OfficeJet Pro 8600 Plus Wireless DOES NOT WORK with Mac Mavericks Based Network

Replaced my Brother system with the HP OfficeJet Pro 8600 Plus yesterday. There are many positive features of the 8600 Plus that prompted me to purchase it...
Modular Design
Large legal sized Scanner
Standard/Legal Paper Printer
Copy
E Print Capability
High Yield / Affordable Toner Replacements
Unfortunately, I discovered the Wireless network capability is less than desirable. After hours of installing, reinstalling, work arounds, internet solution searches, it just will not work. If you are able to get the printer to work on your network (with router), the scanner will not be visible, vice versa, etc...etc...etc...
HOWEVER, I did discover this solution. If the unit is near your base computer, install it to your computer with a usb connection. That allows you to have scanning and printing from that unit. Then you can connect the unit through its ethernet connection to your router. From there all computers can print within your network. It's not the best way to connect a WIRELESS printer, but at least it works.
I'm not certain why HP and Apple can't find a solution, but I never found anything on the net that worked. The problem seems to stem from the new Mavericks update from Apple, but I'm really not sure. I wasted an entire day of productivity attempting to make it work. I'm posting this so you don't make the same mistake. If you happen to know a verified solution, then I would welcome the information. Best of luck!!!

It may be a mac driver issue. Try installing the bootcamp update for your version of vista from here:
http://www.apple.com/support/bootcamp/
I'm not sure if this is supposed to work since I've never tried mac hardware at 5ghz on windows before...

Similar Messages

Officejet Pro 8600 Plus duplex printing not working

I am running Mac OSX leopard (10.5.8) and just bought the officejet pro 8600. Everything seems to work great except I can't figure out how to print on two sides. The option isn't allowed in page setup
I have checked the settings on the printer and can't see anything to indicate how to switch on the option for double-sided printing.
Thanks in advance for the help.
This question was solved.
View Solution.

Hi,
Please follow the steps below to configure the driver for automatic duplex printing:
1. Verify the duplex-printing accessory has been installed properly. To verify this open the System Preferences and go to Print & Fax. Open the print queue of your printer. Click on Printer Setup and from the tab menu choose Driver. Verify the box next to HP Two-sided Printing Accessory (Duplexer) is checked.
2. On the File menu, select Print. The Print window appears.
NOTE: The Print window might be minimized. Click the blue triangle next to the printer name to see all available settings.
3. In the expanded Print window you will find next to Copies the checkbox for Two-Sided. Check the box.
NOTE: If the checkbox does not appear within the specific application print dialog, skip this step.
4. To select the binding type click the lowest selection box listed as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
5. Select Layout from the drop-down menu.
6. Set the Two-Sided option as Long-Edge binding (Portrait), or Long-Edge binding (landscape).
You may save the settings for future use by clicking Presets > Save Current Settings as Preset...
Please let me know of any problem,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

My HP Officejet Pro 8600 Plus printer will not recognize my wireless router passwrd

My printer was working fine but when I turned it on today it wouldn't connect to my wireless router. I try inputing the correct password and the printer gives me this message......"the WPA security passphrase configured on your HP printer does not match your wireless router setting" .
I have entered the password several times and I know what I have entered is correct

Hi @Southglen,
Welcome to the HP Forums!
I noticed that your HP Officejet Pro 8600 Plus printer will not recognize your wireless router password. I am sorry to hear this, but happy to help!
I would recommend to go through this guide, How to Find the WEP or WPA Key or Password for Your Wireless Network, just to double-check your wireless password, in case it might have changed.
I would also suggest a hard reset, by going to this post How to perform a Hard Reset, by @Rich1.
After those two steps, I would suggest a firmware update, Getting Printer Updates for HP Officejet Pro 8600 (N911), Officejet 6600 (H711) and Officejet 6700 P....
Let's start with these steps, and we will go from there!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Can the mac air print to HP OfficeJet Pro 8600 Plus Wireless e-All-in-One?

Can the mac air print to HP OfficeJet Pro 8600 plus Wireless e-all-in-one?

AirPrint is an iOS 5 protocol. It is not used on the Mac or Lion. What you *can* do is add the wireless printer to you network and print from the mac using that.

