reason: Last week I downloaded Firefox to replace IExplorer. Everything seems to work fine...EXCEPT...e-mail. E-mail via att.yahoo.com. It runs hideously slow. (It didn't do that w/ Internet Explorer.) I need to know how to fix it.
    When I've attempted to access support through Firefox "Get started..." "Get help"....etc. I've been requested to furnish "user name" and "password." Since I misplaced both, I requested Firefox to send it to me. The response I got was "...an e-mail (containing that information) "was sent to the e-mail location" I furnished.
    NOPE!! After several days and multiple access each day.....no e-mail from Mozilla/Firefox.
    At this point I'm about to share my experience w/ CNET and PC Mag. I must remind you that I'm about half computer stupid...but I learn easily.

    Since this message appeared here ([https://support.mozilla.org/questions/1018860]), I think that means your support account is active now and that you are successfully logged in. If you use the Edit Profile link, can you find the email account the site is using?
    https://support.mozilla.org/users/edit

  • Once we download it brings up a box that says "Run as" and has User name: Administrator and a box for Password. We can't get past this point. What do we do?

    we tried to dowload Firefox and it tried to run..it then brought up the box that states Run as at the top. It says: You may not have the necessary permissions to use all the features of this program you are about to run. You may run this program as a different user ot continue to run the program as the current user.
    Current user(Owner-PC\Owner)
    Run the program as the following user:
    User name: Administrator
    Password:
    ok cancel

    Make sure that you do not run the Firefox directly via the download dialog in IE, but save the file to the desktop and start the installation with a double-click.
    You may need to use "Run as Administrator" via the right-click context menu if you do not get a UAC alert.

  • 2nd gen appletv says movies not authorised/ user name/password not accepted on appletv

    This is so weird.
    I have home-shared and can play all un-DRM stuff e.g. music and personal movies. However, TV shows and Movies downloaded from iTunes won't play. It keeps asking me to authorize my computer on iTunes. The computer is however authorised and just to be double sure I have authorised multiple times (and get the message "this computer is already authorised"). I also de-auth'd and re-auth'd. This is all after updating both the AppleTV and iTunes to the most up-to-date versions.
    This is all happening with a Win7 PC so I home-shared from my Mac as well and exactly same thing. One other strange thing: I tried to sign in to iTunes on the AppleTv, just in case thats what is needed to get these things to play. It tells me my user name/ password is incorrect. This is the weirdest because it is the exact user name password I used to home-share and even buy the last TV show. I have repeatedly entered it so I am dead sure I have not entered it wrongly.
    Has anyone encountered and fixed something like this? Cold rebooting also has no effect at resolving.
    Thanks

    My id/password combo is ok - 100% sure.
    Took the bold step of resetting to factory defaults. Now it doesn't even sign in to itunes sharing from the AppleTV anymore: says id/password wrong. It was only iTunes saying this before. So now I can't even access stuff on my PC anymore. Yet at this very moment I'm downloading a movie on iTunes on the computer meaning I will only be able to see it on the computer.
    Quite disappointed in Apple!

  • User name change, and now my settings are gone...

    I clicked on Finder, and saw that my username was a____s_______ (which is my full name spelled out). As anal as I am, I wanted everything spelled with capitalization, so I left clicked, selected "Rename a____s_______" and proceeded to type is out like so: A___ S______.
    Everything was going great until I clicked on iTunes and it acted like I was a brand new user. My personal music and playlists are nowhere to be found. Same is the case in iPhoto, and upon restarting, I'm back to a beautiful Mac blue desktop background like Day 1.
    I know my iTunes, etc. still exist--if I click on Macintosh HD and then Users, under my old name (a____s_______) is a folder containing all my music, pictures, etc. in folders. Technically, I could drag everything into it's place, but besides the immense time block that would take, I don't know how to get back all my other settings (desktop, dashboard, widgets, address book, etc.).
    Does anyone know of a quick fix to this? It's a little irritating--so close yet so far away, you know?!
    Thanks in advance for any help you can offer.

    Drag the "unwanted" Library folder to the Desktop. Move the Library folder you want to the proper location. Restart the computer. If all is well you can then delete the Library folder that's on the Desktop.
    This is necessary because some items are "in use" when you startup. You cannot delete a folder if it contains items "in use." Once you replace the folder and restart the old folder will no longer have anything "in use" and can be dumped.

Maybe you are looking for