OID Newbie - Select all OID users

I want to know if I can run a SQL command to select all the users from OID. I want to do this because I need to create a script to assist me in RAD creations for all the users.
Anyone have any help for a newbie like me???

I don't think you can do it in SQL - what you need is an LDAPSEARCH command - I can possibly help with that if you think it might help.
Remember OID is an LDAP !

Similar Messages

How to list all OID Users

Hello,
I have Oracle OID synchronized with my LDAP directory, i need a pl/sql statement that returns all the users in LDAP directory.
Any Ideas ?
Regards,
Hussam

Hi Paul
Well although writing a simple Portal Application is quite a straight forward method of approaching it, but I think you could also retrieve the mapping data using a AppIntegtrator iView.
Please have a look at this thread , where there is a link to Will Carltons paper, which explains on how to do that.
How to access user id and password via UserMapping ?
Give it a shot!
Cheers.
Award points for helpful answers.

How create LOV(select List) with all LDAP users

Hello,
I am trying to create a selected list with all the users in my LDAP, note my LDAP is synchronized with my OID.
Any suggestions, I'm searching the the pl/sql statment?
Thanks
Hussam

Hi Hussam,
Take a look at my comments in the following two threads -
Re: LDAP
Re: Cookie And LDAP
The two different threads discuss the methods I use to do what you want to do (so you really need to 'combine' the two different threads).
Hope this helps

OID filter to restrict ocs user in calendar, files, mail

We are trying to setup some filter in OID in order to restrict some search screen and list of value in calendar, mail and files so that our users doesn't see the users under another subtree of OID.
We have the following in OID:
orcldefaultsubscriber: dc=sric,dc=ca
orclcommonusersearchbase: cn=users, dc=sric,dc=ca
Under this Common User Searchbase we have about 50 different organization under which the end user of our services are located.
We want to restrict the users of one organization to his particular organization. So that he cannot see the users of the others organizations.
For example, in mail, when the user open a new mail and use the address book.
The user shouldn't see all the user of dc=sric,dc=ca but instead be limited to the user under cn=his organization,cn=Users,dc=sric,dc=ca.
We currently have OID filter in place to restrict the user of Portal.
These filter are working fine. Trying to duplicate this functionality for calendar, mail and files.
Any hints ?

many thanks for your answer.
if i can't filter corporate directory. can i disable this function from oracle web client?
can i hide an user from corporate directory?
many thanks
best regards
giorgio

How to write select query for all the user tables in database

Can any one tell me how to select the columns from all the user tables in a database
Here I had 3columns as input...
1.phone no
2.memberid
3.sub no.
I have to select call time,record,agn from all the tables in a database...all database tables have the same column names but some may have additional columns..
Eg: select call time, record,agn from ah_t_table where phone no= 6186759765,memberid=j34563298
Query has to execute not only for this table but for all user tables in the database..all tables will start with ah_t
I am trying for this query since 30days...
Help me please....any kind of help is appreciated.....

Hi,
user13113704 wrote:
... i need to include the symbol (') for the numbers(values) to get selected..
eg: phone no= '6284056879'To include a single-quote in a string literal, use 2 or them in a row, as shown below.
Starting in Oracle 10, you can also use Q-notation:
http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/sql_elements003.htm#i42617
...and also can you tell me how to execute the output of this script. What front end are you using? If it's SQL*Plus, then you can SPOOL the query to a file, and then execute that file, like this:
-- Suppress SQL*Plus features that interfere with raw output
SET     FEEDBACK     OFF
SET     PAGESIZE     0
-- Run preliminary query to generate main query
SPOOL     c:\my_sql_dir\all_ah_t.sql
SELECT       'select call time, record, agn from '
||       owner
||       '.'
||       table_name
||       ' where phone_no = ''6186759765'' and memberid = j34563298'
||       CASE
           WHEN ROW_NUMBER () OVER ( ORDER BY owner          DESC
                          ,        table_name      DESC
                          ) = 1
           THEN ';'
           ELSE ' UNION ALL'
       END     AS txt
FROM       all_tables
WHERE       SUBSTR (table_name, 1, 4)     = 'AH_T'
ORDER BY owner
,       table_name
SPOOL     OFF
-- Restore SQL*Plus features that interfere with raw output (if desired)
SET     FEEDBACK     ON
SET     PAGESIZE     50
-- Run main query:
@c:\my_sql_dir\all_ah_t.sql
so that i form a temporary view for this script as a table(or store the result in a temp table) and my problem will be solved..Sorry, I don't understand. What is a "temporary view"?

