Production Order in SAP Retail!

Hi all experts!
      I have requirement like:
             In Genaric Article, we have many variants(by size and color). Can consider variant is Finish Good. The issue now is, my client do Gross Requirement Calculation base on Genaric Article(they compnie all variants) for each production order. It means they 1 production order for all variant in Genaric Article. And base on it they run Gross Requirement Calculation after that go to MRP. When they issue raw material base on production order of Genaric Article. And they also do GR for All variants with same production order, I mention above.
            Please advise me some solution for cover that requirement!
Can we create manualy production order and Assignt gross requirement calculation of rawmaterial in that prod ord.
And do GR for many FG with 1 production oder?
     Regards,
     Tony
Edited by: Tony Adman on Apr 20, 2010 6:35 AM

Nobody give idea.
Thanks!

Similar Messages

Product Costing in SAP Retail Solution

Hi experts
I have a question about product costing in SAP Retail (SAP ECC 6.0).
In material master data (Tr. MM43 - Tr. MM42) Product Costing view for Logistics:CD sheet is activated.
Although, for Logistics:Store sheet is not activated.
In customizing, we have tried to activate the Product Costing view for Logistics:Store sheet, but there no standard dynpro to use it. So, we have some doubts:
- Do we have to create customer (Z) dynpros in order to activate Product Costing view for Logistics:Store sheet?
- Does SAP allows Product Costing functionality in SAP Retail solution?
If both answers are YES, i have another doubt:
- In our business scenario, the store is supplied by the Distribution Center. So, does it make sense to run product costing for
a articles in a Store?
We think it makes sense to apply product costing functionality in Distribution center. In order to analyze deviations from
Standard costs to real costs. But we are not sure about Stores.
Does anyone have experience in customizing product costing functionality for a SAP retail in a Logistics:Store?
Thank you for your time
Regards

hi
Product hierarchy in R3 is termed as Merchandise category hierarchy in SAP IS retail
But in R3 Product hierarchy is not used much but Merchandise category hierarchy that is termed as MCH is a basic thing reqd for defining master data that is article master data which is nothing but material master in R3
As i said Product hierarchy levels are available in R3 also but not much used
Merchandise category hierarchy levels is most commonly used in SAP IS retail
What we call material group in R3 is same as Merchandise category in SAP IS retail and material in R3 is article in Retail
Merchandise category hierarchy levels
Say a Retail mall has merchandise items
Under merchandise there are 2 divisions Food and non food
Under nonfood say there are 2 divisions say hardware and apparel
Under apparel there 2 divisions say Mens wear and ladies wear
Under mens wear you have t shirts,shirts and pants etc
Here t shirts,shirts and pants etc are individual articles
Menswear and ladies wear are material groups
Hardware and apparel are merchandise hierarchy level 1
Food and non food merchandise hierarchy level 2
Retail mall is merchandise hierarchy level 3
like that hierarchy levels are commonly defined and used as a must to have efficient master data in SAP retail and the maximum no of hierarchy to have ideally is 6 apart from Merchandise category
In our example we have defined three levels
The same functionality can be used as product hierarchy in R3 also but doesnt been put in to use much
In Retail the no of articles a store is going to manage to be will be huge hence this sort of seggregation is needed there must
For more clarity try to post this in retail forum(Trading industries)
Regards
Raja

How to create Production order in SAP B1

Hi Experts,
Can anyone send me a link on how to create Production Order in SAP Business One?
Regards,
Vishal
Ver: SAP Business One 2005 B (7.40.253) SP: 00 PL: 43

Hi,
Kindly check the following link for the How to Guide on various topics :
[How to Guide|https://websmp210.sap-ag.de/~form/sapnet?_FRAME=OBJECT&_HIER_KEY=701100035871000371280&_SCENARIO=01100035870000000183&]
You can search for the document Production and Bill of Materials.
Kind Regards,
Jitin
SAP Business One Forum Team

Product hierarcy in SAP Retail?

