Office 2007 Network Distribution

Has anyone managed to distribute office 2007 successfully via NAL ?
i am running Zem 6.5 SP2 and have followed the instructions from
*cough*microsoft*cough* who say to run the command line
\\ccs-services2\APPS1\Common\Office2007\setup.exe /adminfile
\\ccs-services2\APPS1\Common\Office2007\Updates\UWS.MSP
where \\ccs-services2 is netware 6.5 sp5 server that holds our
applications, i have created the msp file by running setup /adminfile
but the poxy thing still keeps prompting for stuff and doesn't do an
"unattended install"
anyone else played about with this ????
the command line doesnt work on its own let alone via NAL object lol
anyone ?
GarethWilson
http://www.systems.swan.ac.uk/gareth/homer.gif
Why oh Why Do i Always Get PC's with No Linux Drivers !

Also if you get the following error in the eventlog when trying to
install any of the Office 2007 suite applications :
PRODUCT: MICROSOFT SOFTWARE UPDATE FOR WEB FOLDERS (ENGLISH) 12 --
ERROR 1933. THE WINDOWS INSTALLER SERVICE CANNOT UPDATE ONE OR MORE
PROTECTED WINDOWS FILES. SFP ERROR: 21. LIST OF PROTECTED
FILES:\R\NC:\PROGRAM FILES\COMMON FILES\MICROSOFT SHARED\WEB SERVER
EXTENSIONS\40\BIN\FP4AUTL.DLL
then you need to get the file fp4autl.dll and copy it to
C:\PROGRAM FILES\COMMON FILES\MICROSOFT SHARED\WEB SERVER
EXTENSIONS\40\BIN\
before you start the installation of Office 2007/Visio 2007 etc etc
PS i found frontpage 2003 sp2 installed this file for me on my admin pc
so i didnt get the error until i ran the install on a pc which hadn't
had any version of frontpage installed on.
apparently its a known error with office 2007 install...
GarethWilson
http://www.systems.swan.ac.uk/gareth/homer.gif
Why oh Why Do i Always Get PC's with No Linux Drivers !

Similar Messages

Office 2007 saving documents over mapped network drive takes abnormally long

On a new Windows 8.1 Pro 64 bit computer, I have installed Office 2007. When I attempt to save documents to a mapped network drive on a peer network (saving to a Windows 8.1 Pro 64 bit computer), I have abnormally long save times. However, when I attempt
to save documents to my computer, I have no issues. I do not have any issues when opening the files over the mapped drive.
Turning off the third-party Bullguard Internet Security antivirus and firewall makes no difference. Setting as an exception the excluded mapped drive folder makes no difference either.
I have disconnected the mapped drive and re-mapped the network drive, but this makes no difference.
I had no problem with the same software on a prior computer running the same Office 2007 version. Another computer on the network has no issues either.
Please advise how to speed up the saved documents (Word, Excel).

Hi,
As the slow to save files issue, please try the suggestion below to modify the registry:
Important
This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the
registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry,
http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
To start the Registry Editor, press Win + R, type "regedit.exe" in the blank box, press Enter. Then add the following registry key to the machine:
[Hkey_Current_User\Software\Microsoft\Office\12.0\Word\Options]
"DisableRobustifiedUNC"=Dword:00000001
[Hkey_Current_User\Software\Microsoft\Office\12.0\Excel\Options]
"DisableRobustifiedUNC"=Dword:00000001
I hope this can help.
Regards,
Melon Chen
TechNet Community Support

Problems with MS Office 2007 and Tiger Server

I have an Xserve hosting file services for Macs and PCs. There is a RAID attached to the Xserve storing user data and ACLs are enabled. Since installing Office 2007 on the PCs there's been the following problem which can be replicated -
When saving an Excel or Word document back in the 2007 suite to the Xserve, the user will be unable to save the document if it is saved back for the third time. In Excel 'Unable to save document is reported'. In Word the document can't be saved due to a network error or a file permision problem being reported.
The above is true for existing documents created in Excel or Word 2003, then saved in 2007 versions, which are on the Server, or for documents created using Excel or Word 2007.
Users are logging on with different user accounts. They first log on to a Windows domain hosted by a Small Business Server then a drive has been mapped on their PC, to give thme access to the Xserve.
As I said things were OK until Office 2007 was installed on the PCs.