Set all checkboxes of the selected column by user at run time

Hi ,
I have a table control tab_500 with the 3 columns of checkboxes. When user selects particular column, and click on the buttone 'Select All', all the checkboxes of that column should get selected.
loop at tab_500-cols into cols_500.
if cols_500-SELECTED = 'X'.
endif.
endloop.
How to do this.
Thanks in advance,
Regards,
Madhuri

Hi,
In PAI write this code..
DATA wa_table TYPE cxtab_column.
IF SY-UCOMM EQ 'SELALL'.
     LOOP AT <tablecontrol>-cols INTO wa_table.
        IF wa_table-screen-name CS <checkbox colume name in upper case>
           AND wa_table-selected = 'X'.
          itab-check1 = 'X'.      " Check box field set to X
          MODIFY itab TRANSPORTING check1 WHERE check1 = space . " modify the internal table
        ENDIF.
      ENDLOOP.
ENDIF.

Assigning View permission to all the users that have been selected in contact selector - SP 2010, InfoPath 2010

I have a SharePoint InfoPath 2010 browser form with item level security. Only submitter
and approvers has access to the form. This form contains a people picker that is populated with the names of attendees
for the meeting they attended (which
I am able to store in Field2 below). I want to allow attendees to be able to view (grant view permission) the InfoPath form. Field 2 has the users in form of domain\user1;domain\user2; etc. Following the below step, I am getting error when I ADD or REPLACE
permission on current item. How do I go about assigning view permission to all the users that have been selected in contact selector?
Jitu

Hi ,
i understand that the text box and the people picker hold multiple user names and you want to grant user permission based on the user in the text box.
I have a test based on your description,the results are: When there are multiple users in the text box, the workflow will throw an error'Error Occurred'.It is the same with the people picker column.
You need to limit the peopel picker to only allow to select one user,in this way the text box will only hold one user.Then you can use the people picker or the text box to grant user permission.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

How to select all files in "user dir" (LastAccessedDirectrory) using applet

Hi,
Can anyone tell me " How to select all files in "user dir" (Last Accessed Directrory) using applet"?
For this which method in applet used?
Thanks in Advance.

1) Do you want "user dir" (watever that is) or do you wnat the last accessed directory? Last accessed by what/whom?
2) Applets can't access the local file sytem, and for good reason, unless they're signed and the client has given permission.

How to block user create personal view and select ALL VIEW?

How to block user create personal view and select ALL VIEW?

Hello,
>create personal view
To restrict creating personal view, you need to modify your existing permission level or create new one. Login with admin account to your site and open role.aspx page (http://siteurl/_layouts/role.aspx). Then click on existing permission or add new permission
level-->and move to "Personal Permissions" section-->uncheck "Manage Personal Views - Create, change, and delete personal views of lists" option. Later you can assign this permission to all users, whom you don't want
to allow to create.
>and select ALL VIEW
Since SP does not supports view level permission directly so you have to use custom solution or use below designer solution to restrict user to open any view.
http://www.codeproject.com/Articles/433486/How-to-set-view-level-permissions-out-of-the-box-i
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

End User SPAM Quarantine checkbox to select all messages not working

We are running SPAM Quarantine on M670 running 8.1.0-476 and accessing with Internet Explorer 9.0. After logging into the SPAM Quarantine there is a top row check box that normally we can check to select all messages. This stopped working in IE for us, any idea what setting/option we could adjust to enable it again?
In Chrome 29, FireFox 23 it works as expected.
Jason

I think this is a know bug in 8.0, see below:
CSCuj42166
Selecting all messages in ISQ at once not possible with IE 8.0/7.0/6.0
Symptom:
When accessing the spam quarantine on ESA using IE 8.0/7.0/6.0 and trying to select all messages at once, an error occurs and no message is checked. At the bottom of the browser we see an "Error on page"
Conditions:
ESA running 8.0.0-671 and Internet Explorer 8.0 (same valid for 6.0 and 7.0)
Workaround:
Using a different browser to access the Centralized Spam Quarantine like for example Safari, Mozilla Firefox, Google Chrome, Internet Explorer 9
Further Problem Description:
Details
Known Affected Releases: (2)
8.0.0(Venetian)-671 | 8.5.0(FourQueens)-0
Known Fixed Releases: 0
Release Pending
Product: Cisco Email Security Appliance

Queuing/Retrying 'Rejected' status OID Process Tasks: OIM-OID provisioning

Hello Gurus,
I have already up and running environment with OIM, OID connector pack and OID as the target system. So when a user data (for e.g. a UDF) is being provisioned from OIM to OID target system; if a process task comes back with 'rejected' status due to target unavailability/OID down; then is there any settings that we can configure within OIM design console that queues up and retries these 'rejected' tasks related to each individual user?
Is there any setting within any of the OID lookups such that we can set a retry count for such process tasks?
The goal is without human intervention all these 'rejected' process tasks should run successfully and be set to 'completed' status. If the target system is unavailable then there should be a way to run all these failed tasks - is my assumption.
Is it by anyway related to 'Offline Provisioning'?
Please provide some guidelines.
Thanks,
- oidm.
Edited by: oidm on Mar 16, 2010 10:34 PM

But it'll only allow us to 'retry' those specific tasks for a limited number of times and limited period of time. And will this task be retried only if its 'rejected' or it'll be retried for whatever number of times we specified?
What if the target system doesn't come up for the whole day? Can we specify some value for the same in 'Duration' fields?
So all in all if we talk about retrying the failed/rejected tasks we just have these options in hand as far as task 'status' is concerned?
Thanks,
- oidm.