Hi,
I have heard that there is a possibility to have more then one product hierarcy in SAP Retail.
The std hierarcy (created in OVSV) is used for financial follow up but we need the possibility to have another hierercy for presenting the products to the customers in a structured way. I have herad that there are such possibilities in SAP Retail, but I cant find them.
Pls tell me if it is possible and also how I go about.
Thanks,
Emma

Hi Emma,
In SAP IS Retail, if you wish to use hierarchy for presenting the products to the customers in a structured way. Then you can use either Article Hierarchy or Merchandise Category Hierarchy.
The Article Hierarchy in SAP ERP enables customers to structure goods based on customer-individual criteria. It is used in Planning, Operations and Reporting on different levels of aggregation.
Path:
Logistics --> Retailing --> Master Data > Article Hierarchy Data> Create           (WMATGRP01)
Whereas merchandise categories mostly observe physical attributes of the goods the article hierarchy groups articles from a sales perspective.
Path:
Logistics --> Retailing --> Master Data --> Material Group Data --> Merchandise Category   (WG21)
Logistics --> Retailing --> Master Data --> Material Group Data --> Merchandise Category Hierarchy Level    (CLWM)
Hope it helps.
Regards,
Anirban Roy

Download Maintenance Orders instead of Production Order in SAP IM-3.2

Hi All,
I am trying to fetch Maintenance orders instead of production order in syclo agentry IM-3.2
In the receipts screen their is a button GetProdOrder which fetches the Production order,instead of fetching the Production Order i want to change it to fetch the Maintenance Orders.
please suggest me steps for the above change.
Thanks ,
Deepak.M
Tags edited by: Michael Appleby

Deepak,
I don't think this will be easily accomplished. The BAPI is written specifically for production orders. I believe it would require changes to the BAPI itself, or changing the java to point to a different BAPI.
Jason Latko - Senior Product Developer at SAP

Goods Issue from Production Order in SAP

Dear experts,
I faced one issue not yet solve is that my customer created the production order
then already issue for production for all quantities of child item .
Example:
Production OrderItem A
Item A1 = 2 Qty
Item A2 = 2 Qty
Item A3 = 2 Qty
Issue for Production Item A
Item A1 = 2 Qty
Item A2 = 2 Qty
Item A3 = 2 Qty
But later on, my customer found out that 1 Qty of Item A1 already damaged.
So they want to issue one more Qty of Item A1 instead of one that already damaged.
How can I issue one more Qty for this item?
Please your advices are necessary for me.
Best regard,
Borey

Hello Borey,
Solutions may depend upon the way you want to book the cost for the damaged part A1.
     (a) If you want to book the cost to the production order itself (production order is a cost object), manually book consumption for another quantity using MB1A, 261 movement (you will have to mention the production order during posting this consumption).
     (b) If you do not want to book higher cost to that production order, you can:
           1. Extract damaged quantity of A1 from that production order using MB1A 262 movement.
           2. Create a manual QM lot and after rejection, move that damaged quantity to blocked stock.
           3. You can scrap or rework from that blocked quantity later.
           4. Issue another quantity of A1 from unrestricted stock to that production order using MB1A                261 movement.
Hope I could help you.
Best Regards.
Rajen

Change input quantity of a production order in SAP - PP

Hello,
I am working in a custom code where one of the steps is to create production orders basically based on a product, workcentre and quantity for what I use 'COXT_BAPI_ORDER_CREATE' function module.
Now I have a new requirement which is to be able to change the input component quantity to a different value than the output (similar to what you can do in transaction CO01, and like what the on-line help claims you can do).
This new value should be on top of the ratio that is possible to specify in the BOM (i.e substract 5000 KG to what ever is in the input node after creation of the order).
The GUI allows for this so I assume there is a way to do it in custom code as well, but has not find the way to do it or function to call.
Can you advise on how to change the input quantity value without affecting other info of the order?
Thanks
Regards,
Update: found this other thread Change components and Routing of production order
Edited by: Mauricio Pego on May 3, 2011 6:00 PM

Hi,
The requirement can be met via BADi - MD_DISPLAY_ELEMENT (method - CHANGE_MDEZX_EXTRA).
Give the specification your technical person & the same can be done.
Regards,
Vivek

Open production orders and its costs migration

Hi All,
We are migrating open production orders from legacy to SAP.
We have some standard cost production orders are open in legacy and like to migrate a open production orders to SAP?
May I know how can I do from controlling point of view?
I have one typical scenario.
I have one production order in legacy with 10 standard cost materials produce and out of 10, 5 materials are completed in legacy and we wants to migrate remaining 5 materials to SAP.
What are the steps I needs to follow to migrate open production orders.
Any help is appreciated.
Thanks,
Anusha

Hi Anusha,
Below is the process: (presuming that you're uploading balances as of 01.04.2009)
Upload all material masters,
Upload material initial balances,
Create new Production Orders as of cut off date, say 01.04.2009
Issues goods to Production Orders created above.
All the goods/material issued to Production are debited to raw material consumption account.
The value of WIP can only be ascertained during month-end closing process.
If it is pressing requirement then upload the balances as of 31.03.2009 and then do a month-end/year-end closing.
Thanks,
Srikanth

BAPI for Production Order creation ?

