11.1.1.6.4 Repository variables for DSN and USER do not work after upgrade

Hi,
The Repository Variables OLAP_DSN and OLAP_USER no longer work after upgrading to 11.1.1.6.4 i.e they return a connection error when trying to import metadata but the connection is correct if explicitly set without the variable used.
I have tried the following resolution:
- From command line execute commands to set variable properties via admintool.exe /command vartext.txt
Open rpdname user password
SetProperty "Variable" "OLAP_DSN" Initializer "'ORCL.GLOBAL'"
Save
Close
Exit
This script works fine as demonstrated by commenting out Save, Close, Exit and running. But it does not resolve the problem.
The issue is consistent as in the OLAP_USER variable does not work if DNS for connection pool set to ORCL.GLOBAL.
Is this a bug?
Thanks in advance
Edited by: 983325 on 26-Feb-2013 02:35

There is a 3.1.0.5 client. First thing I would try is the newest client.
Sent from Cisco Technical Support iPad App

Similar Messages

After i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

after i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

I am also on my forth hard drive on the same model.
When I unpacked the computer, the hard drive did not include OS X either. Actually, it was completely blank. Did not even have a partition table! I have also had random problems with the machine not charging.
I have replaced the drive myself with an SSD after figuring the Apple Certified technicians were incompetent. Now even the SSD is starting to fail
I have bought an HP laptop and setup Ubuntu on it. Hope it turns out better than my previous four various Mac models. All have had various repeating hardware issues that Apple Certified technicians have been unable or unwilling to correct.

My iPad 2 started to backup iCloud and its now locked up. How do i unlock it, the button for settings and close are not working. What can I do?

my iPad 2 started to backup iCloud and its now locked up. How do i unlock it, the button for settings and close are not working. What can I do?

Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Color Swatches in Toolbar for Fill and Stroke are not working properly.

The color swatches in toolbar for fill and stroke are not functioning as they should. When I select an object on the artboard, the swatches display fine in the toolbar for what they should be. However, when I double-click on those swatches from within the toolbar to modify the color, the color which comes up is #000000 instead of the actual color it should be.
I am using 16.2.1 (cloud) for Mac OS 10.8.2
I've submitted a bug report, but want to know if anyone else has had this issue and what they did to resolve the issue.
Also, the eyedropper tool is buggy and occasionally places the #000000 into an object instead of the characteristics the eyedropper is selecting. I don't have any hidden layers or weird groupings, it just randomly decides when it is going to work or not.
I've never had these issues on previous versions of illustrator and have been proficient in all versions since 2007.

Double click the eyedropper, and turn on appearance, is off by default.
For your #000000 color problem that also likely is related to appearance setting. You may have for example have some with #000000 at the character level, and another color at the type level.

Paid for Conversion and it Does not Work

I paid to convert files and it is not working!!!! It keeps asking me to subscribe, when I have already subscribed and have paid!!!! And, I need to convert this document immediately!!!!

You have posted in the wrong forum and since the software/service is not identified I am unable to point you to the correct forum in which to post.
Here is a link to a page that links all of the Adobe forums. Find the one for the product your posting involves and post there:
http://forums.adobe.com/index.jspa

Help for date field not working after upgrade

hi experts,
In our BSP application for a page we had an inputfield (date).
Onvaluehelp for input field we were calling the saphelpdate function.
however after upgrade this functionality is not working properly as no pop up comes after clicking on the icon.
we have upgraded to SPS 16 recently.
please help me.
regards,
Arvind.

