Office 2013 Auto Archiving not working

Dear Sir / Madam,
We are using MS OFFICE 2013 with Windows 8.
Problem we face is Auto Archiving not working at all. We have defined all the parameters, still it is not working. We are using Exchange Server and all the emails are Archived to local PST files after a defined time period.
We have defined all the steps required to do Auto Archiving.
Your help is required in this since we have tried all the options.
Paloli Manoj

Hi,
What's the size or your archive.pst file? Please first make sure it's not getting close to 50 GB limit.
If the size far below 50 GB, please try to use the Inbox Repair tool to scan and repair the archive.pst file. If the file is corrupt, the autoarchive will not happen.
http://office.microsoft.com/en-in/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx?CTT=1
For more troubleshooting steps, please refer to this:
http://www.howto-outlook.com/faq/archivenotworking.htm
Regards,
Steve Fan
TechNet Community Support

Similar Messages

Office 2013 group policies - not working

I'm using Office 2013 Pro Plus SP1 (volume license) on a Windows 7 Pro machine [both are 32 bit]. While I have Server 2003, it's configured to work with Windows 7 and Office 2013 Group Policy templates. I use RSAT on a Win 7 computer to
create/manage the Group Policies.
Since we're not using Office 365, I'm trying to block some of those features, as well as disabling the Office Start screens.
Thinking that SP1 might be the problem, I downloaded the group policy templates for SP1 and copied them to the server.
If I create a policy (Office_2013_settings), with a few settings, like "Block singing into Office". In Group Policy, I disabled the Computer Configuration, leaving the User Configuration enabled. If I force group policy on the target
computer and look at RSOP, I see the computer configuration settings disabled, but nothing for the user configuration, although it's enabled in the policy.
If I put a junk policy entry on the computer configuration and enable both policies on the backend, force group policy on the computer, and look at RSOP, under computer configuration, I see the Office_2013_settings policy, but the policy still doesn't appear
in the user configuration. If I scroll to the bottom of the file, where I can see other Administrative templates and their settings, my Office_2013_settings aren't visible.

I have created a group policy with a few settings, and applied to my own computer. It seems to be very nice to me. Please first check the apply status on the client site based on the GPSVC.log
Thinking the issue might be on the way how you create/manage the Group Policies on Windows Server side. Please check the model of how you deploy your group policy, on a domain or OU level? Loopback Merge or Replace? This might affect whether the user
would receive all settings from GPO applied to User or Computer. This article might be useful to you:
http://blogs.technet.com/b/askds/archive/2013/02/08/circle-back-to-loopback.aspx
This might be an issue on Windows server side, you may need to post your question to below forum to get more suggestions:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver

Outlook / Office 2013 PDFMaker is Not working

I cannot activate the PDFmaker in Outlook 2013 (365 Small Business Edition). I have downloaded a trial version of Acrobat XI Pro to make sure I have the latest version of PDFMaker.
I can see the plug-in in the Add-ins Panel. It has a load behaviour of Load at StartUp.... but when i come back to the Add-ins Panel it is still has a status of InActive.
Also, in Word I do not get any extra Ribbon commands (as per Adobe Tutorial.
I am a Win 7 64 bit, using 32 bit Office 365 and have checked that I am loading the 32 bit version of PFFMaker.
Help please. I have spent half a day troubleshooting this issue.
Regards.

No mention of the Acrobat version. You need at AA XI at least and I think the updates are also needed. Otherwise, the upgrade to OFFICE 2013 has just required that you upgrade Acrobat also to be compatible with OFFICE.

Office 2013 ActiveX Controls not working

Hello,
We have two users that are not able to interact with any ActiveX controls in a Word document. When they try to put a check mark in a check box, the whole object gets surrounded by a box like it does when you have it in design mode. Design mode is not
enables and double clicking the object does not bring up Visual Basic. This occurs no matter who is logged into the PC.
I have deleted all files that end in .exd and even ran the MS Fix it tool that does the same. I ran the Office repair tool, both quick and online, and even uninstalled office and re-installed it. None of this
has fixed the issue. Any help would be greatly appreciated.

