OEM not starting in 10G ...

HI,
While i am starting the oem it is saying below error:
D:\oracle\product\10.2.0\db_1\BIN>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://HIC-PCS0753:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleo
cl service is starting.
The OracleDBConsoleorcl service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
D:\oracle\product\10.2.0\db_1\BIN>NET HELPMSG 3534
The service did not report an error.
Please suggest how to proceed resolving the above error.
Thanks
Saurabh

Charlov wrote:
Hi,
I have an Oracle 10.2 environment on Unix and I am trying to start OEM from a client pc.
I connected through terminal sevices to the server and ran the following:
[oracle@stagedb oracle]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stagedb.wavemark.net:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................... started.
Logs are generated in directory /opt/app/oracle/product/10.2.0/db_3/stagedb.wavemark.net_STAGEDB/sysman/log
[oracle@stagedb oracle]$ emctl status dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stagedb.wavemark.net:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in directory /opt/app/oracle/product/10.2.0/db_3/stagedb.wavemark.net_STAGEDB/sysman/log
If, on the local machine, I type http://stagedb.wavemark.net:1158/em in internet exploerer, OEM does not start and gives me the following error:
Internet Explorer cannot display the webpage
What you can try:
Diagnose Connection Problems
More information
Hey its [https://stagedb.wavemark.net:1158/em] in 10.2.0.4
Try telnet to the port from you machine.
c:/>telnet stagedb.wavemark.net 1158
See if the port is open.
Regards.

Similar Messages

Could not start EM 10g

Hi,
I have oracle App server 10g (Infra and mid tier) is one machine..
It was working fine, until i pressed the Enable/Disable Components in the EM infra home. Then I could not start Em at all.
Oracle Enterprise Manager 10g Application Server Control 9.0.4.0.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
Starting Oracle 10g Application Server Control ...The Oracleoh_infra_904ASContro
l service is starting...........................................................
The Oracleoh_infra_904ASControl service could not be started.
A service specific error occurred: 2.
More help is available by typing NET HELPMSG 3547.
Please help me with this..where could the problem be.
Thanks a lot.

Hi,
I am still facing the same problem..Now i Start the Mid-tier EM using EMCTL. Now i'm getting a Null pointer exception whn accessing EM website
Wht could be the solution for this? Thanks.
Error:
java.lang.NullPointerException
     at oracle.cabo.servlet.xml.UIXPageBroker.getConfigurationName(Unknown Source)
     at oracle.cabo.servlet.ui.BaseUIPageBroker.getConfiguration(Unknown Source)
     at oracle.cabo.servlet.ui.BaseUIPageBroker.getService(Unknown Source)
     at oracle.cabo.servlet.xml.UIXPageBroker.getService(Unknown Source)
     at oracle.sysman.emSDK.svlt.EMServlet.initialize(EMServlet.java:406)
     at oracle.sysman.eml.app.Console.init(Console.java:200)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpApplication.loadServlet(HttpApplication.java:2094)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpApplication.findServlet(HttpApplication.java:4523)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2561)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:640)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)

OEM not start

Hello,
I had too this problem, there were two reasons : a bad tnsnames.ora (perhaps a same services names appears 2 or more time), and the service OracleOraHome81ManagementServer is not start.
Good luck,

/app/oracle/product/11.2.0/dbhome_1/lnxdb.localdomain_orcl/sysman/log
in that location there are many log files
1.emdctl.log
2.secure.log
3.patchAgtStplugin.log
4.nfsPactchplug.log
5.emom.log
6.emagent.log
TRACE FILES
==========
1.emagentfetchlet.trc
2.emoms.trc
3.emagent_perl.trc
4.emdctl.log
5.emagent.trc
please let me know which files content u realy want to need to check
thanks
cora