I'm having the same issue, allowing guest access on the share did change the logs I'm getting in Samba. Earlier on it was giving errors on the inability of guest access to the share.
============================================================
[2008/01/29 13:05:47, 0] /SourceCache/samba/samba-100.5/samba/source/lib/fault.c:fault_report(37)
INTERNAL ERROR: Signal 11 in pid 4204 (3.0.10)
Please read the appendix Bugs of the Samba HOWTO collection
[2008/01/29 13:05:47, 0] /SourceCache/samba/samba-100.5/samba/source/lib/fault.c:fault_report(39)
============================================================
I also noticed that the temporary file that is created by office is not removed after the attempt to safe the file. (something like: ~$filename).

Office 2007 XLSX Support

hi,
I am looking for a solution that can help me in some standard way to support xlsx support to my ECC6 EHP 4 System.
I want if alv is exported ( any alv report program) in excel it should generate xlsx file Office 2007 standard xlsx file to save.
I am also looking of any class / object / functions that I can use to generate xlsx file from my custom program and send as email or do a GUI_Download.
I know I cannot ask too many questions on single thread, but my requirement is to have a standard solution that supports 2007 office excel file format in download/ upload by default.
I found an OSS not also that refer to same requirement but I want you advice that does it solve my purpose fully.
OSS note: 1286768
Thanks
Anand

Hi,
ALV export to XLSX format can be achieved using CL_SALV_TABLE and CL_BCS, This works with   ECC6 EHP5, not sure about EHP 4.
See the following code snippet to send email as XLSX attachement.
types:
     begin of lty_alv,
     end of lty_alv.
data: lt_alv type standard table of lty_alv.
data: lo_salv_table type ref to cl_salv_table.
select ... into table lt_alv .....................
cl_salv_table=>factory(
           IMPORTING r_salv_table = lo_salv_table
           CHANGING t_table = lt_alv ).
* Generate XLSX format & send email
     DATA: lo_bcs TYPE REF TO cl_bcs,
           lo_document TYPE REF TO cl_document_bcs,
           lo_distrlist_bcs TYPE REF TO cl_distributionlist_bcs.
     DATA: lv_xml TYPE xstring,
           lt_stream TYPE solix_tab.
     DATA lv_msg TYPE string.
     "Get XML output in Excel xml format
      lv_xml = lo_salv_table->to_xml(
                    xml_type    = if_salv_bs_xml=>c_type_excel_xml
                    xml_flavour = if_salv_bs_c_tt=>c_tt_xml_flavour_full ).
     lt_stream = cl_bcs_convert=>xstring_to_solix( iv_xstring = lv_xml ).
      lv_msg = 'Mail body text goes here'.
     lo_document = cl_document_bcs=>create_document(
                           i_type = 'RAW'
                           i_text = cl_bcs_convert=>string_to_soli( iv_string = lv_msg )
                           i_subject = 'Mail Subject goes here' ).
      lo_document->add_attachment( i_attachment_type = 'RAW' "XLS also can be used
                         i_attachment_subject = 'file_name.xlsx'
                         i_att_content_hex = lt_stream ).
      lo_bcs = cl_bcs=>create_persistent( ).
      lo_bcs->set_document( lo_document ).
      lo_bcs->set_sender( i_sender = cl_cam_address_bcs=>create_internet_address( 'sender email id' ) ). "cl_sapuser_bcs=>create( sy-uname )
      lo_distrlist_bcs = cl_distributionlist_bcs=>getu_persistent( i_dliname = 'Distribution list name'           i_private = abap_false ). "Or use create internet address as above
      lo_bcs->add_recipient( i_recipient = lo_distrlist_bcs ).
      lo_bcs->set_send_immediately( abap_true ).
      lo_bcs->send_request->set_link_to_outbox( abap_true ).
      lo_bcs->send( ).
      commit work.
Disadvantage of this method: if mail is opened within SAP Business workplace, it does not identify the file type as it support only 3 character identity as of now. External email clients can open the attachement properly. If you want to open the attachement within SAP, change attachement type to 'XLS' and remove the file extension from file name.
Thanks,
Shajahan

Full file path in Office 2007 when open or save

Am not sure i can raise this question here.
We are using 10gR2 Application server and Windows 7 as a Client. In the client machine we have installed the Microsoft Office 2007.
From the forms we are trying to open and save (after changes) the files of format Doc/Xls. These files will be stored in separate shared folder accessible through Application server and client.
Now the issue is when we open/save the file it shows the Entire path (In Saving Window) which should not happen. In previous release of MS office its not like this.
Please help us "to hide the file path to be displayed to the user". Like changing the registry for Office 2007 or workarounds or new solutions or any other oracle's product.
Note : Showing the file name is the Office 2007s default behavior.

