Office 2013 .SNP files can't be opened by Snapshot Viewer

I understand that the option of exporting a report to a Snapshot was removed from Access 2010 onwards. Our users are currently running Office 2013.
Both the "Email" option from the menu and the "EmailReport" function in the macro builder however still offer the Snapshot report format as an available option, although the .snp files created by these processes cannot be opened by the
current version of the Snapshot Viewer client.
Is there a version of the viewer that will open .snp files created by these processes in Office 2013? If not, why is this format still being offered to the users and/or is there a way to remove this option from the selection list?
Many thanks
Rick

Sanne wrote:
Yup, same here, with fully updated 64 bit system with vlc 2.0.4-4.
The png file gets written and is always 2.0 MB in size. Opening it with Gimp gives the error message:
Opening '/home/me/vlcsnap-2012-11-25-13h57m02s145.png' failed: Error while reading '/home/me/vlcsnap-2012-11-25-13h57m02s145.png'. File corrupted?
Using imagemagick's identify to get info about the file results in:
~$ identify vlcsnap-2012-11-25-13h57m02s145.png
identify: improper image header `vlcsnap-2012-11-25-13h57m02s145.png' @ error/png.c/ReadPNGImage/3743.
Setting output to jpg also works for me.
So, it's not just you, seems to be something's broken somewhere. Sorry, can't help more, but at least I can confirm the behaviour.
Thank you，it looks like that we should report it as a bug

Similar Messages

  • Problem related to PS CS6 ext. on Mac.  Nikon DSLR D610 raw file can not be opened

    Problem related to PS CS6 ext. on Mac. Installation is OK but I can't open picture from my Nikon D610 (Raw NEF format). I get a message "can not open this format ...". Checking Help menu to see if I miss an update the message I get is that I'm up-to-date but at the end Nikon D610 (format supported of course) files can not be opened . JPEG are OK but I work with raw files. Thanks

    What OS are you running: 10.x.x?
    What version of the Camera Raw plug-in do you have?  Do (About) Plug-ins / Camera Raw to find out.
    You need at least ACR 8.3 to open D610 files.  If the Help / Updates process does not work, then there is a manual install process you can do.  The page with the download is for when people accidentally updated to ACR 8.4 and need to roll back to ACR 8.3 due to their OS being incompatible, but the installer on that page works even if you haven’t erroneously updated to ACR 8.4:
    http://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html

  • The file can not be opened because of an error in the header

    I made a recording with Adobe Audition CC and saved this as a wav file. So far I could go open the file with Adobe Premiere Pro CC. But now always the following error message is poping up:
    The file can not be opened because of an error in the header

    Please dont double post:
    Die Datei kann wegen eines Fehlers in der Kopfzeile nicht geöffnet werden

  • Photoshop installation " Windows security, these files can't be opened" ?

    Every time I try to download Photoshop a message appears saying " Windows Security, these files can't be opened, you internet security settings preventing one or more files from being opened" I've tried everything from disabling specific security settings to allowing the download to pass through the internet security fire wall. Any help would be appreciated.

    Tdc01089 what version of Photoshop are you trying to install?  If it is Photoshop CC 2014 or Photoshop CC then please use the Creative Cloud Desktop application.  You can find more details at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • This file can't be opened.

    I have got a file I have worked on for ages that was on iCLoud and it for corrupted and started saying "This file can't be opened."
    So I went back to an earlier version and did the work again saving it on my mac.
    Now it is saying again:
    "This file can't be opened."
    1) Is there any way of salvaging this file?
    2) Given the way apple have made it harder to save incrementally as you work what is making my files corrupted?
    3) The file was a multi sheet spreadsheet. Am I being unrealistic thinking Numbers can handle this?
    Best Tommy Banana

    I suggest backing up the file using Time Machine.
    You can also use the menu item "File > Revert To " to see all versions

  • This file can't be opened because it has been deleted

    When I tried to save an Appleworks 6 document by clicking SAVE (drop down menu) and then inputting a file name and then clicking SAVE I get the following message.
    "This file can't be opened because it has been deleted."
    This problem started yesterday. I also had this problem this morning - but -
    I have just tried to replicate the problem and I can't
    However, has anybody had this problem before? If you did you solve it, or did it just not happen again?

    Although I've only gotten this message when I've had AppleWorks 6 open in both Classic & OS X at the same time, others get it like you with no specific cause. It usually is fixed by using Disk Utility to repair permissions and deleting the AppleWorks 6 preferences. See my user tip, AppleWorks has stopped working correctly, for more on the preferences.

  • Cannot change date and time settings, popup "These files can't be opened: Your internet security settings prevented..."

    When I try to change my date and time settings I get a Windows Security popup that reads: "These files can't be opened.  Your Internet security settings prevented one or more files from being opened. C:\Windows\system32\rundll32.exe"
    I have Windows 7 64 bit.  I also have McAfee SecurityCenter installed.  I have tried turning off my firewall temporarily, but the problem persists.  I am not sure if it is some type of virus.  If anyone could give me some information
    as to what could be causing this I would appreciate it.  Thanks in advance.

