OdiSendMail fails when the session is restarted

Hi All,
I am having a peculiar problem. I use a variable to store the IP address for the SMTP host and use this variable in the ODISendMail command. Now, my package is designed in such a manner that whenever a component fails, ODI shoots off a mail. Things work fine when the a component fails for the first time during the execution of the package.The problem occurs when I restart the session and another component fails. Then ODISendMail fails with the following error:
javax.mail.SendFailedException: Sending failed;
nested exception is:
javax.mail.MessagingException: Unknown SMTP host: 62.172.212.49
How could this be when the command worked with the same parameters during the first invocation? Any help is appreciated.

Hi Steph,
Thanks for the response. Could you please suggest any remedy to the problem? How did you handle it when you faced it? Any help is appreciated.

Similar Messages

Redirect to main jsp when the session expires

Hi,
I have a jsp say mainframe.jsp in which I have two frames each having a jsp page say child1.jsp and child2.jsp.
When the session expires and I when i try do any changes in child2.jsp or child1.jsp, the page redirects to login page and when I login successfully, I am getting redirected to child2.jsp or child1.jsp respectively. But I want it to be redirected to mainframe.jsp.
Any help is greatly appriciated.
Thanks in advance.
Vinod

I think I am not clear.
When I try to login after session expiry, I am redirected to child jsp.
But what I want is that I should be redirected to mainfram.jsp page.
url in the address shows : ../mainframe.jsp?ID=******
When my seesion is expired and I try do some manipulation in child1.jsp (which is inside a frame of my mainframe.jsp). it is redirected to login page and from there to child1.jsp instead of mainframe.jsp
Now the address url shows : ../child1.jsp?ID=********* because of which I am not able to see child2.jsp along with child1.jsp
What I want : ../mainframe.jsp?ID=********
this is the code I am using !!
String destPage = request.getRequestURI();
response.sendRedirect("../redirect.jsp?dest=" + URLEncoder.encode(destPage));

How do I close a connection when the session ends?

I have a website that is using JavaMail to display a user's mail through the browser. I'd like to keep the connection to the mail server open during the whole session that the user is logged in, in order to improve response time. The problem is, I can't detect if a user closes their browser so that I can close the connection to the server.
Is there a way for me to close the mail server connection when the session ends?
Thanks.

Create session listener, Impliment sessionDestryoyed
method with your connection close statements.I was wondering how to use the listener for a Servlet as well, what would you type in that method to close the connection?.
public class ServletListener
     implements
          ServletContextListener,
          ServletContextAttributeListener,
          HttpSessionListener,
          HttpSessionAttributeListener
public void sessionDestroyed(HttpSessionEvent arg0)
          //System.out.println( arg0 );
}

Delete memory Id when the session is still active

Hi all,
Can anyone tell me how to clear the Memory Id when the session is still active.
I am getting the amount value through Memory Id from import and export parameter when I am posting the check. Again if I reprint the check without closing the session the amount value is getting double evertimes.
If I delete from Memory Id I am not able to see any amount value while posting for first time.
Can anyone suggest me how to proceed further.
Regards
Yathish

Looks like you are not clearing the variables before and after that logic. Clear them and try.
Let us if you are doing that or not.
Rgds,
Naren
Message was edited by:
Someneni

[svn] 2692: Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out .

Revision: 2692
Author: [email protected]
Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
Log Message:
Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
QA: Yes
Doc: No
Checkintests: Pass
Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-227
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
blazeds/branches/3.0.x/qa/build.xml

Revision: 2692
Author: [email protected]
Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
Log Message:
Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
QA: Yes
Doc: No
Checkintests: Pass
Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-227
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
blazeds/branches/3.0.x/qa/build.xml

Custom web parts in SharePoint 2013 becomes inactive when the session is idle for long time.

Hi,
We have a search center site with custom web parts and custom master pages. When the session is inactive for long time all the custom web parts in the page doesn't work, unless we close the browser and open it. Where as this is not the case with the
OOB web parts. We are not able to identify the root cause as it works with OOB web parts and not the custom web parts.We were able to find that by increasing the session timeout of the web application we can avoid this issue.We do not want to increase the
session timeout as the OOB web part works perfectly even when the user session is idle for long time.Is there any other alternative where we can acheive the same for custom web parts when the session is idle for long time?
Thanks,
Saranya

Hi Saranya,
According to your descirption, my understanding is that when the session is long time idle ,then custom web part will not work.
I suggest you check if you have enable the session in the Page Level in the web.config. By default SharePoint disable the session state.
In the web.config, you will see <page enableSessionState> tag. You can modify like below and test if it works.
<pages enableSessionState=”true” ….. />
Here is a detailed thread for your reference:
Use Session State in SharePoint
Best Regards
Zhengyu Guo
TechNet Community Support

