Officejet Pro 8600 Plus Paper Tray Jammed crooked in printer

Paper tray is jammed crookedly in printer. It will not come all they way out of printer and will not completely close (remains 1 1/2" Exposed. How do I remedy?

Hello @LadyLou1, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing jam issues. I'd like to help!
I would recommend starting by removing the ink cartridges, and performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest following the steps laid out in this document:
A 'Paper Jam' Error Displays on the HP Officejet Pro 8600 e-All-in-One Printer Series
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

Officejet Pro 8600 Plus paper tray will not go all the way in so cannot print

Have loved this printer for almost two years but suddenly the drawer which holds the paper will not go all the way in so cannot print. Took it to a so-called tech at Office Depot who said that because you cannot open/remove the tray, there is no way to see what is jamming it. Any thoughts? My first call for tech support was answered by a tech here in the US who said they had experience with it and it could be fixed and asked dme to call again when I was back in the office and at the printer. The next four calls were answered overseas and they all had had no experience with this problem.

Hi maebun,
Welcome to the hp support forums.
Thanks for your query.
Please find the link for fixing paper jam.
Hope this helps
I am a HP Employee.
The opinions expressed here are my personal opinions, not of HP.
Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
Click on Thumbs up if my post helped you.

Officejet Pro 8600 Plus output tray miss-installed

The output tray on my new Officejet Pro 8600 Plus is partially miss-installed. There is a clip on each side of the underside of the output tray which is supposed to engage tips on each side of the frame for the paper tray. Apparently, when the output tray on my unit was installed at the factory, the clip on the left side ended up above the tip which it is supposed to engage. This leaves the output tray slightly tipped to the right and results in output pages not stacking as neatly as they should. This could be easily corrected if someone would tell me how to disengage the output tray from the body of the printer. It's been working fine, I don't really want to have to take it back for an exchange just to correct what could be easily fixed by removing the tray and pushing it back on carefully while engaging both clips.

Hello Goliad,
To get the best answer and assistance to your question please post it on the printer forum. This forum is a dedicated for desktops and the printer have experts available who will be more than happy to help you.
Hope everything works out for you
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

Hi I have just replaced my black XL cartridge and was asked to share info with HP on my
HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g
part of that info gave details to HP of the actual amount of prints so I'm really interested to know what the number of pages I printed off is
does anyone know a way I can find this info out please?
thanks
This question was solved.
View Solution.

Touch the front panel and use the back arrow if needed to get to the home screen. Next touch the four ink droplets at the top right of the screen, then touch "Print Report". Items 12-14 will be the total pages, color pages and borderless pages printed.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Officejet Pro 8600 Plus e-All-in-One - terrible print & scan options

I just purchased an HP Officejet Pro 8600 Plus e-All-in-One an the print options look like they were written by someone from the 1990s. There are no options for lower resolution - only draft, normal, best and no option for black and white - other than grayscale. The print options box is the default box that was originally develped in the 1990s - no kidding. I also tried scanning some items and the box to see the scan is about 5" x 5" and there is absolutely no way possible to see what was scanned. I originally loaded the software using the disk provided witih the printer, but then I went on line and downloaded the "Full" version - which loaded exactly what was on the disk. I can not believe HP is even selling this thing with these types of drivers. I loaded the drivers onto my HP Desktop, running Windows 7 home, 64 bit and my HP laptop running Windows 7 Ultimate, 64 bit. Both HP computers are Intel I7 Quad core computers w/ 9 & 12 Gb of RAM respectively.
What gives? Do I need to return this thing because it certainly does not work properly and is not up to the HP standard we expect - especially for the $300 it costs to buy the thing. I bought this all in one because HP refuses to update the drivers of my older HP scanner to support Windows 7. That scanner showed the preview with a full screen, allowed me to change resolutions of scans, colors, etc.
Has anyone else experienced this type of garbage?

I agree the HP customer services and product services suck. I have an Officejet Pro 8500 and consistently had problems.
I think I'll change to a Cannon printer or another company. It is apparent that HP does not care.

