Often lose wireless connection when using HDTV as monitor

I have an unusual wireless networking problem when using my Samsung HDTV in my living room as a monitor for my MacBook (when watching Internet TV shows, for example). Frequently when I switch URLs, networking freezes, even though the connection appears strong, with the Airport symbol at the top of my screen showing all bars. To re-establish the wireless connection, I have to go through the process of re-joining my network through the “Join Other Network" option. The signal holds as long as I don’t try to change it, as in selecting another URL.
I connect to my HDTV via HDMI cable, using a mini-DVI to HDMI adapter from my Macbook’s video-out port. The audio connection is a mini-plug from the Mac’s headphone out jack to stereo RCA plugs associated with the TV’s HDMI port.
The wireless connection is through a Lynksys Wireless-G 2.4 Ghz, 54 Mpbs Broadband router.
I’d appreciate any solutions the Apple user community has to offer.

I'd say this has nothing to do with your display. The problem will likely lie in either your router settings, network settings or a simple signal strength issue. Try first changing the broadcast channel on your router, and make sure all settings are correct for your desired network.

Similar Messages

I often lose my connection when playing bridge on Bridge Base on Line

I often lose my connection when playing bridge on Bridge Base on Line
== URL of affected sites ==
http://www.bridgebase.com

Howdy Old rider,
Thanks for using the Apple Support Communities.
If multiple iPhones are having the same issue where ithey are disconnecting from your Wi-Fi network, then I'd like you to please review the settings on your router to ensure they match with the information in the article below.
iOS and OS X: Recommended settings for Wi-Fi routers and access points - Apple Support
Take care,
Alex H.

New 6500 E709n loses wireless connection when it or laptop sleeps... & other problems!

Just got this printer and am hoping we can get it to work because we really like it. I believe we've done everything right - it is connected to PC via USB, and to laptop via wireless network. Both computers are Dells running XP. Our wireless router is a Linksys Wireless-G WRT54G. We installed the disk on both. Immediately after installing on the laptop by plugging in USB and then unplugging, we were able to get it to work. We printed and scanned from both . . . UNTIL the printer went into power save mode.
When it sleeps it loses all the network connections (but will still print from PC). Even the icons disappear from the laptop after it sleeps. The only way to get it to work with the laptop again is to start all over, plug in the laptop, enter the WPA key again, and so on. Then it's finebut for just a short while. Now, when I registered my protection plan, I was on the phone with a techie guy and asked him if it's normal to have to keep entering the key every time you want to print, and he actually said that maybe I shouldn't let the printer sleep - wow! I want to conserve energy, so I may even want to shut it off, okay, and I don't feel I should have to go through this rigamarole every time I want the darn thing to just be available to the network. Furthermore, what's the sense of having to turn "Wireless Radio" on and off all the time???
Anyway, there are other problems and the menus in the internal web browser is about as confusing as it can be. Is the passphrase the same as a WPA key? There's a passphrase in there which I did not enter, and I don't know what it is because it's been disguised with dots. When I enter the WPA key on the front panel of the printer, it doesn't stick. One thing I noticed in the instructions is to keep telephones away from it, so I moved ours (was right next to it) but it's still being ornery.
In addition, the scan function only works from the software, not as a standalone if I use the front panel. When using the button on the front panel, sometimes it sees the laptop, sometimes it doesn't, and then it starts to scan, but a menu pops up on the computer asking to update the buttons, and then nothing happens.
Have we a clunker on our hands that should be returned, or is there a remedy? All suggestions welcome!
Message Edited by geoxena on 10-20-2009 10:56 PM
Message Edited by geoxena on 10-20-2009 11:03 PM

Let me answer the easy stuff first:
Yes, the passphrase is the same as the WPA-PSK key.
No, it's not normal to have to re-enter the wireless security key over and over again. Politely tell our service agent that he is mistaken on this point.
There's no sense in having to turn the radio on and off all the time to get the printer to remain on the network.
When the printer goes into power-save mode, can you still access the printer's internal web page by browsing to it's IP address? When the printer loses wireless connectivity, can you wake the printer by pressing any of the buttons on the front panel?
I have a couple more questions:
What WRT54G HW version do you have (it'll be on the bottom label of the router)?
What version of FW does your router have? You'll have to browse to the router's internal web page to find out.
Finally, change the WPA-PSK group key renewal period to the largest value possible. Tell if this affects the frequency of printer losing Wi-Fi connectivity?
One more question. After you have the printer connected to your wireless network and it's working, if you turn the printer off (via the power button), wait five seconds then unplug it then plug it back in and turn it on, does it connect to your network?
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

