Oemapp does not come up

Hi all,
I installed oracle 8i in redhat linux 7.2 and almost everyting is working fine. but when i tried to start eom "oemapp console" nothing comes up, it just hang with no error or anything.
anybody seen that ? any ideas ?
thanx
atif

I know this doesn't help you much, but, I think you have to see if your Mac pro does audio out via HDMI. I don't even know if mine does via DVI. I think it may have to do with the adapter. Try going into Audio MIDI and setting the digital out to multichannel
and using the toslink cable for now. Lemme see...apparently DVI does not carry audio at all. Hm. apparently monoprice could be helpful?  If I understand what you're saying correctly: you want to take DVI and multichannel audio via the Toslink and have it all go out over HDMI, right? Whooo..... amazon...looks like it's about $100http://www.amazon.com/Audio-SPDIF-Toslink-Converter-Adapter/dp/B0015YYOQQ
just a shot in the dark
I'm probably wrong....or not
John B

Similar Messages

  • My Iphone 4 does not come with a SOFTWARE UPDATE option.

    My partner bought my iphone 4 version 4.2 about two years ago from a well known store. He got himself one at the same time but i cannot update mine because it does not come with an option in settings, general that allows me to update it. All of my apps are useless as they need at least iSO5 to run. I cannot check my bank accounts or anything. I have rung and spoke to apple many of times and followed all the steps to try and update. As this is not my fault and the iphone had not been loaded with the correct software there should be something APPLE could do free of charge!!!! I really need help as i cannot afford a replacement or want one. I just dont know what to do anymore!!

    Hi there wishheartgirl,
    You may find the information in the article below helpful.
    iOS 4: Updating your device to iOS 5 or later
    http://support.apple.com/kb/HT4972
    -Griff W. 

  • TS1538 ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

    ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

    What model iPad do you have? If it's an iPad 1, the battery may have expired and needs replacement.
     Cheers, Tom

  • Report does not come up when called from Forms

    I have installed Oracle 9i database and dveloper suit on my pc. When I run reports from forms, the report does not come up. I have Adobe Acrobat reader 6. The report does get created, I can see it in the cache directory.
    It created an error file, I am posting the begining of this file here.
    Please help.
    Thanking you in advance.
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x65553878
    Function name=Java_oracle_reports_engine_EngineImpl_CGetEnv
    Library=C:\orahome1\bin\rw90.dll
    Current Java thread:
         at oracle.reports.engine.EngineImpl.CGetEnv(Native Method)
         at oracle.reports.engine.EngineImpl.getEnvs(EngineImpl.java:453)
         at oracle.reports.engine.EngineClassPOATie.getEnvs(EngineClassPOATie.java:152)
         at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:205)
         at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
         at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
         at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
         at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
         at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
         at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
         at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
         at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)

    Hi ,
    Looks like this is not a Forms side problem or even a Reports Servlet problem
    Some guesses.
    From the exception
    at oracle.reports.engine.EngineImpl.CGetEnv(Native Method)
    at oracle.reports.engine.EngineImpl.getEnvs(EngineImpl.java:453)
    it looks like engine crashing. Did you see the server GUI up and running ? Server might not have started
    Give
    rwserver server=<server_name> in command line.
    The server GUI should come up and show "ready "
    You have multiple Oracle Homes on the same machine. So this could be a PATH problem.
    1) Go to ControlPanel -> System - Advanced - Env variables - System Variables
    Copy the IDS specific PATH to clipboard
    Go to iDS_HOME\bin\ and open a command window. Set only the above PATH here. Start a standalone server
    rwserver server=<server_name>
    and try
    (If this works you could write a batch file later)
    2) For trouble shooting purposes use a different server name to start the standalone server.
    3) Also look in your registry
    HKLM\Software\Oracle\Home<x>\
    Here please see whether you have any "very long" environment variable (say more than 256 chars or 512 chars).
    This is just a guess.
    4) To confirm this is not a Reports servlet problem
    give
    rwclient report=<report_name> + ..... <server=server_name>
    If you get same error, then it is not a servlet problem. It could be that Reports server is crashing
    Thanks
    Ratheesh
    [    All Docs     ]
    http://otn.oracle.com/documentation/reports.html
    [     Publishing reports to web  - 10G  ]
    http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
    http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
    [   Building reports  - 10G ]
    http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
    http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
    [   Forms Reports Integration whitepaper  9i ]
    http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf

  • My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

    my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
    thanks!

    The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

  • I want to email a Pages document as a Word doc. I used to be able to do this by clicking on share then send via mail then on Word and an email would appear with my word doc attached.  Now the email does not come up.  Why?

    I want to email a Pages document as a Word doc. I used to be able to do this by clicking on 'share' then 'send via mail' then on 'Word' and an email would appear with my word doc attached.  Now the email does not come up.  Why?

    It's difficult to do more than guess when you don't say what version of OS X or Pages you're running, but if you're on the latest, have you tried the Share menu -> Send via Mail command?
    If that doesn't help, you may have better luck if you ask in the Pages forum:
    Pages
    When you repost, be sure to include full details about your versions so that people know what it is you're working with.
    Regards.

  • When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position.  How can I get these multiple e mails prioritized?

    When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position.  How can I get these multiple e mails prioritized?

    We are talking about the Mail app, right? In the Mail menubar, click on Window and then Previous Recipients:
    That eliminates the previous recipients. If you are talking about the suggestions because there are 10 people with the name 'Steve' in your Contacts, then I do not know how to eliminate those unless you change the name slightly or wait until you type the last name or some other differentiator.