Missing HP Utility (Officejet Pro 8600 Plus); need to reinstall - cannot uninstall printer software

I had to wipe my iMac and resinstall IOS Mavericks (10.9.5). Printer (Officejet Pro 8600 Plus, 9N11g) is working, but will no longer scan (double-clicking icon results in "original item cannot be found") and the HP utility icon on dock is missing, replaced with a "?." I located directions to uninstall printer software so I can reinstall... but there is no longer any HP folder or "HP Uninstaller" on my Mac HD. Neither is there an HP folder within Library/Printers folders. Spotlight search shows no HP or Hewlett-Packard folders on my hard drive.
I have downloaded an "HPPPrinterDrivers3.0.dmg" and "HP-Injket-SW-OSX-Mavericks_v12.34.37.dmg," one of which I'm hoping will contain updated software/drivers to reinstall the printer and hopefully the HP Utility so I can regain scanning function, but I cannot figure out how to remove the current printer software, and I do not know if those are the currect files to use. I understand just deleting the printer will not suffice.
Can anyone provide step-by-step instructions on how to remove the software as well as installation (since I am unclear if I have the correct dmg files)? Thank you.
This question was solved.
View Solution.

Hi,
First I would suggest repairing the disk permissions, then try reinstalling the HP Software.
Follow the steps below to repair the disk permissions:
1. Open the the Applications folder.
2. Go to the Utilities folder.
3. Double-click on Disk Utility.
4. Select the hard drive containing the boot volume.
5. Go to the First Aid tab and select Repair Disk Permissions.
Note: This process may take several minutes depending on the Mac and amount of permissions that need to be repaired. The Progress Log will indicate when the process has been completed.
Once you are done, run the HP-Injket-SW-OSX-Mavericks_v12.34.37.dmg file and follow the steps on screen, be sure to select the HP Scan option while installing to get full functionality of the software.
Please try the steps above and let me know the results,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Paper jams when being faxed on my HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

When I go to send a fax, the paper goes in until about half way then the right side begins to wrinkle the paper and jams up. I have tried several things to fix it but no luck.

Welcome to the forums HerkDia ,
I have some suggestions for you to try for the problem you're having with your Officejet 8600 Plus jamming the paper when you fax.
Check out these guides:
Printer Paper Tears, Wrinkles, or is Damaged while Printing from the All-in-One
A 'Paper Jam' Error Displays on the HP Officejet Pro 8600 e-All-in-One Printer Series
The Automatic Document Feeder (ADF) Does Not Pick Up Paper
Update the firmware: Getting the Latest Firmware and Product Updates
Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
If the steps do not help any, I would lastly recommend calling HP to inquire about a replacement or trade in.
HP's contact info:
If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada,: click here.
Best wishes
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

OfficeJet Pro 8600 Plus connected to network but cant print

My OJ Pro 8600 was previously configured and working properly, but has stopped. I was able to print off of 3 computers and a phone. All have the same IP directed toward the printer and the printer has the IP as well. I have reset the network, reset the printers network settings and the set them back up, ensured the computers have the correct ip address for the printer as well. I have tried to print the from the computers with no luck. The printer does pull a proper IP .120 in a .0 network with default gateway matching all the computers which is pingable. Printer doesn't show in the arp table either.
The computers can't find the printer, neither can the phone and the same from printer to computer when attempting to scan to the computer. I have checked the WIA on all computers, restarted the service also.
Also tried manually setting the IP on the printer and still no luck. My wireless range hasn't changed as I'm still within signal distance from the router with a strong signal.
Tried Print and scan Doctor - no luck
I'm at a total loss minus hooking a computer directly up to the printer at this point.
I keep thinking 'PC load letter' and laugh as this must be something small i'm overlooking..
HELP?
Problem solved - full reset on router and network settings on printer.