    Hi,
    Perhaps, this issue is caused by a sign of corruption.
    Please try to use sfc/scannow to check the System Files.
    Also, You may refer to the following link.
    http://www.sevenforums.com/general-discussion/71526-cant-change-date-time-2.html 
    Important Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Windows 8.1, Office Home and Business 2013: This file can't be previewed because of an error in Microsoft ........... previewer

    Previewer for office files is not working from the same application: i.e. can't preview Excel files when attempting to open one from Excel, same with Word and PowerPoint. I can preview all files from Outlook, and, funny, I can preview files other than Excel
    from the Excel previewer, files other than Word from the Word previewer, etc.
    I can preview all files from Explorer.
    I've looked at previous threads and there are some with the same problem dating back to 2009, all UNSOLVED.
    This is a new lap top, new Windows 8.1 and just-installed Office 2013, and 8.1 and Office have these persistent glitches.
    Very frustrating to say the least.

    Hi CALQ59,
    Unfortunately, the article you were referred to, by Melon, is simply an article that is explaining a behaviour (some would say bug) in Windows and the Office previewer system. There appears to be a limitation that occurs whereby, if you have an instance
    of the Office application open, for which you would like to preview something in an Explorer window, it will not be able to preview the file. To be able to preview the file, this article states that you "must open another instance of the program to preview
    the document." So, either open another instance of the Office application in question or quit any instances of the Office application in question and then preview the file of that same type in your Explorer windows to your heart's content. That is of
    course until the next time you are working on an Office document of some sort and the previewer has a hissy fit!
    This is an incredibly lame bug/limitation that exists in Windows/Office. It's of no current commercial concern to Microsoft to fix it, so we just have to work around it until the problem bubbles to the surface of the development team's bug-fix to-do list,
    if ever.
    Unfortunately, the way software development is going these days it's all moving towards providing Minimum Viable Product (MVP - Yes, this is a term software developers use) for the same cost as a fully functional product. The bar on software QA is falling,
    but the price isn't.
    Cheers,
    David

  • In office 2013 xls file showing the document may be read only or encrypted

    Hi,
    I am using office 2013 home and business edition.
    I got an error while opening the file with .xls extension
    from my computer and the same file if i access from different pc
    it is accessible.
    Please help me it's very urgent........ 

    Hi,
    Do you get the whole error message like this:
    Excel cannot access filename.xls. The document maybe read-only or encrypted.
    If yes, and the files were stored in local disk, this might be happened because you are accessing a file which has read only permission or permission not set at all. Please go to properties of that particular file and uncheck the read only
    check box. if the box is not ticked, then tick and un-tick it and apply. This will replace the file permission.
    If the files were stored in network share, please try to remove the two files from the network share (copy them to your desktop). Open each file and save it and then copy them back to the network share.
    Hope it's helpful.
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How to add shortcuts to user Start Menu and Taskbar or Desktop with using Microsoft Office 2013 Config file.

    Hello,
    How can i add the shortcuts for Office 2013 feature (Word, excel, ext) to the users taskbar or desktop with using config.xml file while installing the Microsoft Office 2013 from SCCM?
    I know how to do that with OCT, but i have another problem if i use OCT. So i have to do it with Config.file, but i don't know which code can i write on config.xml file to create shortcut on desktop or taskbar...
    Regards,

    Hi
    There is a known issue about
    changing the shortcut location for an Office 2013 application:
    When you try to change the shortcut locations for Office 2013 applications in the Office Customization Tool (OCT), you receive the following error message:
    Invalid start in folder. Please try again.
    Then, you add the Start in location for Office 2013 and run a customized installation. When you double-click the shortcuts that are displayed on the desktop, Configure shortcuts does
    not work and you receive the following error message: 
    Sorry, we couldn’t find your file. Is it possible it was moved, renamed or deleted?
    To work around this issue, type a single open bracket ([) in the Start in
    field.  
    In addition, refer to the link below on "Configure shortcuts" in OCT:
    http://technet.microsoft.com/en-us/library/cc179097.aspx#Configure_shortcuts
    Regards
    Tylor Wang
    TechNet Community Support

  • Office 2013 ADMX files not being read by group policy editor?

    Okay so I'm having a real problem with the ADMX files for Office 2013. First of all we have a mix of 2012 R2 DCs with one 2008 R2 DC. The 2008 R2 is currently the primary DC. Here's what I've done so far:
    Downloaded the ADMX files both 32 and 64bit.
    Copied from my machine (Win7) to 2012R2 DC.
    Downloaded and copied directly to the 2012R2DC policy definitions location
    According to the research I've done, the Office 2013 template is supposed to appear under User Configuration\Policies\Administrative Templates. However it doesn't show up no matter what I do.
    I consider myself fairly knowledgeable with GPOs but I'm stumped on this one. Can someone tell me what I'm missing here?