The only way to avoid showing this from a Forms point of view would be to not display the open/save file dialog in the first place. In other words, control the opening and saving using your own custom dialogs. Also, be aware that using remote drives (network mapped) may cause problems. Generally speaking, doing this would not be considered supported.
As for opening documents on the client, there is no need to use the open file dialog if you know the file name and path to that file in advance. You can simply use WebUtil's CLIENT_HOST. So let's say you wanted to open a file named mySales.doc and you knew its location, all you would need to do is this:
Declare
     my_cmd varchar2(255);
Begin
     my_cmd := 'rundll32 shell32,ShellExec_RunDLL '|| :t1;
     CLIENT_HOST(my_cmd);
End;In the above example, +:t1+ is a text field on a canvas. The value would include the path and file name to be opened. Of course this could be a pl/sql variable which you programatically populate or any combination of that. The value value must include the full path (with drive letter) and full file name. If the path or name contains spaces, double quotes may likely be necessary. You will have to test.
For saving an opened file, you are mostly out of luck from Forms unless you took control of Word/Excel as it was being opened in the first place. For example you likely can open the Office products using OLE or VB or other macro and control what the open and file save dialogs look like or if they are even accessible at all. But this has nothing to do with Oracle or specifically Forms.
You need to refer to the MS documentation.

Can't Save Files To Exchange 2007 Network

After upgrading to 10.6 months ago I have lost the ability to revise and save changes to a file residing on an Exchange 2007 network. The issue below happens to the two of us using Macs in the company.
The file (XLS, DOC, PPT, etc) on the network can be opened and modified on my Mac just fine. Then when we try to save the following error message is returned "Microsoft Excel cannot access the file [Path]:[File Name]. There are several possible reasons: The file name or path does not exist. The file you're trying to open is being used by another program. Close the document in the other program, and try again. The name of the workbook you're trying to save is the same as the name of another document that is read-only. Try saving the workbook with a different name."
None of the situations above are occurring. The same issue happens to my Mac co-worker and only began to occur for both of us when we upgraded to OSX 10.6. We've not been able to find a fix all this time but figured it would get addressed in 10.6.1 but now that we are on 10.6.2 and the problem continues it has become more than irritating. For now the only thing we can do is save the file to our desktop, modify it, save it, close it, then copy the local file to our network. During this time of course other users might have opened the same file and made changes ... changes that will be lost when we paste our revised file over theirs.
All other Mac <-> Exchange functions are fine ... can see files on the network, copy/paste files, move files, rename files ...
We are using 10.6.2 running on a MacBook Pro on an Exchange 2007 network. If it matters we are using Office 2004 for Mac V 11.5.5.
Thanks for taking the time to share your ideas.

You’re correct. I used this naming, because I currently can’t lookup the correct version. But I believe it’s a Windows Small Business Server 2003. Since this problem seems to be kind of widespread it may not even be that important since it seems to be a SMB/10.6 rights problem.

Acrobat X Standard locking MS Office 2007 Clipboard on Windows 7

Acrobat X Standard locks Office 2007 Clipboard on Windows 7 Enterprise 32bit Version after a few copy and pastes from Acrobat X into MS Word, Excel etc
As soon as I close Acrobat X Clipboard is released in Office and I am able to paste again. I can copy and paste if I copy data as followed
Open PDF file in Acrobat X Standard
Copy Infomation required
Close Acrobat X
Paste data into office app
repeat until complete
Otherwise a reboot of the machine will allow for a couple of Copy and pastes in a row.
NOTE only have copy and paste issues with Acrobat X is open
Thank you for your suggestions in advance
Regards

>doesn't allow users to save the completed pdf forms to any of the network drives
Over in the Premiere Pro forum where I spend more time (use that more than the Acrobat that came with Master Collection) there are a few messages a year from people who want to use PPro with networked files, or run from a network instead of a standalone computer... and the answer has always been that the program is simply not designed to be used in that fashion... so it doesn't work
It would appear that Acrobat is also designed to run on a standalone computer, with local hard drive(s) and doing anything else just won't work
I don't remember the name of the (software-hardware?) but there was one message by someone using a specific type of network that allowed them to "spoof" the local computer into thinking that the network drive was actually a local drive hardwired to the computer... and that did work for file saving

