OData Source Component for SSIS 2012 for OData v4
Is there any word on an OData Source component for OData v4?
So far as I can tell, the recently released version only supports OData v2 and v3.
Hi Schreckick,
According to your description, you want to use OData Source component for Odata V4 in SSIS, right?
Based on my research, this is not support currently as Arthur said. If you have any concern about this feature, you can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback and hope it is resolved in the next release of service pack or product. Your feedback enables Microsoft to make software and services the best that
they can be, Microsoft might consider to add this feature in the following release after official confirmation.
Thank you for your understanding.
Regards,
Charlie Liao
TechNet Community Support
Similar Messages
-
Error when trying to use excel source editor in SSIS 2012
I am using SQL Server 2012. This error occurs when I try o select the name of excel sheet in excel source editor in SSIS 2012. I am on win 7 64 Bit machine. I have office 2010.
Could not retrieve the table information for the connection manager 'Excel Connection Manager'. Failed to connect to the source using the connection manager 'Excel Connection Manager'.
Thanks in advanceHi Satya, I even tried installing 32-bit ACE OLE DB providers even before posting this and I do not have permissions
to install it on my machine. I will work with IT Dept and update the status on how it goes.
Thanks -
Is there a photo voltaic power source component for multisim 11?
i am looking for a component for a photovoltaic cell source.does multisim 11 have anything like this.
the best explination of the curcuit equivalent of a photo(solar cell) seems to be found in wiki
solar cell perameters to out put current and voltage
I = output current (amperes)
IL = photogenerated current (amperes)
V = voltage across the output terminals (volts)
RS = series resistance (Ω).
I0 = reverse saturation current (amperes)
n = diode ideality factor (1 for an ideal diode)
q = elementary charge
k = Boltzmann's constant
T = absolute temperature
RSH = shunt resistance (Ω)
then the edffected based on physical size of the cell
J = current density (amperes/cm2)
JL = photogenerated current density (amperes/cm2)
J0 = reverse saturation current density
(amperes/cm2)
rS = specific series resistance (Ω-cm2)
rSH = specific shunt resistance (Ω-cm2).
not sure if this helps i will check with my professor on this matter as well. -
SSIS 2012 - Double quote charcter in data does not allow to load flat file to source component
Hello everyone,
I've created a source component for flat file data.
This file contains data the column data in double quotes. Like,
First Name Last Name
"Ankit" "Shah"
The text qualifier is double quote for source file connection.
When I do have data like below, it does not able to load the source file. And throws an error "The column delimiter for column was not found"
First Name Last Name
"Ank"it" "Shah"
Can anybody please advise how to resolve this problem?
Any help would be much appreciated.
Thanks,
Ankit
Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.comPlease refer:
http://visakhm.blogspot.com/2014/06/ssis-tips-handling-embedded-text.html
http://www.ideaexcursion.com/2008/11/12/handling-embedded-text-qualifiers/
Cheers,
Vaibhav Chaudhari
[MCTS],
[MCP] -
The binary code for the script is not found error for the Script component - SSIS 2012
Hi,
I'm implementing a SSIS 2012 pkg. For a data flow task, I'm using a Visual Basic 2010 script component with an Oracle input flow. For the script component I've an input column and I've created an output column. Inside the script code I've edited only inside
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer).
The written code is:
If Year(Row.OFFDATAORI) < 1900 Then
Row.OFFDATAORIconv = CDate(CStr("1900" + "-" + Right("00" + CStr(Month(Row.OFFDATAORI)), 2) + "-" + Right("00" + CStr(DatePart(DateInterval.Day, Row.OFFDATAORI)), 2))
Else : Row.OFFDATAORIconv = Row.OFFDATAORI
End If
It is to note that OFFDATAORI isn't the name of the input column for the script component.
When I close the script component I've an error about "The binary code for the script is not found".
Any helps to me, please?
ThanksHi,
I've solved. There was a syntax error, a bit hidden.
Bye -
Hi,
I am using OLE DB Source to fetch the records with Data Access Mode as SQL COMMAND which is using the below query with a parameter,
SELECT CON.Title,CON.FirstName,EMP.MaritalStatus,EMP.Gender,EMP.Title AS Designation, EMP.HireDate, EMP.BirthDate,CON.EmailAddress, CON.Phone
from HumanResources.Employee EMP INNER JOIN Person.Contact CON ON EMP.ContactID=CON.ContactID WHERE EMP.Title in (?)
