Offline Confirmation

Hi SAP Gurus,
My client is implementing SAP SRM 7.0 (Classic Scenario) with ECC 6.0 as backend. Appreciate if I can get some help on the below requirement:
1. When invoice is entered in ECC, system will check whether the GRN has been done for this invoice by the requester of the shopping cart. If not, the system will send a notification mail to the requester of the cart to do the GRN. I understand that this can be done by workflow configuration in ECC.
2. Client wants the requester to do the confirmation in either of the two ways:
i. A link of the srm portal should be sent in the email notification, so that user can log into the system by clicking on the provided link and create the confirmation. If the user has already logged in, then the link will take directly to shopping cart without asking for the user name and password (SSO).
ii. Offline confirmation: This is most important one. A button or another link should be provided in the notification mail, so that requester can click on the button / link to create the confirmation directly without logging into SRM and this in turn will post the confirmation in SRM. If not possible to post in SRM, then if it can be posted in ECC, then it is also fine.
Please let me know if anybody has implemented this kind of scenario.
Appreciate for the help!
Regards,
Aswini

Hi,
How are you going to handle the "Quantity", "Reference Number" and "Delivery date" ?
Are you planning to use any mobile device? or just normal office email?
One of my client has implemented Notification program which checks delivery date in PO and send notification if the Confirmation is not created after 2 days. User has to manually type in the "Quantity", "Reference Number" and "Delivery date". They said it is too late sending notification at Invoicing phase.
Regards,
Masa

Similar Messages

[iOS][Playlists] Offline Music Confirmation Button/pop-up (mobile app)

In the mobile app (IOS and Android), I would like to see a confirmation button or pop-up window if I push the button to make a playlist available Offline OR when removing a playlist from Offline availablility.
OR if possible, instead of just a button, make the "Available Offline" slider longer so the motion is more deliberate, rather than a simple tap.
In trying to get used to holding a new phone (iphone6) I accidentally removed a playlist from offline availability. I tapped the button again and managed to save about 3/4 of the playlist, but it still meant having to sync up about 100songs again.
Thank you,
-Dave

Updated: 2015-07-27Hello and thanks for the feedback!
A similar idea has also been suggested here:
https://community.spotify.com/t5/Live-Ideas/Double-check-when-people-touch-the-offline-button/idi-p/1034137
Add your kudos and comments there please! ;)

HP AIO Remote shows wireless printer offline when it is online and can print to it.

HP AIO Remote installed on my Windows 8.1 Yoga 2 shows my wireless printer is offline, when it is online and I can print to it wirelessly. How can I get it to recognize my wireless printer is online wirelessly? AIO Remote will only recognize the printer is online when the USB in connected to the Yoga 2.

Hi rpmcintyre,
Thank you for the additional information. I apologize for misunderstanding. I just want to confirm that the HP AiO app that you downloaded onto your Windows 8.1 computer is showing your printer as offline when you are able to print wirelessly to the printer.
I have two different documents for you. The first one is How to Use the HP AiO Remote App for Windows 8. It has a FAQ section at the bottom of the document with trouble shooting steps. I have also included the Supported Printers for the HP Scan and Capture App.
If the above documents don’t assist you, would you please let me know which make/model/product number of HP printer that you have? How Do I Find My Model Number or Product Number?
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How can I keep just one of two accounts offline in Mac Mail?

I recently switched from Comcast to Cox Cable. Cox has a known issue with push notifications and email doesn't show up at regular intervals. You have to go offline and back on or quit Mail and then open it again to see new messages. It's a pain but it works.
I still have my Comcast email account enabled on Mac Mail because I need access to old emails and if I disable it (via Preferences), it disappears. I want to take it offline but clicking on the Comcast account and "take comcast.net offline" always takes my Cox account offline as well. I can't get them to both stay online because the Comcast account hangs when it can't connect to Comcast. This really exacerbates the already annoying issue of having to take Cox offline and back on.
I tried going into the Comcast account via Preferences and unchecking "include when automatically checking for new messages" but when I did so, it kept the Cox account from receiving any messages at all (I confirmed this by checking webmail, and by toggling it on and off to see what happened).
I need some solution that allows me to see the comcast account in mail without having it be active in any way. I have other mailboxes archived but that process doesn't offer the search capability that I need.