I installed firefox 10 - it was offered on startup. I absolutely does not work with a cloud based program I use (corecon) and I want to GO BACK TO FIREFOX 9. how do i do this?

firefox 10 ABSOLUTELY does not work with a cloud based program, Corecon. I want to UNINSTALL firefox 10 and GO BACK TO FIREFOX 9 . How do I do this? This is a subscription service, you may not be able to try it. v9 works fine.

http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox
http://www.mozilla.com/en-US/firefox/

Officejet Pro 8600 Plus wireless printing dilemma

Hello,
I recently purchased the Officejet Pro 8600 Plus for my dorm room in college. However, the school requires all devices that want to use its wi-fi to register their IP addresses through detection software in addition to the default log-in information just to use the wi-fi. Now, here are the items I currently have:
- the printer itself
- the printer USB cable
- a few ethernet cables
- a personal router
- an ASUS wireless dongle (plugs into PCs via USB, has ethernet port but the device itself can create a hotspot and its own "network")
- one of the built-in school routers (high up on the wall)
The question is, is there a way I can set up any type of wireless printing in my dorm room? Is it possible to buy two wireless USB attachments that hook up wirelessly to my printer and computer, acting like bluetooth? Thank you!

Range extender improves the signal strength and cover a bigger area, but adds an extra layer of communication so will have slower response. It helps connecting devices far apart, but may cause delay and "loss" of communication, especially "two way" communication which is the problem you are experiencing.

HP OfficeJet Pro 8600 Plus Firmware version not current on the HP Downloads Page

My HP OfficeJet Pro 8600 Plus came with Firmware version CKP5CN1334ER which the printer update says is up-to-date. The HP downloads page shows CLP1CN1322CR as the current version. Can you tell me what the differences are in version 1334 from the one (1322) on the web page?
It would be nice to have the latest version posted for download to prevent confusion.

Same question here.

HP OfficeJet Pro 8600 Plus - "Scan to Computer" issue on Mac OSX 10.8 or 10.9

Hi...
I have started experiencing the notorious "scan to computer not working" issue on my 1-month OfficeJet Pro 8600 Plus, after having used the feature a number of times flawlessly.
There are a lot of potential solutions mentioned in dozens of relevant posts for both Mac and Windows, e.g.:
"Failed to open a session on the device"...
Scan to computer does not work...
Problem scanning to computer with an 8600 wireless
Unable to enable print to computer...
Enable Scan to Computer - Communication Error
Officejet Pro 8600 Utility does not show my Mac computer in scan settings
A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning
HP Wireless All-in-One Printers - Communication Error between the Scanner and Your Computer...
Etc.
However, in my case, no solution works, after several frustrating hours of trying to fix the issue, in Mac OS X Mountain Lion (10.8), or after upgrading to Maverics (10.9).
The behavior of the device points to a software issue, since:
The printer is visible on the network
The print function has been working fine
The HP Scan function works
The generic Scan function from System Preferences works (although in earlier times it did not, or it stopped working soon after invoking it)
The "Scan to Computer" option does not appear in the HP Utility screen (although occasionally, after random sequences of unistalling and installing the software, it reappears)
The HP Installer crashes before completing the installation (this is a latest symptom, apparently happening before unvoking the HP Setup Assistant, which still works fine)
As already mentioned, I have tried all possible solutions, including software and firmware updates, Apple drivers, HP drivers (full featured software), clean (un)installations, followed by computer and printer restarts. Nothing seems to work.
The "Scan to Computer" feature of the 8600 always works on my Windows 7 laptop, after initial configuration.
The next step will be returning the device for a refund, but before resorting to that, I am giving it a last chance, in (the unlikely) case there is something new I have not tried yet.
Thanks,
PNS

facman
I am linking you to an HP Support document titled “Uninstalling the Printer Software” below. I am also providing you the link to the HP software for your printer titled “HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8” below as well.
Follow the first document and uninstall the software. Reboot the computer than download and install the linked software. This should resolve your issue.
Uninstalling the Printer Software
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02259020
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
http://ftp.hp.com/pub/softlib/software12/COL44234/mp-107214-1/Officejet-Pro-8600_v12.23.0.dmg
Please feel free to re-post if you have any further questions or concerns we are here to help.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My banking website ask me to install latest IE . but IE8/9 does not work with mac