@n1cholas
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

HP Officejet Pro 8600 Plus....poor photo printing

Hello,
The printer above seems to print grainy photos on Kodak photo paper. My old Canon MP830 printer (whose scanner broke but can still print) seems to print superior photos with no noticeble graininess. I am using best quality settings in both cases. I would have expected a much newer printer to print much better than an old broken Canon one. Is this a known issue with the printer?
Thanks

There are a few things to check. What paper settings are you using? I would suggest you try setting "Other Photo Papers" or "HP Premium Plus Photo Papers" rather than leaving the setting on Automatic.
Be aware that the Officejet 8600 uses pigmented inks which may not be compatible with some photo papers. You might try HP Advanced Photo Paper.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Officejet Pro 8600 Plus ...paper TRAY wont close all the way?

My Officejet Pro 8600 Plus paper tray will not return to the proper position. This has happened TWICE now, and always about 3 weeks into using it...
I returned the first printer and replaced it with the same because we love the features and ease of use. But now, AGAIN??
I tried printing with it hanging out this time..it will print, but ....COME ON! It makes it real hard to pull out the tray that my paper lays on after printing!
I called HP support the first time, he couldnt help me. Just said replace it. There has to be something I can do a button or something? I cant see it..does anyone else know?

Zadora wrote:
Unofrtunately useless information. By trial and error I have found the only way to replace the tray is to lift the entire printer from the front at about a 20 degree angle and then the tray slides in. Very defective design. Never buy another HP.
It is possible you have a defective unit, I would suggest you Contact HP for service.
It may not be any consolation for you, but the tray works fine on my Officejet 8600 Pro Plus.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Officejet Pro 8600 Plus will not copy even after hard reset

HP Officejet Pro 8600 Plus on Windows 8 OS
Will print from computer; will scan documents & save to computer; will NOT copy document on the unit.
Shut down printer; unplugged from wall and back of unit; held on/off button for 60 seconds; plugged back in; started unit.
Placed document on glass; hit copy; hit black; Unit pulls sheet of paper; unit scans document (squeaks while scanning); after period of time, it spits out paper & reads "copy cancelled", but does not clear or return to home screen.
HELP!!
This question was solved.
View Solution.

Hello,
Please check your private message inbox for the reset I'm going to send you.

HP officejet pro 8600 Plus shuts down on its own while making numerous copies.

My printer HP officejet Pro 8600 Plus keeps shutting down if I print or make more than 5 copies then gives me a message to avoid damage shut down the printer with the on button. Well it shuts down on its own.

Hello mb_bernhardt,
Welcome to the HP Support forums. I understand that your Officejet Pro 8600 Plus printer is giving you a Printer Failure message and then the printer shuts down.
I’ve included the A 'Printer Failure' Message That Might Include an '0x610000f6' or '0x61xxxxxx' Error Code Displays o... document. If the error message that you’ve received includes an Error code there is one set of instructions to follow, and if there is no Error code there is another set of instructions to follow.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Officejet Pro 8600 Plus will not print but is connected and says that the print job is 100% Complete

Hi All,
I'm printing from a MacBook Pro using OSX Lion. It says that Officejet Pro 8600 Plus is connected and that the print jop is
100% complete except that nothing comes out of the printer. I've done all of the test prints and they've printed just fine.
I tired all of the troubleshooting steps listed on the support guide and still nothing. HELP!