Aha! I have been doing just that. However, what has been tripping me up is that I am also used to clicking the Go Online/Go Offline toggle button on the top menu bar when I manually check for messages on Cox. Apparently when you take one inbox offline, that button switches to Off even though the other inbox is still online. If I just ignore that button and go on or off via the cox mailbox listing, it keeps comcast from being reactivated.
Thanks so much for helping me think this through.
Edited to add: I removed that dang button from my menu so I can stop clicking it.

Sharepoint 2013 search error - The search application 'Search Service Application 1' on server is not provisioned.Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running on the server.

Hi All,
I'm getting the below error in My SHarepoint 2013 search Administration page.
Crawler background activity - The search application 'Search Service Application 1' on server "" is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running
on the server.
and when i click on Crawl Log and content source
it throws the below error
The search service is currently offline. Visit the Services on Server page in SharePoint Central Administration to verify whether
the service is enabled. This might also be because an indexer move is in progress
When i check the search status
Get-SPEnterpriseSearchServiceInstance, it shows all the components are online.
As of now search service application is online and search is working.But not sure why it throws the above error.
I have restarted timer service,search service in services.msc and cleared the sharepoint cache as well.
But no luck,This is happening in my prodcution environment.
Any help will be greatly appreciated.
There are the logs i have found
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.73 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djs2 High [Forced due to logging gap, cached @ 05/23/2014 13:03:22.76, Original Level: VerboseEx] {0} d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.80 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General 8nca Medium Application error when access /_admin/search/listcontentsources.aspx, Error=The search service is currently offline. Visit the Services
on Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.   at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Runtime tkau Unexpected Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on Server page in SharePoint Central
Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.    at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)
at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on
Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General aat87 Monitorable  d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
- Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm.     at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3-c3e4-4097-85fd-aa5248346d2e d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e)).
Execution Time=109.695855199474 d4c6939c-b10d-4000-6d95-14caeefe67df
Anil Loka

Please try below mentioned steps:
1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
Please ensure that you mark a question as Answered once you receive a satisfactory response.

How can I display application offline page when OAS is offline?

I am using IIS with oracle_proxy.dll redirecting to my oracle application server. When I do maintenance on the application and stop the OAS service the end-user gets the HTTP 500 - Internal server error from Internet Explorer. I would prefer for them to see a custom page that displays that the application is offline for maintenance. I tested with IIS custom error pages but that is not where the 500 page is coming from. The page being displayed is the IE friendly HTTP error message. I can't see how a configuration on the Oracle application server would help because the service is offline. Is there anything I can do to explain to the users that this is a scheduled maintenance and display a more informative page? I understand the solution may involve stopping, changing a configuration file in IIS and restarting. If so how can I script that so it can be easily done and what is the easiest way to do it?
Thank you for your response in advance.
Trying to make oracle more friendly, Jon.

I just wanted to confirm, are you using Oracle HTTP Server?
Regards
Mehmood

Time capsule only allows 2 devices at a time as a router. If I am using the iphone and macbook pro, it bumps the roku offline. Any suggestions?

time capsule only allows 2 devices at a time as a router. If I am using the iphone and macbook pro, it bumps the roku offline. Any suggestions?

At a guess you have cable internet connection.. please confirm exactly what you have.. two public IPs are allowed by some ISP.. once you use up the two IPs, there are no more..
Make sure the TC is in router mode. And to get it working you probably need to shut off the cable modem.. if it has battery backup remove the battery.. try 5min off .. if not long enough try 20min off. then overnight. The ISP equipment must reset to allow a new MAC address to capture the IP.
If you cannot work it out.. plug in the old router again.. and set the TC to bridge mode.. which I suspect it is in now.. and plug it into the main router.. it should work fine like that.