Windows 7 + Office 2007 & 2010 VERY slow saving files to on 2008 R2 files shares

OK I have litterally tried everthing in every forum there is to resolve this. It is only happening on our Win 7 workstations that are running Office 2007 or 2010. Our file shares are on a 2008 R2 server. Opening and saving files on the shares using
Office is very slow. I have tried updates and server and workstations are 100% up to date. The server is only running as a file share server. Nothing else on it. We have completely set up new PC's to test with clean Win 7 installs and nothing else except Office.
Nothing else on the network is slow at all. I have tried all the hotfixes in the world that could relate to this from many hours of research into possible causes. I have done the EnableShellDataCaching fix, the SMB 2 disable fix, the windows search/indexer
fix, the pdfmaker fix, the lookup wizard add-in fix, the go to the newest firmware on the cisco switch fix, update workstation nic driver fix, the Trusted Locations in Excel fix, and about a dozen other fixes. NOTHING WORKS! This has brought our Win 7
and Office 2007/2010 users to a halt in their ability to do their jobs. Our company is suffering badly. And did I mention that our IT dept is getting a lot of heat and criticism about it. FYI we are running an IBM E5450 with dual multi-thread
multi-core(8) 3 Mhz Intel Xeon processors with 2008 R2 64-bit, 12 GB ram, and the server is using litterally no resources. Network connected is Gigabit. This has to be a Microsoft issue with 2008/Win 7/Office 2007&2010. This has become a nightmare for
out IT dept and has consumed weeks of our time when we need to be working on other projects. Can anyone solve this. Microsoft: Please release a REAL fix for this that we can run on the server or push via GPO to the workstations.

Hi,
Take a look at this and see if it helps:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
also
Office 2010 components, such as Word 2010?
At this time, I suggest trying to start Excel in safe mode. Then, open the Excel file or create a new Excel file, and save the file to the network again.
Start the Excel program in safe mode
1.       Click Start, point to All Programs, and then point to Microsoft Office.
2.        Press and hold the CTRL key, and then click the Microsoft Excel.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Excel program, we can try to disable them. Normally, you could do the following to disable the conflict add-ins in your Excel program:
Disable add-ins
Click File menu, click Options > Add-in, click Go button in the Manage: Com-in Add.
Check if there are any add-ins, clear the checkbox to disable them.
Close the Office program and restart it.
Add one check back each time to the list of Add-In, restart the Office program, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for you, please feel free to let me know.
====
Is the performance also slow when you trying to save the Excel file to other network path?
At this time, we can also try to test this issue in the clean boot mode.
Test in Clean boot Mode
===============
Let’s disable all startup items and third party services when booting. This method will help us determine if this issue is caused by a loading program or service. Please perform the following steps:
1.       Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
Note: If prompted, please click Continue on the User Account Control (UAC) window.
2.        Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3.       Click the "Startup" tab, click "Disable All" and click "OK".
Then, restart the computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System Configuration Utility when Windows starts" box and click OK.
Note: Temporarily disabling the Startup Group only prevents the startup programs from loading at startup. This should not affect the system or other programs. We may still manually run these programs later.
What’s the result now?
How to return from the Clean Boot state
After the troubleshooting, we can return from the clean boot state:
1.       Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
Note: If prompted, please click Continue on the User Account Control (UAC) window.
2.       On the "General" tab, click "Normal Startup - load all device drivers and services".
3.       Click OK. Click Restart when you are prompted to restart your computer.
If this answer solves your problem, please check Mark as Answered. If this answer helps, please click the Vote as Helpful button. Cheers, Shane Devenshire

Office 2007 to imac via remote disk

hi, i have office 2007 on disc which i thought i would try to load on to my new i mac (late 2013. 2.9 ghz,8gb,10.9.3) running parallels . i have used my mac book pro(early 2011,10.7.5) as an opyical drive. the files show up on the imac remote disc.on the i mac i then run 'setup.exe' , it comes back with a window stating
'setup error - setup cannot find the required setup controller file.either there was a network error,an error reading from the cd,dvd,or other installation media,or a problem with the package you downloaded'.
My question is, do you think this error is due to my method of using remote disc ( copy issue?) ,or corruption of origional media? maybe if i used an optical drive pluged directly into the i mac the software would run as intended?