MacBook loses wireless connection when iPod touch connects to network

hi
ever since upgrading to 10.5.5. on my MacBook i've had the "intermittent network connection" problems that have been described and discussed (without any real solution from what i can see) in another thread.
PROBLEM: every couple of minutes my MacBook loses connectivity to the network - the AirPort icon still says that i'm connected, albeit with one less bar than before, but i can't connect to anywhere, not even to the wireless router - and to re-establish a connection i need to switch off AirPort, switch it back on, it will then reconnect, and after two minutes or so i have to do it all over again because the network connection drops again.
NOVEL OBSERVATION 1: reinstalling the 10.5.5. combo system updater helped somewhat. i used to get an error in system.log about there being too many state transitions on the wireless network and about network traffic reduction measures being taken to overcome this problem, but after reinstalling the 10.5.5. combo system updater this message never appears in the logs and I get kicked off only sometimes (see what i say in point 2 below)
NOVEL OBSERVATION 2: now my MacBook will only lose its connection to the net if i switch on my iPod Touch and switch its wireless interface on. in fact, the only way to avoid the MacBook getting constantly disconnected is to make sure that the wireless interface on the Touch is switched off in the Touch's system preferences; if I just sleep the Touch (top button) without switching off its wireless network interface first in its System Preferences, then the MacBook will keep disconnecting even while the Touch is in sleep mode (presumably the Touch keeps polling the network or something, even while it's in sleep mode).
DIAGNOSTIC NOTE 1: I have another wireless device (my Nokia E51, which has wifi capabilities) and if I connect it to the wireless interface then the MacBook's connection isn't dropped - i.e. the MacBook only loses its wireless connection when my iPod Touch connects to the wireless network.
DIAGNOSTIC NOTE 2: I have upgraded my wireless router (before I had a Linksys WRT-54GC, now I have a Netgear WGR614v9) but that has made no difference.
DIAGNOSTIC NOTE 3: I have also tried altering the router's settings (i have played around a_lot with this, trying every combination I could think of - e.g. staple down particular devices to particular ip addresses, use only 802.11g versus automatic b/g, etc) but that has made no difference either.
RANT:
The only thing that prevents these disconnections from occurring is to keep the iPod Touch's wireless switched off, which ***** because if I'm in the kitchen I can't have it switched on to monitor my email (yes, I've no life, i hang around waiting for emails), or if I go have a lie down and want to check out stuff on the net, or to browse the iTunes music store or whatever, then I know that my connecting my iPod Touch the computer will be disconnected.
This obviously *****, right? And a lot of people are having wireless problems with their MacBooks, right? And these problems seem to have been around for over a year, right?
So why hasn't Apple solved this problem yet? Or am I just being melodramatic?
Your thoughts on any or all of the above, or flames if that's your preferred method of communicating, are invited. =)
Cheers
dr.colekat

Having the same problem here. As a first time mac user, Apple has certainly made a bad first impression.
For me, the issue seems to occur when transferring files between computers that are connected to the same access point (when transferring files from wired computers on the network there is no issue). My vista laptop and every laptop I have tried has worked perfectly fine with this access point so I am 100% convinced it is the mac. Basically when I copy the files, after about 100mb, I am unable to access anything on the local network or internet until I restart Airport. The weird thing is that even though I am unable to access anything, the airport utility says it is connected. I might also note that the wireless signal strength is full.
If I can't get this figured out in a few days, this computer is going back to the store where it came from and I will officially label myself anti-mac. This type of issue is just unacceptable for something so main stream.

Printer loses wireless connection when it goes to sleep?

My printer loses wireless connection to my router when it goes to sleep and I have to input the WEP key again. As long as the printer is awake it works fine. The wireless light remains on.
Printer is HP Officejet Pro 8500A Plus and the router is a Verizon 7500.