Windows 8/8.1: Printer Offline Problems

Windows 8/8.1: Printer Offline Problems
Are you getting an error that your network or wireless printer is offline when you try to print?
When you print to your network printer, does it fail, and when you check the printer status it says Offline?
Do you have problems printing to your wireless printer after your PC has been asleep?
If you answered YES to any of the above questions, then you have a problem with your network printer being offline. After some investigation into this problem, we recommend updating windows. Run Windows update to check that your version of Windows 8 is up to date.
There are a few windows updates that may help with this problem
1) Install this Microsoft patch to make sure this private-public-private network issue does not reoccur. It is part of the April 2014 Windows Update package for Windows 8.1 and Server2012 R2 (http://support.microsoft.com/kb/2919355).
2) Install this Microsoft patch for the WSD service. http://support.microsoft.com/kb/3000461
If this does not help, then please follow the steps list below which will give you a Workaround that may help with this problem.
Assign the printer a static IP address
An IP address is an Internet network address that the computer can use to communicate with the printer. Enter a static IP address to make sure that the wireless connection remains stable. Follow these steps to assign the printer a static IP address.
Get the printer IP address.
Press the Wireless button on the printer control panel to view the network settings.
Access the Network menu on the printer control panel.
Print a Network Configuration Page or Wireless Test Report page.
Once you have the printer's IP address, open a new web browser window or tab.
Type the IP address in your web browser's address bar, and then press Enter.
Make sure that you type the IP address into the browser's address box. If you type it into a tool bar search box, the EWS will not open.
If the message 'There is a problem with this website's security certificate' appears in the web browser when you try to open the embedded web server (EWS), or when you navigate within the EWS, click ' Continue to this website (not recommended)'.
note:
Choosing 'Continue to this website (not recommended)' will not harm your computer while you navigate within the EWS for your printer. If you encounter this error outside of your printer's EWS, your computer could be at risk.
If the browser fails to open the EWS after you click 'Continue to this website (not recommended)', refresh the browser window.
The Embedded Web Server (EWS) for the printer opens and confirms that the printer is on the same network as the computer.
In the EWS, click the Network tab.
In the Wireless section, click the Network Address (IP) or IPv6 configuration, depending on your network setup.
Click Manual IP, and then click Suggest a Manual IP Address. A manual IP address, Subnet Mask, and Default Gateway displays.
After the manual IP address populates, click Manual DNS Server.
note:
Keep a record of the manual IP address for reference.
On the Network Configuration Page you printed earlier, locate the DNS Server addresses, type the DNS addresses in the Manual Preferred DNS Server and Manual Alternate DNS Server fields, and then click Apply.
If the DNS addresses are not listed on the Network Configuration Page, or if you have trouble accessing the network or Internet with the original DNS addresses, use one of the following methods to obtain DNS addresses.
Method one: Use publicly available DNS server addresses
Configure the printer using publicly available DNS server addresses. To find available DNS server addresses, search online for 'public DNS servers'.
After you find public DNS server addresses, type the addresses in the Manual Preferred DNS Server and Manual Alternate DNS Server fields, and then click Apply.
Method two: Get the network DNS information via your computer
Select your operating system, and then use the following directions to obtain the DNS server addresses.
Right-click the Start button () or the lower left corner of the screen, click Run, type cmd, and then press Enter.
When the command window opens, type ipconfig /all, and then press Enter. Information about the computer's network displays.
Scroll to and locate the DNS Server addresses.
In the EWS, type the DNS addresses in the Manual Preferred DNS Server and Manual Alternate DNS Server fields, and then click Apply.
Print a test page to make sure that the printer's IP address is the same as you assigned.
Right-click the Start button () or the lower left corner of the screen, click Search, type HP and click your printer in the results. Click Utilities, and then click Update IP address to update the address in the software.
Adding a Wireless Network Printer using Control Panel
Go to Control Panel and choose Devices and Printers
Click on Add Printer
The PC will search the local network and display the network printers.
Choose the printer and select Next
The system will then try and auto select a compatible driver
Select the current driver and Click Next
The system will then ask for a name for the printer. The user can change the name and then click Next
The User can then choose to share the printer
The user can select to make this new printer the default and then click Finish.
The new printer is now setup but this printer may be using the In OS driver (Class) rather than the HP Full Function driver.
To change the printer to use the HP Full Function driver follow the following instructions. I would recommend changing the driver to the HP Full Function driver as the User can then use features such as Custom paper sizes.
Go back into Control Panel and choose devices and Printers, right click on the newly created printer and choose Printer Properties
Choose the Advanced Tab
Click on the driver section drop down and choose the Driver for the printer that does not have the words Class driver after it.
Click apply and then OK and the driver will be changed to the HP Full Function driver for the printer.
The user should try this configuration and see if they still experience problems.
Please Note:
DO NOT Remove the Original Printer Icon from Devices and Printers as the HP Printer Assistant will stop working.
JonW
I work for HP