Hi Experts,
I am new to PP module and as per my requirement I have to:
1. Create Production order in ECC 6.0
    After searching BAPI explorer, SDN and other sites I could see that there is no BAPI for Create Production order.
    In one of the link I could find FM CLOI_CHANGES_UPL_31 used to create Production order in SAP.
Is there any BAPI to create ??
Can anyone let mw know right FM or BAPI to create Production order with an example.
2. And I have to:
Delete Production order
which BAPI is used for deletion of Prd Ord
BAPI_PRODORD_SET_DEL_INDICATOR or BAPI_PRODORD_SET_DELETION_FLAG
For Confirm Production order - in ECC 6.0 Let mw know the BAPI for this ..
Really helpful if you answer my queries...
Thanks
Uday

Hi udaya,
use the BAPI 'BAPI_PRODORD_CREATE'
The following BAPIs are available confirmation of production orders:
    Entry
        Time ticket
        ProdOrdConfirmation.CreateTimeTicketMultiple
        BAPI_PRODORDCONF_CREATE_TT
        Time event
        ProdOrdConfirmation.CreateAtHeaderLevelMultiple
        BAPI_PRODORDCONF_CREATE_HDR
        Order confirmation
        ProdOrdConfirmation.CreateAtHeaderLevelMultiple
        BAPI_PRODORDCONF_CREATE_HDR
        Activity confirmation
        ProdOrdConfirmation.CreateActConfMultiple
        BAPI_PRODORDCONF_CREATE_ACT
    Defaults
        Time ticket
        ProdOrdConfirmation.GetTimeTicketProposal
        BAPI_PRODORDCONF_GET_TT_PROP
        Time event
        ProdOrdConfirmation.GetTimeEventProposal
        BAPI_PRODORDCONF_GET_TE_PROP
        Order confirmation
        ProdOrdConfirmation.GetAtHeaderLevelProposal
        BAPI_PRODORDCONF_GET_HDR_PROP
    Cancelling confirmations
    ProdOrdConfirmation.Cancel
    BAPI_PRODORDCONF_CANCEL
    List of confirmations
    ProdOrdConfirmation.GetList
    BAPI_PRODORDCONF_GETLIST
    Detail data for confirmations
    ProdOrdConfirmation.GetDetail
    BAPI_PRODORDCONF_GETDETAIL
    Existence check
    ProdOrdConfirmation.ExistenceCheck
    BAPI_PRODORDCONF_EXIST_CHK
Regards,
Ravi

Unable to Return Components of Production Order

Hi,
Created Production Order (PdO) with 9-10 components, the 8th component being Item HEX with planned quantity of 5 and actual issue of 200 at row number 8 of PdO. In meantime, someone had deleted some row of PdO. The user then tries to click "Report Completion" and "Return Components" and selects Item HEX. The row number for Item HEX is now strangely Row 9 and the user is unable to return the quantity of 200 for Item HEX.
The "available batches" table of the Item HEX just does not show the quantity of 200 and the user is unavailable to "return components".
Could someone help me what the problem could be?
Thanks,
Ajay Audich

Hi Gordon,
The item row deleted was some other item and not Item HEX. The Item HEX which now shows as row 9 DOES show the issued quantity as ~200 but the batches for this quantity are not visible and cannot be selected in the batch selection screen.
Could the deletion of some OTHER item in the production order create this problem?
Hi Sridharan- I do not understand your reply "wrongly posting"-could you please explain...this error is happening in the production order of SAP Business One.
Thanks,
Ajay Audich

Production Orders Changes Log

Hello,
I would like to know if there is any Standard way in SAP to be able to see the modifications for a production order. I would like to see modifications in quantities or components.
Does anybody knows if it is possible to retrieve that information in a standard way?
Thanks

Dear
Changes in Production Order can be traced through following ways :
1.Order Change Management :
Frist a Overall profile should be configured in SPRO > PRoduction>Shop Floor Control > Operations>Change Management for Production Orders-->Define Overall Change Profile.
Create a Change Number CC01 with Release Key
In Object Types select/tick "Actv", "object", "MgtRec",
You get the Change Number by Saving .
Use this Change Number to Change BOM or Routings
Then Release the Change Number useing Release Key till then you don't find the Change of BOM in Production Order.
Then go to Oder Change Process T Code :- COCM
Tick Change Number and Select the Change Number & Execute
Select the Production Order, click on Procurement element icon you get another screen select and execute again.
You get an Pop-Up screen. "Determine changes, Check changes, Change Original Order.
you see the changes in BOM for Production Order i.e. after COCM.
Then Confirm the Changes in Production Order then New changes will be Active in production Order.
Use COCM1 to find out the details or CO03--Extra --change
Please check link : http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PPSFC/PPSFC.pdf
2.To get the changes in Production Order apply SAP Note 390635.
3 .You can use T.code AUT10 to check the changes made to production orders in specified period.
Regards
JH
Edited by: Jiaul Haque on Nov 28, 2010 2:11 PM

Changes in Production Orders

Hi gurus,
I want to track changes made by end users in the production orders in a report format. Which will tell what was old value and what is new value.
What needs to be done for this?