The OEM not start. User sysman is locked

Dear,
I can't start my OEM why password the user sysman expired. I changed password of user sysman and unlock, but always start OEM the user sysman lock again. I use Oracle Database 11gr2.
I´ve already the steps below, but it not solved my problem.
To change the Sysman password:
1. Stop the OMS instances that are associated with the repository
a. opmnctl stopall
2. Change the sysman password in the database:
a. Logon to sqlplus as a dba user
b. Issue the command: alter user sysman identified by newpassword;
c. Exit Sqlplus
3. On each management server host, cd to the OMS $ORACLE_HOME/sysman/config directory
a. backup the emoms.properties file
b. edit the emoms.properties file and modify the parameters;
eml.mntr.emdRepPwd=new_password
oracle.sysman.eml.mntr.emdRepPwdEncrypted=FALSE
NOTE: When you restart the OMS, the FALSE setting will change to TRUE and the password will become encrypted in the file
4. Still on Management Repository host, cd to the AGENT_HOME/bin and stop the agent:
./emctl stop agent
5. Next, cd to the AGENT_HOME/sysman/emd directory
a. Edit the targets.xml file and modify the oracle_emrep target definition with the following in bold:
<Target TYPE="oracle_emrep" NAME="Management Services and Repository" VERSION="1.0">
<Property NAME="MachineName" VALUE="host.us.oracle.com"/>
<Property NAME="Port" VALUE="1521"/>
<Property NAME="SID" VALUE="sid"/>
<Property NAME="UserName" VALUE="552f2080d6d8c3c6" ENCRYPTED="TRUE"/>
<Property NAME="password" "newpassword" ENCRYPTED"FALSE"/>
b. Save the file. The TRUE value will change to FALSE and the newpassword will become encrypted when you restart the Agent.
6. Issue the command (from the Agent O_H/bin):
./emctl start agent
7. Restart each of the OMS's
emctl start oms
How can I do to solve this problem?
I can't also drop repository of the OEM.
Thanks
Jurandyr F. Alves

Hi,
Its just a single command that needs to be executed:
cd <OMS_HOME>/bin
emctl config oms -change_repos_pwd -change_in_db
Note:
1. The above command
- will prompt you for the current password and the new password.
- will modify the sysman password in the repository database, in the emoms.properties configuration file / WLS Credential store and the monitoring credentials for the 'OMS and Repository' target.
- will ask you to bounce the OMS once the command is completed successfully
- for 11G, the command will modify the password for sysman and sysman_mds users in the repository database, modify the password in the credential store and change the monitoring credentials for the 'OMS and Repository' target.
2. The '-change_in_db' parameter is optional and is used to change the SYSMAN password in the repository database.
- If the sysman password is manually modified in the repository database, this option does not need not be specified.
- When this parameter is specified, the command will prompt for the current sysman password.
- It is recommended to use this option rather than manually modify the password in the repository database.
++ Once the above command executed, bounce the OMS.
Best Regards,
Venkat

HTTP server does not start on 10g

I have the following installed on my Linux Intel single box
Database 10g
HTML DB
Application Server 10g
I had configured my application on HTTP server and was running fine. On top of it I installed successfully Enterprise Manager Grid Control in the same box. Now when I start the Application server the HTTP server shows the status Stop.
The HTTP server is configured on port 80. When I access the URL on the browser it say 'No response from Application Server'. I tried restarting but it went on and on but didnt start.
Can anyone guide what could have gone wrong or what needs to be verified.
Warm regards,
Vipul

Hi Vipul,
I experienced problems recently where the hardware was rebooted after the Apps Server did not shutdown cleanly. When opmn(Oracle Process Manager) tries to start the HTTP server component it tries to cleanup the old process id by performing a hard stop on it. In my case this process was now owned by root instead of the owner of the Oracle installation. You can check this by doing
$ORACLE_HOME/opmn/bin/opmnctl status
If the pid of the HTTP_Server component is present then check the owner of that process by doing
ps -ef | grep <pid_goes_here>
and see who the owner is.
In our case we had to restart the root process that was running and everything started up correctly.
Hope this helps.
- Kenny -

CAN NOT start server 10G

Upon initial installation, on Windows2000 server. When I try to start the server, I am asked for Host and Targer DB credentials. And its not taking either. I get the following:
"RemoteOperationException: ERROR: Wrong password for user.
The problem is I am not sure which user its talking about, host or db. And whatever I try from the "controlled" usernames/passwords, it still complains.
1) How can I combat that
2) Where can I get log files that will give more information.