If you mean WPA, that is good.
Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I lose wireless connectivity when I connect the nano to my PC

I have a DSL modem connected by ethernet cable to a Linksys wireless router. My PC has USB linksys antenna. The wireless connection works fine except when I plug in the Nano, it takes about two seconds and I lose the connection to the router. If we are in itunes downloading it is suspended. If we are on the internet the next click and the Microsoft "you are not connected to the internet" page comes up. To reestablish the internet connection I have to remove the nano and reboot the PC. Needless to say this is very frustrating.
If I reboot with the cable attached I get an error unable to run an ____.exe that I believe is the antenna setup because the linksys monitor stays gray in the startup box.
I have tried to move the antenna to a different USB port on the PC with no luck. Everything else runs fine.
Does anyone out there have any ideas/fixes? - Your assistance is greatly appreciated!

thanks deggie for your answer.
I had my ipod with autosync off ... I set it "manage like disk" .
I try to recover the music with 2 programs: "ephod" and "copy trans" ..
I can see all the songs listed, but can´t backup to disk or recover them......
I see than my ipod hasn´t the folder "ipod_control" , which appears before I had this problem....
Any idea ??? Thanks again.

Lose wireless connection when not in same room as wireless modem.

When I try to use my z60t laptop in another room in the house I cannot connect to the internet. The signal strength is either very good or low. When I am in the office where the wireless modem is located, my signal strength is excellent and there is no problem. My husband does not have this same problem with his HP laptop. I also get a good signal with my iphone all over the house. After calling Verizon it was determined that it is a computer problem.
Any suggestions?
Thanks,
Lisa

100% certain that I am connecting to my modem. And yes the password is a good one too. As I said, I have no troubles connecting when outside a 5metre or 15feet (for those of us who aren't metric) radius of the modem. When closer then that, the connection will usually drop out.

Wrt54gs loses internet connection when using P2P Ares

I have a wrt54gs v5 and I've installed the latest firmware and reset back to factory then reconfigured. Whenever Ares is started all other computers (wired or wireless) lose their inet connection. Within 2-5 minutes of stopping Ares everything starts working again. I've checked Ares and it's set to am max of 10 connections.
I've hooked up my old befsx41 and it works fine but I need the wireless. Both of these are talking to a befcmu10 cable modem. I've never had problems with linksys before but from what I'm seeing on the forums the wrt54xxx doesn't seem to be of the same quality as the oldser stuff. Anyone know of any specific versions that fix this?
(Mod Note: Edited for guideline compliance. Thanks!)
Message Edited by Maximus on 07-04-2007 02:13 PM

Since your BEF works with P2P, why don't you simply convert your WRT into a WAP (wireless access point). This way you will use the wireless of the WRT, while using the BEF to handle all the routing chores.
To do this, setup the BEF as your primary router.
Then wire one computer to port 1 (not the Internet port) on the WRT. (Note: Disconnect everything else from the WRT at this time.)
Then in the WRT do the following:
Turn off the DHCP server.
Set the "Local IP address" to 192.168.1.2 (assuming no other device on your network is using this fixed LAN IP address, and assuming the BEF is set to use the 192.168.1.x address space.)
Save your settings. Power down the WRT.
Next, connect any numbered port on the WRT to any numbered port on the BEF. Do not connect anything to the Internet port on the WRT.
The BEF will control your router settings (DHCP server, port forwarding, etc.)
The WRT will control your wireless settings.
Please let me know whether this setup allows your P2P to work properly.

WRT610N (no wireless connection when using security key)

My router hooked up hard wired fine. my wireless does not work when I set a security key of any type. It all seems to work fine with the system unlocked and no security set at all. I do have networkmagic 4.9 on my machines and have had for several years. My old wrt54G seem to work fine with a security key. It just got to where I had to reset the router a lot after a couple of years. How do I get this WRT610N ver:2 to work with a security key? I use Windows XP on all 3 computers,,,, 1 hard wired 2 wireless. I have had a WRT54G for a few years ,,,so I know how this stuff works,,,but I can't figure this one out. help please I want it to work right. Thanks,,,,I have a brand new WRT610N Ver:2

First of all, in the WRT610N, give your network a new unique SSID. Do not use "linksys". Do not use your old SSID. If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Next, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Delete any network with your old SSID. Also delete any network that you do not recognize, or that you no longer use. Enter your new network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings". Reboot computer. Your computer should connect automatically to the router (it can take up to two minutes). If you still have problems, temporarily turn off your compute software firewall, and try again to connect.
If the above does not fix your problem, download and install the latest driver for your wireless adapter.
Some users have reported improved wireless performance by switching to WPA encryption.
Note:
For WEP, enter WEP "key 1" (found in the router) into your computer, not the WEP password or passphrase.
For WPA or WPA2, enter the key (sometimes called password or passphrase) into your computer.
Win XP requires a patch to run WPA2 (= WPA with AES) . The patch is in SP3, so you will need SP3 to run WPA2.
Message Edited by toomanydonuts on 01-02-2010 12:14 AM

Mac mini loses wifi connection when using vnc....