Hi, I try upper case but nothing happen. This is all my code by far, I hope you can help me:
DATA: BEGIN OF T_PCONT OCCURS 0,
      PCONT LIKE ZPSPERMISOS-PSOBKEY,
END OF T_PCONT.
DATA: BEGIN OF T_FIELDS OCCURS 0.
        INCLUDE STRUCTURE help_value.
DATA END OF T_FIELDS.
DATA: BEGIN OF T_VALUES OCCURS 0,
      VALUE(60) TYPE c.
DATA: END OF T_VALUES.
DATA: N TYPE i.
SELECTION-SCREEN BEGIN OF BLOCK b20 WITH FRAME TITLE text-b02.
SELECT-OPTIONS:
    P_CONT FOR ZPSPERMISOSH-PSOBKEY OBLIGATORY NO-EXTENSION NO INTERVALS,
    P_INT FOR ZPSPERMISOSH-PARTNER OBLIGATORY NO-EXTENSION NO INTERVALS,
    P_FEC FOR ZPSPERMISOSH-ZFINICN NO-EXTENSION NO INTERVALS,
    P_RAZ FOR ZPSPERMISOSH-ZRAZONFINIC NO-EXTENSION NO INTERVALS.
SELECTION-SCREEN END OF BLOCK b20.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_CONT-LOW.
PERFORM P_HELP_P_CONT USING P_CONT-LOW.
*&      Form P_HELP_P_CONT
FORM P_HELP_P_CONT USING P_P_CONT.
DESCRIBE TABLE T_PCONT LINES N.
IF N EQ 0.
    T_FIELDS-FIELDNAME = 'PSOBKEY'.
    T_FIELDS-TABNAME    = 'ZPSPERMISOS'.
    T_FIELDS-SELECTFLAG = 'X'.
    APPEND T_FIELDS.
    CLEAR T_FIELDS.
    SELECT PSOBKEY FROM ZPSPERMISOS
    INTO TABLE T_PCONT.
    SORT T_PCONT BY PCONT.
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
    EXPORTING
      CUCOL        = 10
      CUROW        = 1
      TABNAME      = 'T_PCONT'
      FIELDNAME    = 'PCONT'
    IMPORTING
      SELECT_VALUE = P_P_CONT
    TABLES
      FIELDS       = T_FIELDS
      VALUETAB     = T_VALUES.
ENDFORM.                    " P_HELP_P_CONT
Edited by: J. Garibaldi on Nov 25, 2009 11:14 AM
Edited by: J. Garibaldi on Nov 25, 2009 11:16 AM

Mac Mini Wake for Network Access Not working after upgrade

After upgrading to the latest OS (10.8) the WOL fuction is not work. This used to work before the release. i could see the Mac mini on my mac book pro even when it was asleep. Once I click on it under the shared resources area I could see the Mac wake up. Now as soon as it goes to sleep it drops from my mac book pro. I am connected via WIFI but also tried via LAN. Same result. Any ideas? Seems to be a bug as I google this issue it appears to be impacting many people.

Same issue here after updating my iMac to OS X 10.8. I can't use Logmein, wireless syncing to iTunes from my iOS devices, or my Logitech Server software for my Logitech Radio. Once the computer goes to sleep, it is invisible to the rest of the network. This all worked fine on 10.4-10.7. I have double-checked that Wake on Network Activity is turned on. I have disabled all networking interfaces except Ethernet. Nothing seems to help.

Open Dataset for input in BINARY MODE not working after ECC 6.0 upgrade

Hi All,
Our requirement is to download an XML file from the application server and there is a customized program to download these files.
This program uses the statement, Open dataset ...for input in BINARY MODE
and it works perfect for 4.7. There were no issues. But, after the upgrade to ECC 6.0 this does not work.
When the data is read in ECC 6.0 , it is shown in some special characters and it could not be opened with XML editor and the file is not completely downloaded. I read through the forum and tried the following statement as well,
Open dataset....for input in LEGACY BINARY MODE.
After this statement, there were no special characters, but there is a blank space introduced before every character.
Example : TEST(actual)
T E S T (After the legacy binary mode)
Could you please let me know if there is any solution to rectify this problem. Appreciate your help.
Thanks a million.
Edited by: Manikd on May 12, 2011 3:52 PM

But this program was already using BINARY MODE and after upgrade this is not working. I know, it may work in TEXT MODE. However, I cannot change the whole program to TEXT mode now.

Sound alerts for received and sent mail not working

How can this be fixed? Using yahoo email. Did work before upgrading to os4.3

Do you have system sounds off? Go into settings and see if you have selected Mute System Sounds or Lock Screen Orientation for the button on the right hand side of your iPad, just above the volume control. If you have Mute System Sounds checked, simply move the button in the opposite direction. If you have Lock Screen Orientation checked for that button, click your home button once to go to your home screen. Then double click your home button twice and your most recently used Apps will appear on the bottom row. On that row, with your finger, swipe those Apps to the right all the way and an icon will appear on the very left side. It should be a mute button and by touching it, you will turn system sounds back on. Let me know if this solves your problem.
If neither option works, reboot your iPad. Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore red slider) until the Apple Logo appears, then let go of both buttons and your iPad will restart. You will not lose any data or settings.