  • My daughter forgot her password and now her ipod touch is disabled.  When I connect it to itunes it does not come up on the screen as a device.  What can I do to get her itouch working again?

    My daughter forget her password and now her ipod touch is disabled.  Red message says to connect to itunes.  When I do connect to itunes, the device is not recognized and then a message comes on the screen that says it is locked and to enter the password to access it.  I cannot access the password and since itunes does not recognize the device, it does not come up on the list on the left, i cannot reset it.  What do I need to do so she can use her ipod touch again?   Thanks

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • When i plug my itouch into my computeri get a pop-up that says "this ipod cannot be used because the apple mobile device service is not started." and when i plug it it my itouch name does not come up on my itunes, how do i start it and fix this?

    When I plug my iPod Touch 4g into my computer I get a pop-up that says "This iPod cannot be used because the Apple Mobile Device service is not started." And when I plug in my iTouch the name of the iTouch does not come up on my iTunes. How do I start the Apple Mobile Device? How do I fix this?

    I'd start with the following document with that one:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Iphone 4 is not recognized by itunes, will not sync, charge indicator icon does not come on when hooked to usb charger

    When I hook my iphone 4 up to itunes, it does not show up on the left. It will not sync, and the lightning bolt charging indicator on the phone does not come on although it appears to be charging over time because the battery level has increasd.
    I am running Mac OS X, up to date as is my iTunes. I tried the steps from the website troubleshooting guide and nothing worked.

    Additionally, charging through other devices such as my car charger has the same symptoms.

  • IPhone does not come up as a device on my PC when ITunes loads even though it is connected via USB

    IPhone does not come up as a device on my PC when ITunes loads even though it is connected via USB

    Hi ICF Vic,
    Thanks for visiting Apple Support Communities.
    You can use our iPhone Troubleshooting Assistant to resolve the connection issue you're seeing:
    iPhone not appearing in iTunes
    http://www.apple.com/support/iphone/assistant/itunes/
    All the best,
    Jeremy

  • My screen saver is not working on my desktop after a power outage. It is set for 15 minutes but does not come on.

    I had a power outage. when the power came back, my screen saver does not come on after the set 15 min. Every thing seems fine. How do I get it to start working again?

    safeboot
    trash plist
    repaur
    ... and invest in 1500VA UPS

  • I have purchased a in app purchase of a 'gcsepod' for my little brother however the purchase does not come up in the app and requests me to buy another. How do i solve this? I have also got the receipt for this purchase.

    i have purchased a in app purchase of a 'gcsepod' for my little brother however the purchase does not come up in the app and requests me to buy another. How do i solve this? I have also got the receipt for this purchase.

    I'm not sure I can make sense of this but without asking too many questions, you can resolve your question by contacting iTunes direct.
    Apple - Support - iTunes - Contact Us
    But they will be wondering about the reference to hacking and you feeling bad about getting something for free.
    Best step in my view is to make sure you don't get similarly involved in future.  You must know roughly what you were doing.   Then writie it off to a not to be repeated experience.

  • External hard drive does not come out in desktop

    greetings! whenever i plug in an external hard drive or a USB flash disk through usb, it does not come out in the desk top. before, it used to come out, now it doesn't. i am still using the exact macbook. i think i touched something in the settings. please help

    Go to finder and choose preferences under finder in the menu bar. Now check and see if under General you have the choices clicked of what you want to show on the desk top.

  • Bridge CC does not come to the front, when opening file from explorer

    Hi everybody! Please let me now if there is way to solve the following problem:
    When Adobe Bridge CC is opened in the back and I surf through files in Windows Explorer, after I double-click the file I want to view, Bridge does not come to the front, like normal image viewers do, it opens the file normally, but unfortunately for me it stays in the back. And I want it to show up every time I open an Image!
    Thank you in advance!
    Win7, 64bit, Adobe CC

    Any App in Windows opened in the background has the ability to show up every time it is called... Except Bridge for some reason...
    If I double-click MP3 file - Windows Media Player shows up, even if it running in the back
    If I double-click a text file - Notepad shows up, even if it running in the back
    But if I double-click an image file - Bridge just stays in the back

Maybe you are looking for

  • Production Order in SAP Retail!

    Hi all experts!       I have requirement like:              In Genaric Article, we have many variants(by size and color). Can consider variant is Finish Good. The issue now is, my client do Gross Requirement Calculation base on Genaric Article(they c

  • Javascript Problem for Drill Down Action in SSRS Report when integrated to PPS 2010

    Hi all, I have a SSRS report which is integrated to PPS 2010(Performance Point Services) and it is having a drill down action through Go to URL action(I wrote javascript:void(window.open('xxxxx')) to open drill down report in new window). This report

  • To provide "variant creation facility" in a Molule pool program

    Hi I have develope a molude pool screen with some  input fields. now I want to provide " variant creation facility" as in standard reports. I will enable "SAVE" button on the status bar. but  I have no idea how to  provide variant creation facility s

  • -bash: gcc_select: command not found

    HI I am try to compile the Darwin kernel 9.8 on my system according this page https://developer.apple.com/library/mac/#documentation/Darwin/Conceptual/KernelP rogramming/build/build.html but unfortunaly I get the error message -bash: gcc_select: comm

  • Kate always open files in a new window after kde upgrade

    kate always open files in a new window, instead of the existing window as a new document after kde upgrade to 3.5. someone else have the same experience and have a solution for that ? cheers, notz