I currently dont have an aextra keyboard, mouse and monitor so for short term id like to connect remotely to it. I configured the sharing settings in system preferences on my mac. Im running Mac OS X Lion 10.7 and Im using tightvnc on my windows computer and its having a hard time getting connected to the mac mini. I notice when I try to connect my wifi connection on the mini drops. Can anyone tell me why this is? Any help would be greatly appreciated.
Thanks
Angelo

We'd need a Monitor & KB/Mouse on the Mini, or another Mac to log into it, but you might try navigation to...
/private/var/log folder on the Mac & maybe look at the system.log if you can on a PC.

AirPort Express wireless connection, when I surf the news sites so I linked to **** pages. And must close the window. If I use my iPhone with Internet sharing the same computer, then I have no problem. I believe that it is in AirPort Express, and wou

AirPort Express wireless connection, when I surf the news sites so I linked to **** pages. And must close the window. If I use my iPhone with Internet sharing the same computer, then I have no problem.
I believe that it is in AirPort Express, and would have to clean it. How do you do that?

You need to use the Express in router mode.. I think you are trying to use it in bridge mode.. but you need to give us a lot more details.. screenshots might help more than anything.

7510e printer loses internet connectivity when it goes to sleep

I own a 7510e all in one printer, I connected it wireless again after having it connected with a USB
cable, I had to do this because my printer loses internet connectivity when it goes to sleep or if I get a power outage, this has been going on since I purchased it last year. I got a new wireless router/modem combo from my ISP server and hoped that would solve the problem but it has not.
I cannot get any apps except for those that are on the front of my printer which are just for small kids. I am now told that this printer has been discontinued and 7520 has replaced it, I do not wish to spend another $200.00 in less than a year for a printer. It is registered with HP connected and I have a Efax # and HP connected address, I did everything correctly but it seems that each time I set it up wireless it messes up my desktop windows 7 home premium 64 bit, cloud services told me not to use IE 10 but we are ready to download IE11 so I am using IE 10, this time HP support assistant quit working and I could not even uninstall it until I downloaded microsoft fix it and then redownloaded it from HP web site.
If anyone has any ideas I would appreciate it, I am not on a home group yet it always tells me I do not have administrators permission to do a lot of things, I am the only user.

Hi emma22
Here is a document for Getting the Latest Firmware and Product Updates.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02979046&cc=us&dlc=en&lc=en&os=4063&product=507...
I checked and there is no way to turn off the sleep mode on this model.
I included a document for Printer Does Not Maintain Wireless Connection and to try Solution three: Assign a static IP address to the printer. You will need to get your It department most likely to set this up for you if you don't have full admin rights.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03678348&tmp_task=solveCategory&cc=us&dlc=en&la...
Hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

OJ 8600 Constantly loses wireless connection

My OfficeJet Pro8600 Plus works great, except when it loses wireless connection. I have an ATT wireless router/modem. Frequently, when the printer goes to sleep, it will not print. The wireless icon on the printer shows good, and says connected. But then I get the message on my computer that the printer is not connected. I cancel the print, restart the printer and then it will work. I also frequently get the message that scanning is also not connected.
Once I reboot the printer, it works fine. Any ideas?