Dear
Changes in Production Order can be traced through following ways :
1.Order Change Management :
Frist a Overall profile should be configured in SPRO > PRoduction>Shop Floor Control > Operations>Change Management for Production Orders-->Define Overall Change Profile.
Create a Change Number CC01 with Release Key
In Object Types select/tick "Actv", "object", "MgtRec",
You get the Change Number by Saving .
Use this Change Number to Change BOM or Routings
Then Release the Change Number useing Release Key till then you don't find the Change of BOM in Production Order.
Then go to Oder Change Process T Code :- COCM
Tick Change Number and Select the Change Number & Execute
Select the Production Order, click on Procurement element icon you get another screen select and execute again.
You get an Pop-Up screen. "Determine changes, Check changes, Change Original Order.
you see the changes in BOM for Production Order i.e. after COCM.
Then Confirm the Changes in Production Order then New changes will be Active in production Order.
Use COCM1 to find out the details or CO03--Extra --change
Please check link : http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PPSFC/PPSFC.pdf
2.To get the changes in Production Order apply SAP Note 390635.
3 .You can use T.code AUT10 to check the changes made to production orders in specified period.
Regards
JH
Edited by: Jiaul Haque on Nov 28, 2010 2:11 PM

Problem in saving production order confirmations

Hi,
I'm trying to save the production order in SAP using xMII and BAPI_PROCORDCONF_CREATE_HDR.
I'm getting a message which says that confirmations are saved, but it is not reflected in SAP.
Please help me regarding it.
Thanks

Hi,
see the SAP note # 744403. Here it says that if we are updating SAP using BAPIs/RFCs... then we need to commit the BAPI.
In normal scenarios, we call this BAPI
BAPI_TRANSACTION_COMMIT
but in xMII, we have an option in JCO block which says "auto commit this transaction". Check this option.This will do the same thing. and data will be reflected in SAP
Hope it helps.
Regards,
Musarrat

Splitting the cost of Production Order

Hello Sapians,
We have a situation where a purchase order has all of its costs going to one production order but the services provided
on the purchase order were actual for three production orders. What is the process for adjusting this amount for the
production order costing?
For example, PO number is 10001 and this is currently all being charged to production order 60003. I would like
15000 USD be moved to both production orders 60001 and 60002.
Do we have any process of splitting the amount to two different Production Orders in SAP?
Thank you,
-Harter.

Hi Ajay,
I checked the Order and there are some actions after the Production Order is settled.
For example: The Order got settled twice in 12/10/2010 and 01/31/2011. And the Variance was there when settling the Order second time and it was also settled on 01/31/2011.
There are some operations that are on the Production Order before and after the second settlement dates. Even after 01/31/2011 month's settlement I can see some charges on the Production Order from the operations (Subcontracting, Overhead PRD, Personnel Hr)
My questions and doubts are
1. Do I need to reverse both the months settlements?
2. What are the impacts of the reversing the settlements on the other operations that were executed before and after the Order is settled? (Operations are Subcontracting, Overhead PRD, Personnel Hr).
Thank you,
-Harter.

Actual Confirmation quantity of PRT w.r.t production order

Dear All gurus,
In master data the PRT quantity and usage value and respective formula has been maintained and for same when production order is creating the data is flowing properly, but in production order screen SAP provides Quantity/ Usage value, actual quantity/ actual usage value and remaining quantity/ usage value. How I can post some usage value by actual usage value will updated.
Thanks,
Das

Dear,
Create PRT as equipemt then assign PRT to Operation in the Routing or Tasklist at the time of assigning you can give the usage, according to ur PRT usage formula the usage of PRT gets calculated which you can see in the Routing/tasklist in Production or Maintenanace Order.
When you are entering time ticket or confirming the qunatity the PRT is get utilised according to confirmed quanity that you can see in the actual usage in Routing.
Pleas try and come back.
Also provide your inputs for the thread Forecated Consumption value.
Regards,
R.Brahmankar

Production Order in SAP Retail!

Similar Messages

Maybe you are looking for