Hi,
Try deleting one of the checkboxes and place a new one see if it will work then. Or do set the form in design mode, save the document, open it again and place it back in form mode then try again. Do you have code behind the document?
Maurice
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer. Thank You

Office Web Apps 2013 - Word app not working on Sharepoint 2013 but Excel does

Hi there!
We had some problems with Office Web Apps 2013 not working with Lync, and the status of OWA was unhealty so we decided to install some updates for OWA.
We have downloaded November 2013 update for OWA.
We found out a guide for putting updates on OWA and done this steps:
* Remove-OfficeWebAppsMachine
* Installed the november update
* Restarted OWA server
* ran: New-OfficeWebAppsFarm -InternalUrl https://owasrv.domain.local -ExternalURL
https://owasrv.domain.local -CertificateName "certname" -AllowHttp -EditingEnabled
* Restart-Service WACSM
- checked in IIS in the bindings if the site useses the correct certificate
Then we went on Sharepoint 2013 and ran some commands:
* Remove-SPWOPIBinding –All:$true
* New-SPWOPIBinding -ServerName owasrv.domain.local
* Set-SPWOPIZone –zone “external-https”
Now here are the funny things:
* Excel word app on Sharepoint 2013 works
* Word APP not working (screenshot)
* Lync 2013 powerpoint still not working (screenshot)
* status of OWA is healthy
bostjanc

Hi,
The Friendly name field must be unique within the Trusted Root Certificate Authorities store. In -CertificateName, enter the friendly name you gave your
certificate earlier.
Validate the configuration by navigating to the discovery URL of the Office Web Apps server. Like
https://xxx/hosting/discovery
Meanwhile, the issue is related to Lync, I recommend to you to post the question on Lync Server for further discussion via the link below.
http://social.technet.microsoft.com/Forums/en-US/home?forum=ocsclients
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction
with us. Thank you for your understanding.
Tracy Cai
TechNet Community Support

Microsoft Excel 2013 add-in not working after update

I have originally posted this question at answers.microsoft.com and have been re-directed to post here. (http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/microsoft-excel-2013-add-in-not-working-after/298aff03-c90a-4a2a-b67b-07b6f3c7648c)
We are an organization with over 200 users and are currently using Microsoft Office 2013 (Click-to-run install via Office 365 portal), we have noticed that in Excel when we apply the monthly Office update, the add-in (e.g. Analysis Toolpak) would stop working
with the following error message displayed.
I tried updating from 15.0.4631.1004 to 15.0.4641.1003,
15.0.4641.1003 to 15.0.4649.1004, they all gave the same results.
I have checked the captioned file path and it is indeed missing, I think the update mechanism messed up the add-in somehow, a full re-install would fix it as quick or online repair is not doing the trick. This is not the only add-in it is affecting
as there are some 3rd party add-ins are affected as well.
Please advise how we can fix this without needing to re-install Microsoft Office. Thank you!

I don't have 365 or C2R so I can't address your main question, so just a few thoughts which may not be applicable in your setup.
Check the addin manager to see if your addins are listed and ticked. If listed (ticked or not) check the registry to see where the location is written, if ticked look here
HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Excel\Options
and look for keys named OPENx, where x is the order number the addin is loaded
if not "ticked" instead of \Options look in \Add-in-Manager
With a VBA macro or in the VBE's immediate window return
Application.LibraryPath
Assuming you found a listing in the registry do the paths match, if not look in the .LibraryPath to see if the addins got unloaded there into the subfolder \Analysis
If you find the file(s) try un-installing and reinstalling the addins, but browse to the actual folder don't simply tick. If you can't find the files, copy them (from a different system) to the folder indicated by .LibraryPath. In the addin manager uninstall
them if installed, close the manager, open it again and the addins should be listed, tick to re-install.
You say your other addins don't work, I wonder if some mixup has occurred with what Excel thinks is the default path, but note for other addins the default addins path is returned by app.UserLibraryPath
Are you using a Chinese system?

I have an iMac with OS Lion. The Smartart feature for Office for Mac will not work when I am logged on to my personal user account. It works with other user accounts on the same computer, and it works after "safe start". How can I fix the problem?

The Smartart feature of Office for Mac will not work in my user account. It works for all other user accounts on the same computer, and it works after a "safe start". How can I fix the problem?