brown7373,
If you have not done so for a while, I might suggest that you install (reinstall) the Full Feature Software for your printer. In August of this year (2014) there was an Update to the software that may well help with the situation you are facing.
Less clear, due to the usual less than full descriptive qualities of the documentation supplied with these things (in my opinion), is the need for the accompanying firmware Update that is shown for at least those users running the Windows 8.1 Operating System. Firmware updates, might be installed after software updates are tried -- and only at the user / owner's discretion.
General Instructions to Install the Printer Software
Reminder:
In most cases, the Solution Center has been replaced by the Printer Assistant.
The Printer Assistant shortcut will be installed on your Desktop during the last part of the installation.
Windows Operating System:
Create Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
Open HP Drivers & Downloads
Enter your Printer Model information
Select your Printer from the “Results” list
OR
Open HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g Drivers
Enter your Operating System in the Drop-down menu
Click NEXT and Scroll down
Look for category Driver - Product Installation Software
Select the Basic Driver, e-print, or Full Feature Software
Save the *.exe installation package(s) on your computer
The file(s) will likely save to the "Downloads “folder.
Be sure to look for Updates as needed for your installation. If available, you may download the Print and Scan Doctor and / or other programs from Category – Utilities.
If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select run as Administrator and install.
NOTES:
Look at the bottom half of the main webpage for your printer for helpful videos to assist with the installation of the printer software!
Scroll the video list back and forth until you find the video that most closely matches your situation.
If using a USB connection: Download and install the driver software before connecting a USB cable.
Ethernet: Connect the printer to the network and (Optional) assign the printer an IP address at the router. Once the printer is connected to the network, be sure the printer is switched on and then install the printer software.
After the initial installation is complete and working, check / install Category - Update
There is valuable information at the support website, including sections for Manuals, Troubleshooting > How-to, Troubleshooting > Solve a Problem, plus alerts and notifications for your printer. Be sure to take an extended look at what is available. Bookmark the page.
============================================================================
If you are running the computer wirelessly and using a notebook, you might consider the following:
Set the wireless adapter to "all on" as suggested in the following Dragon Document:
Settings to Improve Wireless Connectivity
See the Section on Page One titled
Wifi Power Management
============================================================================
What If: Bummer - Nothing works. Sad Story and all that.
If all else fails, you can call HP and politely ask for the printer code to switch off the sleep timeout on your printer model. This works when everything else fails. It is not a solution; this is a workaround and maybe not a pretty one -- there may be consequences down the road. Switching off the sleep timer will keep the printer awake and available.
Disclaimer:
There is no guarantee that HP will give you the code. This is not part of the service. You can ask the question.
Reference:
PhotoSmart 7520 Printer Loses Wireless Connection – Set System Mode Timeout to Zero
Contact HP – USA - Phone Assistance
HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

I lose the connection when closing the CMD

Hi guys,
I have configured a standalone listener as following:
C:\Program Files (x86)\Java\jre6\bin> java -Dapex.home=D:\list -Dapex.images=C:\images -jar D:\apex.war
Afterward,
If I close the CMD, I will lose the connection, and I have to reconfigure it again.
If I open APEX locally , I mean by using the shortcut "Get Started With Oracle Database 11g Express Edition" , Then I will lose the connection that uses the default port of the listener, that is 8080.
After I configured the listener I got this message on the CMD
-- listing properties --
PropertyCheckInterval=60
ValidateConnection=true
MinLimit=1
MaxLimit=10
InitialLimit=3
AbandonedConnectionTimeout=900
MaxStatementsLimit=10
InactivityTimeout=1800
MaxConnectionReuseCount=1000
APEX Listener version : 1.1.2.131.15.23
APEX Listener server info: Grizzly/1.9.18-o
May 21, 2011 5:14:41 PM com.sun.grizzly.Controller logVersion
INFO: Starting Grizzly Framework 1.9.18-o - Sat May 21 17:14:41 GST 2011
INFO: http://localhost:8080/apex started.
Using JDBC driver: Oracle JDBC driver version: 11.2.0.2.0
Regards,