Not a reply but another plea for help.
There seem to be so many people with wireless problems that a) it seems silly to start a new thread and b) which one to enter my own plea.
-Printer bought about 2~3 weeks into Sept 2012
-Installed onto Macbook Pro running Lion (full updated at that time)
-Both wireless scanning from printer to computer and initiated from computer worked fine.
-Printer, with full choice of duplex, layout etc, worked fine. (Even left 5star feedback somewhere!)
-Set up eprint. That OK, too. Fine from iPad2 and SE Arc S printing photos.
-Somewhere along the line it stopped communicating with my MBP
-Out of interest, since there seemed to be no problems with an Acer laptop running Vista, I booted the MBP from an external drive on which I'd done a backup of my 10.6 system iMac (>300Km away: can't try that). Installed HP software from disc. Seemed fully functional. Odd. Very odd.
-Restarting with Lion on MBP, tried again. Looks as if it might work, but loses connectivity. Tried manual address on printer.
-Booting from 10.6 system again, reinstalled Lion on MBP (wondering if conflict between HP and Apple updates)
-Reinstalled HP software from disc.
Still didn't work.
-Brought Lion up to date. Downloaded most recent dmg file from HP. Looked for updates. Have applied firmware update to printer
8600 doesn't list my MBP as available computer to scan to
[But all the test pages done whilst in HP Utility, and others, get sent through]
Am getting rather fed-up with all this; never, ever before have I had so much printer problem.
There seem to be a number of Lion users out there with the same problem. So far -but very infrequently tried- other machines/systems seem OK, therefore I am coming to the conclusion that it is an Apple<> HP conflict. If not sorted soon the printer will be returned as it is not fit for purpose. I'll revert to using my seldom problematic, non duplex A3 Brother.
Hrumph
Please help, someone! Either with a pointer to something I've not yet tried or by analysis and rapid availablity of updated software.
Thanks,
Mike W

How or where do I find the printer year? HP OfficeJet Pro 8600 Plus

How can I get the printer year for the HP OfficeJet Pro 8600 Plus? I have looked in printer staus report and the various labels I can find on the printer itself. I'm sure I'm just missing it.I bought it new, so I do not have any reason to think the information was removed prior to purchase. Thanks

The printer status report has in line 47 the date (rounded to the week) the printhead was installed. Except in the rare case the printhead has been replaced this would correspond to the date the printer was installed.

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper. I would like to have a custom size to work with a card making program.

Can you help me out?
I have an HP Officejet Pro 8600 N911a
When I try to print to a custom print size (2.75" x 6" in my case), I get the same error everyone else is reporting: "Paper detected does not match paper size or type selected. Make sure the paper size or type is correct to continue the job."
I am currently trying to print using Microsoft Word for Mac 2011 version 14.4.5, but I have the same problem with printing from Adobe Reader 9.8.5 or Preview 8.0.
I am running OS X Yosemite 10.10.
My printer's firmware is "up to date" as of 28-Aug-2014.
This is what I did:
1. Open System Preferences from the Apple menu.
2. Click on the Printers & Scanners icon.
3. Click on the + sign under the list of printers to add a printer
4. Click on IP
5. Enter my IP address in the Address field (verified as "valid and complete host name or address")
6. Ignore Protocol field (default is Line Printer Daemon - LPD)
7. Ignore Queue field (default is blank for default queue)
8. Ignore Name field (default is IP address)
9. Ignore Location field (default is blank)
10. Under the Use dropdown menu, I select "Select Software"
11. HP Deskjet 9800 is not an option.
I searched for 9800, but there is no HP printer with that number in the options.
I tried selecting "HP DeskJet 980C - Gutenprint v5.2.3" to see if that would work, but I received the same error message as above. I tried selecting other random HP printers, but so far I've had no luck.
I've been googling about for a way to manually add a printer driver to this "Select Software" list, but I've found nothing (apparently, no one else wants to do this). I did not find a driver download for the HP DeskJet 9800 for OS X Yosemite 10.10 on the Drivers & Software section of the hp.com website.
Additional details on settings for Microsoft Word for Mac 2011 version 14.4.5:
Selected File > Page Setup from menu
Under the Paper Size drop down menu, I selected manage custom size.
- Click + to add a paper size
- Enter "2.75" in width and "6 in" height in the paper size fields.
- Enter "0 in" as the User Defined Non-Printable Area for top, left, right and bottom.
- Double-clicked Untiled in the custom size list and rename the size as Receipt
- Click OK to return to the Page Setup dialog box
Under Settings: Page Attributes:
- Format for "HP Officejet Pro 8600"
- Paper size: Receipt
- Orientation: "tall/portrait"
- Scale: 100%
- Click OK
Select Format > Document and set all page margins to 0.25"
Thank you.

Officejet Pro 8600 Plus Paper Tray Jammed crooked in printer

Similar Messages

Maybe you are looking for