You may also want to search/ask in the forums run by the people who make the product which is causing you problems:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011

Auto brightness not working in ios6

I updated my iPad (3rd gen) to ios6, but when the update is complete i found that the auto brightness not working, when i use the ipad on dark room the brightness not changing, when i use ios5.1 it changing.. Any solution and actually the problem is on ios or in the hardware? Looking for help asap...

Well my device is different and since it is a iPhone 5, it is not being updated to iOS 6 but the issue is exactly the same. From my mind this could be up to software but also could be from an hardware issue. The thing is that even if it worked before iOS 6 for you the new software could have revealed hardware conflicts since the software interacts different with the hardware for some features. This would be the worst case scenario because I know that normally iPhone 4 devices if not the 8GB model will be out of warranty. For me this is just a small issue since my warranty is still one year :(
I have contacted apple care for this issue and have get the info that it will be escalated to the engineering team, for further investigation. As I know there was also an issue with some proximity sensors at the beginning if the iPhone 4 models and I think there was an software fix for a lot of them. Hope for the best!!!
I have also done a lot of Troubleshooting, reseted settings, content and settings, restored in dfu and recovery mode, restored with new .ipsw (iPhone OS), restored on different pc (so even this step gas downloaded a totally new .ipsw file), first on a Mac!
Next step wis that I will let the battery drain low entirely, a Troubleshooting idea of an friend. This might empower the entire hardware for a restart. I am not really believing in this step but I will give it a try :)

AUto attendant not working

Auto attendant not working .....
If i assign AA script Transfer_v02.aef then i hear an just 1-2 seconds the script after that again it is just ringing ...
Is there Option to set
Please press the extension which you want to Call ...
Eg: if i press 222 that time it should ring the 222 extension
Please help this is the first time i am working on this stuff
If i chnage the scrpt file then i can hear auto attendant not initiazlised.. please find the attched screen shot and back file for more details.
Best Regards
Shabeel

Hi KMS, check the codec used between that GW using the FXO and the CTI RP.
Check also the Calling Seach Space
GW should be able to reach CTI Route Point and CTI ports partition.
If you try other extension it works fine?

Auto keyframe and auto transition not working

auto keyframe and auto transition not working and I have a creative cloud, in addition the auto keyframe works in the getting startel lessons....

In order to use these you need to have the autokey frame and transition selected
OFF ON
and have the first key checked then move the playhead to the new position and it should add the transition.
Did you try this and it is not working?.

Auto dial not working

Auto dial not working
I'm using an iPad 4, with WiFi and Cellular and iOS 8.1.3
In the past if I was searching for a hotel and found one I only had to tap on the phone number and it would dial using either Skype or MagicJack. It worked using Wi-Fi or my data plan. It was an absolutely valuable function especially when traveling.
Now, when I click on a phone number, it says that it's going to exit the program (like Safari) and start a new program. When I click, Ok, nothing happens.
I must have inadvertently changed some setting.
Skype works, MagicJack works, but I must dial the number manually.
I have tried turning "Handoff" off and on then rebooting, turning FaceTime off and on and rebooting (and every combination of those two programs and actions).
To say the least, I am frustrated because it must be something obvious. (to everyone else!)
Any ideas as to how to how I can get it to dial automatically again?
Thanks for any assistance.

IPAD user guide for IOS 8 is available on line at apple -
you can download it in IBOOK or PDF format to refer to when you can't get connected to see it on-line
http://support.apple.com/manuals
Handoff is only for using with multiple devices - Iphone/Ipad/ipod
This is the bit in Handoff on Phone calls
Phone calls
If your iPhone (with iOS 8) is nearby, you can make and receive phone calls on your other iOS devices and Mac computers. All devices must be on the same Wi-Fi network, and signed into FaceTime and iCloud using the same Apple ID.
Make a phone call on iPad. Tap a phone number in Contacts, Calendar, or Safari. You can also tap a recent contact in the multitasking screen.
Disable iPhone Cellular Calls. On your iPhone, go to Settings > FaceTime, then turn off iPhone Cellular Calls.
You may have to use Face Time to make calls from the IPAD -- there are page or 2 on that --

Auto brightness not working on iPhone 5?