E-Recruitment,Syncronization for Employee and Business Partner not working?

hi there,
i itend to create a business partner for employee in SAP E RECRUITMENT but when i run the report HRALXSYNC for an employee, the result i am getting is total blank. I suppose there should be some errors if it is not working properly, but the the screen after running the report is total blank.
are any prior settings must me meet before the business partners can be created using HRALXSYNC?
thanks you

HI Ravi
Requirements to use the report are the activation of the integration for buisness partner. You could get details from sap note 550055.
You have to switch on the following keys in table T77S0 with SM30:
Group    Sem. ID
HRALX   HRAC           to 'X' for global HR-Integration
HRALX   OBPON        to "ON" for activate the integration between organization object and business partner
HRALX   PBPON         "ON" for activation the integration between central perosn and business partner
Hope this helps.
Regards
Bernd

"Save for Web and Devices" button not working anymore

I can't use the Save for Web and Devices button anymore. Is there a reason for that, I didn't pay 500$ for a software that won't work.

Hi Mylenium,
I use Windows 7 Professional 64-bit.
As for what I did for it not to work anymore, I did nothing at all. This happen in two steps from what I remember, first the button was working but it was not opening the usual window with 4 different file types you can save the image as, it was giving me an error window that said something in the lines of "Could not initialize". Afterwards, the "Save for Web and Devices" link just became greyed out, and was just un-usable. It's not making sence that I did nothing and the software just does not work properly, I'm wondering if any of the other software in the suit that I purchased do the same thing, and is there a way to fix this.

8.1 icloud drive for Document and Data is not working well

On my iPad Air 2 and iPhone 6 (both on ios 8.1), every other day my apps would stop syncing with icloud. I noticed this with a few apps such as 1Password and Drafts 4.
icloud for default calenders and reminders were still working during this down time, just the Document and Data not syncing with icloud.
Remedy action:
(1) I need to off icloud drive
(2) press on home bottom and On/off bottom simultaneously to re-start the device
(3) then switch on the icloud drive again to make the Document and Data sync with icloud again.
This is really irritating and how can I think of a PC-less future when icloud is not reliable?
I am supposed to gain synergy for using 2 ios devices but I am certainly not feeling it at the moment.
Please can Apple fix this soon?

Page and Numbers are having the same problem. It gets so irritating that I have turned off the icloud drive for both apps.

Lion - bluetooth for keyboard and magic mouse not working anymore

Hi all,
I installed LION on my macbook pro yesterday. Today my macbook stopped recognizing my magic mouse via bluetooth - after rebooting the machine it also didn't recognize the bluetooth keyboard anymore.
When I try to pair the devices with my machine under system preferences it keeps finding them, but cannot pair any longer.
Did anybody else experience this problem - and solved it?
Cheers,
Gregor

I have the same problem, and so far no solution. After Lion install, MacBook Pro 17" (mid'09) will not re-pair with my Apple bluetooth keboard. First of all, it should not need re-pairing at all -- but it does. Next, keyboard is recognized by Bluetooth Setup Assistant, but the the result is always "pairing attempt unsuccessful." I am using new batteries, and the keyboard is two feet away from the MBP. UGH.
Apple Bluetooth Software Version:          2.5.0f17
Hardware Settings:
Address:          60-fb-42-7a-a0-ba
Manufacturer:          Broadcom
Name:          San Juan Studio
Firmware Version:          180 (369)
Bluetooth Power:          On
Discoverable:          Yes
Vendor ID:          0x5ac
Product ID:          0x8217
HCI Version:          4 (0x4)
HCI Revision:          369 (0x171)
LMP Version:          4 (0x4)
LMP Subversion:          8628 (0x21b4)
Device Type (Major):          Computer
Device Type (Complete):          Mac Portable
Composite Class Of Device:          3801356 (0x3a010c)
Device Class (Major):          1 (0x1)
Device Class (Minor):          3 (0x3)
Service Class:          464 (0x1d0)
Peer to Peer Supported:          Yes
Services:
Bluetooth File Transfer:
Folder other devices can browse:          /Users/Shared
Requires Authentication:          No
State:          Enabled
Bluetooth File Exchange:
Folder for accepted items:          /Users/mac/Public/Drop Box
Requires Authentication:          No
When other items are accepted:          Ask
When PIM items are accepted:          Ask
When receiving items:          Refuse all
State:          Disabled