My banking website ask me to install latest IE . but IE8/9 does not work with mac

You should contact your bank to see what browsers they support and until then ignore the message. The chances are very good they suppport Safari and Firefox, both are great browers.
Roger

Wireless printing on HP 6500A Plus -wireless does not work

windows 7, linksys E2000 router, sony vio computer wireless N.
No issues printing by USB. When using wireless, prints first few lines, then slows to a stop. Loses feed from router and disconnects. Tried disabling all firewalls, removed antivirus, etc - nothing is working. Not the only computer in household with same issue as well - Toshiba running xp is having same problems. Need fix or I will trash printer and never purchase HP again and I have long been an HP customer for printers.

There have been a few issues with printing using the new E-series Linksys routers. Make sure the router has the latest firmware. If that does not work, set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). Yours is 192.168.1.100 to .149. Let's use 192.168.1.200 for your printer.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Macbook Pro Pinch/Zoom feature does not work with Firefox 6

Can someone please tell me how to fix this major problem?
I can not get the Pinch/Zoom feature on the track pad to work on my Macbook Pro. I am running OS 10.6.8.
I have seen this below in other posts, and have tried it, but it STILL does not work !!!!
'''''Some gestures have been removed in Firefox 4.
'''You can restore the zoom feature by changing the values of the related prefs on the about:config page.
'''browser.gesture.pinch.in -> cmd_fullZoomReduce<br>
'''browser.gesture.pinch.in.shift -> cmd_fullZoomReset<br>'''
'''browser.gesture.pinch.out -> cmd_fullZoomEnlarge<br>'''
'''browser.gesture.pinch.out.shift -> cmd_fullZoomReset<br>''''''
'''To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website.'''
'''If you see a warning then you can confirm that you want to access that page.'''''''''''
Please someone help me - this is a great feature and its really pissing me off that I can't use it.
HELP !!!

I'VE TRIED THIS:
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
I'VE TRIED ALL OF THE ABOVE NUMEROUS TIMES AND IT DOES NOT WORK ON MACBOOK PRO AND FIREFOX 6.
CAN ANYBODY HELP? THANKS ♥

HP Envy 5530 e-all-in-one Does Not Work With Mac

Just bought an HP Envy 5530 all-in-one. It does not print through Safari and possibly other Mac applications. Does not frame the page properly even with "print page" and prints slower than 1 page per minute, even with no background images. My old HP had no problem with Safari. Phone support tells me there is no driver or fix. So I will return the device. Seems crazy. I now see othr commenters saying it doesn't work with Mac. If HP's no longer works with major Mac applications, they will be returned in droves. Anyone know why or know of a fix?

I am having the same issue. Did you ever find a solution?

HP Officejet Pro 8600 Plus Wireless/Wired Network Sleep Problems

Okay, it's taken me a while to figure out exactly what causes this problem, but now I have, I'm no closer to resolving it.
My setup is as follows:
Printer connected wirelessly to my Internet switch with a strong wireless signal.
The PCs I print from are on a combination of wired Gigabit connected to the same switch and wirelessly.
If I turn the printer on and print straight away from either a wired or wireless PC, it works.
If the printer goes to sleep, then printing from a wired connection won't wake the printer and causes the job to fail, but printing from a wirelessly connected PC wakes the printer and job prints okay.
After the printer has been awoken by a wireless connection, the wired connected PC still cannot print and I get the message "Unable to Communicate with Printer".
I have installed HP Print and Scan Doctor and checked the printer with it, but it finds no problems, yet if I send a test page from Doctor, it still doesn't print when wired.
I can reproduce this problem on a laptop with both wired and wireless connections by letting the printer go to sleep, turning wireless off on the laptop, and with the wired connection trying to print. Then when the print has failed, turning the wireless on again and printing again, works.
The printer has a static IP address assigned on the DHCP server, but while I expect having a wired connection to the printer might resolve this problem, the printer is located away from a network port.
The firmware reports to be up to date and all along the printer responds on a browser link from either wired or wireless connections.

Honestly, this is a pretty common problem with this model. I have found that setting a static IP address outside DHCP range and on the printer can help:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Officejet Pro L7590 Scan feature does not work after power failure!