In this query for the parameter I am passing the value from a variable and which is configured (XML Configuration). While passing value
Buyer it works correctly. But while passing values Accountant,Buyer
it is not working as expected.
How to handle while passing such multiple values Or is it possible to pass such values or not in SSIS 2012 ?
Kindly help me to find a solution.
NOTE: I placed the whole query in a variable as a expression as below it is working fine.
"select CON.Title,CON.FirstName,EMP.MaritalStatus,EMP.Gender,EMP.Title AS Designation,EMP.HireDate,EMP.BirthDate,CON.EmailAddress,CON.Phone from HumanResources.Employee EMP
INNER JOIN Person.Contact CON ON EMP.ContactID=CON.ContactID WHERE EMP.Title in ('" + REPLACE(@[User::temp],",","','") +"')"
Any other solution is there ? without placing the query in a variable. May be a variable can have some limitations for no. of characters stored not sure just a thought.
SridharPutting the whole thing into a variable is certainly a valid solution. The other involves putting the comma delimited list into a table valued variable.
http://gallery.technet.microsoft.com/scriptcenter/T-SQL-Script-to-Split-a-308206f3
For an odd ball approach:
http://www.sqlmovers.com/shredding_multiline_column_using_xml/ .
Russel Loski, MCT, MCSE Data Platform/Business Intelligence. Twitter: @sqlmovers; blog: www.sqlmovers.com -
Can SSIS 2012 execute packages built on 2008 R2 BI for 2008 R2 SQL Server?
We have a query regarding SSIS instalattion on application server. As SQL Server 2008 R2 is getting out of life, DBAs are suggesting to install SSIS 2012. Now our concern is
that our SQL Server DB Server is on 2008 R2, and developers are building packages using SSIS 2008.
Considering we deploy file packages, and backward compatibility, theoretically it shall work. There are 3 things here -
1. {2008 R2 SSIS Package} ------ Deployed On -------> 2. {Server with 2012 SSIS installation} ------- Connects to -------> 3. {SQL Server 2008 R2 DB Instance}
Any recommendation on this. Would it work? Anything which could cause issue?
As we have to pay for license, do not want be in a situation where we pay for SSIS 2012 installation on server (#2 above) and then realize that there is some issue
Regards, Amit GuptaHi Amit,
Just as Visakh and hsbal said, there will be no issues as SSIS 2012 will work with standard previous versions of SQL Server packages. But some custom SSIS Tasks can always throw error after upgrading packages from SQL Server 2008 R2 to SQL Server 2012.
About this, please remember to do the following things:
Change your custom tasks and components to target the .NET 4.0 Framework in each of the project properties, in the Application Tab, under Target framework.
Update the assembly references in each of your projects to point to the appropriate SqlServer dlls.
Build and copy your project dlls to the appropriate directory, depending on what kind of components you are updating, i.e. Program Files (x86)\Microsoft SQL Server\110\DTS\PiplelineComponents
Register your components in the GAC.
Close Visual Studio and then reopen; open your SSIS packages and refresh the SSIS Toolbox, by right clicking in the tool box and selected Refresh Toolbox.
Besides, if some of your script task throw errors to you, we can open the script task in VSTA, insert Breakpoint to debug the scripts, then find the root cause. For more details, please see:
Debug a Script by Setting Breakpoints in a Script Task and Script Component
For more detailed information regarding to the license issue, please call 1-800-426-9400, Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist. For international customers, please use the Guide
to Worldwide Microsoft Licensing Sites to find contact information in your locations.
You can also visit the following site for more information and support on licensing issues:
http://www.microsoft.com/licensing/mla/default.aspx
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support -
Hi,
I have a solution with 20 packages. Target Database is same for all the packages, only target tables are different. All are working fine.
Now,as part of a new requirement,I have to change some logic in one of the packages.I have to create few 'Global Temp Tables' on the fly and populate some data into it and use those tables for update and delete in both control and data flow.
Since I am creating and using Global tables on the fly, I have to set up 'Delay Validation = True' for the package and the DFTs.
Then, most important thing is, I have to set up 'Retain Same Connection = True' for the 'Target database' connection because only then, I assume,the package will not throw errors like 'Tables are not available'.
My doubt is, if I change the Retain Same Connection = True, will it create any issue for the other packages, as all other packages are using the same connection manager.