How to retrieve all the users along with their password from LDAP

Hello,
Can anyone let me know how to retrieve and list all the user along with their password from LDAP.
Thanks

Hi Prashant,
I have limited experience with Synchronization, but I agree with you - if you need to synchronize Passwords, you need to have the Password in clear Text.
If you trying to build your own Synchronization Solution using any of the avaliable LDAP APIs, I don't think you can ever retrieve a user's Password in clear text.
However, I did come across an interesting article & I hope you find it useful :-
http://www.oracle.com/technology/obe/obe_as_10g/im/configssl/configssl.htm
I am not sure if SSL is necessary - If you have a look at Metalink Note 277382.1 ( How to Configure OID External Authentication Plug-In for Authentication Via Microsoft Active Directory (MS AD) ), teh question asked by oidspadi.sh for the same is asnwered as "N".
Regards,
Sandeep

User management API/get all the users for a group

Hi all,
I'm trying to get all the users and their associated groups with the user management API. The method DirectoryManagerServiceClient.findGroupMembers(GroupMembershipSearchFilter)
returns all the users, great, but not the associated groups.
TO get the users i use the oid of a "super group" and this "super group" contains severals groups. It's the information about these groups i need.
I have read in the documentation of Principal Object that a search could omit
the group informations for efficiency. How can i bypass this limitation?
Thank you in advance for your help,
Philippe Vandenhove

Hi Philippe
Our CreateUser component will allow you to create local users and groups.
http://avoka.dnsalias.com/confluence/display/Public/Create+User+Create+Group
LookupGroup takes a group name or id, and returns a list of all members. I'm pretty sure it recursively evaluates contained groups, but you'll need to check. If it doesn't, log a bug to support-at-avoka.com.
http://avoka.dnsalias.com/confluence/display/Public/Lookup+DSC
Download at:
vhttp://www.avoka.com/apps/checkcookie?qpac=y&qpac_code=avokaESComponents&location=%2Fapps %2Fqpacdownload
Howard

SSRS 2012: How to get a "Select All" that returns NULL instead of an actual list of all values from a multi-select parameter?

I have a multi-select parameter that can have a list of thousands of entries. In general, the user will pick a few entries from the list or "Select All". If they check "Select All", I would much prefer that I get a NULL or an empty string
instead of a list of all values. Is there any way to do that?
In experimenting with a work-around, I tried putting an "All" label with a null value in the list, but it is ignored (does not display in the drop-down). If I use an empty string for the value, my "All" entry does get displayed, but so
does "Select All", which is confusing. Is there a way to suppress "Select All"?
- Mark

I adapted the following from a workaround posted by JNeo on 4/16/2010 at 11:14 AM at
http://connect.microsoft.com/SQLServer/feedback/details/249227/multi-value-select-all-parameter-in-reporting-services
To get a null value instead of the full list of all values when "Select All" is chosen:
1) Add a multi-value parameter "MyParam" that lists the values to choose.
2) Add a DataSet "ParamCount" identical to the one used by "MyParam", except that it returns a single column named [Count] that is a COUNT(*) of the same data
3) Add a parameter "MyParamCount", set it to hidden and internal, then set the default value to 'Get values from a query', choosing "ParamCount" for the Dataset and the one [Count] column for the Value field.
4) Change the parameter for the main report DataSet so that instead of using [@MyParam], it uses this expression:
=IIF(Parameters!MyParam.Count =
Parameters!ParamCount.Value, Nothing, Join(Parameters!MyParam.Value, ","))

Select All in large table

My product has some very large tables (using RANGE_PAGING). I want to allow the end user to do a Select All operation, and then press a command button to act on all selected rows, but want my backing code to detect a Select All has been done, rather than attempt to retrieve all rows from the table. Is this doable with a RichTable?
I'm porting an existing UI over to ADF -- the old UI handled this by having a separate select all button (column header), which would get unset if any row got unselected, and the backing code could interrogate that. I was wondering if there was a more ADF-ish way of handling this.
Using Oracle JDeveloper 11g Release 1 (11.1.1.6.0)
Edited by: user12614476 on Dec 5, 2011 1:58 PM
(added JDeveloper version info)

Are you really using 11.1.1.6? If so, I guess you should be asking in one of the internal Oracle forums.
But, no, there's no "more ADF-ish" way to my knowledge :)
John

OID Newbie - Select all OID users

Similar Messages

Maybe you are looking for