You should probalby ask your question on the Paralells forums:
http://forum.parallels.com/

Office 2007 Plugin

Since installing the Office 2007 plugin for Livecycle Rights Management we have been experinecing a few issues.
Users who when using EXCEL 2007 and scrolling with their mouse it crashes, closes and recovers document. .
Also users trying to save word documents are unable to choose netowrk drives it just freezes. they have to save locally and copy to netowork.
Please note when plugin is removed both issues are resolved.
Any ideas?
Chad

HI Steve,
This is a weird one where it doesn't seem to be all PC's but we are getting more and more reports as the days go by.
Once the plugin is removed things return to normal. The Excel problem occurs with documents that are not protected and happens most frequently when a user is scrolling through the document using the scroll wheel on the mouse. It doesn't seem to happen when users use the page up or page down options.
The word doc issue I has so far only been reported by approximately 3 users but each one I personally investigated. I remove the plugin and the user has no issue saving the file to the network. I re-install as administrator and the un-configured plugin does not cause the issue, but as soon as i configure and point it to the policy server the issue immediatley re-appears.
I am continuing to investigate but was hoping someone has already experienced and resolved or can point me the right direction.
Thanks,
Chad

Office 2007 (visio)

Hi,
Just looking at how Visio 2007 installs, and from what i have read, you
cant run it from an msi, it has to be run from setup.exe.
(http://technet2.microsoft.com/Office....mspx?mfr=true)
I've used OCT, and that all works, but just curious as how to use
ZENworks to deploy it. I've only deployed .msi's.
Where possible, i like to add the serial number via a property in the
MSI tab of consoleone, but i'm not sure if this will be possible using
setup.exe.
Any help appreciated.

Well i shouldn't have worked on this so early..
That url was for Office XP setup properties. Office 2007 setup
properties here:
http://technet2.microsoft.com/Office....mspx?mfr=true
And it doesn't take any properties on command line :(
I unticked 'Continue distributions immediately', and now the
dependencies work.
On 5/07/2007 9:10 AM, Andrew Dauncey wrote:
> I have got it all going now.
>
> Just did the Simple application (no .msi) option. properties can still
> be passed on cmd line with setup.exe (see Office 2007 setup properties:
> http://office.microsoft.com/en-au/he...364681033.aspx)
>
> Only prob i have is with dependencies. From within the Visio object, i
> have added XMLlite (which is an .exe too). I have tested that on it's
> own, which is all ok, but when now running Visio, it has both installers
> going at the same time.
>
> Not really a problem i guess, but i would have preferred if XMLlite
> finished before it started to install Visio.
>
> On 2/07/2007 4:25 PM, Andrew Dauncey wrote:
>> Hi,
>>
>> Just looking at how Visio 2007 installs, and from what i have read,
>> you cant run it from an msi, it has to be run from setup.exe.
>> (http://technet2.microsoft.com/Office....mspx?mfr=true)
>>
>>
>> I've used OCT, and that all works, but just curious as how to use
>> ZENworks to deploy it. I've only deployed .msi's.
>>
>> Where possible, i like to add the serial number via a property in the
>> MSI tab of consoleone, but i'm not sure if this will be possible using
>> setup.exe.
>>
>> Any help appreciated.

HT4759 How to Completely Uninstall iCloud? Office 2007 Save As Crashes

I can no longer use "Save As" in Office 2007 since I enabled ICloud. Word and Excel Crash. And Outlook does not seem to be about to send more than one email at a time. I have to select the Send/Receive button right after I create a new email. If I wait and create a second email, the first email in the outbox changes status from ready to send to cannot send. And even if I open it and try to send it, it will not send. I have to re-create it.
I want to know how to thoroughly uninstall ICloud. Other posters on Microsoft (Girish M) and Apple (SkinnyNick) have indicated that the problem is related to ICloud. And I can confirm that I started having problems right after enabling ICloud. Here are the references:
http://answers.microsoft.com/en-us/office/forum/office_2007-excel/excel-2007-clo sing-unexpectedly-when-trying-to/69705682-06ca-4e39-b17e-56d4bacc3452
https://discussions.apple.com/thread/4607859?start=0&tstart=0
I spent a lot of time trying to trouble shoot this problem. I ran the Office install to repair. This did not work. I uninstalled all Office 2007 related products. I then manually purged all directories relating to office including the Common Shared Directories. Then, I ran Microsoft's FixIt to uninstall Office to make sure everything was uninstalled. Then, I reinstalled Office 2007 and it still failed. I thought about installing Office 2010, but the second post (above SkinnyNick) indicates that this would not work.
So, I am looking for a way to uninstall iCloud including that parts that is causing this problem. Now, the second post (above) from
SkinnyNick) says that he tried to uninstall iCloud but this did not fix the problem. He finally reconfigured iCloud by de-selecting Outlook, but I would rather completely remove iCloud.
Can anyone provide instructions on how to completely remove iCloud so that my Office 2007 products will function again using Save As?
Thanks,
Rob