I am using SSIS 2012.
Thanks for your help!
Although 'RetainSameConnection' is a property of the Project Connection Manager, it only works within a package, but as soon as an other (child) package starts, you will loose the connection.
Safest option is probably to use a separate package connection manager.
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter -
When will SSDT-BI for VS2013 support SSIS 2012?
Hi
When will SSDT-BI for VS2013 support SSIS 2012?
Of a bit more elaborate: If you would like to develop packages for SSIS 2012 (that is SQL 2012) using VS 2013, when can you then expect an update to SSDT-BI for VS2013 that allow this?
Thanks
MichaelHi Michael,
The Microsoft SQL Server Data Tools - Business Intelligence for Visual Studio 2013 is the native SSDT of SQL Server 2014. Be different from SSRS and SSAS projects, SSIS projects created in SSDT (SQL Server 2012 version or SQL Server 2014 version) are not
backward compatible. So, it won’t be supported to create SSIS 2012 format packages in Microsoft SQL Server Data Tools - Business Intelligence for Visual Studio 2013.
There are already two versions of SSDT for SQL Server 2012: the native one that uses Visual Studio 2010 shell, and the
standalone one that uses Visual Studio 2012 shell. Personally, I don’t think they will plan a third version of SQL Server 2012 SSDT that uses Visual Studio 2013 shell.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support -
Major Bug in SSIS 2012 Script Component - Potentially
I think there is a major issue with the Script Component in SSIS when running SSDT on Windows 8.1. I have a Script Component that functions as a data source. The script compiles successfully. However, when returning back to the Data Flow Task, I still get the
following error which I'd get when an error exists in the Script.
Validation error. Data Flow Task Script Component [2]: The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully.
The script compiles successfully so this is frustrating. This is incorrect and I believe it's an issue with SSDT/SSIS when run on Windows 8.1. I've applied SQL Server 2012 SP1 with CU7 and the error still exists. Can someone else confirm this as
a bug?
<a href="http://martinsbiblog.spaces.live.com" target="_blank">http://martinmason.wordpress.com</a>I'm simply doing the following:
Add a Data Flow Task.
Add a Script Component. Configure as a Source.
Double click on the Script Component.
Click on the Edit Script button.
Compile the script. Compiles successfully.
Close the VSTAProject editor.
Close the Script Component properties page.
When returning to the Data Flow, the "Binary code for the script is not found" error is return
Running as an Administrator did not solve the problem. Again, this is only an issue with SSIS on Windows 8.1 so if you're not running on Windows 8.1, do not bother replying. I've applied SP1 and CU7 and the problem was not resolved.
Really regretting upgrading to Windows 8.1.
<a href="http://martinsbiblog.spaces.live.com" target="_blank">http://martinmason.wordpress.com</a> -
CDC SSIS 2012 ,CDC TASK,CDC Source,CDC Splitter
Hi,
I tried CDC in SSIS 2012 yesterday I was unable to run the hole process sucessfully
http://www.mattmasson.com/index.php/2011/12/cdc-in-ssis-for-sql-server-2012-2/?utm_source=rss&utm_medium=rss&utm_campaign=cdc-in-ssis-for-sql-server-2012-2--------------------------------------------------------------------------------
did any one tried this process
Sri.Tummalasorry my sql server agent is turned off i have to turn it on
after turning it on i trie dto run the package it gave following errors in data flow
[CDC Source [2]] Error: "Value ILUPDATE/CE/0x00078CD5000023D20001/IR/0x00078CD5000023590002//TS/2012-05-24T14:12:15.0476569/ of CDC state User::CDC_State is not well structured. Structure must be - logicalName(required)/[CS/<cs-lsn>/](optional)[CE/<ce-lsn>/](optional)[IR<ir-start>/<ir-end>/](optional)/[TS/timestamp/](optional)[ER/<error-message>/](optional).".