There are some ways to fix that. The cause of that issue are 3:
1.- The OS user with who you are logged in the OS is not part of the DBA Group
2.- The Database is not included in the listener
3.- The Database is shutdown
Ways to correct that:
1.- Include the current OS user to the DBA Group with OS utilities
2.- Register the database in the listener and reload it
3.- Start the database up and after start the dbconsole service or stopt/start the dbconsole service.
Joel Pérez
http://otn.oracle.com/experts

OEM not starting

Hi
we are having oracle 9.2.0.1.0. when we click on EM console it comes up and then closes down. this is happening since last 2-3 days
any suggestions
thanks

I have this note to myself if recreating the dbconsole, always seems to work, can you recreate and see...
1. Logon SQLPLUS as user SYS and drop the sysman account and mangement objects:
a. drop user sysman cascade;
b. drop role MGMT_USER;
c. drop user MGMT_VIEW cascade;
d. drop public synonym MGMT_TARGET_BLACKOUTS;
e. drop public synonym SETEMVIEWUSERCONTEXT;
2. Manually remove the following folders:
ORACLE_HOME/host_sid/
ORACLE_HOME/oc4j/j2ee/OC4J_DBConsole_host_sid
3.Set the ORACLE_HOME and ORACLE_SID
From $ORACLE_HOME/bin issue the following command:
emca -config dbcontrol db -repos create

Oracle 10G Non-Network install - OEM will not start when on the LAN.

Greetings,
Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
===========================================================
IP_address hostname.domainname hostname
where:
IP_address is the non-routable IP address you entered for the loopback adapter.
hostname is the name of the computer.
domainname is the name of the domain.
For example:
10.10.10.10 mycomputer.mydomain.com mycomputer
==========================================================
In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
192.168.110.250 IBM-6AB1330E158
==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
IP_address hostname.domainname
- not -
IP_address hostname.domainname hostname
Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
Thanks in Advance for any help,
ADG13

I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
fwiw,
ADG13
C:\Documents and Settings\Administrator>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : IBM-6AB1330E158
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ibm.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.110.250
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
Physical Address. . . . . . . . . : 00-11-25-13-96-AF
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 65.24.7.3
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
Ethernet adapter AGN Virtual Network Adapter:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . : AGN Virtual Network Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-01
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 9.49.217.159
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 9.49.217.159
DNS Servers . . . . . . . . . . . : 9.0.2.1
9.0.3.1
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM

OEM 10g not starting in explorer client

Hi,
I have an Oracle 10.2 environment on Unix and I am trying to start OEM from a client pc.
I connected through terminal sevices to the server and ran the following:
[oracle@stagedb oracle]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stagedb.wavemark.net:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................... started.
Logs are generated in directory /opt/app/oracle/product/10.2.0/db_3/stagedb.wavemark.net_STAGEDB/sysman/log
[oracle@stagedb oracle]$ emctl status dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stagedb.wavemark.net:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in directory /opt/app/oracle/product/10.2.0/db_3/stagedb.wavemark.net_STAGEDB/sysman/log
If, on the local machine, I type http://stagedb.wavemark.net:1158/em in internet exploerer, OEM does not start and gives me the following error:
Internet Explorer cannot display the webpage
What you can try:
Diagnose Connection Problems
More information
Any Ideas?
(I can ping the server from my pc)

Charlov wrote:
Hi,
I have an Oracle 10.2 environment on Unix and I am trying to start OEM from a client pc.
I connected through terminal sevices to the server and ran the following:
[oracle@stagedb oracle]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stagedb.wavemark.net:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................... started.
Logs are generated in directory /opt/app/oracle/product/10.2.0/db_3/stagedb.wavemark.net_STAGEDB/sysman/log
[oracle@stagedb oracle]$ emctl status dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://stagedb.wavemark.net:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in directory /opt/app/oracle/product/10.2.0/db_3/stagedb.wavemark.net_STAGEDB/sysman/log
If, on the local machine, I type http://stagedb.wavemark.net:1158/em in internet exploerer, OEM does not start and gives me the following error:
Internet Explorer cannot display the webpage
What you can try:
Diagnose Connection Problems
More information
Hey its [https://stagedb.wavemark.net:1158/em] in 10.2.0.4
Try telnet to the port from you machine.
c:/>telnet stagedb.wavemark.net 1158
See if the port is open.
Regards.