As a Windows Application Developer who has more than 28 years of professional development experience, I can tell you that anything is possible in terms of how developers implement their applications. I have seen just about everything under the sun, and it would not surprise me if Apple's iCloud not only places files in key Windows directories, but it may use configuration information in a file as opposed to the Window Registry to control how their application behaves. And this would prevent “System Restore" from fixing the problem. Configuration information can be stored in many places. And, even if you do use the Windows Registry to control how your application works, you can key off of new files (like a user profile file) to control how your application to behaves. Csound1, you have been very generous with your time, and I am very grateful for your advice. Thank you.

Hot Synch with Windows XP and MS Office 2007

I can not synchronize my Palm Treo 680 Unlocked with Windows XP Home and MS Office 2007.
I see several comments regarding Outlook 2007. Is resolving the synchronization of Outlook 2007 the same solution as Office 2007?
If so what is the solution?
Post relates to: Treo 680 (Unlocked GSM)

I also cannot synch my Palm Treo 680 unlocked with Outlook 07 using Vista. It says "Hot Synch Operation Completed Successfully", but nothing did synch. I downloaded palmoutlook07conduits.zip and there was no change. I was synching wirelessly using Microsoft Exchange Active Synch without problems, but when I cancelled my 'data' package on my cell phone, it no longer was synching. I tried reloading my original Palm CD, but it doesn't allow me to select 'Outlook' as my connectivity. Please help. And please don't provide me with a bunch of acronyms as I won't understand them!!!!
Thanks,
Post relates to: Treo 680 (Unlocked GSM)

OneDrive for Business sync client with Office 2007

We have 700 people organisation using Sharepoint 2013. One of the key features for us is the OneDrive for business that allows us to sync document libraries. BUT there seems to be a big problem with Office 2007 clients, after installing the separate client
opening and creating documents get's broken. Same thing is described here:
http://blogs.technet.com/b/odsupport/archive/2014/02/06/you-cannot-open-or-create-office-documents-in-sharepoint-2013-with-office-2010-and-office-2013-products-installed.aspx
Office customization tool cannot be used with standalone client and there is no way to disable Microsoft Sharepoint Foundation support. Technet states that Office 2007 is supported but it surely doesn't feel like it. SP2 fixes this for Office 2010, but that
doesn't help with Office 2007. Is there any solution for this?
Regards,
Sampsa

Hi,
It’s a known issue with Office 2007 or 2010 (without the latest Service Pack) along with SharePoint 2013.
To resolve the issue, you can install Service Pack 2 for Office
2010 and Service Pack 3 for Office 2007.
Or disable the IE Add On - "SharePoint OpenDocuments Class" .
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Jason Guo
TechNet Community Support

Report Generation Toolkit on Vista and Office 2007

Hi,
I am trying to install Report Generation Toolkit 1.1.2 on LabVIEW 8.5 on a computer with Vista Business and Microsoft Office 2007.
The installation is starting, but I am receiving a message saying that "Microsoft Office 2000 or later is not detected on the computer"
The installation stops and the toolkit is not installed.
What can I do ?
Tom

Tom SAVU wrote:
Hi,
I am trying to install Report Generation Toolkit 1.1.2 on LabVIEW 8.5 on a computer with Vista Business and Microsoft Office 2007.
The installation is starting, but I am receiving a message saying that "Microsoft Office 2000 or later is not detected on the computer"
The installation stops and the toolkit is not installed.
What can I do ?
Tom
The Report Generation Toolkit does probably not support Office 2007 yet. This is because the Office ActiveX interface used to change with each version and the Report Generation Toolkit comes with specific libraries for each of the Office versions it supports. With the wrong office version the Report Generation Toolkit VIs are normally broken and can't run without some more or less involved modifications.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Office 2007 Network Distribution

Similar Messages

Maybe you are looking for