[CDC Source [2]] Error: System.Exception: Value ILUPDATE/CE/0x00078CD5000023D20001/IR/0x00078CD5000023590002//TS/2012-05-24T14:12:15.0476569/ of CDC state User::CDC_State is not well structured. Structure must be - logicalName(required)/[CS/<cs-lsn>/](optional)[CE/<ce-lsn>/](optional)[IR<ir-start>/<ir-end>/](optional)/[TS/timestamp/](optional)[ER/<error-message>/](optional).
at Attunity.SqlServer.CDCSrc.CdcSourceComponent.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper100 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer100[] buffers, IntPtr ppBufferWirePacket)
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on CDC Source returned error code 0x80131500. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure
code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Sri.Tummala -
How adding a data source-data destination inside SSIS 2012-SSDT
Hi,
I need to see inside a SSIS 2012 project a new SSIS installed component but in the SSDT 2010 I cannot see the SSIS Data Flow Items tab for adding data source/data destination respect to the choose toolbox items pane:
It seems a SSIS bug.
Any helps to me, please?
ThanksHi,
In SQL 2012 you are no longer required to manually pick the tasks and components you want to use. You have to select from the new custom SSIS Toolbox to use the additional components you need.
SSIS Tasks Components Scripts Services | http://www.cozyroc.com/ -
Hi Guys,
SSIS 2012 ETL is failing only at one server (No BIDS) but running successfully from BIDS on different sever . In this ETL, I have used Stored Procedure in OLEDB Source.
Note: I have couple of ETLs developed in 2005 using same logic and upgraded to 2012, working perfectly.
I am getting Error Message:
SSIS
Error Code
DTS_E_OLEDBERROR.
An OLE DB
error has occurred.
Error code: 0x80004005.
An
OLE DB
record is available.
Source: "Microsoft OLE DB Provider for SQL Server"
Hresult: 0x80004005
Description: "Error converting data type varchar to datetime.".
Unable
to retrieve
column information
from the data
source. Make
sure your target
table in
the database is
available.
"OLE DB Source"
failed validation
and returned
validation status
"VS_ISBROKEN".
I tried below word around and found It is working perfectly.
I loaded data into a table (dbo.TEMP) using Stored procedure and then I used this dbo.TEMP table in OLEDB source and then found no issue.
MY SP Details: (This SP I am calling in OLEDB source of ETL) and when I run it from one server IT is working fine and when I run from ETL dedicated Server getting error: Guys Help me out.
USE
[TEST_DB]
GO
SET
ANSI_NULLS ON
GO
SET
QUOTED_IDENTIFIER ON
GO
ALTER
PROCEDURE [DBO].[SP_TEST]
--EXEC [DBO].[SP_TEST] '2014-09-30','2014-10-01'
@FROMDATETIME
DATETIME,
@TODATETIME
DATETIME
AS
SET
NOCOUNT ON
BEGIN
DECLARE
@FROMDATEKEY INT,
@TODATEKEY INT,
SET
@FROMDATEKEY=
CONVERT(VARCHAR(10),@FROMDATETIME,112)
SET
@TODATEKEY=
CONVERT(VARCHAR(10),@TODATETIME,112)
IF 1 = 1
BEGIN
SELECT
CAST(NULL
AS DATETIME)
AS TXN_DATE
, CAST(NULL
AS DATETIME
) AS PROCESS_DATE
, CAST(NULL
AS money)
AS S1_AMT
, CAST(NULL
AS money)
AS S2_AMOUNT
, CAST(NULL
AS money)
AS S2_INVALID_AMOUNT
, CAST(NULL
AS money)
AS INVALID_MOVED_IN_VALID_S2_AMOUNT
, CAST(NULL
AS VARCHAR(20))
AS SYSTEM_ID
, CAST(NULL
AS money)
AS S3_AMT
END
SELECT
TXN_DATE
,PROCESS_DATE
,S1_AMT
,S2_AMOUNT
,S2_INVALID_AMOUNT
,INVALID_MOVED_IN_VALID_S2_AMOUNT
,SYSTEM_ID
S3_AMT
FROM
DBO.TABLE_1
WHERE TNX_DATE_KEY
BETWEEN @FROMDATEKEY
and @TODATEKEY
UNION
ALL
SELECT
TXN_DATE
,PROCESS_DATE
,S1_AMT
,S2_AMOUNT
,S2_INVALID_AMOUNT
,INVALID_MOVED_IN_VALID_S2_AMOUNT
,SYSTEM_ID
S3_AMT
FROM
DBO.TABLE_2
WHERE TNX_DATE_KEY
BETWEEN @FROMDATEKEY
and @TODATEKEY
UNION
ALL
SELECT
TXN_DATE
,PROCESS_DATE
,S1_AMT
,S2_AMOUNT
,S2_INVALID_AMOUNT
,INVALID_MOVED_IN_VALID_S2_AMOUNT
,SYSTEM_ID
S3_AMT
FROM
DBO.TABLE_3
WHERE TNX_DATE_KEY
BETWEEN @FROMDATEKEY
and @TODATEKEY
END
Data Source Mode: SQL Command for Variable
"EXEC [DBO].[SP_TEST] '"+ (DT_WSTR, 24) @[User::V_EXTRACT_FROM_DT] +"','"+ (DT_WSTR, 24) @[User::V_EXTRACT_TO_DT] +"'"
Where variable @[User::V_EXTRACT_FROM_DT] and @[User::V_EXTRACT_TO_DT] is defined as DATETIME
Thanks Shiven:) If Answer is Helpful, Please VoteHi,
Yes you are right. At one sever where I was getting error, DateTime was in USA format and Where It was running successfully was in AUS format.