I have the printer offline problem. It started when I ran out of toner. I have now installed a new toner cartridge.
Your solution does not help me because I have tried to install Win8.1 and it failed.
I would just reinstall my printer but I have a long list of items in my print queque and I don't want to lose them.
Is there another solution?
Or is there a way I can save the print queue?
Mike

Epson Workforce 500 and HP OfficeJet Pro 8500 - "Printer Offline"

This week I downloaded an Epson printer driver update from Apple's Software Update. I use an Epson Workforce 500 with my Mac Mini computer at my office. Since installing Snow Leopard originally I had experienced no problems with the printer but assumed that if Apple was telling me to install a driver update, I should do so. Big mistake!
After installing the driver update I was unable to print anything. When attempting to print a page from Safari or MIcrosoft Word, everything initially seemed ok, until I saw my printer icon bouncing in the Dock with a yellow symbol indicating "Printer Offline." After searching the Apple site and various discussion boards I spent an entire afternoon attempting all of the recommended fixes with no results. Since I cannot operate my business without a printer, I decided to simply purchase a new printer hoping that this was simply an Epson problem.
I am now the proud owner of an HP OfficeJet Pro 8500 Premier All-in-One. Unfortunately I am still suffering from the "Printer Offline" message whenever I attempt to print anything. After spending another afternoon on the phone with a tech support person from HP, I am still unable to print. I have done all of the following:
Disconnected and reconnected all cables between the computer and the printer.
Switched the USB cable to a different USB port on the computer.
Restarted the computer and the printer.
Unplugged and replugged the computer to reset it.
Checked to confirm that the printer does show up under USB on the System Profiler.
Deleted any old print jobs in the print queue and made certain that the printer was not in pause mode.
Tried to print from various programs with the same result.
Although this printer does appear in the printer list, deleted it and then added it again under the Printer and Fax area of System Preferences.
Uninstalled the HP printer driver, restarted the computer, downloaded HP's latest driver for this computer from their website under the instruction of HP's tech support person and reinstalled this driver and again performing all of the above.
Repaired disk permissions several times.
Reset the printing system under the Printer and Fax area of System Preferences.
I have been unable to find any further possible fixes in any of the discussion boards either on the Apple or the HP site. After doing everything listed here the HP tech support person felt that the problem must be with Apple rather than HP since the problem developed initially after the Epson printer update and then occurred with both the Epson and the HP printers.
I have an appointment later today with an Apple Genius at my local Apple store to see if I can get any advice. Any suggestions from anyone on this board would be greatly appreciated since I do need my printer to carry on in my business. At this point I am desperate to the point of considering the replacement of my computer but am hesitant to do so suspecting that the new models should be released soon.

HI and Welcome to Apple Discussions...
Try downloading and installing the 10.6.1 combo update. It's OK to do this even though you are already running 10.6.1. One of the "fixes" .. "some printer compatibility drivers not appearing properly in the add printer browser"
http://support.apple.com/kb/DL930
Make sure and repair disk permissions after the installation.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Always make sure your Mac has sufficient disk space available.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. *Make sure you always have a minimum of 10% to 15% free disk space at all times.*
Carolyn

Offline Navigation not working

If my Nokia N9 is offline due to lack of coverage or in flight mode, the Drive nor the Maps Application can't find a route to a selected place. I have downloaded the maps, I even can find the address on the maps. But when I try to let N9 navigate to this location, it shows a message, with tells me, the device isn't able to route a way while it's offline.
If I haven't any network or the device is in flight mode, I can't use the N9 for navigation. Moreover, when I'm abroad I have to pay hefty roaming fees.
My previous devices with Symbian (E71, E72, E6-00 and E7-00) where able to route its way without any network traffic!
Can anyone confirm this behavior and is there a solution to this or will this problem be addressed in an update (PR1.1, etc.)?
Greetings
Rog007

@Rog007
if you go to "Settings" > Device > GPS & positioning - do you have the same settings as screenshot?
Happy to have helped forum with a Support Ratio = 42.5

What is the event by which i can get that user deny the offline data store when the message comes in the browser

I have an application which stores manifest for offline use. Now firefox asking for a confirm message that if i want to allow or not. If i say 'allow' the application works fine. but if i say 'not now' or 'never for this site' the application stops. What is the event to check that user deny to allowing store data. i used different option like - cached,noupdate,error,uncached,idle,obsolete. as an example- applicationCache.addEventListener('idle', function () {});
but none of this says that user deny to allow. Please tell me the option that i can check that user does not want to allow and do my rest work.