Oracle 10G R2 AS: Not starting up; please help

i got a server with oracle 10g app server installed on it. i opened the console at http://localhost:1811/emd/console and created a new OC4J instance but did not deploy the EAR file. When i tried to open the console the next day the page did not open. actually the server did not start at the startup. i tried to start the server from the Services but it did not start. please help me to rectify the problem.

If your application server is in windows,then open command promt. and then type cd $ORACLE_HOME\bin
and then emctl.bat start iasconsole
If your application server is in unix/linux,then open console. and then type cd $ORACLE_HOME/bin
and then emctl start iasconsole
It will start your OEM. then through ur OEM u can monitor ur server configuration.

Oracle 10g not starting after upgarde

Hi,
   Oracle not starting after upgrade and this service not starting automatically . This is error giving in the event viewer
Description:
The OracleDEV102iSQL*Plus service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Cheers
Murali

Hi,
I cannot explain what went wrong.
The error indicate that the upgrade is not finished or an error happened during the upgrade.
Please, review the alert log and the upgrade logs.
There are some possibilities:
- First one is to finish the upgrade to Oracle 10.2 manually. Please, check the Metalink notes:
Note 316889.1 - Complete checklist for manual upgrades to 10gR2
    Note:420146.1 - What is the Best Way to Upgrade to 10g?
- Second option is to restore the database to a point before the upgrade. In this case, you have to use the Oracle 9.2 software as well and need to restart the upgrade from the beginning.

Oracle database not starting up in oracle 10g RAC

Hi!
Recently I came across one problem with one node oracle 10g RAC.When the Oracle database is started,while opening it is giving ORA-03113:End of file on communication channel error.When I saw the the alert trace file and other trace files I found Disk group is exhausted error and it is not able to create .dbf files.Actually it is not a production server and I gave archive log destination in SAN.Even the spfile(content of init_database.ora) is in SAN..
I tried Asmcmd utility to delete the archive log files.As the oracle is not available I am not able to asmcmd prompt.
How to change the destination of archive log and to remove the old archive log files(as it is a testing environment we can remove) from SAN?Please let me know.
Thanks & Regards
Srikanth MVS

keithrust wrote:
On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. Hmmm, doing it several time, and never seen such issue. Which "known issue" and by who are you talking about ?
I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still hereI'm sure, you miss something somewhere in the config. Right now, you're on supported configuration, you could either raise a SR to the support, or get help from your peer on Oracle Database General forum.
Ah, but it's not a Windows issue. On a non-VM Windows box the database starts just fine all the time. Again, this is a known issue acknowledged by Oracle on the VMware side, I'm just surprised it exists on the Oracle VM side.Again, give more details about this "known issue". Never heard about that, eventhough I've been around for years.
I was afraid you were going to ask that. I'll have to search for it again, but I think you can do the same as well....Well, I doubt you could find a Metalink note about Oracle on VMWare. So far, Oracle has always refused to support database on OS virtualized on VMWare (or any VM software other than Oracle VM). Based on that, you could be sure, your "known issue" is not an issue on Oracle VM.
If you want more help, again, give more details about your issue.
Nicolas.

Oracle application server 10g enterprise manager is not starting

Hi all,
Pls. help me, our OAS 10g's enterprise manager is not starting whereas AS is up & opmn is also running.
Can anybody has idea?.Thanks in advance.

hi Kamran,
Please remember to always give some details about what product/ type/ version/ platform are you working with. this does not leave others to wait for divine revelation or mortal guessing;
also on reporting errors, please provide exact error(s) with error codes as you see and not the error described in your words. that helps clearly understand the problem.
about current problem, please tell us what did you expect to see and what did you exactly get.
and Roberto is right, check the version in %ORACLE_HOME%\config\ias.properties.
regards,
AMN