I changed from USA to AUS and I did another changes:
Data Source Mode: SQL
Command
EXEC [DBO].[SP_TEST]
@FROMDATETIME = ?,
@TODATETIME = ?
and It is working fine.
Thanks Shiven:) If Answer is Helpful, Please Vote -
Adding Teradata source component programmatically in SSIS
Need help to add a Teradata source component programmatically in SSIS . I am able to add the component but the column info and other metadata is not available for subsequent components. Any documentations or suggestion is needed .
What kind of source is it? ODBC? Column info appears after you set the columns up.
Arthur My Blog -
Endpoint Protection error: The source folder for content does not exist.
I have a single SCCM 2012 SP1 CU4 server running on Windows Server 2012.
I have been using this for a little more than a month for Endpoint Protection and Windows Updates.
I just recently started seeing that my Endpoint Deployment Package has Failed. I click on "Content Status" and select the Endpoint package (which again shows Failed). I click on "View Status" and I get this
message in the "Error" tab:
The source folder for content does not exist.
The Asset Details point to the exact location that does not exist:
The source directory "\\<server>\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" for package "<package>" does not exist.
I didn't change anything related to this, and that directory path (\\server\updates\endpoint) is
shared and is populated with a lot of other folders.
Is this possibly just a bad update file? Should I manually create that sub-folder that it says is missing?
Any help would be great! Thanks!Thanks for the quick reply, Torsten. (I often forget which logs to check for certain things).
There are six lines (3 errors -- in italics below) in the log around the same time frame. They read:
The source directory \\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68 doesn't exist or the SMS service cannot access it, Win32 last error = 2 SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM
5920 (0x1720)
STATMSG: ID=2306 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.962 2014 ISTR0="\\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" ISTR1="PDC00063"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063" SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
Failed to take snapshot of one or more contents in package PDC00063 SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=PDC00063, Version=10, Status=2302 SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.990 2014 ISTR0="Endpoint Protection Definition Updates" ISTR1="PDC00063" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063" SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
Failed to process package PDC00063 after 33 retries, will retry 67 more times SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:47 AM 5920 (0x1720)
Maybe you are looking for
-
How to integrate web based application to windows based application
Hi, Experts, we developed web based application in this when we raising invoice document after adding this we need to updated Amount in integratee SAP B1 then that Amount we need Update The Amount in OACT Table how we can Update in Amount Field in
-
Reseting File Sharing Preferences for admin account
Hello: Was recently trying to network my macbook with my brothers Vista laptop. Followed a few websites, could get his pc to access my mac but couldn't access the PC. At any rate -- now I have been getting a lot of permission errors on my macbook. I
-
I used to be able to display pdf documents using Adobe Reader instead of Firefox's built in. I have tried everything that you suggest and that Adobe suggest. I have uninstalled and reinstalled Firefox. I have uninstalled and reinstalled Adobe Reader
-
I installed IOS 7 and now it won't accept my password. How do i fix it?
I finally got around to installing IOS 7 and now my phone won't accept the 4 digit passcode. I didn't think about disabling that feature before the upgrade. Never had a problem before. And yes, I'm sure I'm using the right code. I use it many times p
-
Download data from excel to internal table in CRM system?
Hi Experts, Can we read multiple work sheets from an Excel work book to internal tables in CRM system? Ex.. Work book has 2 work sheets. One header sheet and one item sheet. Can we read this into two internal tables and process the data. If yes, pl