How does c:url tag know when the session is cookieless and thus to redirect

i have been looking at the source code for c:url tag and can't figure out how they are doing that. I need a way to do that in a jsp, to check if the cookies are allowed or not.

how does c:url tag know when the session is cookieless and thus to redirecthuh?
What do cookies have to do with redirecting?
Cookies get encoded into a URL using the method in HttpServletResponse: response.encodeURL() or encodeRedirectURL().
That method determines whether or not it prints out the session id as part of the url, or it gets uses cookies.
You can try: request.isRequestedSessionIdFromCookie().
If that is true, you know that session cookies are supported (or at least that one was)

Modbus Ethernet Slave seems to fail when the Master query information simultaneously for more than 16 Coils or Discrete Inputs.

I'm developing an control application by using the Modbus TCP/IP for communicating with the host computer.
I'm using the Modbus Library for LabVIEW
(http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=F1582737BACF5CA8E0340003BA7CCD71&p_node=DZ52363&p_source=External).
The LabVIEW MB Ethernet Slave seems to fail when the MB Ethernet Master
query information simultaneously for more than 16 Coils or Discrete
Inputs.
The Modbus Application Protocol Specification (http://www.Modbus-IDA.org) state that:
1- The function code 0x01 'Read Coilsis' is designed to read from 1 to 2000 contiguous status of coils in a remote device.
2- The function code 0x02 'Read Discrete Inputs' is designed to read
from 1 to 2000 contiguous status of discrete inputs in a remote device.
To test the behaviour of the LabVIEW MB Ethernet Slave I have modified
the 'MB Ethernet Example Slave.vi' by adding more Coils and Discrete
Inputs. I have added up ONLY to 20 Coils and 20 Discrete Inputs.
By using the 'MB Ethernet Example Master.vi' the answer to the MB query
is correct for the first 16 Coils or Discrete Inputs. Starting from the
17th Coil or Discrete Input the MB Ethernet Slave doesn't give any
answer.
By shifting the start point address the answer remain correct for the first 16 Coils or Discrete Inputs.
I have tested the slave by using also a third part MB Ethernet Master and the behaviour is the same.
1) There is a reason for this behaviour?
2) There is a Modbus Library for LabVIEW that satisfy the 'Modbus
Application Protocol Specification' managing from 1 to 2000 contiguous
status of Coils or Discrete Inputs?
Thanks,
Asper

I have the same problem with the MB Ethernet.
I need 40 Outputs.
The first 16 work perfectly. The next 8 coils do not work, The next 8 work, The next 16 do not work,The next 8 work,The next 24 do not work And work for the last 8. Conclusion, to activate the 40 outputs, I needed 88 coils.
Because 48 coil, do nothing Can someone help me and i cant implemet the jim solution

Is it possible to auto delete directory when the session expires?

I create a directory for each session based on the unique session id e.g. c:\website\8D143E46EA18FAEFEF4D807180A307E2
Is it possible to auto delete this directory when the session expires?

thanks
i found this great link which teach how to use HttpSessionListener, in case someone has the same problem as me.
http://www.stardeveloper.com/articles/display.html?article=2001112001&page=1

Alert when the session Expires

Hi Everybody,
I am doing a web based application in JSF ,in that I want to make an pop up or an alert message automatically when the session expires.please give me valuable inputs on this regardings...
Thanks in Advance

Hi,
yes...I have tested correctly.But here I am giving <a4j:support> to specify the dropdown listbox action.only for this reason the form is not submitting when I use dropdownlist..for ur reference here is a sample code
<h:selectOneMenu id="animalNameCombobox" value="#{Animal.animalName}" styleClass="sampleDropDownListBox">
                                    <f:selectItems value="#{Animal.animalItemList}"/>
                                    <a4j:support action="#{Animal.animalComboboxAction}" event="onchange" reRender="animalOutputPanel"/>
                                </h:selectOneMenu>I have given all this within <a4j:outputpanel>..Is there any remedies are there to resolve this issue...please give me a valuable inputs and suggestion on this regardings..
Regards

TNSLSNR is failed when the no. of process exceeds.