Java plugin for Firefox and Chromium just not working

Hi Arch Users
I have been suffering with the IcedTea-Web for a while now. My banking service (in their stroke of genius) use java on there online service. So a problamatic plugin means that I am not able to use the website while on Linux.
The issue is not specific to the bank's website. Doing the following is also problematic:
1. Go to www.java.com
2. Click on "Do I have Java?"
3. Click on Verify Java Version
4. Chromium does nothing after setp 3, Firefox has a small notification (bottom corner) saying Applet Started but nothign really happens (waited for 20min).
Searching the Forums, showed people with similar problems with an older plugin. An idea I did get was to use the latest branch and compile it. So I changed the PKGBUILD to download the latest using:
hg clone http://icedtea.classpath.org/hg/icedtea-web
./autogen.sh
./configure --prefix=${_jvmdir} \
--datarootdir=/usr/share \
--with-jdk-home=${_jvmdir} \
--with-firefox=/usr/bin/firefox \
--with-chromium=/usr/bin/chromium
So currentely my FireFox reports the IcedTeaWeb as: IcedTea-Web Plugin (using IcedTea-Web 1.4pre+r6e622e87010e). Unfortunately the issue remains.
Please can anyone suggest me a way to overcome this issue. Currentely I have to use VirtualBox to run a browser in Windows (very very painful)!
A while back I did contact the bank, informing them of the issue was met with a simple "We dont support Linux".
Cheers!
J
Last edited by jlight2011 (2012-10-19 02:57:22)

1. Same story with www.java.com from Chromium checking version of Java.
2. Java plugin from my bank stopped to work with the following diagnostics:
net.sourceforge.jnlp.LaunchException: Fatal: Launch Error: Could not launch JNLP file.
at net.sourceforge.jnlp.Launcher.launchApplication(Launcher.java:600)
at net.sourceforge.jnlp.Launcher$TgThread.run(Launcher.java:889)
Caused by: java.lang.RuntimeException: Unable to create locks directory (/tmp/MyUserName/netx/locks)
at net.sourceforge.jnlp.services.SingleInstanceLock.getLockFile(SingleInstanceLock.java:138)
at net.sourceforge.jnlp.services.SingleInstanceLock.<init>(SingleInstanceLock.java:58)
at net.sourceforge.jnlp.services.XSingleInstanceService.checkSingleInstanceRunning(XSingleInstanceService.java:131)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at net.sourceforge.jnlp.services.ServiceUtil$PrivilegedHandler$1.run(ServiceUtil.java:183)
at java.security.AccessController.doPrivileged(Native Method)
at net.sourceforge.jnlp.services.ServiceUtil$PrivilegedHandler.invoke(ServiceUtil.java:188)
at net.sourceforge.jnlp.services.$Proxy9.checkSingleInstanceRunning(Unknown Source)
at net.sourceforge.jnlp.services.ServiceUtil.checkExistingSingleInstance(ServiceUtil.java:136)
at net.sourceforge.jnlp.Launcher.launchApplication(Launcher.java:537)
... 1 more
Before the repository switched to the open java project and I used Sun/Oracle version, everything worked OK.

I often rely on my Norton Toolbar for sites, and it does not work with the new updates. Can I uninstall recent Mozilla updates until this add-on works with Mozilla, or am I stuck? Thanks!

It's probably really easy to figure this out and uninstall the updates but, well, I'm slightly tech-illiterate! I use my Norton Toolbar a lot for those sites I visit infrequently, and this non-compatibility issue is the same reason I stick with Mozilla over Chrome, but now I can't even use my Norton information with Mozilla. Thanks.

http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788

11.1.1.6.4 Repository variables for DSN and USER do not work after upgrade

Similar Messages

Maybe you are looking for