    Hi, 
    Have you copied the ADML files to the language folder in the PolicyDefinitions folder?
    Checkout the below thread on similar discussion,
    office 2013 admx templates
    Regards,
    Gopi
    www.jijitechnologies.com

  • Office 2013 - removing 2010 - avoid Shutting down open 2010 programs

    Hi
    pretty much as topic..
    when deploying office 2013 via sccm to users.. the setup will, without warning, close any 2010 programs that are open.
    How can I avoid this?

    In 2012 you can give conditions to uninstall 2010 before installing 2013. anyway two different versions are not needed on any machines.. so you can run the Uninstall for Office 2010 before running the 2013 office version. Then there is no question of closing
    out the 2010 apps.  If you want to push 2013 with out uninstalling or something.. you can use the application packaging tools like "install shield or Wise packaging studio to add the custom dialog boxes before starting the 2013 office install.
    ----Please vote if this is helpful----- -----Knowledge is Power-------- Ajo Abraham [MCP] [MCTS]

  • When will Office 2013 Offline File Cache for IE add in work with Enhanced mode?

    The Office 2013 Document Cache Uploader IE Plugin is incompatible with IE 11 running in enhanced mode.
    I read that enhanced security mode was enabled by default in Win8 so Microsoft can collect information and advise third party plug-in developers they need to update their stuff to work with it.  Then in November, Microsoft started shipping Win8 with enhanced
    security disabled.  But Win8.1 now ships with enhanced mode enabled...   But... Microsoft's own plug-in with the latest versions don't work with it.  The solution / workaround is to disable enhanced protection mode.  (I don't see this
    as a solution for me, my last virus infection because of insecure IE cost me over $400 to fix.)  When are you going to fix your own stuff?  Or will you retire it like a bunch of other goodies ripped out of Win8.  And Server 2012.  And Exchange
    2013........Lastpass.com has their plug-in working with enhanced mode... Why can't you fix it?  Should not be that tough to fix and to include it in a Office update....

    Hope there will be a fix soon....This should not be marked as 'answer'.  You simply state the fact that it is broken as I did and to disable IE Enhanced (warning/warning) and that is not an answer or a workaround..
    Somebody please at least look at it and come up a quick and cheap, down and dirty way to add this to the trusted zones so it will work?  then you can mark as answer.  Everyone there at Microsoft sitting around waiting for someone else
    or other department to do it.  Lastpass make it work, Logmein make it work, but Microsoft resting on their laurels .......My gosh, I paid $439 for a copy of Office Pro 2013 Professional to upgrade my Office 2010 and it does not work as well as 2010 did? 
    In this respect, the product is a Lemmon.  I already moved to the cloud for Exchange like they wanted me to, by crippling connection with this to my church's Exchange 2003 server.
    It seems the master plan behind this release is to disable function with Server2003 to drive more Exchange server or Cloud hosting sales.  Please make sure the product does what it did before, before you take my money and turn off the lights on important
    feature oversites.
    Any way to hack into Office 2010 and load its cache uploader to run in enhanced zone, or put a link or dll in the trusted zone to make this feature work again?  Can someone at Microsoft at least get it on the project board or bump it up a hundred spaces
    on priority list?  Maybe offer a bonus to the programmer that fixes it.  A weekend on the hiking trail or kayak excursion, or rock-climbing pass..  Microsoft guys like that outdoors kinds of stuff and will work like crazy to get it.

  • Error message: File can't be opened right now because it's being used by another task, such as moving or copying an item or emptying the Trash. Try again when the current task is complete.

    I recently transferred some data from my external hard drive to my desktop, but there was an error transferring some of the files and it couldn't respond, and eventually i simply removed the external hard drive. However, the folder/files are still on my desktop, and when i try to move them or delete them, this error message appears:
    “-folder/file name-” can’t be opened right now because it’s being used by another task, such as moving or copying an item or emptying the Trash. Try again when the current task is complete.
    Since I removed the external hard drive before the files were finished transferring, there is no way for the current task to be completed. How can I resolve this and delete the folders/files from my desktop?

    I just managed to resolve this by going to the apple sign in the top left, choosing force quit (or you could do option+command+esc), then i chose finder, and i clicked relaunch. After relaunching finder, the error message doesn't appear anymore, and I could move these files/folders, and delete them just fine.
    Hope this will help other people who encounter similar problems in the future!

  • Is there a feature in Adobe Acrobat that allows me to create a PDF that has a 'self destruct' capability?  We have a situation where we need to allow people to download PDF files, but after a set time (48 hours), the file can't be opened and read (e.g., s

    Can Acrobat create PDF files that once downloaded - can't be opened after some preset time (48 hours)?

    Hi Edward lkeda,
    I am not very sure of that however as per my knowledge , you can use Adobe send service and provide public link to your users and then after 48 hrs you can delete the file from server and make File-link inaccessible.
    Hope that helps,
    Please revert back for any further query. I will try my best to help you with your problem.
    Regards,
    Rahul Tyagi

Maybe you are looking for