In Oracle 10g, iSQL* Plus Application Server is not starting

I have Windows XP OS, installed Oracle 10g.
But Finally OracleOraDb10g_home1iSQL*Plus is not starting.
I had looked in windows services OracleOraDb10g_home1iSQL*Plus status is in Starting. Not Starting
How to solve this problem, Because two or three client systems want to access this oracle iSQL*Plus through browser.
Not Working

I Tried this:
C:\oracle\product\10.1.0\db_1>%ORACLE_HOME%\jdk\bin\java.exe -Djava.awt.headless
=true -Xrs -Doracle.oc4j.localhome=%ORACLE_HOME%\sqlplus -Djava.security.propert
ies=%ORACLE_HOME%\oc4j\j2ee\home\config\jazn.security.props -jar %ORACLE_HOME%\o
c4j\j2ee\home\oc4j.jar -config %ORACLE_HOME%\oc4j\j2ee\isqlplus\config\server.xm
l
05/11/20 12:49:54 Copying default deployment descriptor from archive at C:\oracl
e\product\10.1.0\db_1\oc4j\j2ee\oc4j_applications\applications\isqlplus/META-INF
/orion-application.xml to deployment directory C:\oracle\product\10.1.0\db_1\oc4
j\j2ee\isqlplus\application-deployments\isqlplus...
05/11/20 12:49:54 Auto-deploying isqlplushelp (New server version detected)...
05/11/20 12:49:55 Auto-deploying file:/C:/oracle/product/10.1.0/db_1/oc4j/j2ee/h
ome/applications/dms0/ (New server version detected)...
05/11/20 12:49:55 Auto-deploying file:/C:/oracle/product/10.1.0/db_1/oc4j/j2ee/h
ome/default-web-app/ (New server version detected)...
05/11/20 12:49:55 Auto-deploying file:/C:/oracle/product/10.1.0/db_1/oc4j/j2ee/h
ome/applications/dms/ (New server version detected)...
05/11/20 12:49:55 Copying default deployment descriptor from archive at C:\oracl
e\product\10.1.0\db_1\oc4j\j2ee\oc4j_applications\applications\isqlplus\isqlplus
/WEB-INF/orion-web.xml to deployment directory C:\oracle\product\10.1.0\db_1\oc4
j\j2ee\isqlplus\application-deployments\isqlplus\isqlplus...
05/11/20 12:49:55 Auto-deploying iSQL*Plus (New server version detected)...
05/11/20 12:49:55 Auto-deploying file:/C:/oracle/product/10.1.0/db_1/oc4j/j2ee/o
c4j_applications/applications/isqlplushelp/isqlplushelp/ (New server version det
ected)...
05/11/20 12:50:00 Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)
initialized
what happened means for 15 minutes, it does not process itself. So i gave
^C
Still It is not started

How not to start Oracle 10g DB when Windows bootup

With Oracle 9i, I could set Oracle DB manually start so it would not start when Windows OS was booted/rebooted. This was done through setting Control Panel -> Admin tools -> Services -> Oracle9iMyDB's Startup type to "Manual".
Now I have 10g installed, same setting does not prevent 10g DB start up at Windows boots.
I have Windows 2000 now for 10g and past for 9i.
Could anyone help?
Thanks in advance.
DC

Under the registry key
My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_%ORACLE_HOME%
where %ORACLE_HOME% is the Oracle Home string
You will find the values:
ORA_%ORACLE_SID%_AUTOSTART
ORA_%ORACLE_SID%_SHUTDOWN
ORA_%ORACLE_SID%_SHUTDOWN_TIMEOUT
ORA_%ORACLE_SID%_SHUTDOWNTYPE
where %ORACLE_SID% is the databse SID
For an explanation of these values see the document:
http://download-west.oracle.com/docs/cd/B14117_01/win.101/b10113/registry.htm#i1006544
This document is listed as the "Platform Guide for Windows" on the "Documentation Library" "Windows" tab or:
http://download-west.oracle.com/docs/cd/B14117_01/win.101/b10113/toc.htm
Ian Cowell
----------

OEM not starting in 10G ...

Similar Messages

Maybe you are looking for