It should be possible to allow offline data storage for only certain websites, and that setting is in Options > Advanced > Network. If the answer is "don't do it", then it should not be done. Is that not what is happening?

Lync 2013 On Prem - Front End Pool - Second server in pool becomes unavailable when first server is offline

We have one front end pool, that contains 2 front end servers running Lync Server 2013.
When the first server, LFE01 goes offline (to be restarted for instance), the second front end server LFE02 in the same pool's Lync services will suddenly stop and will refuse to start until LFE01's Lync services have started again.
During this time, the Lync client will go from full functioning mode whilst LFE01 is up and running, to reduced functionality (when LFE01 is restarting), to the user being signed out of Lync and not able to log back in. As soon as LFE01 comes back up, users
can log back in to Lync.
We'd ideally like LFE02 to take over the front end server role whilst LFE01 is restarting, and vice-versa.
Checking the event logs on LFE02, I can see the following errors when LFE01 is offline:
This process was not able to update its health status
The Audio-Video Conferencing Server failed to send health notifications to the MCU factory at https://frontendpool.contoso.com:444/liveserver/mcufactory/.
Failure occurrences: 30, since 7/11/2013 3:40:38 PM.
Cause: Either the Front End service is not running, or poor network connectivity.
Resolution:
Verify that the Front End Service is available, and its machine is visible over the network.
This process was not able to update its health status
The IM Conferencing Server failed to send health notifications to the MCU factory at https://frontendpool.contoso.com:444/liveserver/mcufactory/.
Failure occurrences: 30, since 7/11/2013 3:40:42 PM.
Cause: Either the Front End service is not running, or poor network connectivity.
Resolution:
Verify that the Front End Service is available, and its machine is visible over the network.
Server startup is being delayed because fabric pool manager is initializing.
Cause: This is normal when Pool is bootstrapped and indicates that the Front-End is waiting for a quorum of other Front-Ends to be started.
Resolution:
If this event recurs persistently, ensure that 85% of the Front-Ends configured for this Pool are up and running. For 2 or 3 machine Pools, initial cold-start of the Pool requires all machines to be started. If multiple Front-Ends have been recently
decommissioned, run Reset-CsPoolRegistrarState -ResetType QuorumLossRecovery to enable the Pool to recover from Quorum Loss and make progress.
Does the first server in the pool need to be up at all times for the second server to be running? If so, I may need to re-plan my redundancy.

I can't believe how inaccurate these statements are.
Yes as per Microsoft it is best practice to have 3 FE in a pool but that absolutely does not mean that if you have 2 FE server in a pool that your pool will stop working!!
In case when you do have 2 FE servers in a pool your Back End primary database server will act as a vote to keep the quorum for single server still left in a pool and all your clients will keep operating in a pool with one FE still running.
The problem with having 2 FE in a pool as per Microsoft documentation is as follows:
If one of the two Front End Servers goes down, you should try to bring the failed server back up as soon as you can. Similarly, if you need to upgrade one of the two servers, bring it back
online as soon as the upgrade is finished.
If for some reason you need to bring both servers down at the same time, do the following when the downtime for the pool is finished:
The best practice is to restart both Front End Servers at the same time.
If the two servers cannot be restarted at the same time, you should bring them back up in the reverse order of the order they went down.
If you cannot bring them back up in that order, then use the following cmdlet before bringing the pool back up:.
http://technet.microsoft.com/en-us/library/gg412996.aspx
I tested this in my environment which I currently am running with 2 FE servers and I can categorically confirm that pool will continue operating.
However, with all this said I did notice that clients with connection to FE server that is shut down take anywhere from 2-9 min to reconnect. I was trying to figure out why such a long delay until clients reconnect. Possibly it might be because there are
2 FE servers in a pool and Back End server is taking a while to vote in turn delaying auto reconnect process for clients. Second possibility that I'm looking into is that we deployed HLB for sip traffic internally as well and I'm curious if using DNS LB would
fix this delay.
I'm just so disappointed how inaccurate some of these accepted answers above are.