On the iPhone 5 - In the settings, when flicking the auto brightness on/off the screen shows no change in brightness - whether in a completely dark room or with the lights on etc. My iPhone 4 has been updated to IOS6 and seems to be working normally (brightness auto adjusts in all situations).
Anyone else have this problem of the auto brightness not working?

There is nothing wrong with the auto brightness.
When you have auto brightness enabled the slider works as the minimum brightness setting with auto brightness.
If you have the slider too high the brightness cant reduce because youre not letting it.
Set your brightness at about 25% and you'll see what I mean.

Lion - 2004 MS Office for Mac will not work

My 2004 version of Microsoft Office for Mac will not work in Lion. I suspect because this is a PowerPC application. My question is this:
Is there any program out there which will map the PowerPC to an Intel format? Other than trying to seel more products, I am surprised that Apple does not supply a mapping program for products made by Microsoft for the Apple devices.

Eric, can you tell me where please? It's not mentioned on the Lion compatibility pages at all. (http://www.apple.com/uk/macosx/what-is/compatibility.html) nor on the 'how to upgrade' page (http://www.apple.com/uk/macosx/how-to-buy/)

After i install Visual-Studio 2013 crystal-report not working

hi
after i install Visual-Studio 2013 crystal-report not working on my Visual-Studio 2010 projects
when i try to open crystal-report i see this:

Hi E_gold,
Crystal Reports forum may be a better place for you.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Office 2013 Silent XML setup works on 64-bit version but not on 32-bit

Hello,
I'm using a powershell script to silently install Lync 2013 (which is part of Office 2013) when domain computers initialize.
The installation is using a XML file to get the configurations and installs only Lync (not Word, Excel, etc). The 64-bit Office version installation I tested several times and is working fine, it installs only Lync 2013, but the 32-bit installation is using
an identical XML file, just changing the 64bit source to the 32bit source, and installs ALL the Office Products, everything. Anyone know whats wrong?
This is the xml file:
<Configuration Product="ProPlus">
<OptionState Id="LyncCoreFiles" State="Local" Children="Force" />
<Display Level="None" CompletionNotice="Yes" AcceptEula="Yes" />
<Logging Type="verbose" Path="%temp%" Template="LyncSetupVerbose(*).log" />
<Setting Id="REMOVEPREVIOUS" Value="" />
<Setting Id="SETUP_REBOOT" Value="Never" />
<DistributionPoint Location="\\grupouniasselvi.local\office\source\office2013_32bit" />
</Configuration>
And starting the setup like this: setup.exe /config configlync.xml

Messing around with the XML file I found a workaround to the problem, explicit added the others products in the config.xml and set to "Absent", like this:
<Configuration Product="ProPlus">
<OptionState Id="LyncCoreFiles" State="Local" Children="Force" />
<OptionState Id="ACCESSFiles" State="Absent" Children="Force" />
<OptionState Id="EXCELFiles" State="Absent" Children="Force" />
<OptionState Id="GrooveFiles" State="Absent" Children="Force" />
<OptionState Id="OneNoteFiles" State="Absent" Children="Force" />
<OptionState Id="OUTLOOKFiles" State="Absent" Children="Force" />
<OptionState Id="PPTFiles" State="Absent" Children="Force" />
<OptionState Id="PubPrimary" State="Absent" Children="Force" />
<OptionState Id="VisualStudio_PreviewServer_SPD" State="Absent" Children="Force" />
<OptionState Id="WORDFiles" State="Absent" Children="Force" />
<OptionState Id="XDOCSFiles" State="Absent" Children="Force" />
<OptionState Id="GrooveFiles2" State="Absent" Children="Force" />
<OptionState Id="TOOLSFiles" State="Absent" Children="Force" />
<Display Level="None" CompletionNotice="Yes" AcceptEula="Yes" />
<Logging Type="verbose" Path="%temp%" Template="LyncSetupVerbose(*).log" />
<Setting Id="REMOVEPREVIOUS" Value="" />
<Setting Id="SETUP_REBOOT" Value="Never" />
<DistributionPoint Location="\\grupouniasselvi.local\office\source\office2013_32bit" />
</Configuration>
It installed only Lync 2013 now, but its really odd that I needed to do this with the 32bit source and a single line did it with the 64bit source. Whats the difference? :(

Office 2013 Auto Archiving not working

Similar Messages

Maybe you are looking for