Hello,
We received a problem like if the process or sessionsis exceeded the no. 150, then the listener got down and error has come like "TNSLSNR is failed ".
but if you kill some process and if the no. process is below 150 then again it will works fine.
That is the case when no. process or the sessons reached to 150 the listener got disbalanced. but in init.ora and spfile , the number of process is 250 and the sessions is 280. I dont know why this problem has come.
please help me.
if you have any idea then please mail me to [email protected]
Thanks
bye
Pranab

But is shows TNS internal limit restriction exceed.Yes, that is because of this Operating System error:
HPUX Error: 23: File table overflowRefer to the metalink note provided above by oradba and fix the underlying OS error. First fix the root cause of the error which is the OS error "File table overflow". Once you do that, try again and post errors if still you have issues.
Message was edited by:
Kamal Kishore

My KDE forgets the session after restart

Hello
When I restart my KDE it forgets the session, the started apps and all the passwords I have put in the KDEWallet during the session. Does anybody has the same problem and do you have any idea how to fix it?
Thanks

Could be file permissions, or it could be a settings issue. Look around for settings for the two things, and if session saving is on and stuff like that, try the following.
chown yourUsername:yourGroup ~/.kde/ -R
chmod u+rw ~/.kde/ -R
Then reload KDE and attempt to use the mentioned features again. If checking settings and changing permissions does not work, then try running KDE via a virtual terminal so that you may look for error information if any is produced. Good luck.

EAR startup fails when weblogic managed server restart happens

My EAR startup is failing whenever we have server restart,we have 2 managed server in a weblogic cluster 10.2. if we remove migratable option from JMS server it works. can anybody tell what can be the root cause of this failure and how this links with non-migratable JMS server? Also if we go ahead with non-migratable JMS server whats the impact of not having migratable JMS server?
Thanks in advance,
Manoj,

My EAR startup is failing whenever we have server restart,we have 2 managed server in a weblogic cluster 10.2. if we remove migratable option from JMS server it works. can anybody tell what can be the root cause of this failure and how this links with non-migratable JMS server? Also if we go ahead with non-migratable JMS server whats the impact of not having migratable JMS server?
Thanks in advance,
Manoj,

How to reset the data when the session lost?

When I use response.sendRedirect("http://localhost:82/main.jsp")
the session lost, because the URL before redirect is using SSL,
"https://localhost:81/index.jsp", they use the different port,
so the session lost, what should i do to prevent this? And how
to reset the data?

Create a HashMap and store it as an attribute of the servlet context. In the first servlet assign the user a key and store all session data in the HashMap under that key (use a vector, collection or user defined class).
In the response.sendRedirect call add the key to the url:
response.sendRedirect(url + "?key=" + userKey);
In the second servlet get the key (request.getParameter("key")), retrieve the session data from the HashMap in the servletcontext and store in an httpsession.
Remember to delete the entry from the HashMap so it doesn't become overly large.

Client certificate authentication fails when the CA list sent by server is big and the list goes in 2 encrypted messages.

I checked with IE browser(on windows and MAC) and MAC safari packet capture. The CA certificate list is sent by server in 2 messages as the list is too big. I compared packet by packet exchanges in both the browsers. It is same till TLSv1 handshake is done for the ldap certificate authentication. It works fine in IE without any issues though the certificate list is divided into 2 messages.
In case of safari, after the TLSv1 handshake is done successfully, it again sends a SSLv3 'Client Hello' message and initiates the whole handshake process again and the server responds to it too till the handshake is complete. But it brakes after that with the server showing 'Cant establish secure connection' at the browser.
The issue occurs only in case of MAC safari for big list of CA certs >150(where it crosses the max limit) from server. It is not clear why safari alone is switching from TLSv1 to SSLv3 in this scenario.
NOTE: With shorter list of CA certs at server when it goes in one message, safari works fine and all messages are only TLSv1 and does not repeat the handshake process.
I have checked on safari version 5 and 6.0.3 on OS X mountain lion.
Is there any specific reason why MAC safari behaves like this or somethings needs to be done at server?
Any help would be appreciated.

I checked with IE browser(on windows and MAC) and MAC safari packet capture. The CA certificate list is sent by server in 2 messages as the list is too big. I compared packet by packet exchanges in both the browsers. It is same till TLSv1 handshake is done for the ldap certificate authentication. It works fine in IE without any issues though the certificate list is divided into 2 messages.
In case of safari, after the TLSv1 handshake is done successfully, it again sends a SSLv3 'Client Hello' message and initiates the whole handshake process again and the server responds to it too till the handshake is complete. But it brakes after that with the server showing 'Cant establish secure connection' at the browser.
The issue occurs only in case of MAC safari for big list of CA certs >150(where it crosses the max limit) from server. It is not clear why safari alone is switching from TLSv1 to SSLv3 in this scenario.
NOTE: With shorter list of CA certs at server when it goes in one message, safari works fine and all messages are only TLSv1 and does not repeat the handshake process.
I have checked on safari version 5 and 6.0.3 on OS X mountain lion.
Is there any specific reason why MAC safari behaves like this or somethings needs to be done at server?
Any help would be appreciated.

OdiSendMail fails when the session is restarted

Similar Messages

Maybe you are looking for