Offline install of Windows 7 SP1 not recognised by Windows Update

Hi
I have asked this question over at the Windows Community forum, and someone suggested that I ask here.
This question regards Windows 7 and Service pack 1
I bought a couple of new computers, and decided to use the offline SP1 installation on each to get the computers up to date when I first configured them.
So I downloaded the offline update iso from Microsoft, created a DVD and installed SP1.
After configuring my computer, I then connected windows update to get all fixes etc since SP1.
To my dismay windows update has presented me with a list of *all* updates, including SP1.
Is there any way of getting Windows update to recognise the fact that I already have SP1 installed?
Further info:
This is the procedure I went through.
1) Built the computers
2) Installed Windows 7
3) Installed hardware device drivers
4) Installed SP1 from DVD
5) Connected to the internet
6) Activated Windows
7) Used Windows Update
8) Installed the fix/patch required for windows update to work
9) re-connected to windows update
10) Was dismayed at the list of fixes requiring download. (around 148)
After going through the process of downloading the updates, at around the time of the second re-boot, the list of updates included Service Pack 1.
AV Software was going to be the next thing to install, after the computer was *fully* patched
Further Further informatio :)
I have since gone ahead and installed Windows on my second computer.
I'm still interested in finding a solution for future reference.
After installing Windows7 and applying the offline SP1 update, I checked to see what updates were installed before
activation and connecting to windows update.
These are the updates listed.
1) Service Pack 1 for Windows 7 (KB976902)
2) Update for MS Windows (KB976902)
3) User Mode Driver framework V1.11 (KB2685813)
4) KB958488 (the list just haqd the kb number, no title)
5) Hot Fix for Windows (KB2505454)
My original question, and the answers/feedback can be viewed at the following page:
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/offline-install-of-windows-7-sp1-not-recognised-by/e8ab61d0-8669-4297-acfd-4acc0da8c1dc?rtAction=1427893878897
Cheers...
Daz

Hi Daz,
You mentioned that the SP1 prompted again in the needed updates, I suspect that that is not the full service pack, it is only some changes to existing non-security content, appropriate 10 MB size. you can check the size of the update to confirm
this.
See more information in this link
http://support.microsoft.com/en-us/kb/894199
And after you have manually installed the updates offline, have you checked whether these updates are listed in the "installed updates", or in Update history? And you can check the new detected updates, whether they have been successfully installed
in your system. Meanwhile, when you check for updates online, please check your Windows Update settings, we recommend you to check for important updates, not optional updates or hotfix. You can install the optional update or hotfix when you need it in the
future.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I can't connect I get a prompt. Offline Mode. Firefox is currently in ofline mode and cannot search the web. Uncheck the "work offline" menu, then try again. How do I change the option?

'''can't connect'''I can't connect to the internet via Firefox. For some reason I continually get the message indicated above which reads: Uncheck the "work offline" menu item, then try again.
Please advise A/SA/P
Michael
310.993.7895

Did you try File > Work Offline?
Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
Create a new Boolean pref with the name network.manage-offline-status and set the value to false.
Right-click on the about:config page to open the right-click context menu and use "New > Boolean" to create a new Boolean pref.
Name: network.manage-offline-status
Value: false
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
You can use the Filter bar at to top of the about:config page to locate a pref more easily.
* http://kb.mozillazine.org/about:config

Please help, I reset my Apple Id and my iMessage is working properly on my iPhone but now all of the conversations on my Macbook say "offline"

Please help, I reset my Apple Id and my iMessage is working properly on my iPhone but now all of the conversations on my Macbook say "offline"

Hello sydney235,
You may need to update your MacBook Air with your new Apple ID password.
OS X Mountain Lion and later: Open the Messages app, select Messages > Preferences, then click the Accounts icon.
If you signed out before changing your Apple ID password, click Accounts and enter your current Apple ID to sign in.
If you're still signed in with your previous Apple ID password, click Accounts, then select your previous Apple ID from the list of accounts. Click Sign Out, then click Sign Out again when asked to confirm. Enter your current Apple ID to sign in.
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Cheers,
Allen

Offline Confirmation

Similar Messages

Maybe you are looking for