Hello guys,
I have an L7590 set up as a wired network printer through a netgear router. I am running Windows Xp. I installed the printer and everithing was working fine, but whenever there is a power outage the printer scanner does not see the computer. I am able to print from the computer but the twain feature is the only thing affected. I checked the router "Attached devices" and the printer is listed. The only way that I have being able to repair the problem is doing a complete uninstall and reinstalling the printer software again. Does anybody knows why this happpens or how to fix it? thanks a lot.

I am having a very similar problem. Everything will be working fine, and then one day the scan function will not work. It will print fine but it wont scan. It locks up my computer and then I have to reinstall. Now it has happened and I cant get it to work even after a reinstall. Printer works fine, but scanning wont work. I am able to ping the printer and nothing has changed on my computer. I am lost with this one. I hope someone is able to answer this.

OfficeJet Pro 8600 Plus - N911g - refuses to print with an exhausted cartridge (yellow)

Hi,
I owned this printer some months ago, and I have already substituted the black cartridge some times ago.
In fact, I usually use the b&w option to print my documents, and I use very little to no colors, instead.
Before deciding to buy this printer I had read the printer guide, which reports (translated from Italian):
[Printing with one or more cartridges exhausted]
The printer can work with one or more cartridges exhausted. However, printing with exhausted cartridges slows the printing process down and lowers the quality of the documents printed. If the black cartridge is exhausted, blacks are not going to be really dark. If a color cartridge is exhausted, the result is in the grey scale. As soon as possible, replace the exhausted cartridge. Don't remove the exhausted cartridge before you can replace it with a new one. [...]
(screenshot attached)
The downloadable user-guide reports (no translation):
[Color cartridge very low on ink]
To temporarily print using black ink only, click Cancel Print and then re-send the print job. The
Use black ink only? message appears before the job prints. The empty cartridges will need to be
replaced soon.
(screenshot attached)
So, when I decided to go for this printer, knowing I substantially use black only for my studies and my work, I did take care of reading the entire printer guide and look for these specific official declarations by HP on the printer functionalities.
Additionally, I took care of disabling any HP protection and pages control on the cartridges before installing them, using the printer menu.
Today, instead, I've found out the printer won't print with an exhausted yellow cartridge. This is what the message window says (translated freely, again, from Italian):
[Exhausted cartridge]
HP 951 SETUP Yellow
Replace the cartridges in the list to be able to print.
HP advises not to remove the cartridge until you have a replacement one ready for installation.
Buttons are: [Buy online...] [Cancel printing] [?]
(screenshot attached)
[?] leds to the words I've reported earlier.
I still have the "print just with the black cartridge" option enabled.
I tried cancelling the print and sending the print job again multiple times, as it is described in the guide, but no "Use black ink only?" message appears.
Before invoking and thinking to the "fraud", I ask, how am I going to be able to print, then?

The manual indicates the printer can temporarily use black only once a color cartridge is low. Once the cartridge is depleted it will need to be replaced, otherwise damage to the printed may occur.
HP and other printer manufacturers have different printer technologies for different needs.
Some have printheads built into the ink cartridges. These printers can typically print with one or more of the colors completely empty, or even with color or black (but not both) cartridges removed. The Deskjet 6980 series is an example.
Other printers have separate ink supplies and replaceable printheads. An example would be the Officejet 8600. The printhead in these printers can be replaced if they are damaged by running the printhead with colors out. Some of these printers will allow printing with a color out, other will not. If the printer is run without ink in one or more colors the printer may be damaged, but the user may be able to recover without having to send the printer for service.
Other printers have permanent printheads. To run these without some ink in all the colors would risk causing damage to the printhead due to clogs, air ingested in the printheadvor burned out printhead firing resistors. The Photosmart 3310 series is an example of this type of printer. For printers with fixed printheads this could require service to get the printer to print properly again when the ink is finally replaced.
The document here describes how ink is used. While the document is written for HP Inkjet printers the same principles apply to inkjet printers from other manufacturers.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

OfficeJet Pro 8600 Plus Wireless DOES NOT WORK with Mac Mavericks Based Network

Similar Messages

Maybe you are looking for