Hi,
I'm not sure I got your question right, but I'll try to find some solution anyway.
If I close the CMD, I will lose the connection, and I have to reconfigure it again.That's what happens when a shell is terminated - all associated processes will stop as well. However, if you have a apex-config.xml in your apex.home you shouldn't need to configure your APEX Listener each time your start it, but it would reuse an existing configuration.
If I open APEX locally , I mean by using the shortcut "Get Started With Oracle Database 11g Express Edition" , Then I will lose the connection that uses the default port of the listener, that is 8080.Now, if you have XE running on the same (local) machine as you have your APEX Listener running in standalone mode, you probably have a port conflict: By default, both APEX Listener in standalone mode and the Embedded PL/SQL Gateway (EPG) use port 8080. The EPG is activated as web server for APEX in XE after a fresh installation, the APEX Listener would be an alternative in that case. You can either stop the EPG, or reconfigure any of the two web servers to use a different port, if you want to run them parallel.
To change the port used by the APEX Listener in standalone mode, you simply add another parameter to the startup: -Dapex.port=8888 and you're done.
To change the port used by the EPG, connect as sys and run the following
EXEC DBMS_XDB.SETHTTPPORT(8888);
COMMIT;If you want to disable the EPG, simply set the port to *0* .
After I configured the listener I got this message on the CMDThat's what it should look like.
No, since your topic is "lose the connection when closing the CMD", I assume you search for an alternative. You could run the APEX Listener as a Windows service, even in standalone mode. To do this, you create a batch file, e.g.
%JAVA_HOME%\java -Dapex.home=D:\oracle\APEX_Listener\_home -Dapex.images=D:\oracle\apex_4_0_2\images -Dapex.port=8888 -jar D:\oracle\APEX_Listener\apex_listener.1.1.2.131.15.23\apex.war >>D:\oracle\APEX_Listener\apex_listener.1.1.2.131.15.23\my_apex_listener.log 2>&1Note that you have to set JAVA_HOME as system property or replace the call with the absolute path to your JDK or make sure the JDK is in your PATH variable.
Of course, you can and should change the other directories as well to fit to your system.
Next, create a Windows service, e.g. using [url https://iain.cx/src/nssm/]NSSM (free) or [url http://support.microsoft.com/kb/137890]SRVANY (MS, non-free), that starts your batch as a windows service.
The command for creating that service using NSSM could look as follows
nssm install APEX_Listener D:\oracle\APEX_Listener\apex_listener.1.1.2.131.15.23\startup.cmdYou can edit the service properties afterwards, e.g. change the start mode from "Automatic" to "On Demand".
I hope this answers your question. If not, please point me into the right direction.
Thanks,
Udo

OS 10.4.6. has broken dialup connectivity when using fast user switching

I installed OS 10.4.6. It seems to have broken dialup connectivity when using fast user switching when switching from one user to the next.
For dialup, it is extreamly annoying that I can not resume downloading a file from were it got cut off, but now, if another user wants to check their email, my download always gets broken and has to be restarted. Dialup is slow enough with out having to start from scratch even more frequently, now.
Also, in earlier versions of 10.2 or 10.3 (I don't remember which), I was able to switch users and maintain listening to a single users' iTunes.
I would like to be able to switch users and not lose either my dialup network connection or the primary users currently playing iTunes songs.
Perhaps for iTunes, one should be able to chose to mute another users' instance of iTunes, if it is currently playing.
Mini-Mac 1.42GHz 80GB BT/AE Mac OS X (10.4.6)

I have not tried replicating this but might be able to provide some additional information.
We use network login accounts on our desktop computers. Fast User switching deliberately will not work for multiple network login accounts. (Remember network login accounts normally also have an associated network home directory mounted via AFP.)
Now a bit of background about volumes and mount points under Mac OS X. Under Mac OS X, any additional drive (or more accurately 'volume') is listed under the 'Volumes' folder, remember also that Mac OS X is a Unix operating system. So just as normal for Unix, the boot drive is '/' or the root level and Volumes is a folder in it. The underlying Mac OS X software automatically 'attaches' and additional volumes as sub-folders in the 'Volumes' folder (in Unix speak these are called 'Mount Points'), if you have an external hard-disc called 'Fred' then this would be represented by the following path
/Volumes/Fred
If you happen to have two volumes with the same name connected at the same time then while in the Finder they may show up with the same name, in Unix they would have different names automatically assigned to keep them separate like so
/Volumes/Fred
/Volumes/Fred 1
Now getting back to the Fast User switching problem and AFP volumes, when you login to a File Server volume it also is automatically added to the Volumes folder, so if we have a File Server volume called 'Shared' it would look like
/Volumes/Shared
With Fast User switching potentially both user accounts could be accessing the same /Volumes/Shared which means both user accounts would be talking to the server via the same File Server login, hence the possibility for one of the Fast User accounts to be using the 'wrong' permissions.

Often lose wireless connection when using HDTV as monitor

Similar Messages

Maybe you are looking for